基于Roujean和Ross-Li模型算法的不同户外光照南疆冬枣BRDF特性研究

不同光照下,如何消除或减小反演数据差异,提高检测精度,是目前南疆冬枣户外检测中遇到的一大难题,因此通过用高光谱相机获得的南疆冬枣二向反射分布函数(BRDF)测量值,采用最小二乘法拟合Roujean模型和Ross-Li模型的参数,最后对比Roujean模型和Ross-Li模型反演的结果,提出何种天气何段波长用何种模型反演...     

Production or conservation in CHP networks?

In Sweden, Combined generation of Heat and Power (CHP) is in common practice. Different fuels are burnt in a boiler and the steam is used for generating electricity. The heat that has to be transferred from the condenser in the plant is used in the district heating grid. This grid is thus used as a cooling facility necessary for electricity production. However, energy conservation the Swedish building stock is also encouraged, and if this is utilized in district heated buildings it results in fewer possibilities for electricity production. This might be a major drawback when nuclear power is abolished, as is the result from a consensus some years ago. This paper deals with the question of whether it is better to conserve both heat and electricity, to save only one of the energy forms or if it is cheaper to produce more energy, instead of saving. A case study is presented dealing with Malmö, in the South of Sweden, and it is shown that energy conservation in district heated buildings cannot yield profitability: neither can conservation in the electricity grid, even if it gets closer to profitable savings. It is assumed that the total cost of heating, insulation and electricity is paid by the society and the minimum point for this cost will characterize the best solution.     

Analytical solution for multilayer assembly including heating and cooling cycles with laser pulse parameter variation

Laser heating of surfaces is involved with heating and cooling cycles. Material response to a laser pulse in the heating cycle is rapid while in the cooling cycle it is gradual. In this case, temperature rises rapidly in the heating cycle while temperature decay is gradual in the cooling cycle. Depending on the laser pulse properties (pulse length and intensity), the rise and fall of temperature profiles change in the surface region of the substrate material. In the present study, an analytical solution for laser heating pulse is presented and a closed-form solution for temperature distribution inside the multilayer assembly is obtained. Steel is considered as top layer while copper is situated below steel in the multilayer assembly. It is found that the analytical solution agrees well with the numerical predictions. Temperature rise in steel is higher than copper. This is due to the thickness of steel, which is larger than the absorption depth. In this case, internal energy gain dominates over the heat conduction in the energy transport process.     

Measurement of the dynamic structure function of fluorescently labeled complex fluids by fourier imaging correlation spectroscopy

The dynamics of the kicked rotor, which is a paradigm for a mixed system, where the motion in some parts of phase space is chaotic and in other parts is regular, is studied statistically. The evolution operator of phase space densities in the chaotic component is calculated in the presence of noise, and the limit of vanishing noise is taken in the end. The relaxation rates to the equilibrium density are calculated analytically within an approximation that improves with increasing stochasticity. The results are tested numerically. A global picture is presented of relaxation to the equilibrium density in the chaotic component when the system is bounded and to diffusive behavior when it is unbounded.     

Characterization of some causality conditions through the continuity of the Lorentzian distance

A classical result in Lorentzian geometry states that a strongly causal spacetime is globally hyperbolic if and only if the Lorentzian distance is finite valued for every metric choice in the conformal class. It is proved here that a non-total imprisoning spacetime is globally hyperbolic if and only if for every metric choice in the conformal class the Lorentzian distance is continuous. Moreover, it is proved that a non-total imprisoning spacetime is causally simple if and only if for every metric choice in the conformal class the Lorentzian distance is continuous wherever it vanishes. Finally, a strongly causal spacetime is causally continuous if and only if there is at least one metric in the conformal class such that the Lorentzian distance is continuous wherever it vanishes.     

Quantum correlations in non-inertial cavity systems

Non-inertial cavities are utilized to store and send Quantum Information between mode pairs. A two-cavity system is considered where one is inertial and the other accelerated in a finite time. Maclaurian series are applied to expand the related Bogoliubov coefficients and the problem is treated perturbatively. It is shown that Quantum Discord, which is a measure of quantumness of correlations, is degraded periodically. This is almost in agreement with previous results reached in accelerated systems where increment of acceleration decreases the degree of quantum correlations. As another finding of the study, it is explicitly shown that degradation of Quantum Discord disappears when the state is in a single cavity which is accelerated for a finite time. This feature makes accelerating cavities useful instruments in Quantum Information Theory.     

高掺杂碲基EDFA增益噪声特性的数值模拟

采用四能级理论模型对高掺杂碲基EDFA进行了数值模拟,得出C波段和L波段EDFA的主要增益和噪声系数特性,C+L波段同时放大时,20 dB增益带宽达到85 nm.同时分析了铒离子高掺杂带来的上转换效应对放大增益和噪声性能的影响程度,C波段为4％,L波段为10％,当增大泵浦光功率时,影响程度会更小,采用两段级双向泵浦结构放大时影响仅为0.1％.     

INHOMOGENEOUS WAVES IN ANISOTROPIC POROUS LAYER OVERLYING SOLID BEDROCK

The problem of propagation of inhomogeneous waves in anisotropic porous layered medium is studied using transfer matrix. Firstly, transfer matrix for an anisotropic porous layer is derived. Biot's poro-elastic theory is incorporated to model the acoustics of anisotropic porous layer. The interface between porous layer and elastic half-space is considered as imperfect and modified boundary conditions are applied for this more realistic situation. The theory of transfer matrix is used to derive the analytical expression for the surface impedance. Numerical computation of results is done for different degrees of bonding in the low as well as high-frequency range. In the first case, which is relevant to geophysical studies, the surface impedance is predicted for low-frequency range and surface impedance for second model is computed in high-frequency range. It is observed that loose bondedness is accompanied by the loss of energy at the interface. The technique of transfer matrix is utilized to compute the surface impedance in both cases. The role of surface impedance in seismological studies and in the study of composites is discussed.     

Bose-Einstein condensation and the glassy state

The distinction between a classical glass and a classical liquid is difficult, since both are disordered. The difference is in the fact that a glass is frozen while the liquid is not. In this Letter an equilibrium measure is suggested that distinguishes between a glass and a liquid. The choice of this measure is based on the idea that in a system which is not frozen symmetry under permutation of particles is physically relevant, because particles can be permuted by actual physical motion. This is not the case in a frozen system. In this Letter it is shown how to generalize naturally the quantum mechanical concept of Bose condensed fraction to classical systems in order to distinguish between the glass and the liquid. It is finite in the liquid and zero in the frozen state. The actual value of the condensed fraction in the liquid may serve also as a measure of the glassiness in the liquid.     

Acoustic streaming in a rotating fluid

Acoustic streaming theory is derived that is applicable to a fluid that is slow moving in a reference frame that rotates with a constant angular velocity omega. A simplified streaming equation is obtained for the special case in which the acoustic angular frequency omega is large relative to omega, and the change in fluid density due to rotation alone is negligible. For this special case it is shown that the "driving force" for the acoustic streaming is independent of omega. Thus, if no acoustic streaming is present in a fluid system that is stationary, then no steady-state acoustic streaming is predicted for a similar system that rotates with constant angular velocity. For a system in which acoustic streaming is present, the flow behavior depends on the relative magnitudes of the Coriolis forces and the viscous forces. If the Ekman number is large (that is, the viscous force dominates) then the predicted flow is identical to that which would exist in a stationary system. If, on the other hand, the Ekman number is small then the Coriolis force dominates and the component of flow in the direction of the axis of rotation can be much smaller in the rotating system than in a similar system at rest.     

全光可调移相器的实现机制与实验研究

本文介绍了我们在国内首次研制成功的全光可调移相器,它采用气隙距离调节法,可在光域上直接实现 ps量级的高速光信号相位(时延)调节,最大调整相位量为 600ps,插入损耗 <7dB,调节精度 <0.03ps.对实现光分组交换、光时分复用、光信号处理等具有重要意义.另外,本文还介绍了光信号相位的精密测量方法     

Density profiles and solvation force for a liquid in a slit

Computer simulations and density functional theory results are reported for a Lennard-Jones liquid in a slit or pore formed by two parallel hard walls. Both density profiles and solvation forces are computed. Two classes of calculation are performed. In the first class, a high bulk density is selected and, starting from a high temperature, the temperature is reduced until the temperature corresponding to bulk liquid—vapour coexistence is reached. For small slit widths or exceedingly large widths, the density in the slit decreases continuously until the slit is virtually empty or ‘dry’. When the slit width is somewhat larger than a molecular diameter, but still finite, the density in the slit decreases continuously as the temperature is decreased until there is an abrupt change in the density in the slit. Below this temperature, the density is smaller. Further decreases in the temperature, result in a continuous decrease in the slit density until the slit is virtually empty. In the second class, the density and temperature for bulk coexistence are chosen and the bulk density is increased. At the temperature and bulk density for bulk coexistence, the slit is virtually empty and remains so for all widths that we consider. As the bulk density is increased at constant temperature, the slit remains empty as the width is increased until some specific width is reached and then starts to fill abruptly. The agreement of the density functional and simulation results is qualitative but good.     

沉降分布孔隙率多孔介质模型及数值研究

研究沉降分布孔隙率多孔介质流动和传热,根据"O"形圈理论和现场测定确定孔隙率系数,建立坐标方向孔隙率分布函数;考虑流体密度变化,并引入Brinkman-Forchheimer的扩展Darcy模型,能量方程采用界面连续条件,建立沉降分布孔隙率多孔介质流动和传热求解模型.采用差分法对模型进行离散化,应用高斯-赛德尔方法迭代求解.数值分析表明:沉降分布孔隙率条件下多孔介质内流体流动速度在壁面附近较大,中心部位较小,壁面附近孔隙率的增大使得低流速区域减小,较高流速区域增大;当孔隙率小值时,温度按线性减小;当孔隙率大值时,温度在高低温壁面附近迅速减小,在中部减小较缓,热量按导热和对流共同传递;孔隙率增大能使平均怒谢尔数增大,对流换热作用增强.     

A cell-based study on pedestrian acceleration and overtaking in a transfer station corridor

Pedestrian speed in a transfer station corridor is faster than usual and sometimes running can be found among some of them. In this paper, pedestrians are divided into two categories. The first one is aggressive, and the other is conservative. Aggressive pedestrians weaving their way through crowd in the corridor are the study object of this paper. During recent decades, much attention has been paid to the pedestrians’ behavior, such as overtaking (also deceleration) and collision avoidance, and that continues in this paper. After sufficiently analyzing the characteristics of pedestrian flow in transfer station corridor, a cell-based model is presented in this paper, including the acceleration (also deceleration) and overtaking analysis. Acceleration (also deceleration) in a corridor is fixed according to Newton’s Law and then speed calculated with a kinematic formula is discretized into cells based on the fuzzy logic. After the speed is updated, overtaking is analyzed based on updated speed and force explicitly, compared to rule-based models, which herein we call implicit ones. During the analysis of overtaking, a threshold value to determine the overtaking direction is introduced. Actually, model in this paper is a two-step one. The first step is to update speed, which is the cells the pedestrian can move in one time interval and the other is to analyze the overtaking. Finally, a comparison between the rule-based cellular automata, the model in this paper and data in HCM 2000 is made to demonstrate our model can be used to achieve reasonable simulation of acceleration (also deceleration) and overtaking among pedestrians.     

经验模式分解法在薄膜光谱研究中的应用

应用经验模式分解方法分析薄膜光谱,并且用该方法处理所得的薄膜反射干涉光谱曲线计算薄膜厚度,测量误差为1.51%.证明了经验模式分解方法在光谱信号处理过程中的可靠性.     

Relativity of quantum states in entanglement swapping

The entanglement swapping protocol is analyzed in a relativistic setting, where shortly after the entanglement swapping is performed, a Bell test is performed. For an observer in the laboratory frame, a Bell violation is observed between the qubits with the swapped entanglement. In a moving frame, the order of the measurements is reversed, and a Bell violation is observed even though the particles are not entangled, directly or indirectly, or at any point in time. Although the measurement results are identical, the wavefunctions for the two frames are starkly different — one is entangled and the other is not. Furthermore, for boosts in a perpendicular direction, in the presence of decoherence, we show that the maximum Bell violation can occur across non-simultaneous points in time. This is a signature of entanglement that is spread across both space and time, showing both non-local and non-simultaneous aspects of entanglement.     

The Performances of the Antennas in Active/Passive Compounded Guidance Part II: Compounded Antennas Schemes and Performances of Active/Passive Guidance

The second part of a two-part paper discusses two kinds common-caliber compound antennas techniques for active/passive guiding system. One is the triple-antenna compound technique which two spiral antennas are utilized to find the direction of a radiative source in passive amplitude-phase monopulse subsystem and the other is used in pulse-radar. The next is the double-antenna technique which one antenna is for passive amplitude-monopulse direction-finding and the another is for pulse-radar. The mutual influence among these antennas is analysed in details and the better one in the scheme is pointed out finally in this paper.     

轻型车载大口径光电跟测系统光学设计

设计了一套能实现机动式布站的大口径车载可见光、红外、激光光电跟踪测量光学系统。其主光学系统采用共口径光谱分光方式工作,系统有效口径1.2m,各成像通道成像质量均达到衍射极限;捕获电视系统采用连续变焦距光学系统,视场范围0.31°～4.57°;激光测距通道设计作用距离达20km。光学设计结果表明,此套光学系统能够用于空中和空间目标的运动轨迹、成像测量和实况景象记录。     

新型1×N多模干涉分束器的三维设计与模拟

相比于传统的1×N对称型多模干涉（Mult-Mode Interference,MMI）分束器设计,提出了一种新型埋入式弱限制光波导分束器件.它的干涉区及输入输出波导采用倒锥形式,器件尺寸减小,且不均匀性与附加损耗也减小.以1×4的对称型MMI分束器为例,当只对干涉区采用倒锥形结构后,在TE偏振中心波长为1.55 μm时,器件长度减小了500 μm,均匀性增加了0.131 dB,而附加损耗仅增加了0.02 dB,波长响应较传统设计增加了40 nm.在此基础上,又在输入输出臂上也各增加倒锥形结构后,相比于传统设计附加损耗减小了0.02 dB,均匀性增加了0.139 dB,器件长度减小了500 μm.改进后的器件具有优越的容差性.器件采用掺氟型聚合物材料进行优化设计,通过在合理范围内偏离输出波导位置,使输出光强达到最大值.     

Laser short pulse heating: Influence of pulse intensity on temperature and stress fields

Laser short-pulse heating of gold surface is considered and the influence of laser pulse intensity on the temperature and stress fields is investigated. Laser step input pulses with different pulse lengths and the same energy content are employed in the simulations. The electron kinetic theory approach employing thermomechanical coupling is introduced to model the non-equilibrium energy transport in the electron and lattice sub-systems. Thermal stress development in the lattice sub-system and temperature rise in the lattice and electron sub-systems are computed. It is found that electron temperature rises rapidly while lattice site temperature rise is gradual in the early heating period, which is more pronounced for high intensity pulses. Thermal stress component in the axial direction is compressive and its magnitude is considerably less than the yielding limit of the substrate material.