Gold Nanoparticle Assemblies on Surfaces: Reactivity Tuning through Capping‐Layer and Cross‐Linker Design

The immobilization of metal nanoparticles (NPs) with molecular control over their organization is challenging. Herein, we report the formation of molecularly cross‐linked AuNP assemblies using a layer‐by‐layer approach. We observed four types of assemblies: 1) small aggregates of individual AuNPs, 2) large aggregates of individual AuNPs, 3) networks of fused AuNPs, and 4) gold islands. Interestingly, these assemblies with the different cross‐linkers and capping layers represent different stages in the complete fusion of AuNPs to afford islands of continuous gold. We demonstrate that the stability toward fusion of the nanoparticles of the on‐surface structures can be controlled by the reactivity of the cross‐linkers and the hydrophilicity/hydrophobicity of the nanoparticles.     

Influence of gold nanoparticle size (2-50 nm) upon its electrochemical behavior: an electrochemical impedance spectroscopic and voltammetric study

The electrochemical behavior of different size gold nanoparticles (AuNPs) was investigated. AuNPs with 2, 5, 10, 15, 20 and 50 nm diameters were immobilized onto a screen printed carbon electrode surface by physical adsorption. The impedimetric response was measured for different diameter AuNPs at a fixed value of their surface area, at the same content of gold (Au) and at the same concentration. In a further experiment, the impedimetric response toward AuNP concentration was measured for each diameter. Impedimetric results were compared with results obtained for the detection of Au by stripping voltammetry. Additionally, variability of active surface area and roughness of different electrodes before and after immobilization of AuNPs were carefully evaluated by means of cyclic voltammetry and laser scanning microscopy. Electrochemical impedance spectroscopy (EIS) is a sensitive technique capable of differentiating the signal generated by AuNPs of different sizes, thus providing useful information for the employment of AuNPs in electrochemical biosensors.     

Photoisomerization of azobenzene derivatives confined in gold nanoparticle aggregates

Photoisomerization is an important reaction that confers photoresponsive functionality on nanoparticles. Although photoisomerization of molecules forming self-assembled monolayers on two-dimensional surfaces or three-dimensional clusters has been studied, a detailed picture of interactions of molecules undergoing isomerization with nanoparticles is not available. In this paper, we report on the photoisomerization of azobenzene derivatives spatially confined in gold nanoparticle (AuNP) aggregates. AuNP aggregates allow us to simultaneously probe the structural changes of molecules via surface-enhanced Raman spectroscopy (SERS) and the accompanying changes in interparticle interactions via surface plasmon couplings. AuNP aggregates are formed by the adsorption of synthesized azobenzene-derivatized sulfides (Az) onto the surfaces of AuNPs. The photoisomerization of the adsorbed Az from trans to cis by excitation at 365 nm causes the AuNPs to move close to each other in the aggregates, leading to a redshift of the surface plasmon coupling band in the UV-vis spectra and a concomitant rise in SERS intensity. SERS spectra reveal that the vibrational modes containing the N=N stretching character redshift upon irradiation, suggesting that the N=N bond is significantly weakened when Az is in the cis form in the AuNP aggregates. The weakening of the N=N bond is attributed to the interaction of the N=N bond, which is more exposed to the outside in the cis conformation, with the nearby AuNPs that have come closer by the isomerization of adsorbed Az. We find that backisomerization from cis to trans occurs much faster in the AuNP aggregates (k = 1.9 × 10(-2) min(-1)) than in solution (k = 1.3 × 10(-3) min(-1)) because of the reduced N=N bond order of cis-Az in the aggregates.     

金纳米粒子组装结构中的表面重组现象

以纳米粒子为基本结构单元构筑的各种二维或三维超晶格结构受到了广泛的重视［１］．人们的兴趣一方面来源于在纳米尺度上控制材料结构 ,另一方面则因为组织化的纳米材料或结构具有独特的性质 ,以期在非线性光学、纳米电子学等前沿领域得到应用［２］．当前研究最多的结构形式是固体表面上的纳米粒子阵列或单层薄膜 ,通常是胶体粒子靠某种特殊相互作用吸附或沉积在固体表面上（亦称为“纳米粒子在表面上的组装［３］”） ,因此对纳米粒子及固体表面进行功能化的修饰 ,从而控制纳米粒子在表面上的排列和聚集状态 ,是制备这类复合结构的核心问…     

Structural organization of gold nanoparticles onto the ITO surface and its optical properties as a function of ensemble size

Self-assembly of citrate-stabilized gold nanoparticles (AuNPs) onto an optically transparent indium tin oxide (ITO) surface followed by neutralization of these particles using dodecanethiol as a surfactant have been demonstrated. X-ray photoelectron spectroscopic (XPS) studies revealed the partial removal of citrate ions from the immobilized AuNPs, which advances the dilution of electrostatic attraction between AuNPs and the APS (amino-terminated monolayer)-functionalized ITO surface. The resultant AuNPs restore their mobility to some extent and form small ensembles. Some of the immobilized AuNPs were completely removed from the surface due to neutralization, as confirmed by XPS studies. Interparticle distance and size of ensembles were manipulated by consecutive cycles of immobilization and neutralization of AuNPs. Controlled nanostructural fabrication progression, which leads to two-dimensional lateral growth of AuNPs, provides a method for systematically shifting the surface plasmon resonance band based on the increase in plasmon coupling among the closely placed AuNPs of an ensemble. The magnitude of shift increases with the size of ensemble. This manipulated chemical strategy offers a convenient and simple method to tune the optical properties of materials on a nanoscale.     

Selective surface activation of a functional monolayer for the fabrication of nanometer scale thiol patterns and directed self-assembly of gold nanoparticles

Application of a voltage bias between the tip of an atomic force microscope (AFM) and a silicon substrate causes the localized modification of a specially designed self-assembled monolayer (SAM), transforming a surface-bound thiocarbonate into a surface-bound thiol. The resulting surface-bound thiols are used to direct the patternwise self-assembly of gold nanoparticles (AuNPs). This methodology is applied to deposit individual AuNPs onto a surface with nanometer precision and to produce 10 nm lines of closely spaced AuNPs that are a single nanoparticle in width.     

The preparation and characterization of poly(o-phenylenediamine)/gold nanoparticles interface for immunoassay by surface plasmon resonance and electrochemistry

The poly-o-phenylenediamine (PoPD) nonconducting film and gold nanoparticles (AuNPs) were combined to fabricate AuNPs/PoPD film, which is used as a novel biocompatible interface for the immobilization of antibody and develop a simple and sensitive label-free immunoassay for the detection of the related antigen (human immunoglobulin G (IgG)). Surface plasmon resonance (SPR) and electrochemical methods were used to provide the real-time information about the polymer film growth, assembling of various sizes of gold nanoparticles, anti-human IgG antibody (anti-hIgG) immobilization and the antigen–antibody interaction. The microstructures of the PoPD and AuNPs/PoPD films were characterized by atomic force microscopy (AFM). These results demonstrated that AuNPs were uniformly dispersed on the porous surface of PoPD film, which formed a nano-structure biocompatible AuNPs/PoPD interface. The use of gold nanoparticles and PoPD film could enhance the immunoassay sensitivity and anti-nonspecific property of the resulting immunoassay electrode. Additionally, the reproducibility and preliminary application of anti-hIgG/AuNPs/PoPD/Au electrode for SPR detection of hIgG was also evaluated.     

An ionic surfactant-mediated Langmuir-Blodgett method to construct gold nanoparticle films for surface-enhanced Raman scattering

A gold nanoparticle film for surface-enhanced Raman scattering (SERS) was successfully constructed by an ionic surfactant-mediated Langmuir-Blodgett (LB) method. The gold film was formed by adding ethanol to a gold colloid/hexane mixture in the presence of dodecyltrimethylammonium bromide (DTAB). Consequently, gold nanoparticles (AuNPs) assembled at the water/hexane interface due to the decrease in surface charge density of AuNPs. Since DTAB binds the gold surface by a coulombic force, rather than a chemical bonding, it is easily replaced by target molecules for SERS purposes. The SERS enhancement factor of the 80 nm gold nanoparticle film was approximately 1.2 × 10(6) using crystal violet (CV) as a Raman dye. The SERS signal from the proposed DTAB-mediated film was approximately 10 times higher than that from the octanethiol-modified gold film, while the reproducibility and stability of this film compared to an octanethiol-modified film were similar. This method can also be applied to other metal nanostructures to fabricate metal films for use as a sensitive SERS substrate with a higher enhancement factor.     

In situ immobilizing of gold nanoparticles onto the surface of alumina particles

In this work, gold nanoparticles (AuNPs) were attached to the surface of alumina particles by an in situ immobilizing method. This modified colloidal deposition method allowed the immobilization of AuNPs with a much greater loading amount compared to the conventional one.     

A novel strategy for immobilization of thionine based on calcium carbonate-gold nanoparticles inorganic hybrid composite and its application in hydrogen peroxide sensor

A novel strategy for efficient immobilization of electroactive Thionine(Th)on the gold(Au)electrode surface based on calcium carbonate-gold nanoparticles(CaCO3-AuNPs)inorganic hybrid composite was proposed and conducted by the strong electrostatic interaction between positively charged Th and negatively charged CaCO3-AuNPs composite.The hybrid composite was obtained by the adsorption of AuNPs onto the surface of CaCO3 microspheres through electrostatic interaction.Due to the microporous architecture,large s...     

Construction of simple gold nanoparticle aggregates with controlled plasmon–plasmon interactions

We have developed a colloidal assembly for the study of plasmon–plasmon interactions between gold nanoparticles. Colloidal aggregates of controlled size and interparticle spacing were synthesized on silica nanoparticle substrates. Following the immobilization of isolated gold nanoparticles onto silica nanoparticles, the surfaces of the adsorbed gold nanoparticles were functionalized with 4-aminobenzenethiol. This molecular linker attached additional gold nanoparticles to the ‘parent' gold nanoparticle, forming small nanoparticle aggregates. The optical absorption spectrum of these clusters differed from that of gold colloid in a manner consistent with plasmon–plasmon interactions between the gold nanoparticles.     

Vibrational spectroscopic characterization of 4-acylamidobenzenethiol-stabilized gold nanoparticles

A simple preparation method of gold nanoparticles (AuNPs) with 4-acylamidobenzenethiol derivative (BD) was improved to obtain the larger size of AuNPs which exhibited localized surface plasmon resonance. The spectroscopic characterizations of two kinds of BD-stabilized AuNPs were carried out by means of ATR-FTIR and Raman spectroscopy in order to clarify the conformation and orientation of BDs adsorbed on AuNPs. The relation between the stability of AuNPs and the adsorbed states of BDs were also discussed. The average sizes of the resulting AuNPs were 18 nm for BD1 and 30 nm for BD2, respectively. It was found that the BD1-capped AuNPs formed large aggregates. The results of vibrational spectroscopy revealed that loosely packed self-assembled monolayer (SAM) of BD1 molecules was formed on the surface of the AuNPs; on the other hand, densely packed SAM was formed in the case of BD2. We concluded the difference behavior between the two types of molecules was caused by the functional groups. The sulfuryl groups of BD2 induced highly ordered SAM and suppressed aggregate formation of AuNPs.     

Rational nanoconjugation improves biocatalytic performance of enzymes: aldol addition catalyzed by immobilized rhamnulose-1-phosphate aldolase

Gold nanoparticles (AuNPs) are attractive materials for the immobilization of enzymes due to several advantages such as high enzyme loading, absence of internal diffusion limitations, and Brownian motion in solution, compared to the conventional immobilization onto porous macroscopic supports. The affinity of AuNPs to different groups present at the protein surface enables direct enzyme binding to the nanoparticle without the need of any coupling agent. Enzyme activity and stability appear to be improved when the biocatalyst is immobilized onto AuNPs. Rhamnulose-1-phosphate aldolase (RhuA) was selected as model enzyme for the immobilization onto AuNPs. The enzyme loading was characterized by four different techniques: surface plasmon resonance (SPR) shift and intensity, dynamic light scattering (DLS), and transmission electron microscopy (TEM). AuNPs-RhuA complexes were further applied as biocatalyst of the aldol addition reaction between dihydroxyacetone phosphate (DHAP) and (S)-Cbz-alaninal during two reaction cycles. In these conditions, an improved reaction yield and selectivity, together with a fourfold activity enhancement were observed, as compared to soluble RhuA.     

High performance bioanode based on direct electron transfer of fructose dehydrogenase at gold nanoparticle-modified electrodes

The direct electron transfer reaction of fructose dehydrogenase (FDH) from Gluconobacter sp. on alkanethiol-modified gold nanoparticles (AuNPs) was examined. AuNP-modified electrodes were simply fabricated by depositing citrate-reduced gold nanoparticles onto a gold electrode and carbon fiber paper and then covering the surface with a self-assembled monolayer of alkanethiols. The immobilization of AuNPs provided a large effective surface area for the adsorption of FDH. Catalytic oxidation currents based on the direct electron transfer reaction of FDH were observed from a potential about ?100 mV (vs. Ag/AgCl, 3 M NaCl) in the presence of d-fructose without a mediator. The current density reached as high as 14.3 ± 0.93 mA/cm² (at +500 mV), which was achieved in the presence of 200 mM d-fructose by immobilization of FDH on 2-mercaptoethanol-modified AuNP/carbon fiber paper electrodes.     

Morphological and electrical characteristics of amino acid–AuNP nanostructured two-dimensional ensembles

The interaction between amino acids (l-cysteine, l-lysine) and gold nanoparticle layers deposited on ITO glasses was investigated. The citrate capped gold nanoparticles (AuNP) were first deposited as a thin layer onto silanized ITO and subsequently linked with an amino acid, due to strong affinity of thiol and amine groups to gold. The gold nanoparticles had an elliptical shape, with size varying between 7 and 14 nm, as indicated by TEM analysis. After deposition on ITO substrate, the nanoparticles self-assembled into large aggregates with poor contact between, as revealed by AFM. After linking l-cysteine or l-lysine to the surface of nanoparticles layer, a change in morphology occured. A better contact between the gold aggregates boundary developed, which improved the conducting properties of the nanostructured layer. The electrical resistance of the AuNPs layer, obtained from I–V measurements, was very high (2.8 × 10¹³ Ω) and slightly decreased after linking the NPs with amino acids.     

Nanocomposites of nanocrystalline cellulose for enzyme immobilization

We describe the synthesis, characterization and use of a composite material made of a renewable source and metallic nanoparticles for biosensing applications. Nanocrystalline cellulose (NCC) is a product isolated from natural cellulose fibers, which is of approximately 100 nm long and 10 nm wide in size. We augmented the surface area and tailored the chemical affinity of NCC by optimally dressing it with gold nanoparticles (AuNPs). The deposition of AuNPs on NCC was controlled by using cationic polyethylenimine (PEI) at different pHs. AuNPs were thiol-functionalized using different linkers prior to enzyme immobilization. The enzyme (glucose oxidase or GOx) was conjugated on the composite by carbodiimide coupling, and subsequent activation of linker-carboxylic acid group. Our results showed that GOx was attached to the surface of the NCC nanocomposite. Moreover, the amount of GOx loaded onto the support depended on the length of the thiol-linker used. The lower value (20.3 mg/mg of support) was obtained with the longer thiol-linker (11 carbon chain) compared to 25.2 mg/mg of support for the smaller thiol-linker (3 carbon chain).     

Guanine/Ionic Liquid Derived Ordered Mesoporous Carbon Decorated with AuNPs as Efficient NADH Biosensor and Suitable Platform for Enzymes Immobilization and Biofuel Cell Design

Guanine‐ionic liquid derived ordered mesoporous carbon (GIOMC) decorated with gold nanoparticles was used as electrocatalyste for NADH oxidation and electrochemical platform for immobilization of glucose dehydrogenase (GDH) enzyme. The resulting GIOMC/AuNPs on the glassy carbon electrode can be used as novel redox‐mediator free for NADH sensing and this integrated system (GIOMC/AuNPs/GDH) shows excellent electrocatalytic activity toward glucose oxidation. Furthermore, the ionic liquid derived ordered mesoporous carbon derivate with Ph‐SO₃H (IOMC‐PhSO₃H) decorated with AuNPs has been developed to bilirubin oxidase enzyme (BOD) immobilization and the GC/IOMC‐PhSO₃H/BOD integrated system shows excellent bioelectrocatalytic activity toward oxygen reduction reaction. The proposed mesostructured platforms decorated by AuNPs have been developed to enhance mass transfer and charge transfer from biocatalyst to electrode, leading these bioanode and biocathode used for biofuel cell assembly. Integration designed bioanode and biocathode yielding a membrane‐less glucose/O₂ biofuel cell with power density of 33 (mW.cm⁻²) at 257 mV. The open circuit voltage of this biofuel cell and maximum produced current density were 508 mV and 0.252 (mA.cm⁻²) respectively.     

A novel electrochemical method to detect mercury (II) ions

A novel and sensitive electrochemical method for determination of mercury (II) ions (Hg²⁺) based on the formation of thymine–Hg²⁺–thymine complexes and gold nanoparticle-mediated signal amplification is reported. Two 5′ end thiolated complementary oligonucleotides containing six strategically placed thymine–thymine mistakes were introduced in this work. One of the two oligonucleotides was immobilized on a gold electrode and the other one on gold nanoparticles (AuNPs). Due to six thymine–thymine mistakes the two oligonucleotides were not able to be hybridized, so AuNPs could not be immobilized onto the electrode surface after the electrode was immersed in the DNA–AuNPs solution. However, if Hg²⁺ existed, T–Hg²⁺–T complexes could be formed and AuNPs could be immobilized onto the electrode surface. Meanwhile, large numbers of [Ru(NH₃)₆]³⁺ molecules as electrochemical species could be localized onto the electrode surface. The Hg²⁺ detection limit of this assay could be as low as 10 nM, which is the US Environmental Protection Agency (EPA) limit of Hg²⁺ for drinkable water. This method is proven to be simple, convenient, high sensitive and selective.     

Immobilization of Recombinant Human Catalase on Gold and Silver Nanoparticles

Human catalase cDNA was cloned into a pEX-C-His vector. Purified recombinant catalase was immobilized on nanoparticles. Gold and silver nanoparticles were synthesized in a variety of sizes by chemical reduction; no agglomerates or aggregates were observed in any of the colloids during dynamic light scattering or scanning transmission electron microscopy analysis. After immobilization on gold nanoparticles, recombinant catalase activity was found to be lower than that of the same amount of enzyme in aqueous solution. However, after 10 days of storage at room temperature, the activity of catalase immobilized on gold nanoparticles (AuNPs) of 13 and 20 nm and coverage of 133% was 68 and 83% greater than catalase in aqueous solution, respectively. During 10 days of experiment, percentage activity of catalase immobilized on those gold nanoparticles was higher in comparison to CAT in aqueous solution. Catalase immobilized on silver nanoparticles did not lose activity as significantly as catalase immobilized on AuNPs. Those results confirm the ability to produce recombinant human enzymes in a bacterial expression system and its potential use while immobilized on silver or gold nanoparticles.     

Gold nanoparticles attached NH2+ ion implantation-modified indium tin oxide electrode: Characterization and electrochemical studies

An NH2+ ion implantation-modified indium tin oxide film was prepared and the implantation of amino groups on the indium tin oxide substrate was verified by X-ray photoelectron spectroscopy analysis.The gold nanoparticles attached surface could be obtained by self-assembly of different sized colloidal gold nanoparticles onto the NH2+ ion implantation-modified indium tin oxide surface.By scanning electron microscopy and electrochemical techniques,the as-prepared AuNPs attached NH2+ ion implantation-modified indium tin oxide electrode was characterized and compared with bare indium tin oxide electrode.Using a [Fe(CN)6]3 /[Fe(CN)6]4 redox probe,the increasingly facile heterogeneous electron transfer kinetics resulting from the attached gold nanoparticle arrays was observed.The gold nanoparticle arrays exhibited high catalytic activity toward the electro-oxidation of nitric oxide,which could provide electroanalytical application for nitric oxide sensing.