Thermal analysis of lithium peroxide prepared by various methods

Behavior of lithium peroxide samples at heating in air was studied by the methods of thermogravimetric analysis (TGA) and differential thermal analysis (DTA). In the temperature range from 32 to 82°C all the studied samples we found to react with water vapor forming lithium peroxide monohydrate as confirmed by the methods of chemical analysis and of qualitative X-ray phase analysis. It was found experimentally that in the temperature range from 340 to 348°C lithium peroxide began to decompose into lithium oxide and oxygen, the starting temperature depended on the method of preparation of lithium peroxide. For all the studied samples polymorphism in the temperature range from 25 to 340°C was not detected.     

Thermal analysis of alumina precursors prepared by ‘PFHS’ methods

Thermal analysis of alumina precursors prepared by two different PFHS (precipitation from homogeneous solution) methods and a conventional method is described. All three precursors exhibit distinct thermal behaviour patterns, marked by multiple phase transformations, to yield-Al₂O₃ ultimately. Thermal analysis studies, coupled with XRD, IR and elemental analysis data, indicate that the precursors obtained by the PFHS methods are monophasic in nature, and hence yield relatively small, uniform microspheroidal alumina in comparison with the alumina obtained by the conventional method.

---

Zusammenfassung Die Thermoanalyse von Aluminiumoxidpräkursoren, hergestellt durch zwei verschiedene PFHS (Precipitation From Homogeneous Solution) und eine herkömmliche Methode, wurde beschrieben. Alle drei Präkursoren zeigen ausgeprägte thermische Verhaltensformen, gekennzeichnet durch Mehrfachphasenübergange zur letztendlichen Bildung von-Al₂O₃. Die Thermoanalysen, verbunden mit Röntgendiffraktions-, Infrarot- und Elementaranalysen zeigen, dass die durch PFHS-Methoden erhaltenen Präkursoren über Einphasen verfügen und verglichen zu herkömmlich hergestelltem Aluminiumoxid relativ kleines, einheitliches Kugelaluminiumoxid liefern.

---

« » , - , . «» , -l₂₃. , , , « », , , .

---

---

One of us BSM thanks the University Grants Commission, India, for the award of a Research Fellowship.     

Thermal and flammability properties of polyethersulfone/halloysite nanocomposites prepared by melt compounding

This paper presents a study of polyethersulfone (PES)/halloysite nanotube (HNTs) nanocomposites prepared by melt compounding either through a simple extrusion process or via a water-assisted extrusion procedure. Scanning and transmission electron microscopy techniques are combined with rheological measurements to assess the influence of polymer end groups (–Cl or –OH) and water injection on the HNTs dispersion state. A morphological transition form microcomposite to nanocomposite is achieved when replacing –Cl chain ends of PES by –OH groups, especially when water is injected during processing. By a combination of Soxhlet extraction and thermogravimetric analysis, we show that some PES(OH) chains are covalently bonded onto the aluminosilicate surface during extrusion. A mechanism describing the physico-chemical action of water is presented. The best system in terms of clay dispersion has been retained to characterize PES-HNTs nanocomposites with respect to their thermo-mechanical, thermal and fire (mass loss calorimetry and UL-94) properties. Dynamic mechanical analysis shows a significant enhancement in the storage modulus of halloysite-based nanocomposites when compared to the unfilled matrix. The improved thermal and thermo-oxidative stability of PES in presence of HNTs is mainly attributed to the labyrinth effect provided by individually dispersed nanotubes, which is reinforced during the decomposition process by the formation of a protective charred ceramic surface layer. The mechanism of action of HNTs for fire retardancy of PES presumably arises from a synergistic effect between physical (i.e. ceramic-like structure formation and mechanical reinforcement of the intumescent char) and chemical (i.e. charring promotion) processes taking place in the condensed phase. According to this study, the straightforward and cost-effective melt compounding route could pave the way for future development of high-performance nanoscale polymeric materials combining enhanced thermal properties and excellent flame retardant behaviour.     

Thermal analysis and EPR study of copper species in mordenites prepared by conventional and microwave-assisted methods

The main work of this thesis is to study and discuss flame-retardant properties of the flexible polyurethane foam (FPUF) added with borax, expanded graphite (EG), and EG/Borax as flame retardant, respectively. The thermal behavior of samples has been using thermogravimetry (TG) and differential thermogravimetry in air. The activation energies for different stages of thermal degradation are obtained following the equation of Kissinger. The flammability parameters, including limiting oxygen index, rate of heat release, total heat release, yield of CO, yield of CO₂, and smoke production rate, were recorded simultaneously. The char structure was studied by SEM, and their thermal stability and evolved gaseous products were examined by TG analysis–Fourier transform infrared spectroscopy. By analyzing these data, it was concluded that most combustion parameters of FPUF were decreased by the treatment, especially for EG/Borax treatment, which indicated a synergistic effect of flame retardancy. Meanwhile, the probable flame retardation mechanism was proposed.     

Thermal degradation and combustion behavior of the polyethylene/clay nanocomposite prepared by melt intercalation

Studies of thermal and fire-resistant properties of the polyethylene/organically modified montmorillonite (PE/MMT) nanocomposites prepared by means of melt intercalation are discussed. The sets of the data acquired with the aid of non-isothermal TG experiments have been treated by the model kinetic analysis. The extra acceleration of thermal-oxidative degradation of the nanocomposite which has been observed at the first stage of the overall process has been analyzed and is explained by the catalytic effect of the clay nanoparticles. The results of cone calorimetric tests lead to the conclusion that char formation plays a key role in the mechanism of flame retardation for nanocomposites.     

Development and evaluation of orally disintegrating tablets (ODTs) containing Ibuprofen granules prepared by hot melt extrusion

In the current study Ibuprofen was embedded in a methacrylate copolymer (Eudragit^® EPO) matrix to produce solid dispersions by hot-melt extrusion (HME) processing. The obtained granules were incorporated in orally disintegrating tablets (ODTs). The tablets were developed by varying the ratio of superdisintegrants such as sodium croscarmellose and crosslinked polyvinylpyrrolidone grades while a direct compression process was used to compress the ODTs under various compaction forces to optimize tablet robustness. The properties of the compressed tablets which included porosity, hardness, friability and dissolution profiles were further evaluated and compared with Nurofen^® Meltlet ODTs. The taste and sensory evaluation in human volunteers demonstrated excellence in masking the bitter active and improved tablet palatability.     

Binding analysis of farrerol to lysozyme by spectroscopic methods

Binding of farrerol to lysozyme (LYSO) was investigated at 302, 313 and 318 K at pH 7.4 using spectrophotometric techniques such as fluorescence emission, circular dichroism (CD) and UV absorption. The data obtained from fluorescence quenching experiments showed that farrerol was bound to LYSO and the affinity was enhanced by the addition of farrerol. When the concentration ratio of farrerol to LYSO was higher than 5.4, both the binding constant and the binding stoichiometry went up. Based on the thermodynamic parameters evaluated from the van't Hoff equation, the enthalpy change (deltaH degrees ) and entropy change (deltaS degrees ) were derived to be negative values. They indicated that both van der Waals forces and hydrogen bonds are the major interactions between farrerol and LYSO. A value of 2.67 nm for the average distance r between farrerol (acceptor) and tryptophan residues (Trp) of LYSO (donor) was derived from the fluorescence resonance energy transfer. Besides, the change in the conformation of LYSO was observed, being caused by the interaction with farrerol.     

Thermal analysis of cyclodextrins and their inclusion compounds

This review examines the literature concerning the thermal properties of natural and semisynthetic cyclodextrins and their inclusion compounds. Particular emphasis is given to recent results of investigations by thermal methods of the hydrated forms of cyclodextrins. The limitations and advantages of the applications of thermal analyses concerning water- and drug-cyclodextrin interactions are also discussed.     

Thermal and spectroscopic analysis of natural trioctahedral chlorites

A set of seven natural trioctahedral chlorites have been studied. Thermogravimetric techniques and infrared spectroscopy were used to determine the thermal dehydroxylation of the samples. Relationships between the compositions of the chlorites and their thermograms were established. A kinetic analysis was also undertaken.

---

Zusammenfassung Es wurde eine Reihe von sieben natürlichen trioktaedrischen Chloriten untersucht. Mittels TG-Techniken und IR-Spektroskopie wurde die thermische Dehydroxylierung der Proben untersucht. Es konnten ZusammenhÄnge zwischen der Zusammensetzung der Chlorite und ihrer Thermogramme festgestellt werden. Weiterhin wurde eine kinetische Analyse vorgenommen.

---

---

The authors thank the Museum of Natural History in Paris and the Museum of Natural Science in Bern for providing the samples studied.     

Thermal decomposition of β-cyclodextrin and its inclusion complex with vitamin E

1. Download : Download high-res image (133KB)
2. Download : Download full-size image

     

Thermal analysis of complex fluorides

A number of fluorometallates has been investigated by thermal analysis to establish the decomposition stoichiometry and to determine the conditions where stable intermediate phases can be isolated. The decomposition reactions of fluorovanadates depend on the atmosphere. For ammonium hexafluorometallates and potassium pentafluoroaquametallates the decomposition temperatures or enthalpies can be correlated to crystal field stabilization energies.     

NMR spectroscopic study of the inclusion complex of desloratadine with β-cyclodextrin in solution

Desloratadine (DES) is an antihistamine used in the treatment of allergies and chronic urticaria. ¹H NMR spectroscopic study of varying ratios of DES and β-Cyclodextrin (β-CD) in D₂O suggests the formation of a 1:1 inclusion complex formed by the penetration of Cl-substituted aromatic ring into the β-CD cavity. The stoichiometry and binding constant of the complex were determined by Scott’s method.     

Thermal decomposition of humboldtine: A high resolution thermogravimetric and hot stage Raman spectroscopic study

Evidence for the existence of primitive life forms such as lichens and fungi can be based upon the formation of oxalates. These oxalates form as a film like deposit on rocks and other host matrices. Humboldtine as the natural iron(II) oxalate mineral is a classic example. Thermogravimetry coupled to evolved gas mass spectrometry shows dehydration takes place in two steps at 130 and 141°C. Loss of the oxalate as carbon dioxide occurs at 312 and 332°C. Dehydration is readily followed by Raman microscopy in combination with a thermal stage and is observed by the loss of intensity of the OH stretching vibration at 3318 cm^-1. The application of infrared emission spectroscopy supports the results of the TG-MS. Three Raman bands are observed at 1470, 1465 and 1432 cm^-1 attributed the CO symmetric stretching mode. The observation of the three bands supports the concept of multiple iron(II) oxalate phases. The significance of this work rests with the ability of Raman spectroscopy to identify iron(II) oxalate which often occurs as a film on a host rock.This revised version was published online in November 2005 with corrections to the Cover Date.     

Thermal and spectroscopic analysis of florfenicol irradiated in the solid-state

The study has been undertaken to check the effect of ionising radiation on the physical and chemical properties of florfenicol, an antibiotic of a wide range of antibacterial activity. The solid-state samples were subjected to an electron beam generated by accelerator corresponding to the doses of 25, 100 and 400 kGy, and the effect of the exposure was analysed by the methods not requiring changes in the state (with no preliminary treatment), such as SEM, DSC, FTIR, XRD, EPR and HPLC. Florfenicol irradiated with a dose of 25 kGy has not changed the form or colour, however, a small increase in intensity of some absorption bands in the FTIR spectrum and of some peaks in the XRD pattern, a decrease in the melting point by 0.6°C, the appearance of free radicals and a loss in the FF content within the error of the method (0.91%) have been observed. After irradiation with greater doses (100 and 400 kGy) the changes have intensified, yellow discolouration appeared and the loss of FF content has increased to 6.39%. As follows from the results, the compound studied in solid-state undergoes radiolysis after e-beam irradiation in the doses ≥25 kGy, but lower doses (15–20 kGy) can be applied for its decontamination or sterilization with no adverse effect on its physico-chemical properties.     

Thermal analysis and spectroscopic studies of electrospun nano-scale composite fibers

The aim of this article is to develop nano-scale composite fibers from wood pulp, modified wood pulp, and polyethylene oxide (PEO). Composite fibers were developed in the diameter range of 339–612 nm. Alignment process of the composite fibers was done by electrostatic interactions between two collector disks. DSC results demonstrated a lower melting temperature of composite fibers than PEO powder. The development of crystalline structure in the composite fibers and acetylated wood pulp was poor. Thermogravimetric analysis revealed that the thermal stability of composite fibers were relatively lower than PEO powder. Fourier transform infrared spectroscopy (FTIR) showed significant differences between modified and unmodified wood pulp in the region of 960–1746 cm⁻¹. The peak intensity of acetylated wood pulp was appeared at 1746 cm⁻¹ because of acetyl groups. The composite fibers demonstrated the characteristic peak of PEO since less wood pulp was incorporated in the composite system.     

A spectroscopic study of the inclusion of azulene by beta- and gamma-cyclodextrins

The inclusion of azulene (AZ) inside the cavities of beta-cyclodextrin (beta-CD) and gamma-cyclodextrin (gamma-CD) was studied using absorption, fluorescence and induced-circular dichroism spectroscopy. The inclusion of AZ into the cavity of beta-CD has a stoichiometry of 1:1, whereas that of AZ/gamma-CD complex is 1:2. The equilibrium constants for the formation of the two complexes were calculated to be 780+/-150 M(-1) for AZ:beta-CD and (4.5+/-0.86)x10(5) M(-2) for AZ:(gamma-CD)(2). The latter is due to a stepwise equilibrium mechanism in which a 1:1 complex is formed with a binding constant of 775 M(-1), followed by the formation of a 1:2 complex with a binding constant of 580 M(-1). The difference between the two binding constant values is slight, indicating an almost equal contribution from each of the gamma-CD molecules to the overall binding in AZ:(gamma-CD)(2). From the induced-circular dichroism spectra, the inclusion of AZ was found to be axial in AZ:beta-CD and nearly axial in AZ:(gamma-CD)(2).     

Multielement analysis of groundwater samples by neutron activation with comparison between direct and evaporation methods

This report is the results of the studies on NAA of groundwater samples with comparison between direct and evaporation methods, and of the applications for the samples of alluvium plain composed with granitiform soils and of Neogene strata composed with clay minerals.     

Structure and spectroscopic properties of cyclodextrin inclusion complexes

We compare spectroscopic properties of higher order complexes of organic guests (e.g. naphthalene, phenols, indole, C₆₀ fullerene) with cyclodextrins (CDx) to results of molecular modeling investigations. Naphthalene 1:2 complexes with -CDx show high spectral resolution and peculiar triplet properties. Molecular simulations and calculation of the experimentally measured induced circular dichroism (ICD) provide detailed structural information.     

Thermal analysis and microstructural characterization of ceramic green tapes prepared by aqueous tape casting

In this study, aqueous lead magnesium niobate (PMN) slurry formulations were developed for tape casting using a poly(acrylic acid) - poly(ethylene) oxide comb polymer as the dispersant, nonionic acrylic latex as the binder phase and hydroxypropyl methylcellulose as the wetting agent. Concentrated suspensions were cast onto a silicone-coated mylar film, and the effect of acrylic latex on deposition was investigated. Thermal analyses were performed to investigate the mass loss of the green tapes as a function of calcination temperature. Differential scanning calorimetric analyses were made under air and nitrogen atmospheres to investigate the binder distribution through the green tapes. Results showed that it is possible to prepare flexible, crack free PMN thick films using a proper slurry composition in the presence of acrylic latex binder, without using any plasticizer. Additionally, decomposing mechanisms of the acrylic based binder were essentially different in the two atmospheres.