Evolution of the Jahn-Teller distortion of MnO6 octahedra in RMnO3 perovskites (R = Pr,Nd, Dy,Tb, Ho,Er, Y): a neutron diffraction study

Stoichiometric RMnO3 perovskites have been prepared in the widest range of R3+ ionic sizes, from PrMnO3 to ErMnO3. Soft-chemistry procedures have been employed; inert-atmosphere annealings were required to synthesize the materials with more basic R cations (R = Pr, Nd), in order to minimize the unwanted presence of Mn4+. On the contrary, annealings in O2 flow were necessary to stabilize the perovskite phases for the last terms of the series, HoMnO3, ErMnO3, and YMnO3, thus avoiding or minimizing the formation of competitive hexagonal phases with the same stoichiometry. The samples have been investigated at room temperature by high-resolution neutron powder diffraction to follow the evolution of the crystal structures along the series. The results are compared with reported data for LaMnO3. The distortion of the orthorhombic perovskite (space group Pbnm), characterized by the tilting angle of the MnO6 octahedra, progressively increases from Pr to Er due to simple steric factors. Additionally, all of the perovskites show a distortion of the MnO6 octahedra due to the orbital ordering characteristic of the Jahn-Teller effect of Mn3+ cations. The degree of orbital ordering slightly increases from La to Tb and then remains almost unchanged for the last terms of the series. The stability of the crystal structure is also discussed in light of bond-valence arguments.     

Evolution of the crystal and magnetic structure of the R2MnRuO7 (R = Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y) family of pyrochlore oxides

The members of the family of pyrochlore oxides with the formula R(2)MnRuO(7) (R = Tb, Dy, Ho, Er, Tm, Yb, Lu and Y) have been synthesized and characterized. Polycrystalline samples were prepared by a soft chemistry procedure involving citrates of the different metal ions, followed by thermal treatments in air or O(2) pressure. The crystallographic and magnetic structures have been analysed from X-ray diffraction (XRD) and neutron powder diffraction (NPD) data, in complement with magnetic measurements; the evolution along the series of the crystallographic parameters (unit-cell parameters, bond distances and angles) is discussed. In R(2)MnRuO(7) pyrochlores, Mn and Ru ions statistically occupy the 16c sites in a cubic unit cell with space group Fd ?3m, which defines an intrinsic frustrated three-dimensional system. In all the cases, the low-temperature NPD data unveils an antiferromagnetic coupling of two subsets of Mn(4+)/Ru(4+) spins, indicating that the magnetic frustration is partially relieved by the random distribution of Mn and Ru over the 16c sites. At lower temperatures there is a polarization of the R(3+) magnetic moments, which also participate in the magnetic structure, when a magnetic rare earth is present.     

Double dimethylammonium sulphates of Tb,Dy, Ho,Er, Tm,Yb, Lu and Y

Double sulphates of rare earths with dimethylammonium, with empirical formula (CH₃)₂NH₂Ln(SO₄)₂·4H₂O (Ln=Tb, Dy, Ho, Er, Tm, Yb, Lu and Y), were studied by means of thermogravimetry, derivative thermogravimetry and differential thermal analysis from 20 to 700°. Quantitative gravimetric analysis was used for the determination of rare earths and sulphate. The mechanism of thermal decomposition is also suggested.

---

Zusammenfassung Doppelsulfate der seltenen Erden mit Dimethylammoniumionen der empirischen Formel (CH₃)₂NH₂Ln(SO₄)₂·4H₂O (Ln=Tb, Dy, Ho, Er, Tm, Yb, Lu und Y) wurden mittels TG, DTG und DTA im Temperaturbereich von 20–700° untersucht. Die Seltenen Erden und Sulfat wurden gravimetrisch bestimmt. Ein Mechanismus der thermischen Zersetzung wird vorgeschlagen.

---

, 20–700° (₃)₂N₂Ln(S₄)₂·4₂, Ln=Tb, Dy, , Er, Tm, Yb, Lu Y. . .

     

KCl-NaCl(1:1mol)-RECl3熔体的电导率(RE=La、Ce、Pr、Nd、Sm、Eu、Gd、Tb、Dy、Ho、Er、Tm、Yb、Lu、Y、Ce族、Y族)

用交流电桥法测定了熔融KCl-NaCl(1:1摩尔)-RECl₃的电导。比电导的温度函数表达式如下: κ=A+B(t-700) κ:比电导(Ω^-1·cm^-1);t:温度(700—850℃); A、B:本文给出的常数。讨沦了实验值与计算值的偏差,当稀土氯化物在熔体中的浓度为10—50重量百分数时可能形成了络合物。     

Reduction specifics of rare-earth orthovanadates (REE = La,Nd, Sm,Dy, Ho,Er, Tm,Yb, and Lu)

The reduction specifics of REE orthovanadates LnVO₄ (Ln = La, Nd, Sm, Dy, Ho, Er, Tm, Yb, and Lu) have been studied using the temperature-programmed reduction (TPR) method. Hydrogen and carbon monoxide were chosen as reducing agents. The reduction temperature is found to depend both on the REE and the reducing agent. REE orthovanadates are reduced in the range 1033–1153 K not forming phases that contain vanadium in intermediate oxidation states. In CO, the reduction temperature is found to be higher than in H₂ for all orthovanadates. TPR data have been used to calculate the activation energies of reduction of REE orthovanadates using the Kissinger equation. The effective activation energies of reduction depend on the REE and the reducing agent and are in the range 41–147 kJ/mol.     

Syntheses, thermal stability, and structure determination of the novel isostructural RBa3B9O18 (R = Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb)

A novel borate compound YBa(3)B(9)O(18) has crystallized in a melt of BaYB(9)O(16). Single-crystal X-ray diffraction measurements reveal that YBa(3)B(9)O(18) adopts a hexagonal space group P6(3)/m with cell parameters of a = 7.1761(6) A and c = 16.9657(6) A. The structure is made up of the planar B(3)O(6) groups parallel to each other along the (001) direction, regular YO(6) octahedra, and irregular BaO(6) and BaO(9) polyhedra to form an analogue structure of beta-BaB(2)O(4). A series of isostructural borate compounds RBa(3)B(9)O(18) (R = Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb) were prepared by powder solid-state reactions. The DTA and TGA curves of YBaB(9)O(16) show an obvious weight loss at about 955 degrees C associated with a decomposition into YBO(3), B(2)O(3), and YBa(3)B(9)O(18) due to its incongruent melting behavior. The DTA and TGA curves of YBa(3)B(9)O(18) show that it is chemically stable and a congruent melting compound. A comparison of the structures of YBa(3)B(9)O(18) and beta-BaB(2)O(4) is presented.     

Syntheses, structure, some band gaps, and electronic structures of CsLnZnTe3 (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Y)

Eleven new quaternary rare-earth tellurides, CsLnZnTe3 (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, and Y), were prepared from solid-state reactions at 1123 K. These isostructural materials crystallize in the layered KZrCuS3 structure type in the orthorhombic space group Cmcm. The structure is composed of LnTe6 octahedra and ZnTe4 tetrahedra that share edges to form [LnZnTe3] layers. These layers stack perpendicular to [010] and are separated by layers of face- and edge-sharing CsTe8 bicapped trigonal prisms. There are no Te-Te bonds in the structure of these CsLnZnTe3 compounds so the formal oxidation states of Cs/Ln/Zn/Te are 1+/3+/2+/2-. Optical band gaps of 2.13 eV for CsGdZnTe3 and 2.12 eV for CsTbZnTe3 were deduced from single-crystal optical absorption measurements. A first-principles calculation of the density of states and the frequency-dependent optical properties was performed on CsGdZnTe3. The calculated band gap of 2.1 eV is in good agreement with the experimental value. A quadratic fit for the lanthanide contraction of the Ln-Te distance is superior to a linear one if the closed-shell atom is included.     

Crystal structure of novel R3Fe(Co,Ni)0.5SnS7 (R = Y,La, Ce,Pr, Nd,Sm, Gd,Tb, Dy and Ho) compounds

Structural Chemistry - The crystal structures of quaternary R3Fe0.5SnS7, R3Co0.5SnS7 and R3Ni0.5SnS7 (R = Y, La, Ce, Pr, Nd, Sm, Gd, Tb, Dy and Ho) compounds of La3Mn0.5SiS7 structure type (space...     

Preparation and properties of the MIIIU2O7.5 polyuranates (MIII = Y,Tb, Dy,Ho, Er,Tm, Yb,or Lu)

The novel compounds of the M^IIIU₂O_7.5 type (with M^III being yttrium or lanthanides from terbium to lutetium) have been prepared via hydrothermal synthesis from hydrated uranium(VI) oxide and aqueous solutions of M(III) nitrates at 200°C. Composition and structure of the products have been studied by means of elemental analysis, high-temperature X-ray diffraction, and IR spectroscopy; the products thermal stability has been estimated.     

New Materials Derived from Ybco: CrSr2RECu2O8 (RE = La, Pr, Nd, Eu, Gd, Tb, Dy, Y, Ho, Er, Lu)

Eleven new oxides, derived from yttrium barium copper oxide by replacing the square-planar copper [Cu-O4] of the basal plane of the triple perovskite-based structure with octahedral Cr(IV), have been prepared at high pressure and temperature. Their crystal structures have been determined, and their complex microstructure has been established by means of high-resolution electron microscopy and electron diffraction. The materials have a general formula of CrSr2RECu2O8 (RE = La, Pr, Nd, Eu, Gd, Tb, Dy, Y, Ho, Er, and Lu); they are tetragonal, show the symmetry of space group P4/mmm, and do not appear to be superconducting.     

Coordination polyhedra LnOn (Ln = Er, Tm, Yb, Lu) in crystal structures

The Voronoi-Dirichlet polyhedra (VDP) and the method of intersecting spheres were used to analyze crystal structures of 728 compounds containing 976 crystallographically non-equivalent sorts of LnO_n polyhedra (Ln = Er, Tm, Yb, Lu). The Ln C.N. vary from 3 to 10, and 14 sorts of coordination polyhedra are present in the structures. Despite the great diversity of C.N., the volume of the VDP was found to depend only on the nature of the Ln atom and its valence state.     

Preparation and structural study from neutron diffraction data of R2MoO6 (R=Dy, Ho, Er, Tm, Yb, Y)

The title compounds have been prepared as polycrystalline powders by thermal treatments of stoichiometric mixtures of R₂O₃ and MoO₃ in air. The room-temperature crystal structure for all the series has been refined from high-resolution neutron powder diffraction data. All the phases are isostructural (space group C2/c, Z=8) with the polymorph α-R₂MoO₆, typified by Sm₂MoO₆. The structure contains four zigzag, one-dimensional MoO₅ polyhedral rows per unit cell, running through the RO₈ polyhedral framework along the [001] direction. MoO₅ form discrete units (i.e. do not share common oxygen), with Mo-O distances ranging from 1.77 to 2.24 Å, although the oxygen coordination can be extended to distances of about 3.1 Å, giving rise to strongly distorted MoO₈ scalenohedra. Thus, MoO₈ and RO₈ polyhedra are fully ordered in R₂MoO₆ compounds, which in fact can be considered as superstructures of fluorite (M₃O₆), containing 24 MO₂ fluorite units per unit cell, with unit-cell parameters related to that of cubic fluorite ( Å). A bond valence study demonstrates that the present crystal structure is especially stable for small rare-earth cations, and becomes more unstable when the R³⁺ size increases, thus explaining the observed preference of the large rare-earth molybdates for polymorphs β and γ with the same stoichiometry.     

Syntheses and crystal structures of anhydrous Ln(hfac)3(monoglyme). Ln = La, Ce, Pr, Sm, Eu, Gd, Tb, Dy, Er, Tm

The crystal structures of a broad series of anhydrous Ln(hfac)(3)(monoglyme) complexes, prepared in moderate to high yield, are presented: hfac = 1,1,1,5,5,5-hexafluoroacetylacetonato-; Ln = La, Ce, Pr, Sm, Eu, Gd, Tb, Dy, Er, Tm. This study contradicts the general assumption that monoglyme is too small a polyether to act as a partitioning agent displacing coordinated water on the larger lanthanide(III) ions. The structures of an intermediate La(hfac)(3)(monoglyme)(2) species and the hydrated Ce(hfac)(3)(monoglyme)(H(2)O) species are also included. The crystallographic evidence presented herein is supplemented by other characterization techniques (melting point, IR, etc.) and trends are delineated.     

Facile Synthesis of Lanthanide (Ce,Eu, Tb,Ce/Tb,Yb/Er,Yb/Ho,and Yb/Tm)‐Doped LnF3 and LnOF Porous Sub‐Microspheres with Multicolor Emissions

Monodisperse YF₃ and YOF porous sub‐microspheres were synthesized by using a novel sacrificing template method with amorphous Y(OH)CO₃ ⋅ x H₂O as the precursors and the template. It was found that the size and shape were well maintained, and the condensed precursor was transformed into uniform porous structures after fluoridation. By fine‐tuning the feed of the fluorine source, the final product could be converted from YF₃ to YOF. A possible growth mechanism is proposed for the uniform porous YF₃ structure and the porous yolk–shell‐like YOF structure. The luminescence properties showed that the as‐synthesized YF₃:Ln³⁺ (Ln=Eu, Tb, Ce, Ce/Tb, Yb/Er, Yb/Ho, and Yb/Tm) products exhibited strong multicolor emissions, which included down‐/upconversion and energy‐transfer processes. Additionally, YOX (X=Cl and Br) could be obtained if a different halogen source was used during calcination. However, the spheres were almost completely destroyed. Our novel synthetic route can also be extended to other lanthanide fluorides (REF₃, RE=Gd, Lu), which may open a facile way to fabricate novel porous nanostructures.     

Magnetic Properties of LnMnO3 (Ln=Ho, Er, Tm, Yb, and Lu)

Magnetic data are presented for LnMnO₃ (Ln=Ho, Er, Tm, Yb, and Lu) having the hexagonal crystal structure of P6₃cm. DC magnetization measurements show that magnetic order is not clearly observed for Ln=Ho-Yb, while an antiferromagnetic transition of the Mn³⁺ moments is found at ∼90 K for LuMnO₃, where the Lu³⁺ ion has no 4f localized moment. This is ascribed to both the paramagnetism of Ln³⁺ and the suppression of magnetization in the Mn³⁺ sublattices arising from strong antiferromagnetic interactions between Mn³⁺. Deviation from the Curie-Weiss law at low temperatures indicates the onset of antiferromagnetism. Some magnetization data of Ca-substituted compounds, Ln_0.5Ca_0.5MnO₃, which have the different crystal structure of orthorhombic Pnma, are also discussed briefly.     

Facile synthesis and multicolor luminescent properties of uniform Lu2O3:Ln (Ln=Eu3+, Tb3+, Yb3+/Er3+, Yb3+/Tm3+, and Yb3+/Ho3+) nanospheres

Multicolor Lu(2)O(3):Ln (Ln=Eu(3+), Tb(3+), Yb(3+)/Er(3+), Yb(3+)/Tm(3+), and Yb(3+)/Ho(3+)) nanocrystals (NCs) with uniform spherical morphology were prepared through a facile urea-assisted homogeneous precipitation method followed by a subsequent calcination process. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectrum (EDS), Fourier transformed infrared (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), and photoluminescence (PL) spectra as well as kinetic decays were employed to characterize these samples. The XRD results reveal that the as-prepared nanospheres can be well indexed to cubic Lu(2)O(3) phase with high purity. The SEM images show the obtained Lu(2)O(3):Ln samples consist of regular nanospheres with the mean diameter of 95 nm. And the possible formation mechanism is also proposed. Upon ultraviolet (UV) excitation, Lu(2)O(3):Ln (Ln=Eu(3+) and Tb(3+)) NCs exhibit bright red (Eu(3+), (5)D(0)→(7)F(2)), and green (Tb(3+), (5)D(4)→(7)F(5)) down-conversion (DC) emissions. Under 980 nm NIR irradiation, Lu(2)O(3):Ln (Ln=Yb(3+)/Er(3+), Yb(3+)/Tm(3+), and Yb(3+)/Ho(3+)) NCs display the typical up-conversion (UC) emissions of green (Er(3+), (4)S(3/2),(2)H(11/2)→(4)I(15/2)), blue (Tm(3+), (1)G(4)→(3)H(6)) and yellow-green (Ho(3+), (5)F(4), (5)S(2)→(5)I(8)), respectively.