Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

Reactions of 1-nitrocyclohexene with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-binucleophiles

A modification of 1-nitrocyclohexene synthesis is proposed; its reaction with phenylhydrazine and benzoic acid hydrazide is shown to afford monoadducts, and with hydrazine hydrate, bisaduct. With diphenylguanidine occurs heterocyclization to 1-phenyl-2-N-phenylamino-4,5,6,7-tetrahydrobenzimidazole, whose structure is confirmed by the X-ray diffraction data. The analysis performed for this compound of the electron density distribution function in the crystal made it possible to estimate the charge distribution, π-electrons delocalization nature, and the role of N-H…N, C-H…H-C and C-H…C interactions in the formation of the crystal packing.     

DFT-calculated structure of protonated tetraphenyl <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-butylcalix[4]arene tetraketone

Using DFT calculations, two of the most probable structures (A, B) of the tetraphenyl p-tert-butylcalix[4]arene tetraketone·H₃O⁺ cationic complex species were derived. The hydroxonium ion H₃O⁺, placed in the coordination cavity formed by the calix[4]arene lower-rim groups, is bound by strong hydrogen bonds to the phenoxy oxygen atoms of the calix[4]arene ligand (structures A, B) and also to one carbonyl oxygen (structure B). Correspondence: Emanuel Makrlík, Faculty of Applied Sciences, University of West Bohemia, Pilsen, Czech Republic.     

Equilibrium Compositions of HF Solutions in <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethylformamide

For HF solutions in DMF, concentration-dependent fractions of DMF molecules (α(DMF)) that remain unassociated and that enter heteroassociates (HAs) of 1 : 1, 4 : 1, and 12 : 1 molecular stoichiometries were obtained by two independent methods, namely, from an analysis of IR spectra and by calculating the material balance. The experimental way was shown to be enough exact in determining the ratio between the solvent molecules in four different states up to ~83 mol % HF. The equilibrium compositions of HF–DMF solutions were estimated over the entire range of concentrations. Starting with [HF] of ~25 mol %, more than one-half HF molecules are associated, and at [HF] of ~50–92 mol %, at least 90% of the HF molecules are associated. The equilibrium composition of HF–organic solvent (Solv) solutions in which HAs of 1 : 1, 1 : 4, and 1 : 12 molecular stoichiometries are formed, can be described by a single set of α(HF–Solv) versus concentration plots.     

Synthesis of amino acid conjugates of glycyrrhizic acid using <Emphasis Type="Italic">N</Emphasis>-hydroxyphthalimide and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>'-dicyclohexylcarbodiimide

Synthesis of amino acid conjugates of glycyrrhizic acid with the use of N-hydroxyphthalimide, N,N'-dicyclohexylcarbodiimide, and tert-butyl esters of L-amino acids (valine, isoleucine, phenylalanine, and methionine) was performed followed by deprotection with trifluoroacetic acid. The target amino acid conjugates were isolated by column chromatography on silica gel in 40–45% yield. The structure of the prepared compounds was confirmed by IR and ¹³C NMR spectroscopy.     

Reactions of <Emphasis Type="Italic">N</Emphasis>-Allyl- and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Diallyltrifluoromethanesulfonamides with Carboxylic Acid Amides under Oxidizing Conditions

Reactions of acetamide and benzamide with N-allyltrifluoromethanesulfonamide in the presence of t-BuOCl–NaI afforded exclusively 2,5-bis(chloromethyl)-1,4-bis(trifluoromethanesulfonyl)piperazine. Analogous reaction with N,N-diallyltrifluoromethanesulfonamide gave mixed halogenation product at only one C=C double bond of the substrate.     

Conformations and properties of <Emphasis Type="Italic">O</Emphasis>-Alkyl-<Emphasis Type="Italic">S</Emphasis>-(2-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dialkylamino)-ethylmethylthiophosphonates

Conformers of the biologically active compounds CH₃P(O)(OR)(SCH₂CH₂NR ₂ ^′ ), where (I) R = i-C₄H₉, R′ = C₂H₅ and (II) R = C₂H₅, R′ = i-C₃H₇, are calculated within the AM1 level of theory. The elongated and twisted forms with maximum and minimum distances between a nitrogen atom and those of a phosphorus tetrahedron, respectively, and bearing a syn and anti oriented alkoxy group relative to a phosphoryl oxygen, are studied. It is found that the differences between the energy, electronic, and geometric parameters of these forms are apparent in differences between their properties, e.g., the ability to participate in complexation and protonation, reactions that to some extent simulate the interaction between a substance and a biological object.     

Thiocyanation of <Emphasis Type="Italic">N</Emphasis>-arylsulfonyl-, <Emphasis Type="Italic">N</Emphasis>-aroyl-, and <Emphasis Type="Italic">N</Emphasis>-[(<Emphasis Type="Italic">N</Emphasis>-arylsulfonyl)benzimidoyl]-1,4-benzoquinone imines

Reactions of thiocyanate ion with N-aroyl-, N-arylsulfonyl-, and N-(N-arylsulfonylbenzimidoyl)-1,4-benzoquinone imines follow the 1,4-addition pattern, and the adducts undergo intramolecular cyclization to give the corresponding N-substituted 5-amino-1,3-benzoxathiol-2-ones as final products.     

Viscosities and Surface Tensions of Phenetole with <Emphasis Type="Italic">N</Emphasis>-Methyl-2-pyrrolidone, <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethylformamide and Tetrahydrofuran Binary Systems at Three Temperatures

Viscosities, η, and surface tensions, σ, of binary systems of phenetole (ethoxy benzene or ethyl phenyl ether) with N-methyl-2-pyrrolidone, N,N-dimethylformamide or with tetrahydrofuran were measured over the entire mole fraction range and at (298, 303 and 308) K. The experimental data was used to compute the deviations in viscosity, Δη, and surface tension, Δσ. Values of the excess Gibbs energy of activation G*^E, surface entropy S _σ and surface enthalpy H _σ were calculated. Viscosity data of the binary systems were calculated using the Grunberg and Nissan and the three-body and four-body McAllister correlations. The Redlich–Kister method was used for evaluation of coefficients and standard deviations for Δη, Δσ and G*^E. The results were interpreted in terms of the probable effect of molecular interactions between components as well as polarity.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

Synthesis and structure of Pt(II) acetamidate complexes containing <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethyl-substituted ethylenediamine and trimethylenediamine

Reactions of acetamide with platinum(II) diamines [Pt(N,N-DimeEn)Cl₂], [Pt(Tm)Cl₂], and [Pt(N,N-DimeTm)Cl₂] (N,N-DimeEn = (CH₃)₂N(CH₂)₂NH₂, Tm = NH₂(CH₂)₃NH₂, N,N-DimeTm = (CH₃)₂N(CH₂)₃NH₂) with preliminary precipitation of chlorine ions by silver salts gave binuclear Pt(II) acetamidates [Pt₂(CH₃)₂N(CH₂)₂NH₂)₂(μ-NHCOCH₃)₂](NO₃)₂ · H₂O (I), [Pt₂(NH₂(CH₂)₃NH₂)₂)(μ-NHCOCH₃)₂](NO₃)₂ · H₂O (II), and [Pt₂(CH₃)₂N(CH₂)₃NH₂)₂(μ-NHCOCH₃)₂](HSO₄)₂ (III), whose crystal structures were determined. Crystals of I are monoclinic: a = 14.459(2) Å, b = 17.197(3) Å, c = 9.822(2) Å, β = 105.923(10)°, V = 3348.6(8) ų, space group P2(1)/c, Z = 4, R _hkl = 0.0419 for 6663 reflections. Complex I is a binuclear acetamidate with bridging (NHCOCH₃)^? ligands, one of which is bound to two Pt atoms through the N and O atoms, and the other ligand is bound only through the N atom. The Pt-Pt distance is 2.987(1) Å. Crystals of II are monoclinic: a = 10.213(7) Å, b = 13.373(9) Å, c = 16.533(11) Å, β = 97.971(9)°, V = 2236(3) ų, space group P2(1)/n, Z = 4, R _hkl = 0.557 for 6462 reflections. The Pt-Pt distance is 3.057(1) Å. Crystals of III are monoclinic: a = 10.557(12) Å, b = 18.531(2) Å, c = 14.4744(17) Å, β = 108.705(2)°, V = 2682(5) ų, space group P2(1)/n, Z = 4, R _hkl = 0.569 for 8506 reflections. The Pt-Pt distance is 3.202(1) Å. Complexes II and III are binuclear acetamidates, in which two chelating Pt(Tm) or Pt(N,N-DimeTm) moieties are coordinated through the N and O atoms of (NHCOCH₃)^? cis-bridges.     

<Emphasis Type="Italic">N</Emphasis>-halohexamethyldisilazanes

The review is devoted to N-halohexamethyldisilazanes, perspective but scantily studied halogenating agents. Methods of preparation, physiochemical characteristics, and synthetic potential are considered. Mechanisms of a number of reactions are presented.     

Determination of epoxides by high-performance liquid chromatography following derivatization with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethyldithiocarbamate

A reversed-phase, high-performance liquid chromatography (RP-HPLC) method that allows quantitation of low levels of epoxides has been described. The method involved derivatization of epoxides using 100- to 1,000-fold excess N,N-diethyldithiocarbamate (DTC) at 60 °C for 20 min at neutral pH. The unreacted DTC was then decomposed to CS₂ and diethyl amine by acidification of the reaction mixture to pH 2 using orthophosphoric acid. The first two steps could be performed in the same reaction vessel by sequential addition of reagents. In the final step, an aliquot (20 μL) of the derivatized sample was analyzed for the presence of stable esters of DTC by RP-HPLC using a Supelcosil LC-18-S (150 × 4.6-mm) column and a mobile phase consisting of 40% (v/v) acetonitrile in water at a flow of 1 mL min⁻¹. Using UV detection at 278 nm, the epoxides gave linear responses in the concentration range of 0.25 to 50 μM. The method is robust, and as low as 5 pmol of the analyte could be successfully detected and quantified with recoveries of ≥94%. Following a minimal pretreatment such as ultrafiltration (molecular weight cutoff 5,000 Da), the method is suitable for analysis of epoxides in complex physiological fluids (e.g., fetal bovine serum). The method has been rigorously evaluated and adapted in our laboratory for routine analysis and determination of stability of epoxides of 1,3-butadiene and other alkenes added to cell cultures.     

Kinetics of the reaction of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylaniline with 1-bromoalk-2-ynes

Quaternization of N,N-dimethylaniline with propargyl bromide, 1-bromobut-2-yne, and 1-bromooct-2-yne were studied. It was shown that, with the lengthening chain of the substituent at the triple bond, the quaternization rate tends to increase.     

Influence of octadecylammonium, <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylhexadecylammonium,and 1-hexadecyltrimethylammonium chloride upon the fractionated montmorillonite

The thermal degradation of thermally cured vinyl ester resin systems is studied for different heating rates. The kinetic triplets, the activation energy, pre-exponential factor and the reaction model f(α) for the different reaction extent of conversions (α) are estimated using advanced isoconversional methods. Although the thermal degradation curves show the degradation occurs as a single stage, the kinetic parameters suggest the otherwise. The activation energy remains constant for α?=?0.3–0.575 but varies during the initial and final stages of conversion. Similarly, the pre-exponential factor shows considerable variation between the lower and higher reaction extent (α) values. This shows the complexity in the reaction. The probable reaction mechanism that the degradation follows has been explained. The complexity of the thermal degradation and the changes in reaction model f(α) over different reaction extent has been related. The appropriate working temperature for different thermal lifetime of the cured vinyl ester resin system for the failure of conversion α?=?0.2 has been predicted under the nitrogen atmosphere.     

Synthesis and structure of silicon-containing <Emphasis Type="Italic">N</Emphasis>-methyland <Emphasis Type="Italic">N</Emphasis>-benzoylamides of diisopropylphosphoric acid

Diisopropyl N-benzoyl-N-(trimethylsilyl)phosphoramidate reacts with ClCH₂SiMe₂Cl under mild conditions to form diisopropyl N-benzoyl-N-[(chlorodimethylsilyl)methyl]phosphoramidate (III). Diisopropyl N-methyl-N-(trimethylsilyl)phosphoramidate with ClCH₂SiMe₂Cl affords an N-transsilylation product which does not rearrange into diisopropyl N-[(chlorodimethylsilyl)methyl]-N-methylphosphoramidate (XV) even under severe conditions (4 h, 130°C). Compound XV was prepared by the reaction of diisopropyl phosphorochloridate with N-[(methoxydimethylsilyl)methyl]-N-methylamine followed by treatment of diisopropyl N-[(methoxydimethylsilyl)methyl]-N-methylphosphoramidate with boron trichloride. Analysis of experimental and calculated ²⁹Si chemical shifts points to a five-coordinate silicon atom in compound III and a fourcoordinate silicon atom in compound XV. According to B3LYP calculations with due regard to solvent effects, compound III is an isomer with a C=O→Si bond. By variation of substituents at silicon, phosphorus, and carbonyl carbon atoms, chelate structures with either C=O→Si or P=O→Si dative bonds can be obtained.