层状多硫代锑(Ⅲ)酸镉(Ⅱ)化合物(1,4-DABH2)Cd2Sb2S6的溶剂热合成与表征

利用溶剂热方法合成了层状多硫代锑(Ⅲ)酸镉(Ⅱ)化合物(1,4-DABH₂)Cd₂Sb₂S₆ (1)(1,4-DAB=1,4-丁二胺),并通过红外光谱、热重分析对其进行了表征,用X-射线衍射测定了化合物的单晶结构。单晶解析表明,化合物属正交晶系,Cmca空间群,M_r=750.77,a=0.860 3(5) nm,b=0.898 7(6) nm,c=2.273(2) nm,V=1.758(2) nm³,Z=4,λ=0.071 073 nm,R=0.032,wR=0.106 7。晶体结构中含有六元环的Cd₂SbS₃和八元环的Cd₂Sb₂S₄的阴离子网络层状[CdSbS₃]_n^n-,双质子化的有机阳离子在阴离子层之间以氢键N-H…S形式连接。另外紫外-可见漫反射光谱研究表明,化合物为半导体。     

层状多硫代锑(Ⅲ)酸镉(Ⅱ)化合物(1,4-DABH2)Cd2Sb2S6的溶剂热合成与表征

利用溶剂热方法合成了层状多硫代锑髥酸镉髤化合物(1,4-DABH2)Cd2Sb2S6(1)(1,4-DAB=1,4-丁二胺),并通过红外光谱、热重分析对其进行了表征,用X-射线衍射测定了化合物的单晶结构。单晶解析表明,化合物属正交晶系,Cmca空间群,Mr=750.77,a=0.860 3(5)nm,b=0.898 7(6)nm,c=2.273(2)nm,V=1.758(2)nm3,Z=4,λ=0.071 073 nm,R=0.032,wR=0.106 7。晶体结构中含有六元环的Cd2SbS3和八元环的Cd2Sb2S4的阴离子网络层状[CdSbS3]nn-,双质子化的有机阳离子在阴离子层之间以氢键N-H…S形式连接。另外紫外-可见漫反射光谱研究表明,化合物为半导体。     

无机-有机杂化硫属化合物[Mn(1,2-dap)2(H2O)]2(μ-Sn2Q6)(Q=S、Se)和[Mn(tren)]2(μ-Sn2S6)的合成、晶体 结构与性能

采用溶剂热方法合成了3个多元硫属化合物[Mn(1,2-dap)2(H2O)]2(μ-Sn2Q6)(Q=S(1)和Se(2))和[Mn(tren)]2(μ-Sn2S6)(3),用X-射线单晶衍射测定了化合物的结构,并通过红外光谱、紫外-可见漫反射光谱对其进行了表征。单晶结构解析表明,化合物1和2都属于正交晶系,Pccn空间群(No.56),晶体结构是由[Mn(1,2-dap)2(H2O)]2+配合物阳离子和[Sn2Q6]4-二聚体通过Mn-Q键连接而成的[Mn(1,2-dap)2(H2O)]2(μ-Sn2Q6)低聚体,相邻的低聚体之间通过氢键相连形成三维结构。化合物3属于三斜晶系,晶体结构是由[Mn(tren)]2(μ-Sn2S6)单元通过氢键连接而成的二维结构。紫外-可见漫反射光谱结果显示化合物1,2和3的带隙分别为2.5,2.1,2.4 e V,属于半导体材料。     

有机杂化硫代碲酸盐化合物（H2en）TeS3和[Ni（en）3]TeS3的溶剂热合成与表征

用低温溶剂热法合成了2种分立结构的有机杂化硫代碲（Ⅳ）酸盐化合物（H₂en）TeS₃（1）和[Ni（en）₃]TeS₃（2）（en=乙二胺）,通过X-射线单晶衍射,红外光谱,元素分析等手段对它们的结构进行了表征。晶体结构解析结果表明：2个化合物均属单斜晶系,空间群分别为P2₁和P2₁/c。化合物1和2具有孤立三角锥[TeS₃]^2-阴离子,化合物1的平衡阳离子为双质子化乙二胺[H₂en]²⁺,阴离子基团[TeS₃]^2-和阳离子基团[H₂en]²⁺之间通过N-H…S氢键连接。化合物2的阳离子基团为过渡金属Ni与乙二胺的配合物[Ni（en）₃]²⁺。另外,对该2种晶体进行了紫外-可见漫反射光谱测试和热重分析。     

铋(Ⅲ)配合物Bi(1,10-phen)[S2CN(CH3)2]2(NO3),

Three bismuth（Ⅲ） complexes Bi（1,10-phen）[S2CN（CH3）2]2（NO3） （1）, {Bi（S2COCH3）[S2CNC6Hs（CH3）]2}2 （2） and [Bi（S2CNBu2）2（CH3OH）（NO3）]∞ （3） were synthesized and characterized by elemental analysis and IR spectra. Their crystal structures were determined by X-ray single crystal diffraction analysis. Studies show that complex 1 has a monomeric structure with the central bismuth atom eight-coordinated in a capped distorted pentagonal bipyramidal geometry. The complex 2 takes centrosymmetric dimeric structure and the bismuth atoms are seven-coordinated in distorted pentagonal bipyramidal geometry.In complex 3, the bismuth atoms are seven-coordinated in distorted pentagonal bipyramidal geometry by bridging nitrate O atoms and the resulting structure is onedimensional infinite chain polymer.     

层状MAgTeS3 (M＝K, Rb)的溶剂热合成与表征

以硫醇为螯合剂, 在溶剂热条件下合成了两种层状硫代亚碲酸盐KAgTeS₃ (1)和RbAgTeS₃ (2). X射线单晶解析表明, 1和2是类质同晶化合物. 在晶体结构中, 银硫四面体通过共用顶点形成无限的平行链, 在相邻链中银硫四面体取向相反, 这些链与链由三角锥配位的碲互相连接形成阴离子层状结构, 阳离子在阴离子层间. 1的结晶学数据为: M_r＝370.75, P2₁/c, a＝0.73639(6) nm, b＝1.06468(8) nm, c＝0.85203(6) nm, β＝106.4640(10)°, V＝0.64062(8) nm³, Z＝4, R(F)＝4.44%, wR(F²)＝11.66%. 2的结晶学数据: M_r＝417.12, P2₁/c, a＝0.75531(12) nm, b＝1.07076(7) nm, c＝0.8583(2) nm, β＝106.497(6)°, V＝0.66558(19) nm³, Z＝4, R(F)＝6.00%, wR(F²)＝15.43%. DSC及紫外-可见漫反射光谱研究表明, 这两种化合物为半导体, 并具有很好的热稳定性.     

层状MAgTeS3 (M＝K, Rb)的溶剂热合成与表征

以硫醇为螯合剂, 在溶剂热条件下合成了两种层状硫代亚碲酸盐KAgTeS₃ (1)和RbAgTeS₃ (2). X射线单晶解析表明, 1和2是类质同晶化合物. 在晶体结构中, 银硫四面体通过共用顶点形成无限的平行链, 在相邻链中银硫四面体取向相反, 这些链与链由三角锥配位的碲互相连接形成阴离子层状结构, 阳离子在阴离子层间. 1的结晶学数据为: M_r＝370.75, P2₁/c, a＝0.73639(6) nm, b＝1.06468(8) nm, c＝0.85203(6) nm, β＝106.4640(10)°, V＝0.64062(8) nm³, Z＝4, R(F)＝4.44%, wR(F²)＝11.66%. 2的结晶学数据: M_r＝417.12, P2₁/c, a＝0.75531(12) nm, b＝1.07076(7) nm, c＝0.8583(2) nm, β＝106.497(6)°, V＝0.66558(19) nm³, Z＝4, R(F)＝6.00%, wR(F²)＝15.43%. DSC及紫外-可见漫反射光谱研究表明, 这两种化合物为半导体, 并具有很好的热稳定性.     

链状[NH3CH2CH2NH3]AgAsS4的溶剂热合成及表征

利用溶剂热方法合成了链状[NH3CH2CH2NH3]AgAsS4,通过单晶X射线衍射技术对其进行了晶体结构分析,该化合物晶体属单斜晶系,空间群C2/c,晶胞参数a=1.35805(8)nm,b=0.65331(3)nm,c=2.27711(9)nm,β=106.42(3)°,Z=8.化合物具有有趣的梯子状双链结构,该阴离子链由AsS4与AgS3共用顶点交替连接而成,有机阳离子在阴离子链之间存在较强的N—H…S氢键.DSC和Tg分析结果表明化合物在200℃以下是稳定的.     

K2CdSnS4的溶剂热合成与晶体结构

利用溶剂热法合成了层状硫代锡(Ⅲ)酸镉(Ⅱ)化合物K₂CdSnS₄。单晶X-射线衍射分析结果表明,化合物属单斜晶系,C2/c空间群,a=1.1021(5)nm,b=1.1030(5)nm,c=1.5151(10)nm,α=90°,β=100.416(12)°,γ=90°,V=1.8114(17)nm³,Z=8,D_c=3.209g·cm^-3,M_r=437.60,μ=6.853mm^-1,F(000)=1600,λ=0.071073nm,R=0.1042,wR=0.2008。该化合物由类金刚烷[Cd₂Sn₂S₁₀]^8-结构单元互相连接形成层状结构。紫外-可见漫反射光谱研究表明,化合物为半导体,带隙为2.2eV。     

[C4N2H12]1.5[Zn2(PO4)(HPO4)2]·H2O晶体的合成与表征

由于在电学、磁学、光学、吸附、离子交换和催化等领域具有潜在的应用价值,具有开放骨架结构的金属磷酸盐的合成一直受到人们的广泛关注.在这些磷酸盐微孔化合物中,磷酸锌晶体是拓扑结构最为丰富的一种.     

Solvothermal Synthesis and Crystal Structure of Mn2(C5H14N2)Sb2S5: A New Member of the Mn2(L)Sb2S5 Family (L is an Organic Structure Director)

The new compound Mn₂(C₅H₁₄N₂)Sb₂S₅ (C₅H₁₄N₂ = 1,3‐diaminopentane, DAPE) was prepared under solvothermal conditions using the elements as starting materials. The compound crystallizes in the orthorhombic space group Pbca with the lattice parameters a = 12.620(3), b = 11.877(2) and c = 21.814(4) Å. The primary building units are trigonal SbS₃ pyramids and distorted MnS₆ and MnS₄N₂ octahedra. These primary building blocks are joined to form Mn₂Sb₂S₄ hetero‐cubane units which are then connected via common corners, edges and faces thus forming a second type of hetero‐cubane. The hetero‐cubanes are condensed into layers within the (001) plane. The connection mode yields ellipsoidal pores within the layers with dimensions of about 9·7.5Å. The N atoms of the structure directing amines are exclusively bound to one of the two crystallographically independent Mn²⁺ cations and they point into the pores and between the layers separating the layers from each other. The interlayer separation measures about 6.7Å. Whereas the MnS₆ octahedron shows only a moderate distortion the MnS₄N₂ octahedron is severely distorted with a remarkable long Mn‐S bond length of 2.968Å.     

Solvothermal Syntheses and Characterization of Thiostannates [M(en)3]2Sn2S6 (M = Mn,Co, Zn), the Influence of Metal Ions on the Crystal Structure

Three new thiostannates [M(en)₃]₂Sn₂S₆ (en = ethylenediamine, M = Mn( 1 ), Co( 2 ) and Zn( 3 )) were synthesized by solvothermal method. The crystals were grown up in a Teflon‐lined steel autoclave at temperature about 180 °C. All the three compounds consist of discrete [Sn₂S₆]^4— anions, which are dimer of two tetrahedral SnS₄ sharing a common edge. The transition metal cations are six‐coordinated by three ethylenediamine molecules forming octahedral complex ions. Although the synthetic procedures, the mole ratio of the reactants and the solvent are essentially the same, the compound of Mn^II is quite different in structure from that of compounds of Co^II and Zn^II. Compound 1 crystallizes in monoclinic crystal system, C2/c, whereas compounds 2 and 3 crystallize in the orthorhombic crystal system, Pbca. Unlike compound 1 , the [M(en)₃]²⁺ cations in 2 and 3 are disordered. The difference of molecular packing between 1 and 2 ‐ 3 is considered due to the influence of the entities of the metal ions, such as radii and the coordination properties. The thermal chemical behaviors of the compounds 1 ‐ 3 were discussed and the results are also related to the property of the metal ions.     

Solvothermal Synthesis and Characterization of （ NH3 CH2 CH2 NH3） HgSnS4 with a Column Structure

IntroductionSulfide-based open-framework materials are in-triguing compounds.They possess very diverse and in-teresting structures,and exhibit potential applicationsas a newgeneration of molecular sieves with the proper-ties of semiconductor materials[1].…     

Solvothermal Synthesis, Crystal Structure, and Properties of the New Oxothiomolybdate Ni(dien)2[Mo2O2S6]

Summary.  The reaction of NiCl₂ · 6H₂O, Na₂MoO₄ ċ 2H₂O, and sulfur in a mixture of diethylenetriamine and 0.2 M ammonia solution (1:4) under solvothermal conditions leads to the formation of orange-red crystals of the oxothiomolybdate Ni(dien)₂[Mo₂O₂S₆] (dien = diethylenetriamine) in nearly 100% yield. The structure consists of [Ni(dien)₂]²⁺ cations and discrete dimeric [Mo₂O₂S₆]²⁻ anions. The compound crystallizes in the monoclinic space group P2₁/c (a = 8.726(2), b = 18.111(4), c = 14.419(3) ?, β = 101.686(3)°). Upon heating the compound decomposes in a single step starting at about 250°C. The final decomposition product was identified by X-ray powder diffractometry as MoS₂ and Ni₃S₂. Spectroscopic data as well as detailed synthetic procedures for Ni(dien)₂[Mo₂O₂S₆] are reported. Received November 6, 2000. Accepted November 17, 2000     

Synthesis and Structure of the Novel Pentaselenidohexaarsenate(I,II) Cluster Anion [As6Se5]2−

Methanolothermal reaction of [MnCl₃(9‐ane‐N₃)] with As₂Se₃ at 150 °C in the presence of Cs₂CO₃ affords violet‐coloured [Mn(9‐ane‐N₃)₂]As₆Se₅ ( 1 ). Its novel tricyclic selenidoarsenate(I,II) anion [As₆Se₅]^2? contains two five‐membered [As₃As(Se)Se] rings that are symmetry‐related by a crystallographic C₂ axis passing through the common As^I‐As^I bond between their respective first two ring members. The adjacent As^I atoms in the individual rings are bridged by the Se atom of the third [As₄Se] ring.     

Two Related Porous Thioindates with T3 Clusters, (H2DAH)3In10S18·6H2O and (H2DAH)3In10S18

Two high porous thioindates with 1,6‐diaminohexane (DAH), DAH‐InS‐ 1 and DAH‐InS‐ 2 , were prepared by solvothermal reaction. Though the same T₃ supertetrahedral frameworks were reported, the cations are different. DAH is a non‐cyclic diamine and also an economical reagent for synthesis. Because of the structural difference of the structural directing agents, the dimensions of crystal cells of DAH‐InS‐ 1 and DAH‐InS‐ 2 are elongated and the total volumes for the cation and solvent are 74.6 and 72.1 % (Platon) larger relative to those reported previously. The two compounds were obtained in one reaction system by controlling the reaction time. Their structures are briefly discussed and the correlativity of crystal shape with the parameters of microstructure is discussed.     

(NH3CH2CH2NH3)B6O9(OH)2: Synthesis and crystal structure of a novel layered borate templated by ethylenediamine

A novel intercalated borate compound (NH₃CH₂CH₂NH₃)B₆O₉(OH)₂, has been solvothermally synthesized, and structurally characterized by single crystal X-ray diffraction. Compound crystallizes in the monoclinic, space group P2(1)/c, , , , β=93.32(3)°, , Z=4. Its oxoborate structure is built up from 1-D polyborate chains with 3, 11-membered boron rings bonded diamine molecules through electrostatic attraction and hydrogen bond interactions to construct 2-D layered compound. Other characterizations by IR, element analysis, thermal analysis and specific surface area are also discussed.     

Solvothermal Synthesis and Crystal Structure of the New Layered Thioantimonate(III) [Ni(C4H13N3)2]9Sb22S42 · 0.5H2O: Interconnection of the SbS3, SbS4, and SbS5 Primary Building Units Yielding the Very Large Sb30S30 Heteroring

The novel thioantimonate(III) [Ni(dien)₂]₉Sb₂₂S₄₂ · 0.5H₂O was synthesised under solvothermal conditions by reacting elemental Ni, Sb and S in an aqueous solution of diethylenetriamine (dien) (80%). The compound crystallises in the triclinic space group P1¯, a = 8.997(2) Å, b = 15.293(3) Å, c = 34.434(7) Å, α = 85.51(3)°, β = 84.16(3)°, γ = 83.54(3)°, V = 4672.7 (16) ų, Z = 1. The layered [Sb₂₂S₄₂^18—] anion in [Ni(dien)₂]₉Sb₂₂S₄₂ · 0.5H₂O is composed of nine SbS₃ trigonal pyramids, one SbS₄ and one SbS₅ unit. The interconnection of these units by sharing common S atoms yields Sb‐S heterorings of different sizes. Besides the smaller Sb₂S₂ and Sb₃S₃ rings a very large Sb₃₀S₃₀ heteroring is observed. The structure directing effect of the [Ni(dien)₂]²⁺ cations is obvious as they are located above and below the pores of the anion. The nine [Ni(dien)₂]²⁺ cations exhibit different conformations. All Ni²⁺ cations are in an octahedral environment of six N atoms of two dien ligands. The anions and cations are stacked perpendicular to [100] in an alternating fashion.