Experimental and computational studies of the phenyl radical reaction with allene

The kinetics for the gas-phase reaction of phenyl radicals with allene has been measured by cavity ring-down spectrometry (CRDS), and the mechanism and initial product branching have been elucidated with the help of quantum-chemical calculations. The absolute rate constant measured by the CRDS technique can be expressed by the following Arrhenius equation: kallene (T=301-421 K)=(4.07+/-0.38)x10(11) exp[-(1865+/-85)/T] cm3 mol(-1) s(-1). Theoretical calculations, employing high level G2M energetic and IRCMax(RCCSD(T)//B3LYP-DFT) molecular parameters, indicate that under our experimental conditions the most preferable reaction channel is the addition of phenyl radicals to the terminal carbon atoms in allene. Predicted total rate constants agree with the experimental values within 40%. Calculated total and branching rate constants are provided for high-T kinetic modeling.     

Experimental and theoretical studies of the phenyl radical reaction with propene

The kinetics for the reaction of C6H5 with propene has been measured by cavity ring-down spectrometry (CRDS) at temperatures 296-496 K under an Ar pressure of 40 Torr. The total rate constant can be given by the following Arrhenius expression (in units of cm3 mol(-1) s(-1)): k(C6H5 + C3H6) = 10(11.93+/-0.06) exp[-(1512 +/- 51)/T]. Density functional and higher level of theory calculations (up to the G2M level) have been carried out to provide additional insights about the mechanism of this reaction, and we also performed transition state theory (TST) calculation for the rate constant prediction. Our theoretical kinetic calculations predict that the C6H5 addition to the terminal =CH2 site in propene is dominant at the temperature range of our CRDS measurements. However, the H-abstraction channel forming benzene and the allyl radical becomes increasingly important at higher temperatures. The total high-pressure limiting rate constant calculated on the basis of the G2M reaction barriers is in reasonable agreement with the experimental values.     

Ab initio chemical kinetics for the OH+HNCN reaction

The kinetics and mechanism of the reaction of the cyanomidyl radical (HNCN) with the hydroxyl radical (OH) have been investigated by ab initio calculations with rate constants prediction. The single and triplet potential energy surfaces of this reaction have been calculated by single-point calculations at the CCSD(T)/6-311+G(3df,2p) level based on geometries optimized at the B3LYP/6-311+G(3df,2p) and CCSD/6-311++G(d,p) levels. The rate constants for various product channels in the temperature range of 300-3000 K are predicted by variational transition-state and Rice-Ramsperger-Kassel-Marcus (RRKM) theories. The predicted total rate constants can be represented by the expressions ktotal=2.66 x 10(+2)xT-4.50 exp(-239/T) in which T=300-1000 K and 1.38x10(-20)xT2.78 exp(1578/T) cm3 molecule(-1) s(-1) where T=1000-3000 K. The branching ratios of primary channels are predicted: k1 for forming singlet HON(H)CN accounts for 0.32-0.28, and k4 for forming singlet HONCNH accounts for 0.68-0.17 in the temperature range of 300-800 K. k2+k7 for producing H2O+NCN accounts for 0.55-0.99 in the high-temperature range of 800-3000 K. The branching ratios of k3 for producing HCN+HNO, k6 for producing H2N+NCO, k8 for forming 3HN(OH)CN, k9 for producing CNOH+3NH, and k5+k10 for producing NH2+NCO are negligible. The rate constants for key individual product channels are provided in a table for different temperature and pressure conditions.     

Reaction of hydrogen atoms with propyne at high temperatures: an experimental and theoretical study

The kinetics of the reaction of hydrogen atoms with propyne (pC3H4) was experimentally studied in a shock tube at temperatures ranging from 1200 to 1400 K and pressures between 1.3 and 4.0 bar with Ar as the bath gas. The hydrogen atoms (initial mole fraction 0.5-2.0 ppm) were produced by pyrolysis of C2H5I and monitored by atomic resonance absorption spectrometry under pseudo-first-order conditions with respect to propyne (initial mole fraction 5-20 ppm). From the hydrogen atom time profiles, overall rate coefficients k(ov) identical with -([pC3H4][H])(-1) x d[H]/dt for the reaction H + pC3H4 --> products ( not equal H) were deduced; the following temperature dependence was obtained: kov = 1.2 x 10(-10) exp(-2270 K/T) cm(3) s(-1) with an estimated uncertainty of +/-20%. A pressure dependence was not observed. The results are analyzed in terms of statistical rate theory with molecular and transition state data from quantum chemical calculations. Geometries were optimized using density functional theory at the B3LYP/6-31G(d) level, and single-point energies were computed at the QCISD(T)/cc-pVTZ level of theory. It is confirmed that the reaction proceeds via an addition-elimination mechanism to yield C2H2 + CH3 and via a parallel direct abstraction to give C3H3 + H2. Furthermore, it is shown that a hydrogen atom catalyzed isomerization channel to allene (aC3H4), H + pC3H4 --> aC3H4 + H, is also important. Kinetic parameters to describe the channel branching of these reactions are deduced.     

Kinetics and mechanism of the C6H5 + CH3CHO reaction: experimental measurement and theoretical prediction of the reactivity toward four molecular sites.

The kinetics and mechanism of the reaction of C6H5 with CH3CHO have been investigated experimentally and theoretically. The total rate constant for the reaction has been measured by means of the cavity ring-down spectrometry (CRDS) in the temperature range 299-501 K at pressures covering 20-75 Torr. The overall bimolecular rate constant can be represented by the expression k = (2.8 +/- 0.2) x 10(11) exp[-(700 +/- 30)/T] cm3 mol-1 s-1, which is slightly faster than for the analogous C6H5 + CH2O reaction determined with the same method in the same temperature range. The reaction mechanism for the C6H5 + CH3CHO reaction was also explored with quantum-chemical calculations at various hybrid density functional theories (DFTs) and using ab initio high-level composite methods. The theories predict that the reaction may occur by two hydrogen-abstraction and two addition channels with the aldehydic hydrogen-abstraction reaction being dominant. The rate constant calculated by the transition state theory for the aldehydic hydrogen-abstraction reaction is in good agreement with the experimental result after a very small adjustment of the predicted reaction barrier (+0.3 kcal mol-1). Contributions from other product channels are negligible under our experimental conditions. For combustion applications, we have calculated the rate constants for key product channels in the temperature range of 298-2500 K under atmospheric-pressure conditions; they can be represented by the following expressions in units of cm 3mol-1 s-1: k1,cho = 8.8 x 10(3)T2.6 exp(-90/T), k2,ch3 = 6.0 x 10(1)T3.3 exp(-950/T), k3a(C6H5COCH3 + H) = 4.2 x 10(5)T0.6 exp(-410/T) and k3b(C6H5CHO + CH3) = 6.6 x 10(9)T-0.5 exp(-310/T).     

Pressure and temperature dependence of the reaction of vinyl radical with ethylene

This work reports measurements of absolute rate coefficients and Rice-Ramsperger-Kassel-Marcus (RRKM) master equation simulations of the C2H3+C2H4 reaction. Direct kinetic studies were performed over a temperature range of 300-700 K and pressures of 20 and 133 mbar. Vinyl radicals (H2C=CH) were generated by laser photolysis of vinyl iodide (C2H3I) at 266 nm, and time-resolved absorption spectroscopy was used to probe vinyl radicals through absorption at 423.2 nm. Measurements at 20 mbar are in good agreement with previous determinations at higher temperature. A weighted three-parameter Arrhenius fit to the experimental rate constant at 133 mbar, with the temperature exponent fixed, gives k=(7+/-1)x10(-14) cm3 molecule(-1) s(-1) (T/298 K)2 exp[-(1430+/-70) K/T]. RRKM master equation simulations, based on G3 calculations of stationary points on the C4H7 potential energy surface, were carried out to predict rate coefficients and product branching fractions. The predicted branching to 1-methylallyl product is relatively small under the conditions of the present experiments but increases as the pressure is lowered. Analysis of end products of 248 nm photolysis of vinyl iodide/ethylene mixtures at total pressures between 27 and 933 mbar provides no direct evidence for participation of 1-methylallyl.     

Variational analysis of the phenyl + O2 and phenoxy + O reactions

Variational transition state analysis was performed on the barrierless phenyl + O2 and phenoxy + O association reactions. In addition, we also calculated rate constants for the related vinyl radical (C2H3) + O2 and vinoxy radical (C2H3O) + O reactions and provided rate constant estimates for analogous reactions in substituted aromatic systems. Potential energy scans along the dissociating C-OO and CO-O bonds (with consideration of C-OO internal rotation) were obtained at the O3LYP/6-31G(d) density functional theory level. The CO-O and C-OO bond scission reactions were observed to be barrierless, in both phenyl and vinyl systems. Potential energy wells were scaled by G3B3 reaction enthalpies to obtain accurate activation enthalpies. Frequency calculations were performed for all reactants and products and at points along the potential energy surfaces, allowing us to evaluate thermochemical properties as a function of temperature according to the principles of statistical mechanics and the rigid rotor harmonic oscillator (RRHO) approximation. The low-frequency vibrational modes corresponding to R-OO internal rotation were omitted from the RRHO analysis and replaced with a hindered internal rotor analysis using O3LYP/6-31G(d) rotor potentials. Rate constants were calculated as a function of temperature (300-2000 K) and position from activation entropies and enthalpies, according to canonical transition state theory; these rate constants were minimized with respect to position to obtain variational rate constants as a function of temperature. For the phenyl + O2 reaction, we identified the transition state to be located at a C-OO bond length of between 2.56 and 2.16 A (300-2000 K), while for the phenoxy + O reaction, the transition state was located at a CO-O bond length of 2.00-1.90 A. Variational rate constants were fit to a three-parameter form of the Arrhenius equation, and for the phenyl + O2 association reaction, we found k(T) = 1.860 x 1013T-0.217 exp(0.358/T) (with k in cm3 mol-1 s-1 and T in K); this rate equation provides good agreement with low-temperature experimental measurements of the phenyl + O2 rate constant. Preliminary results were presented for a correlation between activation energy (or reaction enthalpy) and pre-exponential factor for heterolytic O-O bond scission reactions.     

The addition reaction between silylene and ethyne: further isotope studies, pressure dependence studies, and quantum chemical calculations

Time-resolved kinetic studies of the reaction of dideutero-silylene, SiD 2, generated by laser flash photolysis of phenylsilane-d 3, have been carried out to obtain rate constants for its bimolecular reaction with C 2H 2. The reaction was studied in the gas phase over the pressure range 1-100 Torr in SF 6 bath gas, at five temperatures in the range 297-600 K. The second-order rate constants obtained by extrapolation to the high-pressure limits at each temperature fitted the Arrhenius equation log( k (infinity)/cm (3) molecule (-1) s (-1)) = (-10.05 +/- 0.05) + (3.43 +/- 0.36 kJ mol (-1))/ RT ln 10. The rate constants were used to obtain a comprehensive set of isotope effects by comparison with earlier obtained rate constants for the reactions of SiH 2 with C 2H 2 and C 2D 2. Additionally, pressure-dependent rate constants for the reaction of SiH 2 with C 2H 2 in the presence of He (1-100 Torr) were obtained at 300, 399, and 613 K. Quantum chemical (ab initio) calculations of the SiC 2H 4 reaction system at the G3 level support the initial formation of silirene, which rapidly isomerizes to ethynylsilane as the major pathway. Reversible formation of vinylsilylene is also an important process. The calculations also indicate the involvement of several other intermediates, not previously suggested in the mechanism. RRKM calculations are in semiquantitative agreement with the pressure dependences and isotope effects suggested by the ab initio calculations, but residual discrepancies suggest the possible involvement of the minor reaction channel, SiH 2 + C 2H 2 --> Si( (3)P 1) + C 2H 4. The results are compared and contrasted with previous studies of this reaction system.     

Theoretical study on the rate constants for the C2H5 + HBr --> C2H6 + Br reaction

The reaction C(2)H(5) + HBr --> C(2)H(6) + Br has been theoretically studied over the temperature range from 200 to 1400 K. The electronic structure information is calculated at the BHLYP/6-311+G(d,p) and QCISD/6-31+G(d) levels. With the aid of intrinsic reaction coordinate theory, the minimum energy paths (MEPs) are obtained at the both levels, and the energies along the MEP are further refined by performing the single-point calculations at the PMP4(SDTQ)/6-311+G(3df,2p)//BHLYP and QCISD(T)/6-311++G(2df,2pd)//QCISD levels. The calculated ICVT/SCT rate constants are in good agreement with available experimental values, and the calculate results further indicate that the C(2)H(5) + HBr reaction has negative temperature dependence at T < 850 K, but clearly shows positive temperature dependence at T > 850 K. The current work predicts that the kinetic isotope effect for the title reaction is inverse in the temperature range from 200 to 482 K, i.e., k(HBr)/k(DBr) < 1.     

Reaction of phenyl radicals with acetylene: quantum chemical investigation of the mechanism and master equation analysis of the kinetics

The mechanism of the C(6)H(5) + C(2)H(2) reaction has been investigated by various quantum chemical methods. Electrophilic addition to the CC triple bond is found to be the only important mode of phenyl radical attack on acetylene. The initially formed chemically activated C(6)H(5)C(2)H(2) adducts may follow several isomerization pathways in competition with collisional stabilization and H-elimination. Thermochemistry of various decomposition and isomerization channels is evaluated by the G2M method. For key intermediates, the following standard enthalpies of formation have been deduced from isodesmic reactions: 94.2 +/- 2.0 kcal/mol (C(6)H(5)CHCH), 86.4 +/- 2.0 kcal/mol (C(6)H(5)CCH(2)), and 95.5 +/- 1.8 kcal/ mol (o-C(6)H(4)C(2)H(3)). The accuracy of theoretical predictions was examined through extensive comparisons with available experimental and theoretical data. The kinetics and product branching of the C(6)H(5) + C(2)H(2) reaction have been evaluated by weak collision master equation/Rice-Ramsperger-Kassel-Marcus (RRKM) analysis of the truncated kinetic model including only kinetically important transformations of the isomeric C(8)H(7) radicals. Available experimental kinetic data can be quantitatively reproduced by calculation with a minor adjustment of the C(6)H(5) addition barrier from 3.7 to 4.1 kcal/mol. Our predicted total rate constant, k(R1) = (1.29 x 10(10))T(0.834) exp(-2320/T) cm(3) mol(-)(1) s(-)(1), is weakly dependent on P and corresponds to the phenylation process under combustion conditions (T > 1000 K).     

Kinetics and mechanisms of CF3CHFOCH3, CF3CHFOC(O)H, and FC(O)OCH3 reactions with OH radicals

The kinetics and mechanism of oxidation of CF3CHFOCH3 was studied using an 11.5-dm3 environmental reaction chamber. OH radicals were produced by UV photolysis of an O3-H2O-He mixture at an initial pressure of 200 Torr in the chamber. The rate constant of the reaction of CF3CHFOCH3 with OH radicals (k1) was determined to be (1.77 +/- 0.69) x 10(-12) exp[(-720 +/- 110)/T] cm3 molecule(-1)(s-1) by means of a relative rate method at 253-328 K. The mechanism of the reaction was investigated by FT-IR spectroscopy at 298 K. CF3CHFOC(O)H, FC(O)OCH3, and COF2 were determined to be the major products. The branching ratio (k1a/k1b) for the reactions CF3CHFOCH3 + OH --> CF3CHFOCH2* + H2O (k1a) and CF3CHFOCH3 + OH --> CF3CF*OCH3 + H2O (k1b) was estimated to be 4.2:1 at 298 K from the yields of CF3CHFOC(O)H, FC(O)OCH3, and COF2. The rate constants of the reactions of CF3CHFOC(O)H (k2) and FC(O)OCH3 (k3) with OH radicals were determined to be (9.14 +/- 2.78) x 10(-13) exp[(-1190 +/- 90)/T] and (2.10 +/- 0.65) x 10(-13) exp[(-630 +/- 90)/T] cm3 molecule(-1)(s-1), respectively, by means of a relative rate method at 253-328 K. The rate constants at 298 K were as follows: k1 = (1.56 +/- 0.06) x 10-13, k2 = (1.67 +/- 0.05) x 10-14, and k3 = (2.53 +/- 0.07) x 10-14 cm3 molecule(-1)(s-1). The tropospheric lifetimes of CF3CHFOCH3, CF3CHFOC(O)H, and FC(O)OCH3 with respect to reaction with OH radicals were estimated to be 0.29, 3.2, and 1.8 years, respectively.     

Reaction of phenyl radical with propylene as a possible source of indene and other polycyclic aromatic hydrocarbons: an ab initio/RRKM-ME study

Ab initio G3(MP2,CC)//B3LYP/6-311G** calculations have been performed to investigate the potential energy surface (PES) and mechanism of the reaction of phenyl radical with propylene followed by kinetic RRKM-ME calculations of rate constants and product branching ratios at various temperatures and pressures. The reaction can proceed either by direct hydrogen abstraction producing benzene and three C(3)H(5) radicals [1-propenyl (CH(3)CHCH), 2-propenyl (CH(3)CCH(2)), and allyl (CH(2)CHCH(2))] or by addition of phenyl to the CH or CH(2) units of propylene followed by rearrangements on the C(9)H(11) PES producing nine different products after H or CH(3) losses. The H abstraction channels are found to be kinetically preferable at temperatures relevant to combustion and to contribute 55-75% to the total product yield in the 1000-2000 K temperature range, with the allyl radical being the major product (~45%). The relative contributions of phenyl addition channels are calculated to be ~35% at 1000 K, decreasing to ~15% at 2000 K, with styrene + CH(3) and 3-phenylpropene + H being the major products. Collisional stabilization of C(6)H(5) + C(3)H(6) addition complexes is computed to be significant only at temperatures up to 1000-1200 K, depending on the pressure, and maximizes at low temperatures of 300-700 K reaching up to 90% of the total product yield. At T > 1200 K collisional stabilization becomes negligible, whereas the dissociation products, styrene plus methyl and 3-phenylpropene + H, account for up to 45% of the total product yield. The production of bicyclic aromatic species including indane C(9)H(10) is found to be negligible at all studied conditions indicating that the phenyl addition to propylene cannot be a source of polycyclic aromatic hydrocarbons (PAH) on the C(9)H(11) PES. Alternatively, the formation of a PAH molecule, indene C(9)H(8), can be accomplished through secondary reactions after activation of a major product of the C(6)H(5) + C(3)H(6) addition reaction, 3-phenylpropene, by direct hydrogen abstraction by small radicals, such as H, OH, CH(3), etc. It is shown that at typical combustion temperatures 77-90% of C(9)H(9) radicals formed by H-abstraction from 3-phenylpropene undergo a closure of a cyclopentene ring via low barriers and then lose a hydrogen atom producing indene. This results in 7.0-14.5% yield of indene relative to the initial C(6)H(5) + C(3)H(6) reactants within the 1000-2000 K temperature range.     

H atom attack on propene

The reaction of propene (CH(3)CH═CH(2)) with hydrogen atoms has been investigated in a heated single-pulsed shock tube at temperatures between 902 and 1200 K and pressures of 1.5-3.4 bar. Stable products from H atom addition and H abstraction have been identified and quantified by gas chromatography/flame ionization/mass spectrometry. The reaction for the H addition channel involving methyl displacement from propene has been determined relative to methyl displacement from 1,3,5-trimethylbenzene (135TMB), leading to a reaction rate, k(H + propene) → H(2)C═CH(2) + CH(3)) = 4.8 × 10(13) exp(-2081/T) cm(3)/(mol s). The rate constant for the abstraction of the allylic hydrogen atom is determined to be k(H + propene → CH(2)CH═CH(2) + H(2)) = 6.4 × 10(13) exp(-4168/T) cm(3)/(mol s). The reaction of H + propene has also been directly studied relative to the reaction of H + propyne, and the relationship is found to be log[k(H + propyne → acetylene + CH(3))/k(H + propene → ethylene + CH(3))] = (-0.461 ± 0.041)(1000/T) + (0.44 ± 0.04). The results showed that the rate constant for the methyl displacement reaction with propene is a factor of 1.05 ± 0.1 larger than that for propyne near 1000 K. The present results are compared with relevant earlier data on related compounds.     

CH(A2Delta) Formation in hydrocarbon combustion: the temperature dependence of the rate constant of the reaction C2H + O2--> CH(A2Delta) + CO2

The temperature dependence of the rate constant of the chemiluminescence reaction C2H + O2 --> CH(A) + CO2, k1e, has been experimentally determined over the temperature range 316-837 K using pulsed laser photolysis techniques. The rate constant was found to have a pronounced positive temperature dependence given by k1e(T) = AT(4.4) exp(1150 +/- 150/T), where A = 1 x 10(-27) cm(3) s(-1). The preexponential factor for k1e, A, which is known only to within an order of magnitude, is based on a revised expression for the rate constant for the C2H + O(3P) --> CH(A) + CO reaction, k2b, of (1.0 +/- 0.5) x 10(-11) exp(-230 K/T) cm3 s(-1) [Devriendt, K.; Van Look, H.; Ceursters, B.; Peeters, J. Chem. Phys. Lett. 1996, 261, 450] and a k2b/k1e determination of this work of 1200 +/- 500 at 295 K. Using the temperature dependence of the rate constant k1e(T)/k1e(300 K), which is much more accurately and precisely determined than is A, we predict an increase in k(1e) of a factor 60 +/- 16 between 300 and 1500 K. The ratio of rate constants k2b/k1e is predicted to change from 1200 +/- 500 at 295 K to 40 +/- 25 at 1500 K. These results suggest that the reaction C2H + O2 --> CH(A) + CO2 contributes significantly to CH(A-->X) chemiluminescence in hot flames and especially under fuel-lean conditions where it probably dominates the reaction C2H + O(3P) --> CH(A) + CO.     

Theoretical investigation of the hydrogen abstraction reaction of the OH radical with CH3CHF2 (HFC152-a): a dual level direct density functional theory dynamics study

The hydrogen abstraction reaction of the OH radical with CH(3)CHF(2) (HFC152-a) has been studied theoretically over a wide temperature range, 200-3000 K. Two different reactive sites of the molecule, CH(3) and CHF(2) groups have been investigated precisely, and results confirm that CHF(2) position of the molecule is a highly reactive site. In this study, three recently developed hybrid density functional theories, namely, MPWB1K, MPW1B95, and MPW1K, are used. The MPWB1K/6-31+G(d,p) method gives the best result for kinetic calculations, including barrier heights, reaction path information and geometry of transition state structures and other stationary points. To refine the barrier height of each channel, a single point energy calculation was performed in MPWB1K/MG3S method. The obtained rate constants by dual level direct dynamics with the interpolated single point energy method (VTST-ISPE) using DFT quantum computational methods, are consistent with available experimental data. The canonical variational transition state theory (CVT) with the zero-curvature and also the small-curvature tunneling correction methods is used to calculate the rate constants. Over the temperature range 200-3000 K, the variation effect, tunneling contribution, branching ratio of each channel are calculated. The rate constants and their temperature dependency in the form of a fitted three-parameter Arrhenius expression are k(1)(T) = 2.00 x 10(-19)(T)(2.24) exp(-1273/T), k(2)(T) = 1.95 x 10(-19)(T)(2.46) exp(-2374/T), and k(T) = 3.13 x 10(-19)(T)(2.47) exp(- 1694/T) cm(3) molecule(-1) s(-1). For the H abstraction from the CHF(2) group, a nonclassical reflection effect is detected as a dominant quantum effect.     

Shock tube and theoretical studies on the thermal decomposition of propane: evidence for a roaming radical channel

The thermal decomposition of propane has been studied using both shock tube experiments and ab initio transition state theory-based master equation calculations. Dissociation rate constants for propane have been measured at high temperatures behind reflected shock waves using high-sensitivity H-ARAS detection and CH(3) optical absorption. The two major dissociation channels at high temperature are C(3)H(8) → CH(3) + C(2)H(5) (eq 1a) and C(3)H(8) → CH(4) + C(2)H(4) (eq 1b). Ultra high-sensitivity ARAS detection of H-atoms produced from the decomposition of the product, C(2)H(5), in (1a), allowed measurements of both the total decomposition rate constants, k(total), and the branching to radical products, k(1a)/k(total). Theoretical analyses indicate that the molecular products are formed exclusively through the roaming radical mechanism and that radical products are formed exclusively through channel 1a. The experiments were performed over the temperature range 1417-1819 K and gave a minor contribution of (10 ± 8%) due to roaming. A multipass CH(3) absorption diagnostic using a Zn resonance lamp was also developed and characterized in this work using the thermal decomposition of CH(3)I as a reference reaction. The measured rate constants for CH(3)I decomposition agreed with earlier determinations from this laboratory that were based on I-atom ARAS measurements. This CH(3) diagnostic was then used to detect radicals from channel 1a allowing lower temperature (1202-1543 K) measurements of k(1a) to be determined. Variable reaction coordinate-transition state theory was used to predict the high pressure limits for channel (1a) and other bond fission reactions in C(3)H(8). Conventional transition state theory calculations were also used to estimate rate constants for other tight transition state processes. These calculations predict a negligible contribution (<1%) from all other bond fission and tight transition state processes, indicating that the bond fission channel (1a) and the roaming channel (1b) are indeed the only active channels at the temperature and pressure ranges of the present experiments. The predicted reaction exo- and endothermicities are in excellent agreement with the current version of the Active Thermochemical Tables. Master equation calculations incorporating these transition state theory results yield predictions for the temperature and pressure dependence of the dissociation rate constants for channel 1a. The final theoretical results reliably reproduce the measured dissociation rate constants that are reported here and in the literature. The experimental data are well reproduced over the 500-2500 K and 1 × 10(-4) to 100 bar range (errors of ～15% or less) by the following Troe parameters for Ar as the bath gas: k(∞) = 1.55 × 10(24)T(-2.034) exp(-45?490/T) s(-1), k(0) = 7.92 × 10(53)T(-16.67) exp(-50?380/T) cm(3) s(-1), and F(c) = 0.190 exp(-T/3091) + 0.810 exp(-T/128) + exp(-8829/T).     

A combined experimental and theoretical study of the reaction between methylglyoxal and OH/OD radical: OH regeneration

Experimental studies have been conducted to determine the rate coefficient and mechanism of the reaction between methylglyoxal (CH(3)COCHO, MGLY) and the OH radical over a wide range of temperatures (233-500 K) and pressures (5-300 Torr). The rate coefficient is pressure independent with the following temperature dependence: k(3)(T) = (1.83 +/- 0.48) x 10(-12) exp((560 +/- 70)/T) cm(3) molecule(-1) s(-1) (95% uncertainties). Addition of O(2) to the system leads to recycling of OH. The mechanism was investigated by varying the experimental conditions ([O(2)], [MGLY], temperature and pressure), and by modelling based on a G3X potential energy surface, rovibrational prior distribution calculations and master equation RRKM calculations. The mechanism can be described as follows: Addition of oxygen to the system shows that process (4) is fast and that CH(3)COCO completely dissociates. The acetyl radical formed from reaction (4) reacts with oxygen to regenerate OH radicals (5a). However, a significant fraction of acetyl radical formed by reaction (R4) is sufficiently energised to dissociate further to CH(3) + CO (R4b). Little or no pressure quenching of reaction (R4b) was observed. The rate coefficient for OD + MGLY was measured as k(9)(T) = (9.4 +/- 2.4) x 10(-13) exp((780 +/- 70)/T) cm(3) molecule(-1) s(-1) over the temperature range 233-500 K. The reaction shows a noticeable inverse (k(H)/k(D) < 1) kinetic isotope effect below room temperature and a slight normal kinetic isotope effect (k(H)/k(D) > 1) at high temperature. The potential atmospheric implications of this work are discussed.     

Experimental and theoretical studies of rate coefficients for the reaction O(3P)+C2H5OH at high temperatures

Rate coefficients of the reaction O(3P)+C2H5OH in the temperature range 782-1410 K were determined using a diaphragmless shock tube. O atoms were generated by photolysis of SO2 at 193 nm with an ArF excimer laser; their concentrations were monitored via atomic resonance absorption. Our data in the range 886-1410 K are new. Combined with previous measurements at low temperature, rate coefficients determined for the temperature range 297-1410 K are represented by the following equation: k(T)=(2.89+/-0.09)x10(-16)T1.62 exp[-(1210+/-90)/T] cm3 molecule(-1) s(-1); listed errors represent one standard deviation in fitting. Theoretical calculations at the CCSD(T)/6-311+G(3df, 2p)//B3LYP/6-311+G(3df) level predict potential energies of various reaction paths. Rate coefficients are predicted with the canonical variational transition state (CVT) theory with the small curvature tunneling correction (SCT) method. Reaction paths associated with trans and gauche conformations are both identified. Predicted total rate coefficients, 1.60 x 10(-22)T3.50 exp(16/T) cm3 molecule(-1) s(-1) for the range 300-3000 K, agree satisfactorily with experimental observations. The branching ratios of three accessible reaction channels forming CH3CHOH+OH (1a), CH2CH2OH+OH (1b), and CH3CH2O+OH (1c) are predicted to vary distinctively with temperature. Below 500 K, reaction 1a is the predominant path; the branching ratios of reactions 1b,c become approximately 40% and approximately 11%, respectively, at 2000 K.     

Direct ab initio dynamics study on the rate constants and kinetic isotope effect for the reactions of H atoms with GeDn(CH3)4-n (n = 1-4)

Direct ab initio dynamic calculations are performed on the reactions of atomic hydrogen with GeD(n)(CH(3))(4-n) (n = 1-4) over the temperature range 200-2000 K at the PMP4SDTQ/6-311 +G(3df,2p)//MP2/6-31 +G(d) (for n = 2-4) and G2//MP2/6-31 +G(d) (for n = 1) levels. The corresponding k(H)/k(D) ratios are then calculated in order to determine the kinetic isotope effect for the four reactions. For the simplest GeD(4) +H reaction, the only one that has available experimental data, the calculated canonical variational transition state theory incorporates small-curvature tunneling correction (CVT/SCT) thermal rate constants, and the k(H)/k(D) values are in good agreement with the experimental values within the experimental temperature range 293-550 K. For the four GeD(n)(CH(3))(4-4) (n = 1-4) reactions, the variational effect is small over the whole temperature range, whereas the small-curvature effect is important in the lower temperature range. Finally, the overall rate constants are fitted to the three-parameter expression over the whole temperature range 200-2000 K as 5.8 x 10(8)T(1.68)exp(-929/T), 1.7 x 10(8)T(1.80)exp(-691/T), 2.58 x 10(8)T(1.71)exp(-706/T), and 1.0 x 10(7)T(2.08)exp(-544/T) cm(3) mol(-1) s(-1) for the n = 4, 3, 2, and 1 reactions. Our work may represent the first theoretical study of the kinetic isotope effect for the H-attack on the G-H bonding.