Untersuchungen zur Bestimmung von Spurenelementen in Blutserum mit Hilfe der Totalreflexions-R?ntgenfluoreszenzanalyse

Summary The quantitative determination of trace elements in human blood serum by Total Reflection X-Ray Fluorescence Analysis (TXRF) is influenced by absorption- and reflection-effects caused by the organic (proteins) and inorganic (P, S, Na, K, Ca, Cl) matrices. To minimize these effects we have developed a sample preparation technique based on the decomposition of the organic matrix and followed by the separation of the trace elements from the organic matrix by ion-exchange. The described method enables the simultaneous determination of K (1584 g), Ca (666 g), Fe (22 g), Cu (9.6 g), Zn (8.8 g), Se (0.97 g), Sn (1.3 g), Pb (0.12 g) and Rb (1.6 g) (obtained values in parentheses).

---

---

Herrn Prof. Dr. G. Tölg zum 60. Geburtstag gewidmet     

Spectrophotometric determination of bromide

A Spectrophotometric method for bromide determination has been developed. Bromide is converted to tribromide which absorbs at 267 nm. The detection limit is 0.01 g/ml bromide. As little as 0.4 g of bromide can be determined in an excess of chloride and sulfate with a coefficient of variation of 4%.     

Simultaneous determination of zinc and mercury with 5,10,15,20-tetrakis(3-chloro-4-sulfophenyl)porphine by differential rate kinetics and flow injection analysis

A rapid and sensitive differential rate kinetic method for the simultaneous and sequential determination of zinc and mercury with 5,10,15,20-tetrakis-(3-chloro-4-sulfophenyl)porphine (m-Cl-TPPS₄) has been based on flow injection spectrophotometry. By proper stopped-flow of the merging zone, the metalloporphyrin complexes of zinc and mercury were simultaneously determined at the maximum absorbance wavelength of 425.7 nm with the proportional equation. The relative standard deviations for 1.0 g/ml zinc and 5.0 g/ml mercury with 100 l sampling volume were 0.43% and 0.62%, respectively, for 8 parallel determinations. The calibration graphs were linear over the concentration range 0–3.0 g Zn/ml and 0–12.0 g Hg/ml. The method has been applied to the analysis of synthetic water samples with satisfactory recovery.     

Simultaneous determination of cobalt,nickel and iron by multi-wavelength spectrophotometry

A method for the simultaneous spectrophotometric determination of cobalt, nickel and iron based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide is proposed. The absorption curves of these complexes overlap severely in the scanning range 390–510 nm. The analyte concentrations are calculated by a least squares fit of the pure spectra to the mixture spectra, which therefore makes the simultaneous determination of these metallic ions possible without tedious pretreatment. The detection limits afforded by the proposed method range from 0.05 g/ml for Fe and Ni to 0.1 g/ml for Co. Root-mean-squared errors of prediction of 0.085 g/ml for Co, 0.048 g/ml for Ni and 0.1172 g/ml for Fe were obtained using the wavelength range 400–510 nm and 0.147 g/ml for Co, 0.107 g/ml for Ni and 0.127 g/ml for Fe using the wavelength range 420–434 nm. The effect of interferences is studied and the proposed method is applied to analysis for the above elements in synthetic samples and real samples, such as biological materials and alloys.     

Catalytic Spectrophotometric Determination of Bromide Based on the Diphenylcarbazide–Chromium(VI)–Iodate Reaction

A new catalytic spectrophotometric method for the determination of bromide is proposed. Diphenylcarbazide reacts with chromium(VI) ions in an acid medium to give a violet complex. The method is based on the bromide-catalyzed oxidation of this violet complex by iodate followed by measuring the color change at = 542 nm spectrophotometrically. The reaction starts after an induction period. Bromide ions catalyze this reaction, so that the induction period is decreased by the addition of Br^–. The derivative of the absorbance with respect to time was calculated. The maximum absorbance difference (A _m) and thetime taken to reach the maximum difference (t _m) were measured from the derivative curve. These values are used as the measured parameters for bromide determination. Under optimum conditions bromide can be determined in the range of 0.5–8 g/mL. The detection limit is 0.25 g/mL, and the relative standard deviation for ten replicate measurements of 1 g/mL of bromide is 1.57%. The method was applied to the determination of bromide in the Persian Gulf water.     

Determination of sulphathiazole in the presence of sulphametazine by first-derivative solid-phase spectrophotometry

Sulphathiazole in the presence of sulphametazine is determined by a method based on derivative solid-phase spectrophotometry. Both compounds are fixed on a dextran-type cation-exchange gel. The absorbance of the gel, packed in a 1-mm silica cell, is measured directly. The range of application is between 0.20 and 18.0 g/ml of sulphathiazole in the presence of up to 20 g/ml of sulphametazine, the relative standard deviation is 0.6% and the detection limit is 0.05 g/ml. The method has been applied to the determination of sulphathiazole in synthetic mixtures and pharmaceuticals, with recoveries of 95.0 to 102.5%     

Nuclear interferences of uranium and thorium in a reactor neutron activation analysis determination of cerium using the radionuclides141Ce and143Ce

The interference contributions of uranium and thorium to the determination of cerium based on radionuclides¹⁴¹Ce and¹⁴³Ce produced by irradiation in a reactor core was determined. The values of the interference contributions for¹⁴¹Ce were 0.28±0.01 g Ce/g U and /2.01±0.05/x10^–3 g Ce/g Th, and for¹⁴³Ce 1.33±0.03 g Ce/g U and /9.0±0.2/x10^–3 g Ce/g Th.     

Determination of nitrogen in uranium and uranium-oxide by high-temperature gas-extraction

Summary The reducing fusion gas extraction method has been used for the determination of nitrogen in uranium metal and uranium dioxide reference materials at levels of about 10–15g·g^–1. It has been found that when extracting at temperatures above 2700° C the use of a platinum flux is no longer necessary. Pure nitrogen and nitrogen-helium mixtures were used for calibrating the detection unit in the range of 1.5–670 g. The calibration of the extraction was performed with metallic reference materials in the range of 8–331 g N₂ content.

---

Bestimmung von Stickstoff in Uran und Uranoxid durch Hochtemperatur-Gasextraktion

Zusammenfassung Die Gasextraktion aus reduzierender Schmelze wurde zur Stickstoffbestimmung in Uranmetall- und Urandioxid-Referenzmaterialien bei Gehalten von 10–15 g·g^–1 angewendet. Bei Temperaturen über 2700° C ist kein Platinbad mehr erforderlich. Zur Eichung der Detektionseinheit im Bereich von 1,5–670 g wurden reiner Stickstoff oder Stickstoff-Helium-Mischungen benutzt. Zur Eichung der Extraktion wurden metallische Referenzmaterialien mit (8–331g) N₂ eingesetzt.

     

Determination of Promedol (Trimeperidine) and Ketamine in Blood Using Gas Chromatography–Mass Spectrometry

A procedure was developed for the gas-chromatographic determination of promedol (trimeperidine) and ketamine in whole blood with mass-selective detection. The detection limit for trimeperidine and ketamine in blood is 0.05 g/mL. The analytical range is 0.1–5.0 g/mL. The maximum within-series errors in the determination of the studied compounds are no higher than 14.1% for concentrations of 0.10 g/mL and 7.47% for concentrations of 1.0 g/mL. The maximum between-series relative errors are 5.75% for concentrations of 0.10 g/mL and 2.7% for concentrations of 1.0 g/mL. The procedure can be used in toxicological and clinical analyses.     

Speciation of Cr(III) and Cr(VI) by reversed phase high-performance liquid chromatography using UV-detection

Summary A method for the simultaneous determination of Cr(III) and Cr(VI) in water samples is described. The different reaction products of Cr(III) and Cr(VI) species with ammonium pyrrolidinedithiocarbamate (APDC) are extracted with ethyl acetate and determined by reversed phase HPLC using UV-detection. The procedure is optimized and its detection limit accordingly improved as compared to literature data. The detection limits achieved are 2.4 g/l for Cr(III) and 2.1 g/l for Cr(VI) and the calibration curves are linear between 5 g/l and 5000 g/l. For the speciation of Cr, APDC was demonstrated to be more suitable as chelating agent than sodium diethyldithiocarbamate (NaDDC). The procedure was applied to the determination of both Cr species in galvanic waste waters and its accuracy was approved by comparing the results (at the 100 g/l level) with those of a photometric determination of Cr(VI) species.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Redox Properties of Trinuclear Osmium Carbonylhydride Clusters with Unsaturated Ligands

Schemes of redox transformations were proposed for osmium carbonylhydride clusters: trinuclear (-H)Os₃(-CR = CHR')(CO)_{1 0} (R = R' = H, Ph; R = H, R' = Ph), (-H)₂Os₃(₃-L)(CO)₉ (L = C = CHPh, CHCPh), tetranuclear CpMnOs₃ (-CH = CHPh)(-H)(-CO)(CO)_{1 1}, and trinuclear Os₃(₃-C = CHPh)(CO)₉. Two-electron reduction of the trinuclear clusters results in elimination of the unsaturated ligand with preservation of the metal framework.     

Grenzkonzentration und Erfassungsgrenze quantitativer Analysenmethoden. Berechnung dieser Kennzahlen für (spektral-)photometrische Verfahren

Zusammenfassung Es wird vorgeschlagen, den unteren Anwendungsbereich quantitativer Methoden ebenso wie in der qualitativen Mikroanalyse durch die Begriffe Grenzkonzentration und Erfassungsgrenze zu kennzeichnen. Durch die Ableitung dieser Werte nach mathematisch-statistischen Regeln erhalten Grenzkonzentration und Erfassungsgrenze den Charakter objektiver Kennzahlen. Für photometrische und spektralphotometrische Methoden werden Gleichungen zur Berechnung der Grenzkonzentration ing/ml und in Prozent der Probe, sowie der Erfassungsgrenze ing Substanz angegeben. Berechnungsgrundlagen sind die Streuung der Blindwerte, der molare Extinktionskoeffizient oder der Sandellsche Empfindlichkeitsindex und andere analytische Parameter.

---

Summary It is suggested that the lower application region of quantitative methods, just as in the case of qualitative microanalyses, be characterized by the concepts limiting concentration and detection limit. These values acquire the character of objective coefficients when they are derived in accord with mathematical-statistical laws. Equations for calculating the limiting concentration ing/ml and in % of the sample, as well as the detection limit ing of the material, are given for photometric and spectrophotometric methods. The bases for the calculation are the dispersion of the blank values, the molar extinction coefficient, or the Sandell sensitivity index and other analytical parameters.

---

---

Herrn Professor Dr.Hans Lieb aus Anlaß seines 80. Geburtstages gewidmet.     

The microgram determination of iodides, bromides and chlorides by mercurimetry

Summary A method for the microquantitative colorimetric analysis of iodide, bromide and chloride ions separately and in mixtures has been developed. Approximately 2 g of halogen ions can be determined to within 0.5 g. The method could probably be made more sensitive by determining the optical density of thicker layers.

---

Zusammenfassung Es wurde ein Verfahren ausgearbeitet zur colorimetrischen Mikro-bestimmung von Jodid, Bromid und Chlorid allein und in Mischungen. Noch 2 g Halogenionen können auf 0,5 g genau bestimmt werden. Durch Messung größerer Schichtdicken kann die Methode wahrscheinlich noch empfindlicher gestaltet werden.

     

Fällungsanalyse im Mikrogrammbereich: Eine neue Methode

Zusammenfassung Eine neue Methode zur Durchführung gravimetrischer Bestimmungen im Mikrogrammbereich wurde beschrieben; diese beruht im wesentlichen darauf, daß der Niederschlag nicht mehr zusammen mit dem Filter, sondern nach Überführen mit einem geeigneten Lösungsmittel in einem separaten Wägegefäß gewogen wird.Die dazu nötigen Geräte und deren Herstellung wurden beschrieben. Nach dieser Methode wurden folgende Bestimmungen mit zufriedenstellender Richtigkeit durchgeführt: 2,5–25g Al, 5–50g Cu und 5–50g Zn mit Oxin, 2,5–25g Fe(III) und 2,5–25g Ti(IV) mit N-Benzoyl-phenylhydroxylamin, 5–50g Ni und 5–50g Cu mit Salicylaldoxim, 2,5–50g Co(II) und 2,5–50g Fe(III) mit -Nitroso--naphthol sowie 5–50g Chlorid als Silberchlorid.

---

Precipitation analysis in the microgram-scale: A new method

Summary A new method for gravimetric determinations in the microgram-scale is described. This method is based on the fact that the precipitate is not weighed together with the filter but is transferred to a separate weighingvessel using a suitable solvent. The necessary simple devices and their use are described. The following determinations were carried out with satisfying accuracy: 2,5–25g Al, 5–50g Cu and 5–50g Zn with Oxine, 2,5–25g Fe and 2,5–25g Ti withN-benzoylphenylhydroxylamine, 5–50g Ni and 5–50g Cu with salicylaldoxime, 2,52–50g Co and 2,5–50g Fe with -nitroso--naphthol and 5–50g chloride as silver chloride.

     

Certified reference materials (CRM 408 and 409) for quality control of main components (ammonium, calcium, hydronium, magnesium, nitrate, potassium, sodium and sulphate) in simulated rain water

Analyses of rainwater are routinely performed by a number of organisations to monitor the contribution from rainwater to the component occurrences in the environment and the acidification of the environment. To control the quality of such determinations, the Community Bureau of Reference (BCR) has organised a certification campaign to produce two simulated rainwater reference materials (CRM 408, low mineral content and CRM 409, high mineral content). The materials were carefully prepared (addition of pro analysis and supra pure reagents with the mentioned elements to silica-free deionised water) and its homogeneity and long-term stability were verified. The materials were certified for their contents of ammonium (106 mol/kg) (CRM 409), calcium (7.68 and 15.5 mol/kg), chloride (67.3 and 113 mol/kg), hydronium (16.6 and 48.0 mol/kg), magnesium (6.14 and 12.3 mol/kg), nitrate (20.1 and 78.1 mol/kg), potassium (4.25 mol/kg) (CRM 409), sodium (42.0 and 82.9 mol/kg) and sulphate (10.5 and 53.2 mol/kg). Indicative values (not certified) are given for ammonium and potassium in CRM 408. This paper presents the certification work performed, as well as the analytical work for the certification of the contents of relevant species.     

Trace analysis of cationic surfactants in water using HPLC with conductometric detection

Summary A simple and fast determination of trace amounts of commercially used cationic surfactants is described. After extraction from water cationic surfactants are separated by HPLC and detected by conductometry. The detection limit is 3 g/l for distearyldimethylammonium chloride, 16 g/l for ditallowimidazolinium methosulphate, and 6 g/l for dodecylpyridinium chloride.     

Determination of 2-mercaptobenzothiazole in river water by HPLC

Summary A method is proposed for the determination of 2-mercaptobenzothiazole in river waters using multi-electrode electrochemical detection HPLC. 2-mercaptobenzothiazole determination is unsatisfactory by gas chromatography as it degrades readily on the column. Multielectrode electrochemical detection HPLC combines sensitivity and the ability to screen out other electrochemically active species. The development work leading up to the proposed method is discussed. The method has a limit of detection of 0.798gl^–1 2-mercaptobenzothiazole and a total standard deviation of 2.06gl^–1 2-mercaptobenzothiazole at a concentration of 7.97gl^–1 2-mercaptobenzothiazole in river water.     

Bestimmung von Ascorbinsäure auf Grund ihrer in einem Landolt-System ausgeübten reduzierenden Wirkung

Zusammenfassung Im Bromat-Jodid-Ascorbinsäure-System hängt die Zeit, die bis zur Jodausscheidung vergeht, von der Konzentration der Ascorbinsäure ab. Unter entsprechenden Versuchsbedingungen ist die Reaktionszeit proportional der Ascorbinsäurekonzentration. Danach kann die Ascorbinsäure sowohl mit Hilfe der Simultankomparationsmethode, als auch chronometrisch bestimmt werden. Die Genauigkeit ist ± 3% im Bereich von 5 bis 300g/5 ml. Die Grenzen der Bestimmung sind 1g bzw. 1000g Ascorbinsäure in 5 ml.

---

Determination of ascorbic acid on the basis of its reducing action in a landolt system

Summary In the bromate-iodide-ascorbic acid system, the time that elapses until the iodine appears is dependent on the concentration of the ascorbic acid. Under appropriate experimental conditions, the reaction time is proportional to the ascorbic acid concentration. Accordingly, the ascorbic acid may be determined with the aid not only of the simultaneous comparison method but also chronometrically. The precision is ± 3% in the 5–300g/5 ml range. The limits of the determination are 1g and 1000g ascorbic acid in 5 ml respectively.

     

Preconcentration and determination of naphthalene in air and water using activated carbon adsorption,carbon disulfide extraction and gas chromatography

A new method for the determination of naphthalene in air and water has been developed. The naphthalene was preconcentrated using activated carbon adsorption with carbon disulfide extraction and determined by gas chromatography with flame ionization detection. The chromatographic peak of naphthalene was separated well from the potential interferents turpentine, terpenene, isoborneol, camphor and isobornyl acetate. The detection limit was 0.52 g/ml of CS₂, equivalent to 2.6 g/m³ of air or 0.05 g/ml in 50 ml of water. The precision for 10 g/ml naphthalene was 1.7%. The adsorption capacity, sampling efficiency and desorption efficiency of 100 mg of activated carbon for naphthalene in air were 8.8 mg, 98.8% and 95.2%, respectively. The extraction efficiency of 5 ml of carbon disulfide for naphthalene in water was 97.6%. The method was successfully applied to the determination of naphthalene in air and water from an industrial plant.