Quantitative accounting for the medium effect at the catalytic decomposition of H<Subscript>2</Subscript>O<Subscript>2</Subscript> in hydrophilic solvents

The experimental data on the effect of physicochemical properties of solvent on the rate of hydrogen peroxide decomposition catalyzed by cobalt ions were obtained using a method of adding inhibitors and were generalized quantitatively by the application of multiparametric linear equations.     

Direct synthesis of hydrogen peroxide from hydrogen and oxygen over Pd-supported HNb<Subscript>3</Subscript>O<Subscript>8</Subscript> metal oxide nanosheet catalyst

A two-dimensional layered niobium oxide and its exfoliated nanosheet were examined as potential solid acid supports for direct synthesis of hydrogen peroxide from hydrogen and oxygen under intrinsically safe and noncorrosive reaction conditions. The catalytic performance strongly depended on the acid strength of the support material. The Pd-supported protonated niobium oxide nanosheet catalyst (Pd/HNb₃O₈-NS) with remarkably enhanced acidity was superior to layered Pd/KNb₃O₈ or Pd/HNb₃O₈ to promote the reaction. Hydrogen peroxide decomposition testing revealed that, although HNb₃O₈ was comparable to its exfoliated counterpart, HNb₃O₈-NS, in suppressing hydrogen peroxide decomposition without hydrogen, HNb₃O₈ was virtually ineffective in preventing hydrogen peroxide hydrogenation in the presence of hydrogen. However, compared with HNb₃O₈, HNb₃O₈-NS was found to be still effective at suppressing hydrogen peroxide hydrogenation. The different efficiency observed between HNb₃O₈ and HNb₃O₈-NS in the prevention of hydrogen peroxide hydrogenation implies that use of a highly acidic support is advantageous to effectively suppress faster and therefore more unfavorable hydrogen peroxide hydrogenation compared with decomposition. This result clearly demonstrates that the highly acidic HNb₃O₈ nanosheet can serve as an efficient solid acid support for direct synthesis of hydrogen peroxide from hydrogen and oxygen.     

The monooxidation of ethylene with hydrogen peroxide on the per-FTPhPFe<Superscript>3+</Superscript>OH/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> biomimetic

The gas-phase monooxidation of ethylene by hydrogen peroxide on a biomimetic heterogeneous catalyst (per-FTPhPFe³⁺OH/Al₂O₃) was studied under comparatively mild conditions. The biomimetic oxidation of ethylene with hydrogen peroxide was shown to be coherently synchronized with the decomposition of H₂O₂. Depending on reaction medium conditions, one of two desired products was formed, either ethanol or acetaldehyde. The kinetics and probable mechanism of ethylene transformation were studied.     

Kinetics and mechanism of decomposition of peroxide compounds in the liquid phase of the KOH-H<Subscript>2</Subscript>O<Subscript>2</Subscript>-H<Subscript>2</Subscript>O system in vessels made of various materials

Decomposition kinetics of peroxide compounds in the liquid phase of the system KOH-H₂O₂-H₂O at an initial hydrogen peroxide concentration of about 14.5 M and pH 12.7 in vessels made of Pyrex glass, polyethylene terephthalate, and 12Kh18N10T steel was studied in the temperature range from ?10 to +50°C. The main kinetic parameters of the processes under study were determined. The influence exerted by the material of the reaction vessel on the kinetics and mechanism of decomposition of peroxide compounds in the liquid phase of the system under study were determined.     

Binary ZrO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> xerogels: Synthesis and properties

Binary systems of silica and zirconia xerogels have been prepared by hydrolysis of zirconium(IV) oxychloride in the silica gel matrix. Systems of various composition have been studied by ¹H NMR, IR spectroscopy, and thermogravimetry and have been tested in a model process of hydrogen peroxide decomposition. It has been shown that the physicochemical properties of binary oxide systems can be tailored by varying the component ratio.     

Oxidation of Diethyl Sulfide in Aqueous Solutions by Peroxynitrite and the H<Subscript>2</Subscript>O<Subscript>2</Subscript>-NO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> System

It was found that nitrite anions are effective activators of hydrogen peroxide in the reaction with diethyl sulfide. The observed kinetics are consistent with the proposed intermediate formation of peroxynitrous acid (ONOOH). The rate constants for the reaction of diethyl sulfide Et₂S with the acid ONOOH (k₀ = 1.8⋅10³ L/mol⋅s) and with the anion ONOO⁻ (k₋ = 6⋅10⁻² L/mol⋅s) are respectively 10⁵ and three times higher than with hydrogen peroxide. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 5, pp. 290–295, September–October, 2005.     

Thermal decomposition of acetyl propionyl peroxide in acetone-<Emphasis Type="Italic">d</Emphasis><Subscript>6</Subscript>

The kinetics of thermolysis of acetyl propinyl peroxide in acetone-d ₆ in the temperature range 323–373 K was studied using NMR spectroscopy and the effect of chemically induced nuclear polarization. The peroxide decomposes in acetone at rates comparable with the rates of thermolysis in alcohols, yielding numerous products. In the examined temperature range, the solvent molecules act as efficient donors of deuterium atoms, forming acetylmethyl-d ₅ radicals which recombine to a significant extent with the peroxide radicals. A scheme of the processes involved in decomposition of the peroxide was suggested. The parameters of the Arrhenius equation for the peroxide decomposition were determined.Translated from Zhurnal Obshchei Khimii, Vol. 74, No. 11, 2004, pp. 1847–1854.Original Russian Text Copyright © 2004 by Skakovskii, Stankevich, Tychinskaya, Shirokii, Choban, Murashko, Rykov.This revised version was published online in April 2005 with a corrected cover date.     

The nature of the intermediate compound formed in the ZnO + H<Subscript>2</Subscript>O<Subscript>2</Subscript> reaction

The properties of the intermediate compound formed on the surface of zinc oxide and partially transferred into the gas phase in the reaction between zinc oxide and hydrogen peroxide vapor were studied. An analysis of the experimental data showed that intermediate compounds could be zinc peroxide and zinc peroxide peroxosolvate.     

The kinetics and mechanism of oxidation of isopropanol with the hydrogen peroxide-vanadate ion-pyrazine-2-carboxylic acid system

The vanadate anion in the presence of pyrazine-2-carboxylic acid (PCA) was found to effectively catalyze the oxidation of isopropanol to acetone with hydrogen peroxide. The electronic spectra of solutions and the kinetics of oxidation were studied. The conclusion was drawn that the rate-determining stage of the reaction was the decomposition of the vanadium(V) diperoxo complex with PCA, and the particle that induced the oxidation of isopropanol was the hydroxyl radical. Supposedly, the HO^· radical detached a hydrogen atom from isopropanol, and the Me₂ C^· (OH) radical formed reacted with HOO^· to produce acetone and hydrogen peroxide. The electronic spectra of solutions in isopropanol and acetonitrile and the dependences of the initial rates of isopropanol oxidation without a solvent and cyclohexane oxidation in acetonitrile on the initial concentration of hydrogen peroxide were compared. The conclusion was drawn that hydroxyl radicals appeared in the oxidation of alkanes in acetonitrile in the decomposition of the vanadium diperoxo complex rather than the monoperoxo derivative, as was suggested by us earlier.     

Thermal properties of the magnetic RuSr<Subscript>2</Subscript>GdCu<Subscript>2</Subscript>O<Subscript>8</Subscript> superconductor

Summary A thermal study was performed on the RuSr₂GdCu₂O₈ (Ru-1212) magnetic superconductor phase to investigate the effect of the annealing treatments in flowing O₂ on the stability limit of the phase and on its structural, magnetic and transport properties. DTA-TG measurements were utilized to determine the decomposition process and the dependence of the decomposition temperature on the annealing atmosphere. The decomposition of the Ru-1212 phase was found sensitive to the oxygen partial pressure and increases with P_O2 and the annealing time. The annealing treatments exert a depressing effect on the strength of the magnetic interaction, an enhancement on the superconductive properties and the vanishing of the magnetostriction. A decomposition reaction of Ru-1212 phase was proposed and discussed.     

Quantitative analysis of hydrogen peroxide by <Superscript>1</Superscript>H NMR spectroscopy

A technique utilizing ¹H NMR spectroscopy has been developed to measure the concentration of hydrogen peroxide from 10^–3 to 10 M. Hydrogen peroxide produces a peak at around 10–11 ppm, depending upon the interaction between solvent molecules and hydrogen peroxide molecules. The intensity of this peak can be monitored once every 30 s, enabling the measurement of changes in hydrogen peroxide concentration as a function of time. ¹H NMR has several advantages over other techniques: (1) applicability to a broad range of solvents, (2) ability to quantify hydrogen peroxide rapidly, and (3) ability to follow reactions forming and/or consuming hydrogen peroxide as a function of time. As an example, this analytical technique has been used to measure the concentration of hydrogen peroxide as a function of time in a study of hydrogen peroxide decomposition catalyzed by iron(III) tetrakispentafluorophenyl porphyrin.Electronic Supplementary Material Supplementary material is available for this article at     

Catalytic decomposition of H<Subscript>2</Subscript>O<Subscript>2</Subscript> in hydrophilic solvents: The kinetic aspect

Decomposition of hydrogen peroxide in organic hydrophilic solvents, catalyzed by cobalt(II) palmitate [Co(palm)₂], was studied by the method of inhibitors.     

Oxidative desulfurization of thiophene derivatives with H<Subscript>2</Subscript>O<Subscript>2</Subscript> in the presence of catalysts based on MoO<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> under mild conditions

The catalysts based on MoO₃/Al₂O₃ were synthesized and tested using aqueous hydrogen peroxide as the oxidant in the oxidative desulfurization of thiophene, benzothiophene (BT) and dibenzothiophene (DBT) into the corresponding sulfones. Among catalysts tested, 15%(MoO₃–WO₃)/Al₂O₃ prepared by a conventional impregnation method was considerably active for the oxidation of thiophene, BT and DBT, which could achieve higher than 99.2% conversions at lower reaction temperature (≤338 K). The use of hexadecyltrimethyl ammonium bromide as the phase-transfer reagent in small amounts could promote the reaction efficiently.     

Synthesis of K<Subscript>2</Subscript>[VO(O-O)<Subscript>2</Subscript>F] and solubility and bactericidal activity of its aqueous solutions

Low-expenditure method for synthesis of K₂[VO(O-O)₂F] was developed. The solubility of this compound in water and the stability of its aqueous solutions were determined and its bactericidal activity, exceeding that of hydrogen peroxide by a factor of 1.5, was analyzed.     

Hydrogen generation from H<Subscript>2</Subscript>O/H<Subscript>2</Subscript>O<Subscript>2</Subscript>/MnWO<Subscript>4</Subscript> system

Hydrogen gas as a clear energy resource was found to be largely bubbled from a H₂O/H₂O₂/MnWO₄ system. MnWO₄ powder was fabricated by an aqueous reaction method. The powder was characterized with X-ray diffraction (XRD), transmission electron microscope (TEM), and X-ray photoelectron spectrometry (XPS). The efficiency of the hydrogen generation increases with an increase in initial pH in the appropriate range, H₂O₂ proportion, MnWO₄ proportion, and intensity of light resource. Calcining at 400 °C for 1 h can make the MnWO₄ powder synthesized by an aqueous reaction more effective for H₂ generation and more stable in higher initial pH. The MnWO₄ catalyst shows a long-term stability for photocatalytic H₂ generation. A mechanism was suggested for the hydrogen generation from the H₂O/H₂O₂/MnWO₄ system together with XPS analysis.     

Physicochemical properties of KOH-H<Subscript>2</Subscript>O<Subscript>2</Subscript>-H<Subscript>2</Subscript>O solutions

Density, viscosity, and surface tension of KOH-H₂O₂-H₂O solutions used to synthesize potassium superoxide in sprayer apparatus were studied with various relative amounts of the components in the temperature range 0–30°C. Analytical dependences of the above-mentioned quantities on temperature and solvent (water) content of the system were found.     

Preparation,characterization, and thermal studies of γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> and CuO dispersed polycarbonate nanocomposites

Polycarbonate with γ-Fe₂O₃ and CuO dispersions were carried out by solvent casting method to make polycarbonate-γ-Fe₂O₃ and polycarbonate-CuO composite films. These films were characterized for the molecular structure through FTIR spectroscopy and crystallinity by X-ray diffraction (XRD) measurements. The morphology of polycarbonate-γ-Fe₂O₃ was found to be different from that of polycarbonate-CuO composite films based on the scanning electron micrograph (SEM) images. The thermal traces of composites are different from that of pure polycarbonate which indicating the catalytic decomposition when compared with virgin polymer which is oxidative decomposition. An understanding of the structure, morphology, and thermal behaviour of the composite films are envisaged in the present study.     

Kinetics of the oxidation of diethyl sulfide in the B(OH)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O<Subscript>2</Subscript>/H<Subscript>2</Subscript>O system

Data obtained for the kinetics of oxidation of diethyl sulfide (Et₂S) by hydrogen peroxide in aqueous solution catalyzed by boric acid indicate that monoperoxoborates B(O₂H)(OH) ₃ ⁻ and diperoxoborates B(O₂H)₂(OH) ₂ ⁻ are the active species. The rates of the reactions of Et₂S with B(O₂H)(OH) ₃ ⁻ and B(O₂H)₂(OH) ₂ ⁻ are 2.5 and 100 times greater than with H₂O₂. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 38–42, January–February, 2007.     

2-pyrrolidone - capped Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocrystals

Water-soluble Mn₃O₄ nanocrystals have been prepared through thermal decomposition in a high temperature boiling solvent, 2-pyrrolidone. The final product was characterized with XRD, SEM, TEM, FTIR and Zeta Potential measurements. Average crystallite size was calculated as ∼15 nm using XRD peak broadening. TEM analysis revealed spherical nanoparticles with an average diameter of 14±0.4 nm. FTIR analysis indicated that 2-pyrrolidone coordinates with the Mn₃O₄ nanocrystals only via O from the carbonyl group, thus confining their growth and protecting their surfaces from interaction with neighboring particles.