Synthesis of aluminum phosphate molecular sieves using cobalticinium hydroxide

The metal complex bis(cyclopentadienyl)cobalt(III) hydroxide, Cp₂CoOH, was found to be a template for the synthesis of AlPO₄-5 and AlPO₄-16 molecular sieves. The metal complexes are included in the molecular sieves and are not removed by solvent extraction or ion-exchange methods. The molecular sieves were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-VIS) detection and scanning electron microscopy (SEM) as well as elemental analysis.     

Competitive adsorption of organic matter with phosphate on aluminum hydroxide

The effects of orthophosphate on the adsorption of natural organic matter (NOM) on aluminum hydroxide were investigated using three organic compounds as surrogates, including humic acid (HA), phthalic acid, and 2,3-dihydroxybenzoic acid (2,3-DHBA). The adsorption of phthalic acid and 2,3-DHBA was very limited compared to that of HA, whereas their adsorption was reduced much more significantly than that of HA by phosphate. The efficiency of phosphate in reducing HA adsorption increased with increasing phosphate concentration. Phosphate adsorption was slightly reduced by phthalic acid and 2,3-DHBA but moderately suppressed by HA. The adjacent carboxylic groups mainly contributed to the adsorption of humic acid at low pH, while the adjacent phenol groups were responsible for the adsorption of humic acid at high pH. HPLC-SEC and SUVA analysis revealed that HA molecules with high molecular weight were adsorbed preferentially but were easily displaced by the specifically adsorbed phosphate. TM-AFM images revealed that the aggregation of HA molecules and the protonation of carboxylic groups at low pH facilitated the adsorption under acidic conditions. The presence of phosphate increases the coagulant dosage for NOM removal as some sites on the coagulant precipitates become utilized by phosphate.     

The reaction of phosphate with aluminum hydroxide in relation with phosphate bonding in soils

The retention of phosphate in soils is to a large extent determined by insoluble metal-oxides. In this paper, model studies are described on the uptake and release of phosphate by gibbsite (γ-Al(OH)₃). At low phosphate concentration c_p, the uptake is a pure monolayer exchange adsorption on the edge surfaces of the gibbsite platelets. At high c_p and long reaction times, a precipitate is formed on top of this adsorbate. Kinetic equations are given to discriminate between these processes.Our analysis leads to arguments in favour of applying slow-release phosphate fertilizers. In addition we analyse the effect on the precipitation of some ionic admixtures such as K⁺, Na⁺ and NH⁺₄ that may be inadvertedly or intentionally present in the soil.     

Preparation of mesoporous aluminum hydroxide and oxide in ionic liquids

Mesoporous aluminum hydroxides and oxides were synthesized using ionic liquids (ILs) as templates. The influence of various factors (the nature of the IL, pH, ultrasonication, surfactants, reagent ratio, and the nature of the aluminum precursor) on the specific surface area and pore volume was analyzed.     

氢氧化铝表面的硬脂酸改性及溶解动力学研究

抗酸类药物大都为复方制剂,目前正朝着复合消炎、成膜缓释方向发展[1].氢氧化铝作为大多数抗酸剂的基本成分,其临床药理学的研究早已完成[2,3],但有关氢氧化铝在体内和离体环境下的溶解动力学研究未见报道.研究氢氧化铝及改性氢氧化铝在类胃酸环境中的溶解动力学特征,对研发以氢氧化铝为基体或载体的复合型胃药剂型有一定理论意义.     

Green synthesis of hydrotalcite from untreated magnesium oxide and aluminum hydroxide

The influence of reaction temperature and time on the hydrothermal dissolution-precipitation synthesis of hydrotalcite was investigated. Untreated MgO, Al(OH)₃ and NaHCO₃ were used. An industrially beneficial, economically favourable, environmentally friendly, zero effluent synthesis procedure was devised based on green chemistry principles, in which the salt-rich effluent typically produced was eliminated by regenerating the sodium bicarbonate in a full recycle process. It was found that the formation of hydromagnesite dominates at low temperatures independent of reaction time. With an increase in reaction time and temperature, hydromagnesite decomposes to form magnesite. At low temperatures, the formation of hydrotalcite is limited by the solubility of the Al(OH)₃. To achieve a hydrotalcite yield of 96%, a reaction temperature of 160°C for 5?h is required. A yield higher than 99% was achieved at 180°C and 5?h reaction time, producing an layered double hydroxide with high crystallinity and homogeneity.     

Surface complexation of condensed phosphate to aluminum hydroxide: an ATR-FTIR spectroscopic investigation

Two model compounds, sodium pyrophosphate (pyro-P) and sodium tripolyphosphate (tripoly-P), were employed to elucidate the binding mechanisms of condensed phosphate on aluminum hydroxide by utilizing attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. Peak assignments for the condensed phosphates in the solution phase and those adsorbed on the surface of aluminum hydroxide were made. Electron delocalization and polarization were employed to explain the peak shifts and the complexation of condensed phosphate with aluminum hydroxide. The tripoly-P and pyro-P were adsorbed on aluminum hydroxide by forming inner-sphere complexes. The adsorbed condensed phosphates were deprotonated in the pH range from 4 to 10. Monodentate, bidentate, and binuclear complexes were formed when pyro-P was adsorbed on aluminum hydroxide, while monodentate and binuclear complexes were formed when tripoly-P was adsorbed. Based on the FTIR data, we proposed that when either bidentate or binuclear complexes were formed, the two oxygen atoms participating in the complexation with aluminum hydroxide could not be originated from the same terminal phosphate moiety. The AlO bond formed in the complexation of pyro-P or tripoly-P with aluminum hydroxide (AlPO(-3)) was not as strong as the HO bond in terminal HPO(-3). The bridging PO(-2) of tripoly-P did not coordinate with aluminum hydroxide. The real-time ATR-FTIR study on condensed phosphate adsorption revealed that a long contact time between condensed phosphates and aluminum hydroxide particles can result in a transformation of an initially formed species into a thermodynamically more stable phase.     

The selective preparation of an aluminum oxide and its isomeric C-H-activated hydroxide

An aluminum oxide [LAlO]2 (1) has been prepared by the oxidative addition of aluminum(I) monomer LAl (L = HC[(CMe)(NAr)]2, Ar = 2,6-iPr2C6H3) with molecular oxygen. The short Al-O bonds in Al2(mu-O)2 result in short Al...Al contacts and subsequent steric crowding of the Ar substituents from the two oriented L. 1 hydrolyzes to form [LAl(OH)]2(mu-O) (2). A C-H-activated aluminum hydroxide 4, an isomer of 1, however, is obtained by hydrolysis of the bulky aluminum amide 3 rather than by a conversion by high temperature treatment of 1. This indicates selective preparation of isomers 1 and 4.     

Physical and chemical properties of nano-sized aluminum hydroxide and oxide particles obtained by the electrochemical method

The structure and properties of nanoparticles of aluminum hydroxides and oxides obtained by electrochemical, chemical, and combined methods were studied by transmission electron microscopy, X-ray diffraction, thermal analysis, and atomic emission spectroscopy. The influence of synthesis conditions on the structure and morphology of nanoparticles was studied. It was shown that the effect of an electrochemical field allows monophasic systems to be obtained with a narrower range of particle sizes than in the case of chemical deposition.     

Molecular models of aluminum hydroxide

A method is presented for taking into account the boundary conditions in cluster models of crystal structures containing aluminum atoms in the octahedral oxygen environment. The method of modified neglect of diatomic overlap (MNDO) was used to calculate energy and geometric characteristics of molecular models of the elementary layer of the aluminum hydroxide crystal.Institute of Surface Chemistry, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 27, No. 4, pp. 471–473, July–August, 1991. Original article submitted October 12, 1990.     

Intercalation compounds of aluminum hydroxide

Crystalline aluminum trihydroxides Al(OH)₃ (gibbsite, baverite, and nordstrandite) can serve as layered intercalation matrices in which metal salts are arranged in a specific way. Small cations (lithium, magnesium, and transition metals) lie in the octahedral voids of aluminum hydroxide layers, and water molecules are located between the layers. This localization of small cations gives rise to the molecular sieve effect, where alkaline and alkaline earth cations (Na⁺, K⁺, Ca²⁺, etc.), which are large relative to the octahedral voids, are not intercalated into aluminum trihydroxides. In the first step of lithium salt intercalation, the cations, the anions, and the water molecules are incorporated into the interlayer space of aluminum hydroxide with subsequent transition of lithium into the voids of the layer. Translated fromZhurnal Strukturnoi Khimii, Vol. 40, No. 5, pp. 832–848, September-October, 1999.     

Coprecipitation of silica with aluminum hydroxide

Summary The reaction between aqueous solutions of aluminum nitrate and sodium silicate was studied over a wide range of concentrations and pH values. Turbidity and precipitate volume measurements allowed solubility boundaries to be determined and the conditions to be defined for the formation of stable and unstable sols. The classification of the precipitates was made in terms of their colloidal stability correlated with particle charge measurements determined by electro-osmosis. The stability domains have been compared with previous work involving the interaction of aluminum salt solutions with preformed silica sols. The results were interpreted in terms of the solubilities of silica and alumina, respectively, of their interaction as oppositely charged sols, and of the possible formation of alumino-silicates.

---

Zusammenfassung Die Reaktionen zwischen den wässerigen Lösungen von Aluminiumnitrat und Natriumsilikat wurden als Funktion von Lösungskonzentrationen und pH untersucht. Die Fällungsgrenzen sowohl wie die Stabilität der gefällten Systeme wurden durch Trübungsmessungen und Niederschlagvolumen bestimmt. Die Teilchenladungen wurden endo-osrnotisch ermittelt. Die Stabilitätsgebiete wurden mit den schon früher erhaltenen Resultaten bezüglich der Effekte von Aluminiumsalzen an Silica-Solen verglichen und in guter Übereinstimmung gefunden. Die neuen Daten wurden durch die Löslichkeit von Silica und Alumina, sowie durch die Wechselwirkungen der Sole entgegengesetzter Ladungen erklärt.

---

---

With 7 figures

---

Supported by Unilever Research Laboratory, Port Sunlight, England, and by the NSF Grant Eng. 75 08403.     

C-H-Activated aluminum hydroxide via molecular oxygen

The reaction of LAl[eta2-(C2(SiMe3)2)] (1; L = HC[(CMe)(NDipp)]2, Dipp = 2,6-iPr2C6H3) with dioxygen leads to the elimination of bis(trimethylsilyl)acetylene and the formation of the corresponding aluminum monohydroxide via the oxidation of one of the CHMe2 groups on the Dipp ring.     

Interactions of bovine serum albumin with aluminum polyoxocations and aluminum hydroxide

Interactions of aqueous solutions of aluminum polyoxocations (Al13-mers and Al30-mers) and aluminum hydroxide suspensions of varying particle sizes (26, 55, and 82 nm) with a model protein, bovine serum albumin (BSA), have been investigated using potentiometry, conductometry, viscometry, 27Al solution NMR, UV-vis spectroscopy, dynamic light scattering, zeta-potential measurements, thermogravimetry, X-ray diffraction, and scanning electron microscopy. Increasing amounts of BSA partially convert Al13-mers and, to a larger extent, Al30-mers into amorphous Al hydroxide without gel formation. At the same time, BSA molecules can form unstable aggregates in the Al polyoxocation solutions which redisperse easily upon standing. In the case of Al hydroxide sols, BSA addition causes substantial gelation, the extent of which is proportional to the amount of BSA added and inversely related to the Al hydroxide particle size. Upon freeze-drying or centrifugation of Al species-BSA solutions, an interesting sheetlike morphology with 150-200 nm wide nanoribbons is observed for pure Al hydroxide nanoparticles and for solutions of Al polyoxocations with the highest amount of BSA studied. On the basis of the combined solution, colloidal and solid-state characterization of model Al species-BSA systems, a qualitative model of possible interactions in the Al polyoxocation-BSA and Al hydroxide-BSA systems is proposed wherein core-shell hybrid nanoparticles are formed from protein "core" and Al polyoxocation "shell" or Al hydroxide "core" and protein "shell".     

Removal of 2,4-dichlorophenoxyacetic acid by calcined Zn-Al-Zr layered double hydroxide

The adsorption equilibrium, kinetics, and thermodynamics of removal of 2,4-dichlorophenoxy-acetic acid (2,4-D) from aqueous solutions by a calcined Zn-Al layered double hydroxide incorporated with Zr(4+) were studied with respect to time, temperature, pH, and initial 2,4-D concentration. Zr(4+) incorporation into the LDH was used to enhance 2,4-D uptake by creating higher positive charges and surface/layer modification of the adsorbent. The LDH was capable of removing up to 98% of 2,4-D from 5 to 400 ppm aqueous at adsorbent dosages of 500 and 5000 mg L(-1). The adsorption was described by a Langmuir-type isotherm. The percentage 2,4-D removed was directly proportional to the adsorbent dosage and was optimized with 8% Zr(4+) ion content, relative to the total metals (Zr(4+)+Al(3+)+Zn(2+)). Selected mass transfer and kinetic models were applied to the experimental data to examine uptake mechanism. The boundary layer and intra-particle diffusion played important roles in the adsorption mechanisms of 2,4-D, and the kinetics followed a pseudo-second order kinetic model with an enthalpy, ΔH(ads) of -27.7±0.9 kJ mol(-1). Regeneration studies showed a 6% reduction in 2,4-D uptake capacity over six adsorption-desorption cycles when exposed to an analyte concentration of 100 ppm.     

Colloidal magnesium aluminum hydroxide and heterocoagulation with a clay mineral. I. Properties of colloidal magnesium aluminum hydroxide

Magnesium aluminum hydroxide, the most important member of layered double hydroxides, was peptized by intense washing. The particle diameter, 70–130 nm, depended on the temperature of aging the parent material. The electrophoretic mobility of the particles decreased with increasing pH, from 3.7 × 10⁻⁸ m²/Vs at pH 5 to 0.5 × 10⁻⁸ m²/Vs at pH 12.3. An isoelectric point at pH∼7 was reached with the addition of 87 mmol/l NaSCN, 3 mmol/l Na₂SO₄ and Na₂CO₃, and 0.7 mmol/l Na₂HPO₄. The critical coagulation concentration for the 2% (w/w) dispersion was 88 mmol/l NaCl, 1.8 mmol/l Na₂CO₃, 1.4 mmol/l Na₂SO₄, and 1.2 mmol/l Na₂HPO₄ at pH∼7. The 2% dispersion at pH∼7 showed an almost Newtonian flow behavior. Yield values were developed after salt addition. The 2% dispersion reached a yield value of 2 Pa at 100 mmol/l NaCl, 3 Pa at 100 mmol/l Na₂SO₄, and 5 Pa at 100 mmol/l Na₂CO₃. Sodium phosphate in comparison with the other salts showed a liquefying effect. The yield value increased to 3 Pa at 1–10 mmol/l Na₂HPO₄ and decreased to 0.5 Pa at 100 mmol/l Na₂HPO₄. Received: 28 February 2001 Accepted: 8 March 2001     

Removal of phosphate from solution by adsorption and precipitation of calcium phosphate onto monohydrocalcite

The sorption behavior and mechanism of phosphate on monohydrocalcite (CaCO₃?H₂O: MHC) were examined using batch sorption experiments as a function of phosphate concentrations, ionic strengths, temperatures, and reaction times. The mode of PO₄ sorption is divisible into three processes depending on the phosphate loading. At low phosphate concentrations, phosphate is removed by coprecipitation of phosphate during the transformation of MHC to calcite. The sorption mode at the low-to-moderate phosphate concentrations is most likely an adsorption process because the sorption isotherm at the conditions can be fitted reasonably with the Langmuir equation. The rapid sorption kinetics at the conditions is also consistent with the adsorption reaction. The adsorption of phosphate on MHC depends strongly on ionic strength, but slightly on temperature. The maximum adsorption capacities of MHC obtained from the regression of the experimental data to the Langmuir equation are higher than those reported for stable calcium carbonate (calcite or aragonite) in any conditions. At high phosphate concentrations, the amount of sorption deviates from the Langmuir isotherm, which can fit the low-to-moderate phosphate concentrations. Speciation–saturation analyses of the reacted solutions at the conditions indicated that the solution compositions which deviate from the Langmuir equation are supersaturated with respect to a certain calcium phosphate. The obtained calcium phosphate is most likely amorphous calcium phosphate (Ca₃(PO₄)₂?xH₂O). The formation of the calcium phosphate depends strongly on ionic strength, temperature, and reaction times. The solubility of MHC is higher than calcite and aragonite because of its metastability. Therefore, the higher solubility of MHC facilitates the formation of the calcium phosphates more than with calcite and aragonite.