Alkylated polypyrazines

The syntheses of four new monomers and two new polyaromatic pyrazines are described. The monomers; bis-p,p′-(octanoyl)diphenyl ether (Ia), bis-p,p′-(hexadecanoyl)diphenyl ether (Ib), bis-p,p′-(α-bromooctanoyl)diphenyl ether (IIa), and bis-p,p′-(α-bromohexadecanoyl)diphenyl ether (IIb), were produced by Friedel-Crafts acylation of diphenyl ether with the corresponding acyl chloride and subsequent α-bromination. Prepolymers were synthesized by the condensation of (IIa) and (IIb) with ammonia in N,N-dimethylformamide (DMF), and polymers were prepared by subsequent melt condensation of the prepolymer to produce poly[2,5-(oxydiphenylene)-3,6-(dihexyl)pyrazine] (IIIa), and poly[2,5-(oxydiphenylene)-3,6-(ditetradecyl)pyrazine] (IIIb). Polymer IIIa was thermally (stable at >400°C while polymer IIIb was a tacky substance). The inherent viscosity of IIIa produced by 12 hr of melt condensation was 0.30 dl/g in formic acid. Additional heating in excess of 24 hr gave a slightly soluble polymer. The inherent viscosity of IIIb produced by 40 hr of melt condensation was 0.37 dl/g in formic acid.     

Studies on phenothiazines. Part 11. Synthesis and spectral studies of substituted 1-chloro/methyl/nitrophenothiazines

Synthesis of the title compounds by the Smiles rearrangement has been reported. 1-Nitrophenothiazines have been prepared by the reaction of 2-amino-3-chloro/methyl/methoxythiophenol with substituted o-halonitrobenzenes in ethanolic sodium hydroxide, in which Smiles rearrangement occurs in situ. 1-chloro/methyl-7-substituted phenothiazines have been prepared by Smiles rearrangement of 3-chloro/methyl-2-formamido-2′-nitro-4′-substituted diphenyl sulphides. The latter were prepared by the formylation of the diphenyl sulphides obtained by the condensation of 2-amino-3-chloro/methylthiophenols with substituted o-halogenonitrobenzenes in ethanolic sodium acetate. Spectral studies are also included.     

Dihydroxy Phenylselenonium p-Toluenesulfonate; Preparation and Use in the Recycling of Selenium Reagents

Dihydroxy phenylselenonium p-toluenesulfonate is prepared by oxidation of diphenyl diselenide with hydrogen peroxide in the presence of p-toluenesulfonic acid. The process which is carried out as a titration has been applied as the key step in a preparation of very pure diphenyl diselenide and in the recycling of benzeneseleninic acid.     

Synthesis of quinoline derivatives using ketene dithioacetals

Methyl 3-(N-arylamino)-2-cyano-3-methylthioacrylates 3a-h , which are readily prepared by the reaction of the ketene dithioacetal, methyl 2-cyano-3,3-bis(methylthio)acrylate ( 1 ) with arylamines, was heated at reflux in diphenyl ether to give the corresponding 2-methylthio-4-hydroxyquinoline-3-carbonitriles 4a-h in 14–77% yields. The reaction of 1 with excess aryl amines in diphenyl ether at reflux gave also the corresponding 2-arylamino-4-hydroxyquinoline-3-carbonitriles 6a-d . The 2-methylthioquinoline-3-carbonitriles 4a-h , thus obtained, are useful intermediates for the synthesis of various quinoline derivatives.     

Synthesis and Characterization of Polyesterimides Containing Ether Linkages

Abstract

Three novel dicarboxylic acids, bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl sulfone, bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl methane, and bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl ether, were synthesized, and several polyesterimides were prepared from diacid chlorides and bisphenols by solution polycondensation. The polymers were obtained in 65–88% yield and had inherent viscosities in the 0.18 to 0.64 dL/g range. The polymers were characterized by IR, elemental analysis, x-ray, TGA, DSC, and solubility tests. All the polymers were readily soluble in polar aprotic solvents and had a 10% weight loss temperature above 375°C in nitrogen.     

Synthesis of poly(aryl ether ketone)s containing diphenyl moieties by electrophilic Friedel–Crafts solution polycondensation

A new monomer, 4,4′‐bis(4‐phenoxybenzoyl)diphenyl (BPOBDP), was prepared by Friedel–Crafts reaction of 4‐bromobenzoyl chloride and diphenyl, followed by condensation with potassium phenoxide. Novel poly(ether ketone ketone) (PEKK)/poly(ether ketone diphenyl ketone ether ketone ketone) (PEKDKEKK) copolymers were synthesized by electrophilic Friedel–Crafts solution copolycondensation of isophthaloyl chloride (IPC) with a mixture of diphenyl ether (DPE) and BPOBDP, in the presence of anhydrous aluminum chloride and N‐methyl‐pyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The copolymers obtained were characterized by various analytical techniques such as FT‐IR, DSC, TGA, and wide‐angle X‐ray diffraction (WAXD). The results showed that the resulting copolymers exhibited excellent thermal stability due to the existence of diphenyl moieties in the main chain. The glass transition temperatures are above 152°C, the melting temperatures are above 276°C, and the temperatures at a 5% weight loss are above 548°C in nitrogen. The copolymers with 50–70 mol% BPOBDP had tensile strengths of 101.5–102.7 MPa, Young's moduli of 3.23–3.41 GPa, and elongations at break of 12–17%. All these copolymers were semicrystalline and insoluble in organic solvents. Copyright © 2008 John Wiley & Sons, Ltd.     

Comparative study on polyimides from isomeric 3,3′‐, 3,4′‐, and 4,4′‐linked bis(thioether anhydride)s

Three isomeric bis(thioether anhydride) monomers, 4,4′‐bis(2,3‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,3′‐PTPKDA), 4,4′‐bis(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (4,4′‐PTPKDA), and 4‐(2,3‐dicarboxyphenylthio)‐4′‐(3,4‐dicarboxyphenylthio) diphenyl ketone dianhydride (3,4′‐PTPKDA), were prepared through multistep reactions. Their structures were determined via Fourier transform infrared, NMR, and elemental analysis. Three series of polyimides (PIs) were prepared from the obtained isomeric dianhydrides and aromatic diamines in N‐methyl‐2‐pyrrolidone (NMP) via the conventional two‐step method. The PIs showed excellent solubility in common organic solvents such as chloroform, N,N‐dimethylacetamide, and NMP. Their glass‐transition temperatures decreased according to the order of PIs on the basis of 3,3′‐PTPKDA, 3,4′‐PTPKDA, and 4,4′‐PTPKDA. The 5% weight loss temperatures (T_5%) of all PIs in nitrogen were observed at 504–519 °C. The rheological properties of isomeric PI resins based on 3,3′‐PTPKDA/4,4′‐oxydianiline/phthalic anhydride showed lower complex viscosity and better melt stability compared with the corresponding isomers from 4,4′‐ and 3,4′‐PTPKDA. In addition, the PI films based on three isomeric dianhydrides and 2,2′‐bis(trifluoromethyl)benzidine had a low moisture absorption of 0.27–0.35%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polyaromatic ether-ketone-sulfones containing 1,3-butadiene units

The acid chloride of 1,4-bis-p-carboxyphenyl-1,3-butadiene (XI) and isophthaloyl chloride (XIV) were polymerized with 4,4′-diphenoxy-diphenyl sulfone (XII) and diphenyl ether (XIII) in a Friedel-Crafts type of polymerization. The polymers obtained, which contained 5–20 mole % of butadiene units, were insoluble in all solvents. The polyamides prepared from the acid chloride of 1,4-bis-p-carboxyphenyl-1,3-butadiene (XI) and aromatic diamines were also insoluble in all solvents.     

Synthesis of copolymers of poly(ether sulfone ether ketone ketone) and poly(ether ketone diphenyl ketone ether ketone ketone) by electrophilic Friedel–Crafts solution polycondensation

A new monomer, 4,4′‐bis(4‐phenoxybenzoyl)diphenyl(BPOBDP), was synthesized via a two‐step synthetic procedure. A series of novel poly(ether sulfone ether ketone ketone)/poly(ether ketone diphenyl ketone ether ketone ketone) copolymers were prepared by electrophilic Friedel–Crafts solution copolycondensation of isophthaloyl chloride (IPC) with a mixture of 4,4′‐diphenoxydiphenylsulfone (DPODPS) and 4,4′‐bis(4‐phenoxybenzoyl)diphenyl (BPOBDP), in the presence of anhydrous aluminum chloride and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The copolymers with 10–50 mol% DPODPS are semicrystalline and have remarkably increased T_gs over commercially available PEEK and PEKK. The copolymers with 40–50 mol% DPODPS had not only high T_gs of 170–172°C, but also moderate T_ms of 326–333°C, which are extremely suitable for melt processing. These copolymers have tensile strengths of 96.5–108.1 MPa, Young's moduli of 1.98–3.05 GPa, and elongations at break of 13–26% and exhibit excellent thermal stability and good resistance to acidity, alkali, and common organic solvents. Copyright © 2009 John Wiley & Sons, Ltd.     

Studies on reactions of the N-phosphonium salts of pyridines. XIII. Direct polycondensation reaction of carbon dioxide or disulfide with diamines under mild conditions

Polyureas of high molecular weight were obtained by the direct polycondensation reaction of carbon dioxide with diamines at 40°C for several hours under a pressure of carbon dioxide (below 30 atm) by use of diphenyl phosphite in pyridine. Optimal temperature and pressure were 40°C and 20 atm of carbon dioxide. The polycondensation reaction was also affected by solvents and type and amounts of tertiary amines. Pyridine was most effective as tertiary amine and solvent as well. Of the phosphorous compounds used, triaryl phosphites and diphenyl phosphite were most effective, but trialkyl phosphites failed to give polymer. The reaction was assumed to proceed via a carbamyl N-phosphonium salt of pyridine formed by dephenoxylation of phosphites. Similarly, polythioureas were prepared by heating a mixture of carbon disulfide, diamines, and diphenyl phosphite in pyridine at 40°C for 6 hr under nitrogen.     

Retro-ene reactions in heterocyclic synthesis. IV. A new synthetic method for 6-hydroxypyrimidin-4(3H)-ones and 1,3,5-triazine-2,4(1H,3H)-diones

N-t-Butylbenzamidines 1 reacted with diphenyl phenylmalonate or diphenyl methylmalonate to give 6-hydroxypyrimidin-4(3H)-ones 4 or 5. Amidines 1 on reaction with diphenyl imidodicarboxylate afforded 1,3,5-triazine-2,4(1H, 3H)-diones 8.     

Polymer design for thermally stable polyimides with low dielectric constant

We successfully prepared a series of thermally stable polyimides (PIs) with low dielectric constant (k) by introducing bulky diphenyl fluorenylidene moieties in backbone. The lowest k was found to be 2.77 among non-fluorinated PIs and 2.35 among fluorinated ones. In order to prove the lowest limit of k in PIs, we prepared soluble and thermally stable polyarylenes (PArs) without polar imide linkage with the same aromatic moieties by coupling polymerization. The lowest k was 2.7 without fluorine (F) and 2.2 with F atom, which showed also promising for low k materials. From these results, PIs we prepared were estimated to the lowest k values among PIs. On the basis of statistics on these results, we could express contour lines of k as a function of imide concentration and F content with high correlation factor (r= 0.96) in PIs and PArs.     

Synthesis and characterization of novel soluble triphenylamine‐containing aromatic polyamides based on N,N′‐bis(4‐aminophenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine, N, N′‐bis(4‐aminophenyl)‐N, N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluoronitrobenzene, followed by catalytic reduction. A series of novel aromatic polyamides with triphenylamine units were prepared from the diamine and various aromatic dicarboxylic acids or their diacid chlorides via the direct phosphorylation polycondensation or low‐temperature solution polycondensation. All the polyamides were amorphous and readily soluble in many organic solvents such as N, N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass‐transition temperatures (257–287 °C), 10% weight‐loss temperatures in excess of 550 °C, and char yields at 800 °C in nitrogen higher than 72%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2810–2818, 2002     

Synthesis and properties of new soluble aromatic polyamides and polyimides on the basis of N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new N‐phenylated amide (N‐phenylamide) unit containing aromatic diamine, N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 3‐nitrobenzoyl chloride, followed by catalytic reduction. Two series of organosoluble aromatic poly(N‐phenylamide‐imide)s and poly(N‐phenylamide‐amide)s with inherent viscosities of 0.58–0.82 and 0.56–1.21 dL/g were prepared by a conventional two‐stage method and the direct phosphorylation polycondensation, respectively, from the diamine with various aromatic dianhydrides and aromatic dicarboxylic acids. All polyimides and polyamides are amorphous and readily soluble in many organic solvents such as N,N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with high tensile strengths. These polyimides and polyamides had glass‐transition temperatures in the ranges of 230–258 and 196–229 °C, respectively. Decomposition temperatures of the polyimides for 10% weight loss all occurred above 500 °C in both nitrogen and air atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2564–2574, 2002     

Effect of the coupling agent's reactivity on the shrinkability of the blends consisting of grafted low‐density polyethylene and ethylene acrylic elastomer

Blends prepared by melt mixing of thermoplastic elastomer have gained considerable attention in recent years from a heat shrinkability point of view. Our present study deals with the measurement of heat shrinkability of the maleic anhydride grafted low‐density polyethylene and ethylene acrylic elastomer. Two samples have been prepared to study the effect of coupling agent's reactivity on the shrinkability of the blends. The coupling agents used are 4,4′‐diamino diphenyl sulphone, and 4,4′‐diamino diphenyl methane. Shrinkability was measured at room temperature, 120 °C, 150 °C, and 180 °C. Shrinkability is found to be greater in high temperature stretched sample rather than that of room temperature stretched sample. It is observed that reactivity as well as heat shrinkability is more when 4,4′‐diamino diphenyl methane is used as a coupling agent. The mechanism of interchain crosslinking reaction has been confirmed by IR spectroscopy. Differential scanning calorimetry was performed to study the thermal stability of the sample. Copyright © 2002 John Wiley & Sons, Ltd.     

Copoly(Aryl Ether)s Containing 1,10‐Phenanthroline Moieties

Abstract

Poly(aryl ether)s were synthesized by reaction of 4,7‐dichloro‐3,8‐diphenyl‐1,10‐phenanthroline and 4,7‐dichloro‐2,9‐dimethyl‐1,10‐phenanthroline with bisphenol A (BPA) in the presence of potassium carbonate in N,N‐dimethylacetamide or N‐methylpyrrolidinone. High molecular weight homopolymers could not be prepared because of the insolubility of the polymers resulting in premature precipitation from the reaction mixture. Soluble, high molecular weight copolymers were readily prepared containing up to 70 mol% of the 1,10‐phenanthroline moieties. The copolymers were all highly fluorescent with blue emission.     

Synthesis of a pyrrolo annulated pyrido[2,3-D]pyrimidine as a potential nonclassical antifolate

Cyclocondensation of 2,4,6-triaminopyrimidine ( 4 ) with ethyl N-benzyl-4-oxo-3-pyrrolidine carboxylate ( 5 ) in diphenyl ether regiospecifically afforded a new tricyclic, angular 1,3,8-trisubstituted pyrrolo[3′,4′:4,5]-pyrido[2,3-d]pyrimidine-6-one 1 in excellent yield. The ketoester 5 was prepared by a literature method. Compound 1 in addition to being a new heterocyclic system is an important key precursor to a variety of classical and nonclassical tricyclic, 5-deaza analogues of the folate cofactor 5,10-methylenetetrahydrofolate 3 .     

Palladium(II) complexes of (t-butyl salicylidene) diphenyl disulfide diamine: synthesis,structure, spectral characterization and catalytic properties

The hexadentate N₂S₂O₂ donor ligand N,N’-bis(3,5-tert-butylsalicylidene) diphenyl disulfide-2,2’-diamine was synthesised by the condensation of 2-aminophenyl disulfide and 3,5-di-tert-butyl-2-hydroxybenzaldehyde and its molecular structure was confirmed by X-ray studies. One of the tert-butyl groups in the Schiff base has rotational disorder around the C–C bond with ratio 0.56:0.44. The palladium complexes were prepared by the direct reaction of PdCl₂(CH₃CN)₂ and Schiff base ligands N,N’-bis (5-tert-butylsalicylidene) diphenyl disulfide-2,2’-diamine and N,N’-bis(3,5-tert-butylsalicylidene) diphenyl disulfide-2,2’-diamine, respectively. The structure of the metal complexes was characterized by physico-chemical and spectroscopic methods. Palladium is in square-planar geometry bonded to imine nitrogen and phenolic O in both the complexes. The catalytic efficiency of the palladium complexes was evaluated in the cross-coupling reactions; Heck-Mizoroki reaction of iodobenzene and methyl acrylate and the Suzuki-Miyaura reaction of phenylboronic acid and iodobenzene, which gave low to moderate yields. Higher conversions were obtained for 2a as catalyst due to the increase in the number of bulky tertiary butyl groups in the structure.

     

Use of N‐methyliminodiacetic acid boronate esters in suzuki‐miyaura cross‐coupling polymerizations of triarylamine and fluorene monomers

Polytriarylamine copolymers can be prepared by Suzuki‐Miyaura cross‐coupling reactions of bis N‐methyliminodiacetic acid (MIDA) boronate ester substituted arylamines with dibromo arenes. The roles of solvent composition, temperature, reaction time, and co‐monomer structure were examined and (co)polymers prepared containing 9, 9‐dioctylfluorene (F8), 4‐sec‐butyl or 4‐octylphenyl diphenyl amine (TFB), and N, N′‐bis(4‐octylphenyl)‐N, N′‐diphenyl phenylenediamine (PTB) units, using a Pd(OAc)₂/2‐dicyclohexylphosphino‐2′,6′‐dimethoxybiphenyl (SPhos) catalyst system. The performance of a di‐functionalized MIDA boronate ester monomer was compared with that of an equivalent pinacol boronate ester. Higher molar mass polymers were produced from reactions starting with a difunctionalized pinacol boronate ester monomer than the equivalent difunctionalized MIDA boronate ester monomer in biphase solvent mixtures (toluene/dioxane/water). Matrix‐assisted laser desorption/ionization mass spectroscopic analysis revealed that polymeric structures rich in residues associated with the starting MIDA monomer were present, suggesting that homo‐coupling of the boronate ester must be occurring to the detriment of cross‐coupling in the step‐growth polymerization. However, when comparable reactions of the two boronate monomers with a dibromo fluorene monomer were completed in a single phase solvent mixture (dioxane + water), high molar mass polymers with relatively narrow distribution ranges were obtained after only 4 h of reaction. © 2017 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2798–2806     

Polyquinazolotriazoles

A novel high molecular weight (η_inh = 1.4 dl/g) polyquinazolotriazole (PQT) was prepared from the reaction of 3,3′-(2″,6″-pyridinediyl)bis[5-(o-aminophenyl)-1,2,4-triazole] with isophthalic acid by solution cyclopolycondensation in polyphosphoric acid, with diphenyl isophthalate by melt polycondensation, and with isophthaloyl chloride to form a precursor polyamide which subsequently underway cyclodehydration. Thermal characterization of the PQT by thermogravimetric analysis showed initial weight loss in air commencing at ～490°C. The PQT exhibited a weight loss of only 4% after aging in static air for 200 hr at 316°C and a T_g of 342°C as measured by differential scanning calorimetry. Prior to polymer synthesis, a series of model compounds was prepared as a guide to polymer synthesis and identification.