N,N-diethyl-N'-benzoylthiourea--a new spectrophotometric reagent for rhenium determination

The reagent N,N-diethyl-N'-benzoylthiourea produces a green complex with rhenium in hydrochloric acid medium in the presence of tin(II) chloride. The complex extracted into toluene shows an absorption maximum at 383 nm, obeys Beer's law from 1.5 to 22 micrograms ml-1 of rhenium while its molar absorptivity and Sandell sensitivity are 6.66 x 10(3) L mol-1 cm-1 and 0.028 microgram cm-2, respectively. It tolerates the presence of a large number of ions, including Mo(VI), W(VI) and some platinum metals. Job's and the mole ratio methods indicate that the rhenium metal and the chelating agent ratio of 1:2 in solution. The system has been applied to the determination of rhenium on synthetic samples and alumina based catalysts.     

Tungstophosphoric acid as a new reagent for the spectrophotometric determination of phenothiazines

A simple and rapid spectrophotometric method for the determination of phenothiazines based on the formation of a colored compound between tungstophosphoric acid and phenothiazines is described. The proposed method is successfully employed for the determination of phenothiazine drugs in various pharmaceutical products.     

The spectrophotometric determination of rhenium

Some 50 analytical reagents were briefly checked for use in the spectrophotometric determination of rhenium. Seven reagents were checked in detail and interferences were examined. The most promising reagents appeared to be I-phenyl-2-thiourea and I,5-diphcnylcarbohydrazide.     

The effect of barbituric acid concentration in the spectrophotometric determination of cyanide and thiocyanate by the pyridine-barbituric acid method

Summary The König reaction forms the basis of many analytical methods including those for the determination of chlorine, nicotinic acid, thiocyanate and cyanide. The colorimetric methods have, however, been plagued with various problems such as the use of hazardous, often carcinogenic compounds, and the instability of the final color formed as well as of the color reagent itself.Using a mixture of pyridine, hydrochloric acid and barbituric acid as the color reagent, the present study shows the effect of barbituric acid concentration on the intensity and stability of the color complex. The problems associated with the use of barbituric acid can be attributed mainly to the high concentration used by previous workers. A color reagent containing about 0.1% (w/v) barbituric acid shows marked improvements in color intensity and stability as well as reagent stability.     

Validation of a new method for spectrophotometric determination of polyethylenimine

A new method of determination of polyethylenimine (PEI) is presented. The method is fast, reliable, and easy to perform. It is based on a creation of a complex between Cu²⁺ and PEI and its absorption in UV–VIS spectrum. The complex has a distinct absorption peak in UV part of electromagnetic spectrum and the measurement is optimal at 285 nm. A method is thoroughly analyzed in various concentrations of both PEI and Cu²⁺, temperatures, times of creation of a complex, ionic strengths, background electrolytes types, and pH values. Analytical parameters of the presented method such as linearity, sensitivity, limit of detection (LOD), limit of quantification (LOQ), repeatability, and intermediate precision were also determined.     

A new spectrophotometric method for the determination of nadolol

A new spectrophotometric method has been developed for the assay of nadolol in pure form and in tablets. The assay procedure is based on a derivatization methodology employing 4-carboxyl-2,6-dinitrobenzene diazonium ion (CDNBD) as a diazo coupling reagent. The azo dye formed between nadolol and CDNBD absorbed visible light at the wavelength maximum of 416 nm (λ_max) demonstrating a bathochromic shift from the absorption maximum of nadolol. Optimization studies established an optimal reaction time of 10 min at 60 °C. The assays were linear over 1.25–10 μg ml^?1 of nadolol, and the reaction occurred by a 3:1 reagent/drug stoichiometric ratio. The method is found to be selective and has a lower detection limit of 0.29 μg ml^?1. Recovery studies over three days gave mean recovery of 101.4% (RSD 3.0%). This new method has been successfully applied in the determination of nadolol and nadolol/bendroflumethiazide tablets with accuracy and precision similar to the official (USP) HPLC procedure (p > 0.05). The new procedure has the advantages of high sensitivity, lower limit of detection and could find application as an in-process quality control method for nadolol.     

Kinetic spectrophotometric method for trace determination of thiocyanate based on its inhibitory effect

A kinetic spectrophotometric method for the determination of thiocyanate, based on its inhibitory effect on silver(I) catalyzed substitution of cyanide ion, by phenylhydrazine in hexacyanoferrate(II) is described. Thiocyanate ions form strong complexes with silver(I) catalyst which is used as the basis for its determination at trace level. The progress of reaction was monitored, spectrophotometrically, at 488 nm (λ_max of [Fe(CN)₅PhNHNH₂]^3?, complex) under the optimum reaction conditions at: 2.5 × 10^?3 M [Fe(CN)₆]^4?, 1.0 × 10^?3 M [PhNHNH₂], 8.0 × 10^?7 M [Ag⁺], pH 2.8 ± 0.02, ionic strength (μ) 0.02 M (KNO₃) and temperature 30 ± 0.1 °C. A linear relationship obtained between absorbance (measured at 488 nm at different times) and inhibitor concentration, under specified conditions, has been used for the determination of [thiocyanate] in the range of 0.8–8.0 × 10^?8 M with a detection limit of 2 × 10^?9 M. The standard deviation and percentage error have been calculated and reported with each datum. A most plausible mechanistic scheme has been proposed for the reaction. The values of equilibrium constants for complex formation between catalyst–inhibitor (K_CI), catalyst–substrate (K_s) and Michaelis–Menten constant (K_m) have been computed from the kinetic data. The influence of possible interference by major cations and anions on the determination of thiocyanate and their limits has been investigated.     

Guaiacol as a new reagent for the spectrophotometric determination of uranium

Guiacol, i.e. o-hydroxyanisole, gives a distinct color reaction with U(VI) suitable for spectrophotometric determination of the metal. The complex formed in the reaction has an absorption maximum at 352 nm. Optimum pH for the color development ranges from 6.5 to 8.5. The molar absorptivity and Sandell's sensitivity of the method were found to be 3.75×10³ l·mol^–1·cm^–1 and 0.063 g·cm^–2, respectively. Many anions and cations do not interfere up to 100 ppm. The method has been made very specific by selective extraction of U(VI) with TBP from a mixture of different cations and anions in the presence of 60% NH₄NO₃ as salting out agent followed by developing the color in the non-aqueous phase by adding quaiacol in methanol at pH 6.5 to 8.5 An amount as low as 30 g of uranium (VI) per 10 ml of the solution could be satisfactorily determined with an RSD of ±2.0%. The method was applied to rock samples after U(VI) had been extracted from a sample solution into 25% TBP in hexane. Results obtained by the new method compare very well with those of conventional fluorimetric and radiometric assays. The features of the method include excellent precision, rapidity, good selectivity, and ease of performance.     

A new spectrophotometric method for the micro determination of sulfuric acid esters in sulfatide fractions

Summary A new micro method has been developed for measuring sulfatide fractions. Sulfuric acid ester absorption is measured at 8.02 m () by infrared spectrophotometry, compared with that of a standard sulfatide, and corrected for phosphorus. General problems in measuring sulfatides are noted; procedural details, control studies, advantages, and limitations of the present method are discussed.

---

Zusammenfassung Eine neue Mikromethode für die Bestimmung von Sulfatidfraktionen wird beschrieben. Die Absorption der Schwefelsäureester wird im Infrarot bei 8,02 m gemessen, mit jener eines Sulfatidstandards verglichen und für Phosphor korrigiert. Allgemeine, mit der Bestimmung von Sulfatiden verbundene Probleme werden erwähnt; technische Einzelheiten, Kontroll-untersuchungen, Vorteile und Grenzen der beschriebenen Methode werden besprochen.

---

Résumé Mise au point d'une nouvelle microméthode pour la détermination de fractions de sulfatides. L'absorption de l'ester sulfurique est mesurée à 8,02 m () par spectrophotométrie infra-rouge et comparée avec celle d'un sulfate standard puis corrigée du fait de la présence du phosphore. Les auteurs rappellent les problèmes généraux rencontrés dans la détermination des sulfatides. Les détails opératoires, les études de contrôle, les avantages et les limitations de la présente méthode sont d'autre part discutés.

     

Effects of γ-radiation on spectrophotometric determination of uranium as thiocyanate

The effects of γ-radiation on the spectrophotometric determination of uranium as the thiocyanate complex in water and acetone-water solutions have been studied. When tin(II) chloride is present, the absorbance of uranium thiocyanate in aqueous solution decreases with increasing radiation dose until the appcarance of radiolytic elemental sulfur causes an apparent increase. In the absence of tin(II) chloride, the turbidity caused by radiolytic sulfur causes an increase in absorbance over the whole dose range studied. In acetone-water solution, similar but much more severe effects occur. Observations of radiation effects of some of the individual reagents used in the spectrophotometric determinations are included, as well as indications of the errors caused by specific radiation doses.     

动力学抑制光度法测定氨三乙酸

氨三乙酸在分析化学中常作为配位滴定剂和掩蔽剂,在催化动力学分析中常作为活化剂。常量的氨三乙酸的测定已有工业化方法,微量氨三乙酸的测定方法极少。酸性和沸水浴条件下,微量的氨三乙酸对高碘酸钾氧化偶氮胭脂红B褪色的反应具有显著的抑制作用,据此建立     

Isophthaldihydroxamic acid as a spectrophotometric reagent for the determination of molybdate ion

Isophthaldihydroxamic acid produces colored solutions with molybdate ions in basic medium. The resultant product is extracted into a toluenic solution of trioctylmethylammonium chloride (Adogen). The yellow color obtained in the organic solvent (molar absorptivity 6.050 liters · mol⁻¹ · cm⁻¹ at a wavelength of 350 nm) has been used for the spectrophotometric determination of molybdenum in the range of 1.3 to 6 ppm with a relative error of the mean value of 1.3%.     

A revised method for the spectrophotometric determination of glyoxylic acid

The spectrophotometric determination of glyoxylic acid at 520 nm based on formation of the 1,5-diphenyl formazan derivative is revised. The colour can be developed at room temperature if the acid or its sodium salt is pure. The molar absorptivity is improved to 32 250 l mol^?1 cm^?1. The differences from the earlier procedures are discussed.     

A new spectrophotometric method for the determination of formaldehyde in air

A new spectrophotometric method for the determination of formaldehyde is described, based on a colour reaction with oxalyidihydrazide and copper(II). The optimum reaction conditions, and other analytical parameters such as interferences, Beer's law, sensitivity, collection efficiency, etc. have been studied.