Green photoluminescence from platinum(II) complexes bearing silylacetylide ligands

The synthesis, structural characterization, photoluminescence properties, and density functional theory analysis of three Pt(II) diimine complexes, Pt(dbbpy)(C triple bond CR)2 [dbbpy = 4,4'-di(tert-butyl-2,2'-bipyridine; R = -SiMe3, -CC-SiMe3, or -t-Bu], are presented. The Pt(dbbpy)(C triple bond C-tBu)2 complex serves as a carbon-based ligand structure for which the photophysical properties of the two silicon-bearing complexes are compared in dichloromethane. Pt(dbbpy)(C triple bond C-SiMe3)2 and Pt(dbbpy)(C triple bond C-C triple bond C-SiMe3)2 display visible absorptions with strong green emission (lambda(emmax) = 526 and 524 nm, respectively) while Pt(dbbpy)(C triple bond C-t-Bu)2 displays efficient, long-lived yellow emission (lambda(emmax) = 557 nm). Direct side by side comparisons of Pt(dbbpy)(C triple bond C-SiMe3)2 and Pt(dbbpy)(C triple bond C-t-Bu)2 suggest that the difference in excited state energy results from the relative sigma-donor strength of the acetylide ligands.     

Syntheses and structural characterization of luminescent platinum(II) complexes containing di-tert-butylbipyridine and new 1,1-dithiolate ligands

Three new di-tert-butylbipyridine (dbbpy) complexes of platinum(II) (1-3) containing 1,1-dithiolate ligands have been synthesized and characterized. The 1,1-dithiolates are 2,2-diacetylethylene-1,1-dithiolate (S(2)C=C(C(O)Me)2) (1), 2-cyano-2-p-bromophenylethylene-1,1-dithiolate (S(2)C=C(CN)(p-C(6)H(4)Br)) (2), and p-bromophenyl-2-cyano-3,3-dithiolatoacrylate (S(2)C=C(CN)(COO-p-C(6)H(4)Br)) (3). Complex 1 exhibits a solvatochromic charge-transfer absorption in the 430-488 nm region of the spectrum and a luminescence around 635 nm in ambient temperature CH(2)Cl(2) solution. These observations are consistent with what has been seen previously in related Pt diimine 1,1-dithiolate complexes. The nature of the emissive state is assigned as a (3)(mixed metal/dithiolate-to-diimine) charge transfer, while the solvatochromic absorption band corresponds to the singlet transition of similar orbital character. The other complexes also exhibit a low-energy solvatochromic absorption. The crystal structures of two of the complexes have been determined, representing the first time that Pt(diimine)(1,1-dithiolate) complexes have been crystallographically studied. The structures confirm the expected square planar coordination geometry with distortions in bond angles dictated by the constraints of the chelating ligands. The Pt-S and Pt-N bond lengths and S-Pt-S and N-Pt-N bond angles for the two structures are identical within experimental error (2.283(2) and 2.278(2) A; 2.053(6) and 2.050(8) A; 75.01(8) degrees and 75.40(8) degrees; 79.2(2) degrees and 79.0(2) degrees, respectively). Crystal data for 1: monoclinic, space group P2(1)/n (No. 14), with a = 7.20480(10) A, b = 20.53880(10) A, c = 19.1072(2) A, beta = 93.83 degrees, V = A(3), Z = 4, R1 = 3.34% (I > 2sigma(I)), wR2 = 9.88% (I > 2sigma(I)) for 3922 unique reflections. Crystal data for 2: monoclinic, space group P2(1)/n (No. 14), with a = 15.0940(5) A, b = 9.5182(3) A, c = 20.4772(7) A, beta = 111.151(1) degrees, V = A(3), Z = 4, R1 = 4.07% (I > 2sigma(I)), wR2 = 8.64% (I > 2sigma(I)) for 3859 unique reflections.     

Syntheses, structures, and electrochemical properties of platinum(II) complexes containing di-tert-butylbipyridine and crown ether annelated dithiolate ligands

A series of new platinum(II) complexes containing both 4,4'-di-tert-butyl-2,2'-bipyridine (dbbpy) and the extended tetrathiafulvalenedithiolate ligands have been prepared and characterized. These complexes include [Pt(dbbpy)(C8H4S8)] (1; C8H4S82- = 2-{(4,5-ethylenedithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(ptdt)] (2; ptdt = 2-{(4,5-cyclopentodithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(mtdt)] (3; mtdt = 2-{(4,5-methylethylenedithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(btdt)] (4; btdt = benzotetrathiafulvalenedithiolate), [Pt(dbbpy)(C8H6S8)] (5; C8H6S82- = 2-{4,5-bis(methylthio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(3O-C6S8)] (6; 3O-C6S82- = 2-{4,5-dithia-(3',6',9'-trioxaundecyl)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), and [Pt(dbbpy)(4O-C6S8)] (7; 4O-C6S82- = 2-{4,5-dithia-(3',6',9',12'-tetraoxatetradecyl)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate). The crystal structures of a new ligand precursor (2-[4,5-dithia-(3',6',9',12'-tetraoxatetradecyl)-1,3-dithiol-2-ylidene]-4,5-bis(2-cyanoethylsulfanyl)-1,3-dithiole, IIIc) and complexes 5-7 have been determined by X-ray crystallography. Complexes 1-7 show intense electronic absorption bands in the UV-vis region due to the intramolecular mixed metal/ligand-to-ligand charge-transfer transition, and they display significant solvatochromic behavior. Redox properties of these compounds have been investigated by cyclic voltammetry, and complex 7 shows a significant response for Na+ ions with a large positive shift of ca. 45 mV.     

Synthesis and characterization of platinum diimine bis(acetylide) complexes containing easily derivatizable aryl acetylide ligands

New Pt(II) diimine bis(acetylide) complexes where the diimine is a substituted bipyridine or phenanthroline and the arylacetylide is 4-ethynylbenzaldehyde have been prepared in good to excellent yields. Spectroscopic characterization supports a square planar coordination geometry with cis-alkynyl ligands, and the crystal structure of one of the complexes, Pt(phen)(Ctbd1;CC(6)H(4)CHO)(2) (1), confirms the assignment. The new diimine bis(acetylide) complexes exhibit an absorption band ca. 400 nm that corresponds to a Pt(d) --> pi diimine charge transfer transition and are brightly emissive in fluid solution, with excited state lifetimes in the range 100-800 ns. Correlation of diimine substituent with lambda(max) for the 400 nm absorption band gives strong support to the MLCT assignment. Complex 1 undergoes electron transfer quenching, showing good Stern-Volmer behavior with a variety of oxidative and reductive quenchers. Quenching studies conducted with DNA nucleosides (A, T, C, G) were also investigated. Silyl-protected adenosine and guanosine were found to quench the luminescence of 1 better than similarly protected cytidine or thymidine. Since the former are the more easily oxidized bases, the results suggest that the Pt(II) diimine bis(acetylide) complexes are more powerful photooxidants than photoreductants with regard to electron transfer to DNA bases.     

Syntheses, characterization, and luminescence of Pt II-M I (M = Cu, Ag, Au) heterometallic complexes by incorporating Pt(diimine)(dithiolate) with [M2(dppm)2]2+ (dppm = Bis(diphenylphosphino)methane)

Reaction of Pt(diimine)(edt) (edt = 1,2-ethanedithiolate) with M(2)(dppm)(2)(MeCN)(2)(2+) (dppm = bis(diphenylphosphino)methane) gave heterotrinuclear complexes [PtCu(2)(edt)(mu-SH)(dppm)(3)](ClO(4)) (11) and [PtCu(2)(diimine)(2)(edt)(dppm)(2)](ClO(4))(2) (diimine = 2,2'-bpyridine (bpy), 12; 4,4'-dibutyl-2,2'-bipyridine (dbbpy), 13; phenanthroline (phen), 14; 5-bromophenanthroline (brphen), 15) when M = Cu(I). The reaction, however, afforded tetra- and trinuclear complexes [Pt(2)Ag(2)(edt)(2)(dppm)(2)](SbF(6))(2) (17) and [PtAu(2)(edt)(dppm)(2)](SbF(6))(2) (21) when M = Ag(I) and Au(I), respectively. The complexes were characterized by elemental analyses, electrospray mass spectroscopy, (1)H and (31)P NMR, IR, and UV-vis spectrometry, and X-ray crystallography for 14, 17, and 18. The Pt(II)Cu(I)(2) heterotrinuclear complexes 11-15 exhibit photoluminescence in the solid states at 298 K and in the frozen acetonitrile glasses at 77 K. It is likely that the emission originates from a ligand-to-metal charge transfer (dithiolate-to-Pt) (3)[p(S) --> d(Pt)] transition for 11 and from an admixture of (3)[d(Cu)/p(S)-pi(diimine)] transitions for 12-16. The Pt(II)(2)Ag(I)(2) heterotetranuclear complexes 17 and 18 are nonemissive in the solid states and in solutions at 298 K but show photoluminescence at 77 K. The Pt(II)Au(I)(2) heterotrinuclear complexes 19-21, however, are luminescent at room temperature in the solid state and in solution. Compounds 19 and 20 afford negative solvatochromism associated with a charge transfer from an orbital of a mixed metal/dithiolate character to a diimine pi orbital.     

Synthesis, structure, and luminescence of di- and trinuclear palladium/gold and platinum/gold complexes with (2,7-di-tert-butylfluoren-9-ylidene)methanedithiolate

Acetone solutions of [Au(OClO3)(PCy3)] react with complexes [M{S2C=(t-Bu-fy)}2]2- [t-Bu-fy=2,7-di-tert-butylfluoren-9-ylidene; M=Pd (2a), Pt (2b)] or [M{S2C=(t-Bu-fy)}(dbbpy)] [dbbpy=4,4'-di-tert-butyl-2,2'-bipyridyl; M=Pd (3a), Pt (3b)] to give the heteronuclear complexes [M{S2C=(t-Bu-fy)}2{Au(PCy3)}2] [2:1 molar ratio; M=Pd (4a), Pt (4b)], [M{S2C=(t-Bu-fy)}(dbbpy){Au(PCy3)}]ClO4 [1:1 molar ratio; M=Pd (5a), Pt (5b)], or [M{S2C=(t-Bu-fy)}(dbbpy){Au(PCy3)}2](ClO4)2 [2:1 molar ratio; M=Pd (6a), Pt (6b)]. The crystal structures of 3a, 4a, 4b, 5b, and 6a have been solved by single-crystal X-ray studies and, in the cases of the heteronuclear derivatives, reveal the formation of short Pd...Au or Pt...Au metallophilic contacts in the range of 3.048-3.311 A. Compounds 4a and b and 5a and b undergo a dynamic process in solution that involves the migration of the [Au(PCy3)]+ units between the sulfur atoms of the dithiolato ligands. The coordination of 2a and b and 3a and b to [Au(PCy3)]+ units results in important modifications of their photophysical properties. The dominant effect in the absorption spectra is an increase in the energy of the MLCT (4a and b) or charge transfer to diimine (5a, b, 6a, b) transitions because of a decrease in the energies of the mixed metal/dithiolate HOMOs. The Pd complexes 2a and 4a are luminescent at 77 K, and the features of their emissions are consistent with an essentially metal-centered 3d-d state. The Pt/Au complexes are also luminescent at 77 K, and their emissions can be assigned as originating from a MLCT triplet state (4b) or a mixture of charge transfer to diimine and diimine intraligand pi-pi* triplet states (5b and 6b).     

Intramolecular NH···Pt interactions of platinum(II) diimine complexes with phenyl ligands

Pt(pipNC)(2)(phen) [pipNC(-) = 1-(piperidylmethyl)phenyl anion; phen = 1,10-phenanthroline] was prepared by the reaction of cis-Pt(pipNC)(2) with phen. Crystallographic and (1)H NMR data establish that the phen ligand is bidentate, whereas each piperidyl ligand is monodentate and bonded to the platinum at the ortho position of the phenyl group. Acidic conditions allowed for isolation of the salts of diprotonated Pt(pipNHC)(2)(diimine)(2+) adducts (diimine = phen, 2,2'-bipyridine, or 5,5'-ditrifluoromethyl-2,2'-bipyridine). Crystallographic and spectroscopic data for the diprotonated complexes are consistent with H···Pt interactions (2.32-2.51 ?) involving the piperidinium groups, suggesting that the metal center behaves as a Br?nsted base. Metal-to-ligand (diimine) charge-transfer states of Pt(pipNHC)(2)(phen)(2+) in solution are strongly destabilized (>2500 cm(-1)) relative to Pt(pipNC)(2)(phen), in keeping with the notion that NH···Pt interactions effectively reduce the electron density at the metal center. Though N···Pt interactions in Pt(pipNC)(2)(phen) appear to be weaker than those found for outer-sphere two-electron reagents, such as Pt(pip(2)NCN)(tpy)(+) [pip(2)NCN(-) = 1,3-bis(piperidylmethylphenyl anion; tpy = 2,2':6',2'-terpyridine], each of the Pt(pipNC)(2)(diimine) complexes undergoes diimine ligand dissociation to give back cis-Pt(pipNC)(2) and free diimine ligand. Electrochemical measurements on the deprotonated complexes suggest that the piperidyl groups help to stabilize higher oxidation states of the metal center, whereas protonation of the piperidyl groups has a destabilizing influence.     

Cyclopentadienyl chromium diimine and pyridine-imine complexes: ligand-based radicals and metal-based redox chemistry

Paramagnetic CpCr(III) complexes with antiferromagnetically-coupled anionic radical diimine and pyridine-imine ligands were prepared and characterized. The diimine chloro CpCr[(ArNCR)(2)]Cl complexes (1: Ar = 2,6-iPr(2)C(6)H(3) (Dpp), R = H; 2: Ar = 2,6-Me(2)C(6)H(3) (Xyl), R = Me; 3: Ar = 2,4,6-Me(3)C(6)H(2) (Mes), R = Me) were synthesized by treatment of previously reported Cr(diimine)(THF)(2)Cl(2) precursors with NaCp. Reduction of 1 with Zn gives CpCr[(DppNCH)(2)], 4, resulting from reduction of Cr(III) to Cr(II) with retention of the ligand-based radical. Alkoxide complexes CpCr[(DppNCH)(2)](OCR(2)R') (5: R = Me, R' = Ph; 6: R = iPr, R' = H) were synthesized by protonolysis of Cp(2)Cr with HOCR(2)R' in the presence of the neutral diimine and catalytic base. The corresponding radical pyridine-imine complexes CpCr(PyCHNMes)Cl (9), CpCr(PyCHNMes) (8), and CpCr(PyCHNMes)(OCMe(2)Ph) (11), were prepared by analogous routes. Oxidation of 8 with iodine gives CpCr(PyCHNMes)I (10) where oxidation of Cr(II) to Cr(III) again occurs with retention of the anionic pyridine-imine radical ligand. The molecular structures of complexes 1, 2, 4-8, 10 and 11 were determined by single-crystal X-ray diffraction. Unusual low energy bands were observed in the UV-vis spectra of the reported complexes, with particularly strong transitions observed for the Cr(II) complexes 4 and 8. The electronic structure of pyridine-imine complexes 8 and 10 were investigated by theoretical calculations.     

New synthetic routes to biscarbonylbipyridinerhenium(I) complexes cis,trans-[Re(X2bpy)(CO)2(PR3)(Y)n+ (X2bpy = 4,4'-X2-2,2'-bipyridine) via photochemical ligand substitution reactions, and their photophysical and electrochemical properties

Photochemical ligand substitution of fac-[Re(X2bpy)(CO)3(PR3)]+ (X2bpy = 4,4'-X2-2,2'-bipyridine; X = Me, H, CF3; R = OEt, Ph) with acetonitrile quantitatively gave a new class of biscarbonyl complexes, cis,trans[Re(X2bpy)(CO)2(PR3)(MeCN)]+, coordinated with four different kinds of ligands. Similarly, other biscarbonylrhenium complexes, cis,trans-[Re(X2bpy)(CO)2(PR3)(Y)]n+ (n = 0, Y = Cl-; n = 1, Y = pyridine, PR'3), were synthesized in good yields via photochemical ligand substitution reactions. The structure of cis,trans-[Re(Me2bpy)(CO)2[P(OEt)3](PPh3)](PF6) was determined by X-ray analysis. Crystal data: C38H42N2O5F6P3Re, monoclinic, P2(1/a), a = 11.592(1) A, b = 30.953(4) A, c = 11.799(2) A, V = 4221.6(1) A3, Z = 4, 7813 reflections, R = 0.066. The biscarbonyl complexes with two phosphorus ligands were strongly emissive from their 3MLCT state with lifetimes of 20-640 ns in fluid solutions at room temperature. Only weak or no emission was observed in the cases Y = Cl-, MeCN, and pyridine. Electrochemical reduction of the biscarbonyl complexes with Y = Cl- and pyridine in MeCN resulted in efficient ligand substitution to give the solvento complexes cis,trans-[Re(X2bpy)(CO)2(PR3)(MeCN)]+.     

(Fluoren-9-ylidene)methanedithiolato complexes of platinum: synthesis, reactivity, and luminescence

Platinum(II) complexes with (fluoren-9-ylidene)methanedithiolato and its 2,7-di-tert-butyl- and 2,7-dimethoxy-substituted analogues were obtained by reacting different chloroplatinum(II) precursors with the piperidinium dithioates (pipH)[(2,7-R2C12H6)CHCS2] [R = H (1a), t-Bu (1b), or OMe (1c)] in the presence of piperidine. The anionic complexes Q2[Pt{S(2)C=C(C12H6R(2)-2,7)}2] [R = H, (Pr(4)N)(2)2a; R = t-Bu, (Pr4N)(2)2b, (Et4N)(2)2b; R = OMe, (Pr4N)(2)2c] were prepared from PtCl(2), piperidine, the corresponding QCl salt, and 1a-c in molar ratio 1:2:2:2. In the absence of QCl, the complexes (pipH)(2)2b and [Pt(pip)(4)]2b were isolated depending on the PtCl(2):pip molar ratio. The neutral complexes [Pt{S2C=C(C12H6R(2)-2,7)L(2)] [L = PPh(3), R = H (3a), t-Bu (3b), OMe (3c); L = PEt(3), R = H (4a), t-Bu (4b), OMe (4c); L(2) = dbbpy, R = H (5a), t-Bu (5b), OMe (5c) (dbbpy = 4,4'-di-tert-butyl-2,2'-bipyridyl)] were similarly prepared from the corresponding precursors [PtCl2L2] and 1a-c in the presence of piperidine. Oxidation of Q(2)2b with [FeCp2]PF6 afforded the mixed Pt(II)-Pt(IV) complex Q2[Pt2{S2C=C[C12H6(t-Bu)(2)-2,7]}4] (Q(2)6, Q = Et4N+, Pr4N+). The protonation of (Pr4N)(2)2b with 2 equiv of triflic acid gave the neutral dithioato complex [Pt2{S2CCH[C12H6(t-Bu)(2)-2,7]}4] (7). The same reaction in 1:1 molar ratio gave the mixed dithiolato/dithioato complex Pr4N[Pt{S2C=C[C12H6(t-Bu)(2)-2,7]}{S2CCH[C12H6(t-Bu)(2)-2,7]}] (Pr(4)N8) while the corresponding DMANH+ salt was obtained by treating 7 with 2 equiv of 1,8-bis(dimethylamino)naphthalene (DMAN). The crystal structures of 3b and 5c.CH2Cl2 have been solved by X-ray crystallography. All the platinum complexes are photoluminescent at 77 K in CH2Cl2 or KBr matrix, except for Q(2)6. Compounds 5a-c and Q8 show room-temperature luminescence in fluid solution. The electronic absorption and emission spectra of the dithiolato complexes reveal charge-transfer absorption and emission energies which are significantly lower than those of analogous platinum complexes with previously described 1,1-ethylenedithiolato ligands and in most cases compare well to those of 1,2-dithiolene complexes.     

Pt(II) and Pt(IV) amido, aryloxide, and hydrocarbyl complexes: synthesis, characterization, and reaction with dihydrogen and substrates that possess C-H bonds

The Pt(II) amido and phenoxide complexes ((t)bpy)Pt(Me)(X), ((t)bpy)Pt(X)(2), and [((t)bpy)Pt(X)(py)][BAr'(4)] (X = NHPh, OPh; py = pyridine) have been synthesized and characterized. To test the feasibility of accessing Pt(IV) complexes by oxidizing their Pt(II) precursors, the previously reported ((t)bpy)Pt(R)(2) (R = Me and Ph) systems were oxidized with I(2) to yield ((t)bpy)Pt(R)(2)(I)(2). The analogous reaction with ((t)bpy)Pt(Me)(NHPh) and MeI yields the corresponding ((t)bpy)Pt(Me)(2)(NHPh)(I) complex. Reaction of ((t)bpy)Pt(Me)(NHPh) and phenylacetylene at 80 °C results in the formation of the Pt(II) phenylacetylide complex ((t)bpy)Pt(Me)(C≡CPh). Kinetic studies indicate that the reaction of ((t)bpy)Pt(Me)(NHPh) and phenylacetylene occurs via a pathway that involves [((t)bpy)Pt(Me)(NH(2)Ph)][TFA] as a catalyst. The reaction of H(2) with ((t)bpy)Pt(Me)(NHPh) ultimately produces aniline, methane, (t)bpy, and elemental Pt. For this reaction, mechanistic studies reveal that 1,2-addition of dihydrogen across the Pt-NHPh bond to initially produce ((t)bpy)Pt(Me)(H) and free aniline is catalyzed by elemental Pt. Heating the cationic complexes [((t)bpy)Pt(NHPh)(py)][BAr'(4)] and [((t)bpy)Pt(OPh)(py)][BAr'(4)] in C(6)D(6) does not result in the production of aniline and phenol, respectively. Attempted synthesis of a cationic system analogous to [((t)bpy)Pt(NHPh)(py)][BAr'(4)] with ligands that are more labile than pyridine (e.g., NC(5)F(5)) results in the formation of the dimer [((t)bpy)Pt(μ-NHPh)](2)[BAr'(4)](2). Solid-state X-ray diffraction studies of the complexes ((t)bpy)Pt(Me)(NHPh), [((t)bpy)Pt(NH(2)Ph)(2)][OTf](2), ((t)bpy)Pt(NHPh)(2), ((t)bpy)Pt(OPh)(2), ((t)bpy)Pt(Me)(2)(I)(2), and ((t)bpy)Pt(Ph)(2)(I)(2) are reported.     

Synthesis, characterization, crystal structure, and electrochemical, photophysical, and protein-binding properties of luminescent rhenium(I) diimine indole complexes

We report the synthesis, characterization, and photophysical and electrochemical properties of a series of luminescent rhenium(I) diimine indole complexes, [Re(N-N)(CO)3(L)](CF3SO3) (N-N = 3,4,7,8-tetramethyl-1,10-phenanthroline (Me4-phen), L = N-(3-pyridoyl)tryptamine (py-3-CONHC2H4-indole) (1a), N-[N-(3-pyridoyl)-6-aminohexanoyl]tryptamine, (py-3-CONHC5H10CONHC2H4-indole) (1b); N-N = 1,10-phenanthroline (phen), L = py-3-CONHC2H4-indole (2a), py-3-CONHC5H10CONHC2H4-indole (2b); N-N = 2,9-dimethyl-1,10-phenanthroline (Me2-phen), L = py-3-CONHC2H4-indole (3a), py-3-CONHC5H10CONHC2H4-indole (3b); N-N = 4,7-diphenyl-1,10-phenanthroline (Ph2-phen), L = py-3-CONHC2H4-indole (4a), py-3-CONHC5H10CONHC2H4-indole (4b)), and their indole-free counterparts, [Re(N-N)(CO)3(py-3-CONH-Et)](CF3SO3) (py-3-CONH-Et = N-ethyl-(3-pyridyl)formamide; N-N = Me4-phen (1c), phen (2c), Me2-phen (3c), Ph2-phen (4c)). The X-ray crystal structure of complex 3a has also been investigated. Upon irradiation, most of the complexes exhibited triplet metal-to-ligand charge-transfer (3MLCT) (d pi(Re) --> pi*(diimine)) emission in fluid solutions at 298 K and in low-temperature glass. However, the structural features and long emission lifetimes of the Me4-phen complexes in solutions at room temperature suggest that the excited state of these complexes exhibited substantial triplet intraligand (3IL) (pi --> pi*) (Me4-phen) character. The binding interactions of these complexes to indole-binding proteins including bovine serum albumin and tryptophanase have been examined.     

Carbonyl-carboxylato-ruthenium complexes incorporating diimine ligands and unexpected cyclometalation of carboxylate ligands

We report two new synthetic routes to the dinuclear Ru(I) complexes, [Ru(I)(2)(RCO(2))(CO)(4)(N( wedge )N)(2)](+) (N( wedge )N = 2,2'-bipyridine or 1,10-phenanthroline derivatives) that use RuCl(3).3H(2)O as a starting material. Direct addition of the bidentate diimine ligand to a methanolic solution of [Ru(CO)(2)Cl(2)](n) and sodium acetate yielded a mixture of [Ru(I)(2)(MeCO(2))(CO)(4)(N( wedge )N)(2)](+) (N( wedge )N = 4,4'-dmbpy, and 5,6-dmphen), and [Ru(II)(MeCO(2))(2)(CO)(2)(N( wedge )N)] (N( wedge )N = 4,4'-dmbpy and 5,5'-dmbpy). Single-crystal X-ray studies confirmed that the Ru(II) complexes had a trans-acetate-cis-carbonyl arrangement of the ligands. In contrast, the use of sodium benzoate resulted in the unexpected formation of a Ru-C bond producing ortho-cyclometalated complexes, [Ru(II)(O(2)CC(6)H(4))(CO)(2)(N( wedge )N)], where N( wedge )N = bpy or phen. A second approach used ligand exchange between a bidentate ligand (N( wedge )N) and the pyridine ligands of [Ru(I)(RCO(2))(CO)(2)(py)](2) to convert these neutral complexes into [Ru(I)(2)(RCO(2))(CO)(4)(N( wedge )N)(2)](+). This method, although it involved more steps, was applicable for a wider variety of diimine ligands (R = Me and N( wedge )N = 4,4'-dmbpy, 5,5'-dmbpy, 5,6-dmphen; R = Ph and N( wedge )N = bpy, phen, 5,6-dmphen).     

Syntheses and Characterizations of Luminescent Complexes [(BINAP)Pt(C≡CC6H4R-p)2] (R = H, 1; CH3, 2) (BINAP = 2,2''-Bis(diphenylphosphino)-1,1''-binaphthyl)

[(BINAP)Pt(C≡CC6H4R-p)2] (R = H, 1; CH3, 2) (BINAP = 2,2'-bis(diphenylphos- phino)-1,1'-binaphthyl) were synthesized and characterized by X-ray crystallography. Complex 1 crystallizes in triclinic, space group P with a = 11.699(3), b = 12.512(3), c = 15.611(4)(A), α = 93.277(3),β= 97.626(2), γ = 97.375(14)o, V = 2239.9(9)(A)3, Mr = 1014.92, Z = 2, Dc = 1.505 g/cm3, F(000) = 1010, μ(MoKα) = 3.244 mm-1, the final R = 0.0338 and wR = 0.0905 for 7738 observed reflections (I > 2σ(I)). Complex 2 crystallizes in monoclinic, space group P21/n with a = 18.03690 (10), b = 13.06060(10), c = 21.6913(3)(A), β= 96.5430(10)o, V = 5076.60(9)(A)3, Mr = 1132.94, Z = 4, Dc = 1.482 g/cm3, F(000) = 2272, μ(MoKα) = 2.973 mm-1, the final R = 0.0481 and wR = 0.0893 for 8916 observed reflections (I > 2σ(I)). Both complexes emit intensively photoluminescence in both solid state and fluid solution due to MLCT (Pt→-C≡CC6H4R-p) emissive state.     

Unsymmetrical diimine chelation to M(II) (M=Zn, Cd, Pd): atropisomerism, pi-pi stacking and photoluminescence

Three types of atropisomeric unsymmetrical diimine complexes, tetrahedral (L(R)(Φ))MX(2) (M = Zn, Cd; X = Cl, Br; R = Me, CMe(3), OH, OMe, Cl; 1a-k, type-I), tetrahedral (L(Me2)(Φ))ZnBr(2) (2, type-II) and square planar (L(OH)(?))PdCl(2) (3, type-III) with different photoluminescence properties, have been reported (L(R)(Φ) = (E)-4-R-N-(pyridine-2-ylmethylene)aniline; Φ = dihedral angle between the diimine unit including the pyridine ring and the phenyl ring planes). In crystals, Φ = 0° for type-I, 90° for type-II and 63° for type-III atropisomers have been confirmed by single crystal X-ray structure determinations of 1c, 1e, 2 and 3·H(2)O isomers. Optimizations of geometries in methanol have established Φ = 28-32° for type-I, 90.83° for type-II and 43.44° for type-III isomers. In solids, type-I atropisomers with Φ = 0, behave as conjugated 14πe systems facilitating π-π stacking and are brightly luminescent at room temperature while type-II and type-III isomers in solid and type-I isomers in solutions are more like non-conjugated 8πe + 6πe systems and non-emissive. Frozen glasses of acetonitrile, methanol and dichloromethane-toluene mixture at 77 K of type-I isomers are emissive and display structured excitation and emission spectra for R = Me, CMe(3), OMe species. Excitation and emission maxima of frozen glasses (λ(ex) = 320-380 nm; λ(em) = 440-485 nm) are red shifted in the solid (λ(ex) = 390-455 nm; λ(em) = 470-550 nm). TD-DFT calculations on 1b, 1d, 1f and stacked (1b)(2) isomers and luminescence lifetime measurements have elucidated that an excited (1)ILCT state has been the origin of emission of the type-I isomers and delocalizations of the photoactive π(diimine) and π(diimine)(*) orbitals of the L(R)(Φ) over the stacked layers shift the λ(ext) and λ(em) of solids to lower energies than those in frozen glasses. The trends of diimine ligand based electron transfer events of the complexes in DMF have been investigated by cyclic voltammetry at 298 K.     

Polymerization of methyl methacrylate catalyzed by nickel complexes with hydroxyindanone-imine ligands

A series of new hydroxyindanone-imine ligands [PhN=CC2H3(CH3)C6H2(CH3)OH] (HL1) and [ArN=CC2H3(CH3)C6H2(R)OH] (Ar = 2,6-i-Pr(2)C(6)H(3), R = Me (HL2), R = H (HL3), and R = Cl (HL4)) were synthesized and characterized. Reactions of hydroxyindanone-imines with Ni(OAc)(2).4H(2)O result in the formation of the trinuclear hexa(indanone-iminato)tri(nickel(II)) complex Ni(3)[PhN=CC2H3(CH3)C6H2(CH3)O](6) (1) and the mononuclear bis(indanone-iminato)nickel(II) complexes Ni[ArN=CC2H3(CH3)C6H2(R)O](2) (Ar = 2,6-i-Pr(2)C(6)H(3), R = Me (2), R = H (3), and R = Cl (4)). All nickel complexes were characterized by their IR, NMR spectra and elemental analyses. In addition, X-ray structure analyses were performed for complexes 1 and 2. After being activated with methylaluminoxane (MAO), these nickel(II) complexes can be used as catalysts for the polymerization of methyl methacrylate (MMA) to produce syndiotactic-rich PMMA. Catalytic activities and the degree of syndiotacticity of PMMA have been investigated for various reaction conditions.     

Synthesis and characterisation of mixed ligand Pt(II) and Pt(IV) oxadiazoline complexes

The nitrile ligands in trans-[PtX2(PhCN)2] (X = Cl, Br, I) undergo sequential 1,3 dipolar cycloadditions with nitrones R1R2C=N+(Me)-O(-) (R1 = H, R2 = Ph; R1 = CO2Et, R2 = CH2CO2Et) to selectively form the Delta4-1,2,4-oxadiazoline complexes trans-[PtX2(PhCN) (N=C(Ph)-O-N(Me)-CR1R2)] or trans-[PtX2(N=C(Ph)-O-N(Me)-CR1R2)2] in high yields. The reactivity of the mixed ligand complexes trans-[PtX2(PhCN)(N=C(Ph)-O-N(Me)-CR1R2)] towards oxidation and ligand substitution was studied in more detail. Oxidation with Cl2 or Br2 provides the Pt(IV) species trans-[PtX2Y2(PhCN)(N=C(Ph)-O-N(Me)-CH(Ph))] (X, Y = Cl, Br). The mixed halide complex (X = Cl, Y = Br) undergoes halide scrambling in solution to form trans-[PtX(4-n)Yn(PhCN)(N=C(Ph)-O-N(Me)-CH(Ph))] as a statistical mixture. Ligand substitution in trans-[PtCl2(PhCN)(N=C(Ph)-O-N(Me)-CR1R2)] allows for selective replacement of the coordinated nitrile by nitrogen heterocycles such as pyridine, DMAP or 1-benzyl-2-methylimidazole to produce mixed ligand Pt(II) complexes of the type trans- [PtX2(heterocycle)(N=C(Ph)-O-N(Me)-CR1R2)]. All compounds were characterised by elemental analysis, mass spectrometry, IR and 1H, 13C and 195Pt NMR spectroscopy. Single-crystal X-ray structural analysis of (R,S)-trans-[PtBr2(N=C(Ph)-O-N(Me)-CH(Ph))2] and trans-[PtCl2(C5H5N)(N=C(Ph)-O-N(Me)-CH(Ph))] confirms the molecular structure and the trans configuration of the heterocycles relative to each other.     

Syntheses, luminescence behavior, and assembly reaction of tetraalkynylplatinate(II) complexes: crystal structures of [Pt((t)Bu(3)trpy)(Ctbd1;CC(5)H(4)N)Pt((t)Bu(3)trpy)](PF(6))(3) and [Pt(2)Ag(4)(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(8)(THF)(4)

A series of tetraalkynylplatinate(II) complexes, (NBu(4))(2)[Pt(Ctbd1;CR)(4)] (R = C(6)H(4)N-4, C(6)H(4)N-3, and C(6)H(3)N(2)-5), and the diynyl analogues, (NBu(4))(2)[Pt(Ctbd1;CCtbd1;CR)(4)] (R = C(6)H(5) and C(6)H(4)CH(3)-4), have been synthesized. These complexes displayed intense photoluminescence, which was assigned as metal-to-ligand charge transfer (MLCT) transitions. Reaction of (Bu(4)N)(2)[Pt(Ctbd1;CC(5)H(4)N-4)(4)] with 4 equiv of [Pt((t)Bu(3)trpy)(MeCN)](OTf)(2) in methanol did not yield the expected pentanuclear platinum product, [Pt(Ctbd1;CC(5)H(4)N)(4)[Pt((t)Bu(3)trpy)](4)](OTf)(6), but instead afforded a strongly luminescent 4-ethynylpyridine-bridged dinuclear complex, [Pt((t)Bu(3)trpy)(Ctbd1;CC(5)H(4)N)Pt((t)Bu(3)trpy)](PF(6))(3,) which has been structurally characterized. The emission origin is assigned as derived from states of predominantly (3)MLCT [d(pi)(Pt) --> pi((t)Bu(3)trpy)] character, probably mixed with some intraligand (3)IL [pi --> pi(Ctbd1;C)], and ligand-to-ligand charge transfer (3)LLCT [pi(Ctbd1;C) --> pi((t)()Bu(3)trpy)] character. On the other hand, reaction of (Bu(4)N)(2)[Pt(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(4)] with [Ag(MeCN)(4)][BF(4)] gave a mixed-metal aggregate, [Pt(2)Ag(4)(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(8)(THF)(4)]. The crystal structure of [Pt(2)Ag(4)(Ctbd1;CCtbd1;CC(6)H(4)CH(3)-4)(8)(THF)(4)] has also been determined. A comparison study of the spectroscopic properties of the hexanuclear platinum-silver complex with its precursor complex has been made and their spectroscopic origins were suggested.     

Luminescent platinum(II) terpyridyl complexes: effect of counter ions on solvent-induced aggregation and color changes

A series of platinum(II) terpyridyl complexes [Pt(tpy)(C triple bond C-C triple bond CH)]X, 1-X (X=OTf-; PF6-; ClO4-; BF4-; BPh4-); [Pt(tpy)(C triple bond CC6H5)]X, 2-X (X=OTf-; PF6-; ClO4-; BF4-); [Pt(tpy)(C triple bond CC6H4OCH3-4)]OTf, 3-OTf, and [Pt(4'-CH3O-tpy)(C triple bond CC6H5)]OTf, 4-OTf (tpy=2,2':6',2'-terpyridine, OTf=trifluoromethanesulfonate) were synthesized and their photophysical properties determined. Electronic absorption and emission studies showed the formation of a new band upon increasing the diethyl ether content in an acetonitrile/diethyl ether mixture. This was ascribed to the formation of complex aggregates, the solution color of which is dependent on the nature of the anions. This indicates that counter ions play an important role in governing the degree of aggregation and the extent of interactions within these aggregates. Addition of various anions to solutions of 1-OTf and 1-PF6 produced anion-induced color changes upon solvent-induced aggregation, indicating that these complexes may serve as potential colorimetric anion probes.     

The synthesis and structure of heteroleptic tris(diimine)ruthenium(II) complexes

The reactions of bidentate diimine ligands (L2) with cationic bis(diimine)[Ru(L)(L1)(CO)Cl]+ complexes (L, L1, L2 are dissimilar diimine ligands), in the presence of trimethylamine-N-oxide (Me3NO) as a decarbonylation reagent, lead to the formation of heteroleptic tris(diimine) ruthenium(II) complexes, [Ru(L)(L1)(L2)]2+. Typically isolated as hexafluorophosphate or perchlorate salts, these complexes were characterised by UV-visible, infrared and mass spectroscopy, cyclic voltammetry, microanalyses and NMR spectroscopy. Single crystal X-ray studies have elucidated the structures of K[Ru(bpy)(phen)(4,4'-Me(2)bpy)](PF(6))(3).1/2H(2)O, [Ru(bpy)(5,6-Me(2)phen)(Hdpa)](ClO(4))(2), [Ru(bpy)(phen)(5,6-Me(2)phen)](ClO(4))(2), [Ru(bpy)(5,6'-Me(2)phen)(4,4'-Me(2)bpy)](PF(6))(2).EtOH, [Ru(4,4'-Me(2)bpy)(phen)(Hdpa)](PF(6))(2).MeOH and [Ru(bpy)(4,4'-Me(2)bpy)(Hdpa)](ClO(4))(2).1/2Hdpa (where Hdpa is di(2-pyridyl)amine). A novel feature of the first complex is the presence of a dinuclear anionic adduct, [K(2)(PF(6))(6)](4-), in which the two potassium centres are bridged by two fluorides from different hexafluorophosphate ions forming a K(2)F(2) bridging unit and by two KFPFK bridging moieties.