Rhenium chemistry of azooximes: oxygen atom transfer, azoimine chelation, and imine-oxime contrast

The concerned azooximes (L1OH, 1) are of type p-X-C6H4C(N2Ph)(NOH) (X = H, Me, Cl). The reaction of [Re(MeCN)Cl3(PPh3)2] with [Ag(L1OH)(L1O)] in cold dichloromethane-acetonitrile solvent has furnished the green colored ionized azoimine complex [ReV(O)Cl(PPh3)2(L1)](PF6), 2. In effect L1O- has undergone oxidative addition, the oxygen atom being transferred to the metal site. Upon treatment of [ReV(NPh)Cl3(PPh3)2] with L1OH in solution, the neutral azoimine complex [ReV(NPh)Cl3(L1H)], 3, resulted due to the spontaneous transfer of the oxime oxygen atom to a PPh3 ligand, which is eliminated as OPPh3. In contrast, the oxime of 2-acetylpyridine (L2OH, 4) did not undergo oxygen atom transfer and simply afforded the imine-oxime complex [ReV(NC6H4Y)Cl2(PPh3)(L2O)], 5, upon reacting with [ReV(NC6H4Y)Cl3(PPh3)2] (Y = H, Me, Cl). The spectral and electrochemical properties of 2, 3, and 5 and the structures of three representative compounds are reported. In the cation of 2 (X = H) the two PPh3 ligands lie trans to each other and the equatorial plane is defined by the five-membered azoimine chelate ring and the oxo and chloro ligands. The oxo ligand which forms a model triple bond (Re-O length 1.616(6) A) lies cis to the imine-N atom. In 3 (X = Cl) the ReCl3 fragment has meridional geometry and the imido nitrogen lies trans to the imine nitrogen of the planar azoimine chelate ring. In 5 x H2O (Y = Me), the Cl, oximato-N, and P atoms define an equatorial plane and the pyridine-N lies trans to the imido-N. The water of crystallization is hydrogen bonded to the oximato oxygen atom (O...O, 2.829(5) A). Reaction models in which chelation of the azooxime precedes oxygen atom transfer are proposed on the basis of oxophilicity of trivalent rhenium, Lewis acid activity of pentavalent rhenium, electron withdrawal by the azo group, and observed relative disposition of ligands in products.     

Synthesis of cationic rhenium(VII) oxo imido complexes and their tunability towards oxygen atom transfer

A facile method is described for the synthesis of cationic Re(VII) cis oxo imido complexes of the form [Re(O)(NAr)(salpd)+] (salpd = N,N'-propane-1,3-diylbis(salicylideneimine)), 4, [Re(O)(NAr)(saldach)+] (saldach = N,N'-cyclohexane-1,3-diylbis(salicylideneimine)), 5, and [Re(O)(NAr)(hoz)2+] (hoz = 2-(2'-hydroxyphenyl)-2-oxazoline) (Ar = 2,4,6,-(Me)C(6)H(2); 4-(OMe)C(6)H(4); 4-(Me)C(6)H(4); 4-(CF3)C6H4; 4-MeC(6)H(4)SO(2)), 6, from the reaction of oxorhenium(V) [(L)Re(O)(Solv)+] (1-3) and aryl azides under ambient conditions. Unlike previously reported cationic Re(VII) dioxo complexes, these cationic oxo imido complexes can be obtained on a preparative scale, and an X-ray crystal structure of [Re(O)(NMes)(saldach)+], 5a, has been obtained. Despite the multiple stereoisomers that could arise from tetradentate ligation of salen ligands to rhenium, one major isomer is observed and isolated in each instant. The electronic rationalization for stereoselectivity is discussed. Investigation of the mechanism suggests that the reactions of Re(V) with aryl azides proceed through an azido adduct similar to the group 5 complexes of Bergman and Cummins. Treatment of the cationic oxo imido complexes with a reductant (PAr(3), PhSMe, or PhSH) results in oxygen atom transfer (OAT) and the formation of cationic Re(V) imido complexes. [(salpd)Re(NMes)(PPh(3))(+)] (7) and [(hoz)2Re(NAr)(PPh(3))(+)] (Ar = m-OMe phenyl) (9) have been isolated on a preparative scale and fully characterized including an X-ray single-crystal structure of 7. The kinetics of OAT, monitored by stopped-flow spectroscopy, has revealed rate saturation for substrate dependences. The different plateau values for different oxygen acceptors (Y) provide direct support for a previously suggested mechanism in which the reductant forms a prior-equilibrium adduct with the rhenium oxo (ReVII = O<--Y). The second-order rate constants of OAT, which span more than 3 orders of magnitude for a given substrate, are significantly affected by the electronics of the imido ancillary ligand with electron-withdrawing imidos being most effective. However, the rate constant for the most active oxo imido rhenium(VII) is 2 orders of magnitude slower than that observed for the known cationic dioxo Re(VII) [(hoz)2Re(O)(2)(+)].     

Pyridylazole chelation of oxorhenium(V) and imidorhenium(V). Rates and trends of oxygen atom transfer from Re(V)O to tertiary phosphines

The concerned azoles are 2-(2-pyridyl)benzoxazole (pbo) and 2-(2-pyridyl)benzthiazole (pbt). These react with ReOCl(3)(PPh(3))(2) in benzene, affording Re(V)OCl(3)(pbo) and Re(V)OCl(3)(pbt), which undergo facile oxygen atom transfer to PPh(2)R (R = Ph, Me) in dichloromethane solution, furnishing Re(III)(OPPh(2)R)Cl(3)(pbo) and Re(III)(OPPh(2)R)Cl(3)(pbt). The oxo species react with aniline in toluene solution, yielding the imido complexes Re(V)(NPh)Cl(3)(pbo) and Re(V)(NPh)Cl(3)(pbt). The X-ray structures of pbt, ReOCl(3)(pbt), Re(OPPh(3))Cl(3)(pbt), and Re(NPh)Cl(3)(pbo) are reported. The lattice of pbt consists of stacked dimers. In all the complexes the azole ligand is N,N-chelated and the ReCl(3) moiety is meridionally disposed. In ReOCl(3)(pbt) the metal-oxo bond length is 1.607(9) A. The second-order rates and the associated activation parameters of the oxygen atom transfer reactions of the Re(V)O chelates with PPh(2)R are reported. The large and negative entropy of activation (approximately -24 eu) is consistent with an associative pathway involving nucleophilic phosphine attack. The rate increases with phosphine basicity (PPh(2)Me > PPh(3)) and azole heteroatom electronegativity (O(pbo) > S(pbt)). Logarithmic rate constants for ReOCl(3)(pbo), ReOCl(3)(pbt), and ReOCl(3)(pal) are found to correlate linearly with Re(VI)O/Re(V)O reduction potentials (pal is pyridine-2-(N-p-tolyl)aldimine). The relatively low rate constant of ReOCl(3)(pbt) compared to that of ReOCl(3)(pal) is consistent with the observed shortness of the metal-oxo bond in the former. Crystal data are as follows: (pbt) empirical formula C(12)H(8)N(2)S, crystal system orthorhombic, space group Pca2(1), a = 13.762(9) A, b = 12.952(8) A, c = 11.077(4) A, V = 1974(2) A(3), Z = 8; (ReOCl(3)(pbt)) empirical formula C(12)H(8)Cl(3)N(2)OSRe, crystal system monoclinic, space group P2(1)/c, a = 11.174(7) A, b = 16.403(10) A, c = 7.751(2) A, beta = 99.35(4) degrees, V = 1401.8(13) A(3), Z = 4; (Re(NPh)Cl(3)(pbo)) empirical formula C(18)H(13)Cl(3)N(3)ORe, crystal system monoclinic, space group P2(1)/c, a = 9.566(6) A, b = 16.082(8) A, c = 11.841(5) A, beta = 94.03(4) degrees, V = 1817(2) A(3), Z = 4.     

Hydrolysis, hydrosulfidolysis, and aminolysis of imido(methyl)rhenium complexes

The tris(imido)methylrhenium complex CH3Re(NAd)3 (1a, Ad = 1-adamantyl) reacts with H2O to give CH3Re(NAd)2O (2a) and AdNH2. The resulting di(imido)oxo species can further react with another molecule of H2O to generate CH3Re(NAd)O2 (3a). The kinetics of these reactions have been studied by means of 1H NMR and UV-vis spectroscopies. The second-order rate constant for the reaction of 1a with H2O at 298 K in C6H6 is 3.3 L mol-1 s-1, which is much larger than the value 1 x 10(-4) L mol-1 s-1 obtained for the reaction between CH3Re(NAr)3 (1b, Ar = 2,6-diisopropylphenyl) and H2O in CH3CN at 313 K. Both 1a and 1b react with H2S to produce the rhenium(VII) sulfide, (CH3Re(NR)2)2(mu-S)2 (4a, R = Ad; 4b, R = Ar), with second-order rate constants of 17 and 1.6 x 10(-4) L mol-1 s-1 in C6H6 and CH3CN, respectively. Complex 4b has been structurally characterized. The crystal data are as follows: space group C2/c, a = 30.4831 (19) A, b = 10.9766 (7) A, c = 18.1645 (11) A, beta = 108.268(1) degrees, V = 5771.5 (6) A3, Z = 4. The reaction between CH3Re(NAr)2O (2b) and H2S also yields the dinuclear compound 4b. Unlike 1b, 1a reacts with aniline derivatives to give mixed imido rhenium complexes.     

Rhenium chemistry of diazabutadienes and derived iminoacetamides spanning the valence domain II-VI. Synthesis, characterization, and metal-promoted regiospecific imine oxidation

The reaction of diazabutadienes of type R'N=C(R)-C(R)=NR', L (R = H, Me; R' = cycloalkyl, aryl) with Re(V)OCl(3)(AsPh(3))(2) has furnished Re(V)OCl(3)(L), 1, from which Re(III)(OPPh(3))Cl(3)(L), 2, and Re(V)(NAr)Cl(3)(L), 3, have been synthesized. Chemical oxidation of 2(R = H) by aqueous H(2)O(2) and of 3(R = H) by dilute HNO(3) has yielded Re(IV)(OPPh(3))Cl(3)(L'), 5, and Re(VI)(NAr)Cl(3)(L'), 4, respectively, where L' is the monoionized iminoacetamide ligand R'N=C(H)-C(=O)-NR'(-). Finally, the reaction of Re(V)O(OEt)X(2)(PPh(3))(2) with L has furnished bivalent species of type Re(II)X(2)(L)(2), 6(X = Cl, Br). The X-ray structures of 1 (R = Me, R' = Ph), 3 (R = H, R' = Ph, Ar = Ph), and 4 (R = H, R' = cycloheptyl, Ar = C(6)H(4)Cl) are reported revealing meridional geometry for the ReCl(3) fragment and triple bonding in the ReO (in 1) and ReNAr (in 3 and 4 ) fragments. The cis geometry (two Re-X stretches) of ReX(2)(L)(2) is consistent with maximized Re(II)-L back-bonding. Both ReX(2)(L)(2) and Re(NAr)Cl(3)(L') are paramagnetic (S = (1)/(2)) and display sextet EPR spectra in solution. The g and A values of Re(NAr)Cl(3)(L') are, respectively, lower and higher than those of ReX(2)(L)(2). All the complexes are electroactive in acetonitrile solution. The Re(NAr)Cl(3)(L) species display the Re(VI)/Re(V) couple near 1.0 V versus SCE, and coulometric studies have revealed that, in the oxidative transformation of 3 to 4, the reactive intermediate is Re(VI)(NAr)Cl(3)(L)(+) which undergoes nucleophilic addition of water at an imine site followed by induced electron transfer finally affording 4. In the structure of 3 (R = H, R' = Ph, Ar = Ph), the Re-N bond lying trans to the chloride ligand is approximately 0.1 A shorter than that lying trans to NPh. It is thus logical that the imine function incorporating the former bond is more polarized and therefore subject to more facile nucleophilic attack by water. This is consistent with the regiospecificity of the imine oxidation as revealed by structure determination of 4 (R = H, R' = cycloheptyl, Ar = C(6)H(4)Cl).     

Oxygen atom transfer from nitrogenous ReVO reagents to diphosphines and subsequent transformations. Rhenium(III) products and reaction models

The concerned diphosphines are Ph2P(CH2)nPPh2 (1), abbreviated PnP, and the ReVO reagents are ReOCl3L (2) and ReOCl3L' (3), where L and L' are the azopyridine and pyridine-imine ligands p-ClC6H4N=NC5H4N and p-MeC6H4N=CHC5H4N, respectively. One atom transfer from 2 to 1 has afforded Re(OPnP)Cl3L (4a, n = 1; 4b, n = 2; 4c, n = 3). Of these 4b and 4c are stable, but 4a undergoes spontaneous isomerization to Re(PlPO)Cl3L (5) in solution. Two-atom transfer studied with both 2 and 3 has afforded binuclear LCl3Re(OPnPO)ReCl3L (8a, n = 2; 8b, n = 3) and L'Cl3Re(OPnPO)ReCl3L' (9a, n = 2; 9b, n = 3) for n = 2, 3 and mononuclear Re(OP1PO)Cl3L (11) and Re(OP1PO)Cl3L' (12) for n = 1. The mixed system L'Cl3Re(OP2PO)ReCl3L (10) has been prepared from 3 and 4b. The complex Re(PPh3)Cl3L (7a) is furnished by the reaction of Re(OPPh3)Cl3L (6a) or 4b or 11 with PPh3. The species have been characterized with the help of spectral, electrochemical, and X-ray structural data. All the complexes have mer geometry except 5 and 7a, which have fac geometry. The latter is best suited for concurrent Re-N and Re-P back-bonding. Variable-temperature rate data of the reaction 4a-->5 are consistent with an intramolecular strongly associative transition state (delta S++, -22.6 eu) in which the dangling phosphine function lies close to the metal. Two-atom transfer to P1P is believed to proceed via a transient binuclear intermediate which undergoes cleavage at one end due to steric crowding, affording 11 and 12. Crystal data for the complexes are as follows: 5.1.5 C6H6, empirical formula C45H39Cl4N3OP2Re, crystal system triclinic, space group P1, a = 10.034(2) A, b = 10.737(2) A, c = 20.357(4) A, alpha = 89.38(3) degrees, beta = 87.79(3) degrees, gamma = 80.22(3) degrees, V = 2159.7(7) A3, Z = 2; 7a.CH2Cl2, empirical formula C30H25Cl6N3PRe, crystal system monoclinic, space group P2(1)/n, a = 11.695(6) A, b = 17.745(7) A, c = 15.459(9) A, beta = 100.94(5) degrees, V = 3150(3) A3, Z = 4; 9a, empirical formula C52H48Cl6N4O2P2Re2, crystal system monoclinic, space group C2/c, a = 19.769(12) A, b = 12.864(6) A, c = 22.20(2) A, beta = 101.76(6) degrees, V = 5530(6) A3, Z = 4; 11, empirical formula C36H30Cl4N3O2P2Re, crystal system monoclinic, space group I2/a, a = 16.866(6) A, b = 12.583(6) A, c = 34.78(2) A, beta = 99.22(4) degrees, V = 7285(7) A3, Z = 8.     

Mechanistic insight into hydrosilylation reactions catalyzed by high valent ReX (X = O, NAr, or N) complexes: the silane (Si-H) does not add across the metal-ligand multiple bond

Treatment of oxo and imido-rhenium(V) complexes Re(X)Cl3(PR3)2 (X = O, NAr, and R = Ph or Cy) (1-2) with Et3SiH affords Re(X)Cl2(H)(PR3)2 in high yields. Cycloaddition of silane across the ReX multiple bonds is not observed. Two rhenium(V) hydrides (X = O and R = Ph, 4a; X = NMes and R = Ph, 5a) have been structurally characterized by X-ray diffraction. The kinetics of the reaction of Re(O)Cl3(PPh3)2 (1a) with Et3SiH is characterized by phosphine inhibition and saturation in [Et3SiH]. Hence, formation of Re(O)Cl2(H)(PPh3)2 (4a) proceeds via a sigma-adduct followed by heterolytic cleavage of the Si-H bond and transfer of silylium (Et3Si+) to chloride. Oxo and imido complexes of rhenium(V) (1-2) as well as their nitrido analogues, Re(N)Cl2(PR3)2 (3), catalyze the hydrosilylation of PhCHO under ambient conditions, with the reactivity order imido > oxo > nitrido. The isolable oxorhenium(V) hydride 4a reacts with PhCHO to afford the alkoxide Re(O)Cl2(OCH2Ph)(PPh3)2 (6a) with kinetic dependencies that are consistent with aldehyde coordination followed by aldehyde insertion into the Re-H bond. The latter (6a) regenerates the rhenium hydride upon reaction with Et3SiH. These stoichiometric reactions furnish a possible catalytic cycle. However, quantitative kinetic analysis of the individual stoichiometric steps and their comparison to steady-state kinetics of the catalytic reaction reveal that the observed intermediates do not account for the predominant catalytic pathway. Furthermore, for Re(O)Cl2(H)(PCy3)2 and Re(NMes)Cl2(H)(PPh3)2 aldehyde insertion into the Re-H bond is not observed. Therefore, based on the kinetic dependencies under catalytic conditions, a consensus catalytic pathway is put forth in which silane is activated via sigma-adduct formation cis to the ReX bond followed by heterolytic cleavage at the electrophilic rhenium center. The findings presented here demonstrate the so-called Halpern axiom, the observation of "likely" intermediates in a catalytic cycle, generally, signals a nonproductive pathway.     

Reactivity of rhenium(V) oxo Schiff base complexes with phosphine ligands: rearrangement and reduction reactions

The symmetric rhenium(V) oxo Schiff base complexes trans-[ReO(OH2)(acac2en)]Cl and trans-[ReOCl(acac2pn)], where acac2en and acac2pn are the tetradentate Schiff base ligands N,N'-ethylenebis(acetylacetone) diimine and N,N'-propylenebis(acetylacetone) diimine, respectively, were reacted with monodentate phosphine ligands to yield one of two unique cationic phosphine complexes depending on the ligand backbone length (en vs pn) and the identity of the phosphine ligand. Reduction of the Re(V) oxo core to Re(III) resulted on reaction of trans-[ReO(OH2)(acac2en)]Cl with triphenylphosphine or diethylphenylphosphine to yield a single reduced, disubstituted product of the general type trans-[Re(III)(PR3)2(acac2en)]+. Rather unexpectedly, a similar reaction with the stronger reducing agent triethylphosphine yielded the intramolecularly rearranged, asymmetric cis-[Re(V)O(PEt3)(acac2en)]+ complex. Reactions of trans-[Re(V)O(acac2pn)Cl] with the same phosphine ligands yielded only the rearranged asymmetric cis-[Re(V)O(PR3)(acac2pn)]+ complexes in quantitative yield. The compounds were characterized using standard spectroscopic methods, elemental analyses, cyclic voltammetry, and single-crystal X-ray diffraction. The crystallographic data for the structures reported are as follows: trans-[Re(III)(PPh3)2(acac2en)]PF6 (H48C48N2O2P2Re.PF6), 1, triclinic (P), a = 18.8261(12) A, b = 16.2517(10) A, c = 15.4556(10) A, alpha = 95.522(1) degrees , beta = 97.130(1) degrees , gamma = 91.350(1) degrees , V = 4667.4(5) A(3), Z = 4; trans-[Re(III)(PEt2Ph)2(acac2en)]PF6 (H48C32N2O2P2Re.PF6), 2, orthorhombic (Pccn), a = 10.4753(6) A, b =18.4315(10) A, c = 18.9245(11) A, V = 3653.9(4) A3, Z = 4; cis-[Re(V)O(PEt3)(acac2en)]PF6 (H33C18N2O3PRe.1.25PF6, 3, monoclinic (C2/c), a = 39.8194(15) A, b = 13.6187(5) A, c = 20.1777(8) A, beta = 107.7730(10) degrees , V = 10419.9(7) A3, Z = 16; cis-[Re(V)O(PPh3)(acac2pn)]PF6 (H35C31N2O3PRe.PF6), 4, triclinic (P), a = 10.3094(10) A, b =12.1196(12) A, c = 14.8146(15) A, alpha = 105.939(2) degrees , beta = 105.383(2) degrees , gamma = 93.525(2) degrees , V = 1698.0(3) A3, Z = 2; cis-[Re(V)O(PEt2Ph)(acac2pn)]PF6 (H35C23N2O3PRe.PF6), 5, monoclinic (P2(1)/n), a = 18.1183(18) A, b = 11.580(1) A, c = 28.519(3) A, beta = 101.861(2) degrees , V = 5855.9(10) A(3), Z = 4.     

Synthesis and structure of a series of new d(1)-Aryl imido-vanadium(IV) complexes stabilized by n-donor ligands

A family of new coordination vanadium(IV) compounds supported by a terminal or bridged aryl imido ligand are reported. Reaction of V(NMe(2))(4) with anilines ArNH(2), where Ar = 2,6-i-Pr(2)-C(6)H(3), 2,6-Me(2)-C(6)H(3), Ph, 2,6-Cl(2)-C(6)H(3), and C(6)F(5), afforded the diamagnetic imido-bridged complexes [V(NAr)(NMe(2))(2)](2) (1a-e). Chlorination of 1a-e with trimethylchlorosilane afforded complexes 2a-e formulated as [V(=NAr)Cl(2)(NHMe(2))(x)()](n)(). One-pot reaction of V(NMe(2))(4) with ArNH(2) in the presence of an excess of trimethylchlorosilane gave the five-coordinate compound [V(=NAr)Cl(2)(NHMe(2))(2)] (3a-e). Reaction of 3a-e with pyridine, bipyridine (bipy), or N,N,N',N'-tetramethylethylenediamine (tmeda) gave respectively the six-coordinate tris- or bis(pyridine) adducts [V(=NAr)Cl(2)(Py)(3)] (4a-e) or [V(=NAr)Cl(2)(Py)(2)(NHMe(2))] (5a), bipyridine complexes [V(=NAr)Cl(2)(bipy)(NHMe(2))] (5a-e) and [V(=NAr)Cl(2)(bipy)(Py)] (9a), and tmeda adduct [V(=NAr)Cl(2)(tmeda)(NHMe(2))] (10a). Moreover, five-coordinate complexes free of NHMe(2) ligands, such as [V(=NAr)Cl(2)(Py)(2)] (5a), [V(=NAr)Cl(2)(bipy)] (8a), and [V(=NAr)Cl(2)(tmeda)] (11a), were directly prepared starting from precursors 2a-e. All compounds were totally characterized by spectroscopic methods (IR, (1)H NMR for diamagnetic complexes, and EPR for paramagnetic complexes), elemental analysis, magnetism, and single-crystal X-ray diffraction studies for 1b, 3a, 3d, 4b, 4d, 7c, 10a, and 11a.     

Unusual reactivity of the [Re(V)O]3+ core: syntheses and characterization of novel rhenium halide complexes with n-methyl-o-diaminobenzene

The reactions of 1 or 2 equiv of N-methyl-o-diaminobenzene with trans-[ReOX(3)(PPh(3))(2)] (X = Cl, Br) in refluxing chloroform gave oxo-free rhenium complexes [Re(VI)X(4)(NC(6)H(4)NHCH(3))(OPPh(3))] (X = Cl, 3; X = Br, 6), [Re(V)X(2)Y(NC(6)H(4)NHCH(3))(PPh(3))(2)] (X, Y = Cl, 4; X = Br, Y = Cl, 7), [Re(IV)Cl(2)(NHC(6)H(4)NCH(3))(2)] (5), and [Re(IV)Br(3)(NHC(6)H(4)NCH(3))(PPh(3))] (8). All complexes were characterized by elemental analysis, (1)H NMR and IR spectroscopy, cyclic voltammetry, EPR spectroscopy, and X-ray crystallography. The complexes all display distorted octahedral coordination geometry. For Re(IV) complexes 5 and 8, the ligands coordinate in the benzosemiquinone diimine form. In Re(VI) complexes 3 and 6 and the Re(V) complexes 4 and 7, the ligands coordinate in the dianionic monodentate imido form. The EPR spectra of Re(VI) species 3 and 6 in dichloromethane solution at room temperature exhibit the characteristic hyperfine pattern of six lines, with evidence of strong second-order effects. The IR spectra of the complexes are characterized by Re=N and Re-N stretching bands at ca. 1090 and 540 cm(-)(1), respectively. The Re(IV) and Re(V) complexes display well-resolved NMR spectra, while the Re(VI) complexes exhibit no observable spectra, due to paramagnetism. The cyclic voltammograms of complexes 3 and 6 display Re(VII)/ Re(VI) and Re(VI)/Re(V) processes, those of 4 and 7 exhibit Re(VI)/Re(V) and Re(V)/Re(IV) couples, and those of 5 and 8 are characterized by Re(V)/Re(IV) and Re(IV)/Re(III) processes.     

Sulfinylamine metathesis at oxo metal species--convenient entry into imido metal chemistry

The exchange of terminal metal oxo functionalities by N-organo and N-sulfonylimido functionalities via metathesis with bent, thus very reactive sulfinyl amines R-NSO and sulfinyl sulfonylamides R-SO(2)-NSO is described. It is demonstrated that in many cases sulfinyl amine metathesis offers a more convenient entry into imido complex synthesis than the much better investigated isocyanate metathesis at oxo complexes or condensation reactions with amines and silylated amines. Improved syntheses for some known key compounds and several new complexes of the type [V(NR)Cl(3)] and [M(NR)(2)Cl(2)] (M = Cr, Mo, W) are described. Emphasis is put on the synthesis of formerly unknown base free Lewis acids with electron-withdrawing N-substituents such as haloaryl and sulfonylaryl. Surprisingly, even [CrO(2)Cl(2)] is selectively transformed by sulfinylamines into aryl imido derivatives without any reduction by sulfur dioxide. The molecular structures of novel haloaryl imido complexes [Cr(NAr)(2)Cl(2)] Ar = C(6)F(5) and 2,4,6-Cl(3)C(6)H(2) as determined by X-ray crystallography are reported.     

Synthesis and crystal structure of unprecedented phosphine adducts of d(1)-aryl imido-vanadium(IV) complexes

The reaction of the imido precursor [V(NAr)Cl(2)](n)() (1) (Ar = 2,6-i-Pr(2)C(6)H(3)) with 3 equiv of PMe(2)Ph yields the monomeric complex [V(=NAr)Cl(2)(PMe(2)Ph)(2)] (2). Reacting 1 with 1.5 equiv of dmpe or 1 equiv of dppm affords the dimeric complexes [V(=NAr)Cl(2)(dmpe)](2)(mu-P,P'-dmpe) (3) and [V(=NAr)Cl(2)(dppm)](2) (4), respectively. Complexes 2-4 have been fully characterized by spectroscopic methods, magnetism studies, and X-ray crystallography.     

Synthesis, structure, and characterization of molybdenum(VI) imido complexes with N-salicylidene-2-aminophenol

Diimido complexes of the type Mo(NAr)2Cl2(dme) (dme = 1,2-dimethoxyethane) react with N-salicylidene-2-aminophenol (sapH2) in methanol in the presence of 2 equiv of triethylamine to form complexes with the general formula Mo(NAr)(1,2-OC6H4NH)(sap). The structures of three of these compounds (NAr = 2,6-dimethylphenylimido (1), 2,4,6-trimethylphenylimido (2), 2-tert-butylphenylimido3) have been determined by X-ray crystallography. The coordination sphere around the Mo is a distorted octahedron. The oxygen from the 2-aminophenol is trans to the imido nitrogen, whereas the amido nitrogen and the tridentate sap occupy the four equatorial positions. The Mo-N-C imido linkages have angles of 167.5(2) degrees (1), 163.2(2) degrees (2), and 162.4(1) degrees (3). A precursor complex to the imido-amido complex, Mo(NAr)(sap)(OCH3)2 (4, NAr = 2,4,6-trimethylphenylimido), has been isolated and characterized. Compound 4 reacts with 2-aminophenol to form 2, with 2-aminothiophenol to form Mo(NAr)(1,2-SC6H4NH)(sap) (5), with catechol to form Mo(NAr)(1,2-OC6H4O)(sap) (6), with naphthalene-2,3-diol to form Mo(NAr)(naphthalene-2,3-diolate)(sap) (7), with 1,2-benzenedithiol to form Mo(NAr)(1,2-SC6H4S)(sap) (8), and with 1,2-phenylenediamine to form Mo(NAr)(1,2-HNC6H4NH)(sap) (9). The structures of compounds 5-9 have been determined by X-ray crystallography. With the exception of compound 8, the structures are similar to those of 1,2, and 3, with the bidentate ligand occupying one axial and one equatorial position. In 8, 1,2-benzendithiolate occupies two equatorial positions, and the nitrogen from sap is located trans to the imido nitrogen. All complexes were characterized by 1H NMR spectroscopy, cyclic voltammetry, and UV-vis spectroscopy. When a solution of 4 is exposed to moisture-containing air, MoO2(sap)(CH3OH) (10) is formed. The structure of 10 was also determined.     

Cationic Re(V) oxo complexes with poly(pyrazolyl)borates: synthesis, characterization, and stability

Cationic Re(V) oxo compounds of the type [ReO(OSiMe3)(eta 2-B(pz)4)(L)2]X [X = Cl, L = 4-(NMe2)C5H4N (1), 1-Meimz (1-methylimidazole; 2), 1/2 dmpe (1,2-bis(dimethylphosphino)ethane; 3), py (4a); X = I, L = py (4b)] can be prepared by reacting trans-[ReO2(eta 2-B(pz)4)(L)2] with XSiMe3. In solution, cations 1-4 are reactive species, and those with unidentate nitrogen donor ligands (1, 2, and 4) rearrange into the neutral derivatives [ReO(Cl)(OSiMe3)(eta 2-B(pz)4)(L)] [L = py (5), 4-(NMe2)C5H4N (6), 1-Meimz (7)], which are also reported herein. Compounds 1-3 and 5-7 have been fully characterized by the usual spectroscopic techniques, which in some cases includes X-ray crystallographic analysis (3, 6, and 7). Compound 3 crystallizes from CH2Cl2/n-hexane as yellow crystals with one molecule of CH2Cl2 solvent, and compounds 6 and 7 crystallize from THF/n-hexane as violet and red crystals, respectively, with one molecule of THF solvent in the case of 6. Crystallographic data: 3, orthorhombic space group Pn2(1)a, a = 11.311(2) A, b = 19.135(2) A, c = 15.443(2) A, V = 3342.4(8) A3, Z = 4; 6, triclinic space group P1, a = 8.7179(11) A, b = 12.5724(8) A, c = 17.750(2) A, alpha = 70.454(7) degrees, beta = 77.935(9) degrees, gamma = 77.129(8) degrees, V = 1768.1(3) A3, Z = 2; 7, monoclinic space group P2(1)/c, a = 16.356(2) A, b = 20.384(3) A, c = 17.360(3) A, beta = 106.971(12) degrees, V = 5535.8(14) A3, Z = 8.     

Synthetic, spectroscopic, and structural studies on organoimido molybdenum, tungsten, and rhenium phthalocyanines

Unprecedented imido phthalocyaninato complexes of pentavalent refractory metals [PcM(NR)Cl] (M = Mo, W, Re; R = tBu: 1, 3, 6, Mes: 2, 4, 7 or Ts: 5) have been synthesized by reductive cyclotetramerization of phthalonitrile in the presence of appropriate bis(imido) complexes of Mo, W and Re as templates. While d(1) Mo(V) and W(V) species 1-5 show distinctive EPR spectra corresponding to metal centered radicals with hyperfine coupling of two magnetically non-equivalent nitrogen atoms (4 equatorial and 1 axial N), corresponding d(2) Re(V) compounds 6 and 7 are diamagnetic. [PcMo(NtBu)Cl] 1 crystallizes from 1-chloronaphthalene in the tetragonal space group P4/n. The molecular structure reveals, that the metal center is located above the plane of the equatorial N4 and displaced towards the axial π-donor ligand. Due to the thermodynamic trans effect the Mo-Cl bond trans to the imido group is elongated to about 2.600(2) ?.     

Synthesis and characterization of novel rhenium(V) tetradentate N2O2 Schiff base monomer and dimer complexes

Several rhenium(V) oxo complexes with tetradentate N(2)O(2) Schiff base ligands were synthesized and characterized. The general synthetic procedure involved reaction of [NBu(4)][ReOCl(4)] with a tetradentate Schiff base ligand (L(1) = N,N'-ethylenebis(acetylacetoneimine), (acac(2)en) or L(2) = N,N'-propylenebis(acetylacetoneimine) (acac(2)pn)) in ethanol solution to generate complexes of the form trans-ReOX(L) where X = Cl(-), MeO(-), ReO(4)(-), or H(2)O. The product isolated from the reaction was found to be dependent on the reaction conditions, in particular the presence or absence of water and/or base. The mu-oxo-Re(2)O(3)(L)(2) dimers were synthesized and characterized for chemical and structural comparison to the related monomers. Conversion of the monomer to its dimer analogue was followed qualitatively by spectrophotometry. The complexes were characterized by (1)H and (13)C NMR, UV-vis, and IR spectroscopy, elemental analysis, and single crystal X-ray diffraction. The crystallographic data reported for the structures are as follows: trans-[ReO(OH(2))(acac(2)en)]Cl (H(20)C(12)ClN(2)O(4)Re) 1, triclinic (Ponemacr;), a = 7.2888(6) A, b = 9.8299(8) A, c = 10.8195(9) A, alpha = 81.7670(10) degrees, beta = 77.1510(10) degrees, gamma = 87.6200(10) degrees, V = 747.96(11) A(3), Z = 2; trans-[ReO(OReO(3))(acac(2)en)] (H(18)C(12)N(2)O(7)Re(2)) 2, monoclinic (P2(1)/c), a = 7.5547(4) A, b = 8.7409(5) A, c= 25.7794(13) A, beta = 92.7780(10) degrees, V = 1700.34(16) A(3), Z = 4; trans-[ReOCl(acac(2)pn)] (H(20)C(13)N(2)O(3)ClRe) 3, monoclinic (P2(1)/c), a = 8.1628(5) A, b = 13.0699(8) A, c = 28.3902(17) A, beta = 97.5630(10) degrees, V = 3002.5(3) A(3), Z = 8; trans-[ReO(OMe)(acac(2)pn)] (H(23)C(14)N(2)O(4)Re) 4, monoclinic (P2(1)/c), a = 6.7104(8) A, b = 27.844(3) A, c = 8.2292(9) A, beta = 92.197(2) degrees, V = 1536.4(3) A(3), Z = 4; trans-[mu-oxo-Re(2)O(3)(acac(2)en)(2)] (H(36)C(24)N(4)O(7)Re(2)) 5, monoclinic (P2(1)/n), a = 9.0064(5) A, b = 12.2612(7) A, c = 12.3695(7) A, beta = 90.2853(10) degrees, V = 1365.94(13) A(3), Z = 2; and trans-[mu-oxo Re(2)O(3)(acac(2)pn)(2)] (H(40)C(26)N(4)O(7)Re(2)) 6, monoclinic (P2(1)/n), a = 9.1190(5) A, b = 12.2452(7) A, c = 12.8863(8) A, beta = 92.0510(10) degrees, V = 1438.01(14) A(3), Z = 2.     

Synthesis,crystal structure,and photoelectric properties of Re(CO)(3)ClL (L = 2-(1-ethylbenzimidazol-2-yl)pyridine)

A novel Re(I) complex, Re(CO)(3)ClL (L = 2-(1-ethylbenzimidazol-2-yl)pyridine), has been synthesized and structurally characterized by single-crystal X-ray diffraction analysis. Crystal data for C(17)H(13)ClN(3)O(3)Re: space group, orthorhombic, Pbca; a = 12.713(6) A; b = 15.103(7) A; c = 18.253(8) A; Z = 8. Stable vacuum vapor deposition of the Re complex has been verified by UV-vis and infrared spectroscopy. A two-layer electroluminescent device with configuration of ITO/TPD/Re(CO)(3)ClL/Mg(0.9)Ag(0.1)/Ag has been fabricated, which gave a turn-on voltage of as low as 3 V and a maximum luminance of 113 cd/m(2) at a bias voltage of 10.5 V, and confirmed that the Re complex can function as a bright orange-red emitter and an electron transport material in an electroluminescent device.     

Conversion of a Re(IV) tetrahedral cluster to a Re(III) octahedral cluster: synthesis of [(CH3)C(NH2)(2)](4)[Re(6)Se(8)(CN)(6)] by a solvothermal route

The compound [(CH(3))C(NH(2))(2)](4)[Re(6)Se(8)(CN)(6)] has been synthesized by the reaction at 200 degrees C for 3 days of Re(4)Te(4)(TeCl(2))(4)Cl(8), KSeCN, and NH(4)Cl in superheated acetonitrile. This compound crystallizes in the space group C2/c of the monoclinic system with four formula units in a cell of dimensions a = 20.3113(14) A, b = 10.1332(7) A, c = 19.9981(14) A, beta = 106.754(1) degrees, V = 3941.3(5) A(3) (T = 153 K). The [Re(6)Se(8)(CN)(6)](4-) anion comprises an Re(6) octahedron face capped by mu(3)-Se atoms, with each Re atom liganded by a CN group. The anions and cations are connected by an extensive network of hydrogen bonds. The conversion of a Re(IV) tetrahedral cluster to a Re(III) octahedral cluster appears to be unprecedented.     

Emission and metal- and ligand-centered-redox characteristics of the hexarhenium(III) clusters trans- and cis-[Re6(mu 3-S)8Cl4(L)2]2-, where L is a pyridine derivative or pyrazine

Preparations of a series of face-capped octahedral hexarhenium(III) clusters having two N-heterocyclic ligands, [Bu4N]2[trans-[Re6(mu 3-S)8Cl4(L)2]] (Bu4N+ = tetra-n-butylammonium cation; L = pyrazine (1a), 4,4'-bipyridine (3a), 4-methylpyridine (5a), 4-(dimethylamino)pyridine (6a)) and their cis analogues (1b, 3b, 5b, and 6b, respectively), and their electrochemical and photophysical properties have been reported. An X-ray crystal structure determination has been carried out for 1a to confirm the trans configuration (C40H80N6S8Cl4Re6, orthorhombic, space group Cmca (No. 64), a = 19.560(5) A, b = 19.494(4) A, c = 18.592(4) A, beta = 115.76(2) degrees, Z = 4). The redox potential of the reversible ReIII6/ReIII5ReIV process of these complexes and previously reported [Bu4N]2[trans- and cis-[Re6(mu 3-S)8Cl4(4-cyanopyridine)2]] (2a and 2b, respectively) and [Bu4N]2[trans- and cis-[Re6(mu 3-S)8Cl4(pyridine)2]] (4a and 4b, respectively) in acetonitrile depends linearly on the pKa of the N-heterocyclic ligands, with the potentials being more negative with basic ligands. The ligand-centered-redox waves for 1a, 1b, 2a, and 2b were observed as split waves (delta E1/2 = 90-140 mV), the extent of the splitting being larger for the cis isomer and largest for the pyrazine complexes. Electronic interaction between the two ligands through the [Re6(mu 3-S)8]2+ core has been suggested. The second ligand-reduction wave was also observed for 3a and 3b, the potential being shifted positively to coalesce with the first reduction wave on addition of the weak proton donor imidazole. This is accounted for by the proton-coupled redox reaction at the free pyridyl site of the 4,4'-bipyridine ligands. All of the complexes show luminescence in acetonitrile at room temperature. While the complexes of pyridine and 4-methylpyridine show photophysical characteristics (lambda em 740-750 nm, phi em 0.031-0.057, tau em 4.2-6.2 microseconds) similar to those (770 nm, 0.039, and 6.3 microseconds, respectively) of [Re6(mu 3-S)8Cl6]4-, emissions of other complexes are significantly weak with lambda em, phi em, and tau em values in the ranges 763-785 nm, 0.0010-0.0017, and 0.013-0.029 microsecond, respectively. Suggestions are given for the excited states localized on the cluster core and the ligand pi* orbitals.     

Synthesis and characterization of heavier dioxouranium(VI) dihalides

The synthesis and characterization of the dioxouranium(VI) dibromide and iodide hydrates, UO(2)Br(2)x3H(2)O (1), [UO(2)Br(2)(OH(2))(2)](2) (2), and UO(2)I(2)x2H(2)Ox4Et(2)O (3), are reported. Moreover, adducts of UO(2)I(2) and UO(2)Br(2) with large, bulky OP(NMe(2))(3) and OPPh(3) ligands such as UO(2)I(2)(OP(NMe(2))(3))(2) (4), UO(2)Br(2)(OP(NMe(2))(3))(2) (5), and UO(2)I(2)(OPPh(3))(2)(6) are discussed. The structures of the following compounds were determined using single-crystal X-ray diffraction techniques: (1) monoclinic, P2(1)/c, a = 9.7376(8) A, b = 6.5471(5) A, c = 12.817(1) A, beta = 94.104(1) degrees , V = 815.0(1) A(3), Z = 4; (2) monoclinic, P2(1)/c, a = 6.0568(7) A, b = 10.5117(9) A, c = 10.362(1) A, beta = 99.62(1) degrees , V = 650.5(1) A(3), Z = 2; (4) tetragonal, P4(1)2(1)2, a = 10.6519(3) A, b = 10.6519(3) A, c = 24.0758(6) A, V = 2731.7(1) A(3), Z = 4; (5) tetragonal, P4(1)2(1)2, a = 10.4645(1) A, b = 10.4645(1) A, c = 23.7805(3) A, V = 2604.10(5) A(3), Z = 4, and (6) monoclinic, P2(1)/c, a = 9.6543(1) A, b = 18.8968(3) A, c = 10.9042(2) A, beta =115.2134(5) degrees , V = 1783.01(5) A(3), Z = 2. Whereas 1 and 2 are the first UO(2)Br(2) hydrates and the last missing members of the UO(2)X(2) hydrate (X = Cl --> I) series to be structurally characterized, 4 and 6 contain room-temperature stable U(VI)-I bonds with 4 being the first structurally characterized room temperature stable U(VI)-I compound which can be conveniently prepared on a gram scale in quantitative yield. The synthesis and characterization of 5 using an analogous halogen exchange reaction to that used for the preparation of 4 is also reported.