Separation of "light fluorous" reagents and catalysts by fluorous solid-phase extraction: synthesis and study of a family of triarylphosphines bearing linear and branched fluorous tags

Practical syntheses of new triarylphosphines bearing both linear and branched fluorous tags (Rf) are reported. The phosphines have one, two, or all three aryl rings bearing fluorous tags: (Ph)(3)(-)(n)()P(C(6)H(4)(CH(2))(m)()Rf)(n)(). Fluorous-organic partition coefficients have been measured and the retention properties of both the phosphines and the derived phosphine oxides on fluorous reverse phase silica have been studied. While applications relying on liquid-liquid extractive separations of these phosphines may be limited to those bearing three fluorous chains, the technique of solid phase extraction should be broadly applicable to phosphines, phosphine oxides, and derived metal complexes. A parallel platinum-catalyzed allylation of aldehydes with fluorous allyl stannanes illustrates the usefulness of the new fluorous ligands in small-scale synthesis.     

Parallel synthesis and study of fluorous biphasic partition coefficients of 1H,1H,2H,2H-perfluoroalkylsilyl derivatives of triphenylphosphine: a statistical approach

A library of fluorous, (1H,1H,2H,2H-perfluoroalkyl)silyl-substituted derivatives of triphenylphosphine, Ph(3-a)P[C(6)H(5-y)[SiMe(3-b)(CH(2)CH(2)C(x)F(2x+1))(b)](y)-pos](a) [a = 1-3; b = 1-3; x = 4, 6, 8, or 10; pos = 3, 4 (y = 1) or 3,5 (y = 2)], was prepared using parallel synthetic techniques. Upon variation of these four parameters, a total of 108 different fluorous phosphines can be synthesized. Using factorial design, 37 phosphines were selected and their partition coefficients in the typical fluorous biphasic solvent system PFMCH/toluene (PFMCH = perfluoromethylcyclohexane) determined. By fitting of the partition coefficient data to linear functions of the parameters a, b, and x, the partition coefficients of the remaining 71 fluorous phosphines, which were not prepared, could be predicted. Using this approach, some unexpected trends in the dependence of the partition coefficient on variations of the four parameters became clear, resulting in a better understanding of the optimum fluorous substitution pattern for obtaining the highest partition coefficient (P). In this way, the partition coefficient was increased by 2 orders of magnitude, i.e., from the initial value P = 7.8 for 1(3, 2, 6, C4) to P > 238 for 1(2, 3, 6, C3C5). Para- and 3,5-substituted phosphines showed irregular behavior in the sense that elongation or increase of the number of perfluoroalkyl tails did not necessarily lead to higher partition coefficients. Particularly high values were found for phosphines containing a total of 72 fluorinated carbon atoms on the meta position(s) of the aryl rings. Linear relationships were found between the predicted log P of 1(a, b, x, C4) and the experimentally determined log P values of fluorous diphosphines [CH(2)P[C(6)H(4)(SiMe(3-b)(CH(2)CH(2)C(6)F(13))(b))-4](2)](2) and monophosphines Ph(3-a)P(C(6)H(4)(CH(2)CH(2)C(6)F(13))-4)(a). One of the most fluorophilic phosphines, i.e., 1(3, 1, 8, C3C5), was applied and efficiently recycled in rhodium-catalyzed, fluorous hydrosilylation of 1-hexene by HSiMe(2)Ph using PFMCH as the fluorous phase and the substrates as the organic phase. It was demonstrated that a higher partition coefficient of the ligand in PFMCH/toluene at 0 degrees C indeed resulted in less leaching of both the catalyst and the free ligand during phase separation.     

Light, medium, and heavy fluorous triarylphosphines exhibit comparable reactivities to triphenylphosphine in typical reactions of triarylphosphines

[reaction: see text] The relative reactivities of triphenylphosphine (PPh(3)) and three fluorous triarylphosphines [(p-R(F)(CH(2))(2)C(6)H(4))(n)PPh(3)(-)(n), where n = 1-3] have been compared in internal competition experiments. Product ratios were determined by (31)P NMR spectroscopy. The four phosphines have about the same reactivities in oxidation, alkylation, and Staudinger reactions and give comparable yields in a preparative Mitsunobu reaction. Previously observed rate and yield differences in Staudinger reactions of the fluorous phosphines are attributed to solubility effects, not reactivity differences. A light fluorous phosphine [(p-C(8)F(17)(CH(2))(2)C(6)H(4))PPh(2)] outperforms a commercially available resin-bound phosphine in a competitive benzylation experiment by a factor of about 4.     

Fluorous phase-transfer activation of catalysts: application of a new rate-enhancement strategy to alkene metathesis

Reactions of the bis(pyridine) complex (H2IMes)(Py)2(Cl)2Ru(=CHPh) and fluorous phosphines P(CH2CH2R(fn))3 (n = a, 6; b, 8; c, 10; R(fn) = (CF2)(n-1)CF3) give (H2IMes)(P(CH2CH2R(fn))3)(Cl)2Ru(=CHPh) (2a-c, 64-73%), which are analogs of Grubbs' second generation catalyst and effective alkene metathesis catalysts under organic monophasic and fluorous/organic biphasic conditions. The latter give rate accelerations, which are believed to arise from phase transfer of the dissociated fluorous phosphine.     

1H,1H,2H,2H-perfluoroalkyl-functionalization of Ni(II), Pd(II), and Pt(II) mono- and diphosphine complexes: minimizing the electronic consequences for the metal center

A series of fluorous derivatives of group 10 complexes MCl(2)(dppe) and [M(dppe)(2)](BF(4))(2) (M = Ni, Pd or Pt; dppe = 1,2-bis(diphenylphosphino)ethane) and cis-PtCl(2)(PPh(3))(2) was synthesized. The influence of para-(1H,1H,2H,2H-perfluoroalkyl)dimethylsilyl-functionalization of the phosphine phenyl groups of these complexes, as studied by NMR spectroscopy, cyclovoltammetry (CV), XPS analyses, as well as DFT calculations, points to a weak steric and no significant inductive electronic effect. The steric effect is most pronounced for M = Ni and leads in the case of NiCl(2)(1c) (3c) and [Ni(1c)(2)](BF(4))(2) (7c) (1c = [CH(2)P[C(6)H(4)(SiMe(2)CH(2)CH(2)C(6)F(13))-4](2)](2)) to a tetrahedral distortion from the expected square planar geometry. The solubility behavior of NiCl(2)[CH(2)P[C(6)H(4)(SiMe(3-b)(CH(2)CH(2)C(x)F(2x+1)b)-4](2)](2) (3: b = 1-3; x = 6, 8) in THF, toluene, and c-C(6)F(11)CF(3) was found to follow the same trends as those observed for the free fluorous ligands 1. A similar correlation between the partition coefficient (P) of complexes 3 and free 1 was observed in fluorous biphasic solvent systems, with a maximum value obtained for 3f (b = 3, x = 6, P = 23 in favor of the fluorous phase).     

The synthesis, structure and dynamic behaviour of disubstituted alkenylphosphine derivatives of [Rh6(CO)16

A series of [Rh(6)(CO)(16)] substituted derivatives containing Ph(2)P(alkenyl) ligands has been synthesized starting from the [Rh(6)(CO)(16-x)(NCMe)(x)](x= 1, 2) clusters and Ph(2)P((CH(2))(n)CH=CH(2))(n= 2, 3) phosphines. It was shown that the terminal alkenyl substituents in these phosphines easily undergo isomerization in the coordination sphere of the hexarhodium complexes to give the allyl -CH(2)CH=C(H)R (R = Me and Et) fragments coordinated through the double bond of the rearranged organic moieties. The solid-state structure of two clusters, [Rh(6)(CO)(14)(mu2,kappa3-Ph(2)PCH(2)CH=C(H)CH(3))](4) and [Rh(6)(CO)(14)(mu2,kappa3-Ph(2)PCH(2)CH=C(H)CH(2)CH(3))](8), was established by X-ray crystallography. Solution structures of the products obtained were also characterized by IR and NMR ((1)H, (31)P, (1)H-(1)H COSY and (1)H-(1)H NOE) spectroscopy. It was shown that 4 and 8 exist in solution as mixtures of three isomers (A, B and C), which differ in the conformation of the coordinated allyl fragment. A similar (two species, A and B) equilibrium was found to occur in the solution of the [Rh(6)(CO)(14)(mu2,kappa3-Ph(2)PCH(2)CH=CH(2))](2) cluster. The dynamic behaviour of 2, 4 and 8[Rh(6)(CO)(14)(mu2,kappa3-Ph(2)PCH=CH(2))] has been studied using VT (31)P and (1)H-(1)H NOESY NMR spectroscopy, rate constants and activation parameters of the (A<-->B) isomerization processes were determined. It was shown that the most probable mechanism of this isomerization involves a dissociative [Rh6(CO)(14)(kappa1-Ph(2)P(alkenyl))] intermediate and re-coordination of the double bond to the same metal atom where the process started from. The conversion of the A and B species in and into the third isomer very likely occurs through the transfer of an allyl hydrogen atom onto the rhodium skeleton to give eventually cis conformation of the coordinated allyl fragment.     

Synthesis and redox properties of crowded triarylphosphines possessing ferrocenyl groups

Crowded triarylphosphines possessing ferrocenyl groups [(4-ferrocenyl-2,6-diisopropylphenyl)(n)(2,4,6-triisopropylphenyl)(3-n)P (5a, n = 1; 5b, n = 2; 5c, n = 3)] were synthesized by the reaction of the corresponding arylcopper(I) reagents with the diarylchlorophosphines. Structures of the triarylphosphines were studied by 1H, 13C, and 31P NMR spectroscopies, and the characteristic patterns of the proton signals of the 2,6-isopropyl groups and upfielded 31P chemical shifts suggest structural similarities of the triarylphosphine moiety to the previously reported tris(2,4,6-triisopropylphenyl)phosphine (2). X-ray crystallography of 5c also revealed that the structure around the phosphorus is similar to that of 1, where the average bond angle and length around the phosphorus atom are 110.8 degrees and 1.854 A, respectively. According to the electrochemical measurements, phosphines 5a, 5b, and 5c are reversibly oxidized in two, three, and four steps, respectively, which suggests significant electronic interaction among the triarylphosphine and the ferrocene redox centers as well as weak interaction among the ferrocene redox centers. The EPR spectra obtained at cryogenic temperature after oxidation of phosphines 5a, 5b, and 5c are superpositions of those for the cation radicals of the crowded triarylphosphine and ferricinium. The solution spectra obtained at 293 K, which consist of two lines typical of the cation radical of the crowded triarylphosphines, become weaker as the number of the ferrocenyl groups increases and the cation radical of 5c does not show EPR signals. These findings suggest not only instability of the tetra(cation radical) of 5c but also the course of oxidation where the ferrocenyl groups in the periphery of the molecules are oxidized at first.     

Catalytic P--H activation by Ti and Zr catalysts

Catalytic dehydrocoupling of phosphines was investigated using the anionic zirconocene trihydride salts [Cp*2Zr(mu-H)3Li]3 (1 a) or [Cp*2Zr(mu-H)3K(thf)4] (1 b), and the metallocycles [CpTi(NPtBu3)(CH2)4] (6) and [Cp*M(NPtBu3)(CH2)4] (M=Ti 20, Zr 21) as catalyst precursors. Dehydrocoupling of primary phosphines RPH2 (R=Ph, C6H2Me3, Cy, C10H7) gave both dehydrocoupled dimers RP(H)P(H)R or cyclic oligophosphines (RP)n (n=4, 5) while reaction of tBu3C6H2PH2 gave the phosphaindoline tBu2(Me2CCH2)C6H2PH 9. Stoichiometric reactions of these catalyst precursors with primary phosphines afforded [Cp*2Zr((PR)2)H][K(thf)4] (R=Ph 2, Cy 3, C6H2Me3 4), [Cp*2Zr((PPh)3)H][K(thf)4] (5), [CpTi(NPtBu3)(PPh)3] (7) and [CpTi(NPtBu3)(mu-PHPh)]2 (8), while reaction of 6 with (C6H2tBu3)PH2 in the presence of PMe3 afforded [CpTi(NPtBu3)(PMe3)(P(C6H2tBu3)] (10). The secondary phosphines Ph2PH and (PhHPCH2)2CH2 also undergo dehydrocoupling affording (Ph2P)2 and (PhPCH2)2CH2. The bisphosphines (CH2PH2)2 and C6H4(PH2)2 are dehydrocoupled to give (PCH2CH2PH)2)(12) and (C6H4P(PH))2 (13) while prolonged reaction of 13 gave (C6H4P2)(8) (14). The analogous bisphosphine Me2C6H4(PH)2 (17) was prepared and dehydrocoupling catalysis afforded (Me2C6H2P(PH))2 (18) and subsequently [(Me2C6H2P2)2(mu-Me2C6H2P2)]2 (19). Stoichiometric reactions with these bisphosphines gave [Cp*2Zr(H)(PH)2C6-H4][Li(thf)4] (22), [CpTi(NPtBu3)(PH)2C6H4]2 (23) and [Cp*Ti(NPtBu3)(PH)2C6H4] (24). Mechanistic implications are discussed.     

How to insulate a reactive site from a perfluoroalkyl group: photoelectron spectroscopy, calorimetric, and computational studies of long-range electronic effects in fluorous phosphines P((CH(2))(m)(CF(2))(7)CF(3))(3)

This study advances strategy and design in catalysts and reagents for fluorous and supercritical CO(2) chemistry by defining the structural requirements for insulating a typical active site from a perfluoroalkyl segment. The vertical ionization potentials of the phosphines P((CH(2))(m)R(f8))(3) (m = 2 (2) to 5 (5)) are measured by photoelectron spectroscopy, and the enthalpies of protonation by calorimetry (CF(3)SO(3)H, CF(3)C(6)H(5)). They undergo progressively more facile (energetically) ionization and protonation (P(CH(2)CH(3))(3) > 5 > 4 approximately equal to P(CH(3))(3) > 3 > 2), as expected from inductive effects. Equilibrations of trans-Rh(CO)(Cl)(L)(2) complexes (L = 2, 3) establish analogous Lewis basicities. Density functional theory is used to calculate the structures, energies, ionization potentials, and gas-phase proton affinities (PA) of the model phosphines P((CH(2))(m)()CF(3))(3) (2'-9'). The ionization potentials of 2'-5' are in good agreement with those of 2-5, and together with PA values and analyses of homodesmotic relationships are used to address the title question. Between 8 and 10 methylene groups are needed to effectively insulate a perfluoroalkyl segment from a phosphorus lone pair, depending upon the criterion employed. Computations also show that the first carbon of a perfluoroalkyl segment exhibits a much greater inductive effect than the second, and that ionization potentials of nonfluorinated phosphines P((CH(2))(m)CH(3))(3) reach a limit at approximately nine carbons (m = 8).     

Polyfluorinated quaternary ammonium salts of polyoxometalate anions: fluorous biphasic oxidation catalysis with and without fluorous solvents

[reaction: see text] Polyfluorinated quaternary ammonium cations, [CF(3)(CF(2))(7)(CH(2))(3)](3)CH(3)N(+) (R(F)N(+)), were synthesized and used as countercations for the [WZnM(2)(H(2)O)(2)(ZnW(9)O(34))(2)](12)(-) (M = Mn(II), Zn(II)) polyoxometalate. The (R(F)N(+))(12)[WZnM(2)(H(2)O)(2)(ZnW(9)O(34))(2)] compounds were fluorous biphasic catalysts for alcohol and alkenol oxidation, and alkene epoxidation with aqueous hydrogen peroxide. Reaction protocols with or without a fluorous solvent were tested. The catalytic activity and selectivity was affected by both the hydrophobicity of the solvent and the substrate.     

Synthesis, structure, and reactivity of fluorous phosphorus/carbon/phosphorus pincer ligands and metal complexes

Reactions of the diphosphine 1,3-C6H4(CH2PH2)2 and fluorous alkenes H2C=CHR(fn)(R(fn)=(CF2)(n-1)CF3; n = 6, 8) at 75 degrees C in the presence of AIBN give the title ligands 1,3-C6H4(CH2P(CH2CH2R(fn))2)2(3-R(fn)) and byproducts 1,3-C6H4(CH3)(CH2P(CH2CH2R(fn))2)(4-R(fn)) in 1 : 3 to 1 : 5 ratios. Workups give -R(fn) in 4--17% yields. Similar results are obtained photochemically. Reaction of 1,3-C6H4(CH2Br)2 and HP(CH2CH2R(f8))2 (5) at 80 degrees C (neat, 1 : 2 mol ratio) gives instead of simple substitution the metacyclophane [1,3-C6H4(CH2P(CH2CH2R(f8))2 CH2-1,3-C(6)H(4)CH(2)P[lower bond 1 end](CH2CH2R(f8))2C[upper bond 1 end]H2](2+)2Br-, which upon treatment with LiAlH(4) yields 3-R(f8)(20%), 4-R(f8), and other products. Efforts to better access 3-R(f8), either by altering stoichiometry or using various combinations of the phosphine borane (H3B)PH(CH2CH2R(f8))2 and base, are unsuccessful. Reactions of 3-R(fn) with Pd(O2CCF3)2 and [IrCl(COE)2]2(COE=cyclooctene) give the palladium and iridium pincer complexes (2,6,1-C6H3(CH2 P(CH2CH2R(fn))(2)(2)Pd(O2CCF3)(10-R(fn); 80-90%) and (2,6,1-C6H3(CH2P(CH2CH2R(f8))2)2)Ir(Cl)(H)(11-R(f8); 29%), which exhibit CF3C6F(11)/toluene partition coefficients of >96 : <4. The crystal structure of 10-R(f8) shows CH2CH2R(f8) groups with all-anti conformations that extend in parallel above and below the palladium square plane to create fluorous lattice domains. NMR monitoring shows a precursor to 11-R(f8) that is believed to be a COE adduct.     

Structural diversity of the oxovanadium organodiphosphonate system: a platform for the design of void channels

The hydrothermal reactions of a vanadium source, an appropriate diphosphonate ligand, and water in the presence of HF provide a series of compounds with neutral V-P-O networks as the recurring structural motif. When the {O3P(CH2)(n)PO3}4- diphosphonate tether length n is 2-5, metal-oxide hybrids of type 1, [V2O2(H2O){O3P(CH2)(n)PO3}] x xH2O, are isolated. The type 1 oxides exhibit the prototypical three-dimensional (3-D) "pillared" layer architecture. When n is increased to 6-8, the two-dimensional (2-D) "pillared" slab structure of the type 2 oxides [V2O2(H2O)4{O3P(CH2)6PO3}] is encountered. Further lengthening of the spacer to n = 9 provides another 3-D structure, type 3, constructed from the condensation of pillared slabs to give V-P-O double layers as the network substructure. When organic cations are introduced to provide charge balance for anionic V-P-O networks, oxides of types 4-7 are observed. For spacer length n = 3, a range of organodiammonium cations are accommodated by the same 3-D "pillared" layer oxovanadium diphosphonate framework in the type 4 materials [H3N(CH2)(n)NH3][V4O4(OH)2 {O3P(CH)3PO3}2] x xH2O [n = 2, x = 6 (4a); n = 3, x = 3 (4b); n = 4, x = 2 (4c); n = 5, x = 1 (4d); n = 6, x = 0.5 (4e); n = 7, x = 0 (4f)] and [H3NR]y[V4O4(OH)2 {O3P(CH)3PO3}2] x xH2O [R = -CH2(NH3)CH2CH3, y = 1, x = 0 (4g); R = -CH3, n = 2, x = 3 (4h); R = -CH2CH3, y = 2, x = 1 (4i); R = -CH2CH2CH3, y = 2, x = 0 (4j); cation = [H2N(CH2CH3)2], y = 2, x = 0 (4k)]. These oxides exhibit two distinct interlamellar domains, one occupied by the cations and the second by water of crystallization. Furthermore, as the length of the cation increases, the organodiammonium component spills over into the hydrophilic domain to displace the water of crystallization. When the diphosphonate tether length is increased to n = 5, structure type 5, [H3N(CH2)2NH3][V4O4(OH)2(H2O){O3P(CH2)5PO3}2] x H2O, is obtained. This oxide possesses a 2-D "pillared" network or slab structure, similar in gross profile to that of type 2 oxides and with the cations occupying the interlamellar domain. In contrast, shortening the diphosphonate tether length to n = 2 results in the 3-D oxovanadium organophosphonate structure of the type 7 oxide [H3N(CH2)5NH3][V3O3{O3P(CH2)2PO3}2]. The ethylenediphosphonate ligand does not pillar V-P-O networks in this instance but rather chelates to a vanadium center in the construction of complex polyhedral connectivity of 7. Substitution of piperazinium cations for the simple alkyl chains of types 4, 5, and 7 provides the 2-D pillared layer structure of the type 6 oxides, [H2N(CH2CH2)NH2][V2O2{O3P(CH)(n)PO3H}2] [n = 2 (6a); n = 4 (6b); n = 6 (6c)]. The structural diversity of the system is reflected in the magnetic properties and thermal behavior of the oxides, which are also discussed.     

Strain-controlled, photochemically, or thermally promoted haptotropic shifts of cyclopentadienyl ligands in group 8 metallocenophanes

Cyclopentadienyl (Cp) ligands in moderately strained [1]- and [2]ferrocenophanes [Fe{(eta5-C5H4)2(ERx)y}: Fe{(eta5-C5H4)2SiMe2} (1), Fe{(eta5-C5H4)CH2}2 (10)] and highly strained [2]ruthenocenophanes [Ru{(eta5-C5H4)CR2}2 {R = H (15), Me (16)}] are susceptible to partial substitution by P donors and form mixed-hapticity metallocycles-[M(L2){(eta5-C5H4)(ERx)y(eta1-C5H4)}]: [Fe(dppe){(eta5-C5H4)SiMe2(eta1-C5H4)}] (5), [Fe(dmpe){(eta5-C5H4)SiMe2(eta1-C5H4)}] (6), [Fe(dmpe){(eta5-C5H4)(CH2)2(eta1-C5H4)}] (11), [Ru(dmpe){(eta5-C5H4)(CH2)2(eta1-C5H4)}] (17), [Ru(dmpe){(eta5-C5H4)(CMe2)2(eta1-C5H4)}] (18), and [Ru(PMe3)2{(eta5-C5H4)(CH2)2(eta1-C5H4)}] (19)-through haptotropic reduction of one eta5-, pi-bound Cp to eta1, sigma-coordination. These reactions are strain-controlled, as highly ring-tilted [2]ruthenocenophanes 15 and 16 [tilt angles (alpha) approximately 29-31 degrees ] react without irradiation to form thermodynamically stable products, while moderately strained [n]ferrocenophanes 1 and 10 (alpha approximately 19-22 degrees ) require photoactivation. The iron-containing photoproducts 5 and 11 are metastable and thermally retroconvert to their strained precursors and free phosphines at 70 degrees C. In contrast, the unprecedented ring-opening polymerization (ROP) of the essentially ring-strain-free adduct 6 to afford poly(ferrocenyldimethylsilane) [Fe(eta5-C5H4)2SiMe2]n (Mw approximately 5000 Da) was initiated by the thermal liberation of small amounts of P donor. Unlike reactions with bidentate analogues, monodentate phosphines promoted photolytic ROP of ferrocenophanes 1 and 10. MALDI-TOF analysis suggested a cyclic structure for the soluble poly(ferrocenyldimethylsilane), 8-cyclic, produced from 1 in this manner. While the polymer likewise produced from 10 was insoluble, the initiation step in the ROP process was modeled by isolation of a tris(phosphine)-substituted ring-opened ferrocenophane [Fe(PMe3)3{(eta5-C5H4)(CH2)2(C5H5)}][OCH2CH3] (13[OCH2CH3]) generated by irradiation of 10 and PMe3 in a protic solvent (EtOH). Studies of the cation 13 revealed that the Fe center reacts with a Cp- anion with loss of the phosphines to form [Fe(eta5-C5H5){(eta5-C5H4)(CH2)2(C5H5)}] (14) under conditions identical to those of the ROP experiments, confirming the likelihood of "back-biting" reactions to yield cyclic structures or macrocondensation to produce longer chains.     

Water-Soluble Phosphines. 6.(1) Tailor-Made Syntheses of Chiral Secondary and Tertiary Phosphines with Sulfonated Aromatic Substituents: Structural and Quantum Chemical Studies

Chiral water-soluble secondary phosphines (2-6) were obtained by nucleophilic phosphination of FC(6)H(4)-4-SO(3)K (1a), FC(6)H(3)-2,4-(SO(3)K)(2) (1b), and FC(6)H(4)-2-SO(3)K (1c) with RPH(2) (R = Ph, 2,4,6-Me(3)C(6)H(2), 2,4,6-iPr(3)C(6)H(2)) in the superbasic medium DMSO/KOH by employing steric control of substitution at phosphorus by bulky substituents R and sulfonic groups in the ortho position of the aromatic ring systems in 1b or 1c. The secondary phosphines may be deprotonated in DMSO/KOH to give phosphido anions which on reaction with alkyl halides (PhCH(2)Cl, Br(CH(2))(3)Br, and C(12)H(25)Br) yield mono- or bidentate tertiary phosphines (7-10). Ligands of this type are alternatively accessible by nucleophilic arylation of secondary phosphines, e.g. Ph(Me)PH or Ph(H)P(CH(2))(3)P(H)Ph with 1a or 1b, respectively. The crystal structure of the starting material 1b.H(2)O (space group P2(1)/m) has been determined. In the solid state of 1b.H(2)O the individual molecules are interconnected by ionic interactions between the potassium cations and the SO(3)(-) anions. The C-F bond (C(1)-F 1.347(4) ?) is shorter than that in C(6)H(5)F (1.356(4) ?). The unit cell of 7a.0.5H(2)O (space group P&onemacr;), the first structurally characterized chiral phosphine with a sulfonated phenyl substituent, contains the two enantiomers. Due to the asymmetrical substitution at phosphorus the PC(3) skeletons are significantly distorted (P(1)-C(1,11,31) 1.864(10), 1.825(8), 1.841(7) ?). The electronic structure of sulfonated fluorobenzenes FC(6)H(5)(-)(n)()(SO(3)M)(n)() (M = K, NH(4), n = 1-3) is discussed on the basis of quantum chemical calculations. In particular, the reactivity difference toward nucleophilic phosphination within the series is rationalized in terms of steric factors and of the -I effect of the sulfonic groups.     

"Heavy fluorous" cyclopentadienes and cyclopentadienyl complexes with three to five ponytails: facile syntheses from polybromocyclopentadienyl complexes, phase properties, and electronic effects

The reactions between [(eta5-C5H(5-x)Br(x))M(CO)3] (M = Re, Mn; x = 1, 3, 4, 5) and [IZn[(CH2)(n)R(f8)]] (n = 2, 3; R(f8) = (CF2)7CF3) in the presence of [Cl2PdL2] catalysts give the title complexes [[eta5-C5H(5-x)[(CH2)(n)R(f8)]x]M(CO)3]. In the case of x = 5, the major product is actually [[eta5-C5H[(CH2)(n)R(f8)]4]M(CO)3], in which one of the bromides has been substituted by hydride. Minor amounts of multiple hydride substitution products are formed, all of them readily separable on fluorous silica gel. Irradiation of the manganese complexes in CF3C6H5/MeOH/ether gives uncoordinated cyclopentadienes, which can be deprotonated and reattached to other metals. Partition coefficients have been measured (CF3C6F11/toluene): complexes with three or more ponytails are highly fluorophilic, with values of > 99.8: < 0.2. The IR [symbol: see text]CO bands have been used to probe the inductive effects of the ponytails at the metal centers.     

Chemical functionality of poly(methylenephosphine): phosphine-borane adducts and methylphosphonium ionomers

The chemical functionality of poly(methylenephosphine) n-Bu[MesP-CPh(2)](n)H () is examined in reactions with two isoelectronic species, namely BH(3) and CH(3)(+). The potential reactivity of polymer is modelled by examining the reactivity of molecular phosphines bearing similar substituents as the polymer. In particular, the phosphine-borane adducts Mes(Me)P(BH(3))-CPh(2)H () and Mes(Me)P(BH(3))-CPh(2)SiMe(2)H () are prepared from the reaction of BH(3).SMe(2) with Mes(Me)P-CPh(2)H () or Mes(Me)P-CPh(2)SiMe(2)H (), respectively. Treating with MeOTf affords the methylated model compound, [Mes(Me)(2)P-CPh(2)H]OTf (). X-Ray crystal structures are reported for each model compound. The reaction of n-Bu[MesP-CPh(2)](n)H (M(n) = 3.89 x 10(4), PDI = 1.34) with BH(3).SMe(2) affords the phosphine-borane polymer n-Bu[MesP(BH(3))-CPh(2)](n)H () (M(n) = 4.13 x 10(4), PDI = 1.26). In contrast, methylation of phosphine polymer gives n-Bu[MesP-CPh(2)](x)-/-[MesP(Me)-CPh(2)](y)H.(OTf)(y) () where approximately 50% of the phosphine moieties are methylated (from (31)P NMR).     

Organic-inorganic hybrid materials: hydrothermal syntheses and structural characterization of bimetallic organophosphonate oxides of the type Mo/Cu/O/RPO(3)(2-)/organoimine

The hydrothermal reactions of a Cu(II) starting material, a molybdate source, 2,2'-bipyridine or terpyridine, and the appropriate alkyldiphosphonate ligand yield two series of bimetallic organophosphonate hybrid materials of the general types [Cu(n)(bpy)(m)Mo(x)O(y)(H(2)O)(p)[O(3)P(CH(2))(n)PO(3)](z)] and [Cu(n)(terpy)(m)Mo(x)O(y)(H(2)O)(p)[O(3)P(CH(2))(n)PO(3)](z)]. The bipyridyl series includes the one-dimensional materials [Cu(bpy)(MoO(2))(H(2)O)(O(3)PCH(2)PO(3))] (1) and [[Cu(bpy)(2)][Cu(bpy)(H(2)O)](Mo(5)O(15))(O(3)PCH(2)CH(2)CH(2)CH(2)PO(3))].H(2)O (5.H(2)O) and the two-dimensional hybrids [Cu(bpy)(Mo(2)O(5))(H(2)O)(O(3)PCH(2)PO(3))].H(2)O (2.H(2)O), [[Cu(bpy)](2)(Mo(4)O(12))(H(2)O)(2)(O(3)PCH(2)CH(2)PO(3))].2H(2)O (3.2H(2)O), and [Cu(bpy)(Mo(2)O(5))(O(3)PCH(2)CH(2)CH(2)PO(3))](4). The terpyridyl series is represented by the one-dimensional [[Cu(terpy)(H(2)O)](2)(Mo(5)O(15))(O(3)PCH(2)CH(2)PO(3))].3H(2)O (7.3H(2)O) and the two-dimensional composite materials [Cu(terpy)(Mo(2)O(5))(O(3)PCH(2)PO(3))] (6) and [[Cu(terpy)](2)(Mo(5)O(15))(O(3)PCH(2)CH(2)CH(2)PO(3))] (8). The structures exhibit a variety of molybdate building blocks including isolated [MoO(6)] octahedra in 1, binuclear subunits in 2, 4, and 6, tetranuclear embedded clusters in 3, and the prototypical [Mo(5)O(15)(O(3)PR)(2)](4-) cluster type in 5, 7, and 8. These latter materials exemplify the building block approach to the preparation of extended structures.     

Solid-state coordination chemistry of the oxomolybdate-organodiphosphonate/nickel-organoimine system: structural influences of the secondary metal coordination cation and diphosphonate tether lengths

The hydrothermal reactions of a molybdate source, a nickel(II) salt, tetra-2-pyridylpyrazine (tpyprz), and organodiphosphonic acids H(2)O(3)P(CH(2))(n)()PO(3)H(2) (n = 1-5) of varying tether lengths yielded a series of organic-inorganic hybrid materials of the nickel-molybdophosphonate family. A persistent characteristic of the structural chemistry is the presence of the [Mo(5)O(15)(O(3)PR)(2)](4)(-) cluster as a molecular building block, as noted for the one-dimensional materials [[Ni(2)(tpyprz)(2)]Mo(5)O(15)[O(3)P(CH(2))(4)PO(3)]]x6.65H(2)O (6x6.65H(2)O) and [[Ni(2)(tpyprz)(2)]Mo(5)O(15)[O(3)P(CH(2))(5)PO(3)]]x3.75H(2)O (8x3.75H(2)O), the two-dimensional phases [[Ni(4)(tpyprz)(3)][Mo(5)O(15)(O(3)PCH(2)CH(2)PO(3))](2)]x23H(2)O (3x23H(2)O) and [[Ni(3)(tpyprz)(2)(H(2)O)(2)](Mo(5)O(15))(Mo(2)O(4)F(2))[O(3)P(CH(2))(3)PO(3)](2)]x8H(2)O (5x8H(2)O), and the three-dimensional structures [[Ni(2)(tpyprz)(H(2)O)(3)]Mo(5)O(15)[O(3)P(CH(2))(3)PO(3))]]xH(2)O (4xH(2)O) and [[Ni(2)(tpyprz)(H(2)O)(2)]Mo(5)O(15) [O(3)P(CH(2))(4)PO(3)]]x2.25H(2)O (7x2.25H(2)O). In the case of methylenediphosphonic acid, the inability of this ligand to tether adjacent pentanuclear clusters precludes the formation of the common molybdophosphonate building block, manifesting in contrast a second structural motif, the trinuclear [(Mo(3)O(8))(x)(O(3)PCH(2)PO(3))(y)] subunit of [[Ni(tpyprz)(H(2)O)(2)](Mo(3)O(8))(2) (O(3)PCH(2)PO(3))(2)] (1) which had been previously observed in the corresponding methylenediphosphonate phases of the copper-molybdophosphonate family. Methylenediphosphonic acid also provides a second phase, [Ni(2)(tpyprz)(2)][Mo(7)O(21)(O(3)PCH(2)PO(3))]x3.5H(2)O (9x5H(2)O), which contains a new heptamolybdate cluster [Mo(7)O(21)(O(3)PCH(2)PO(3))](4)(-) and a cationic linear chain [Ni(tpyprz)](n)(4n+) substructure. The structural chemistry of the nickel-molybdophosphonate series contrasts with that of the corresponding copper-molybdophosphonate materials, reflecting in general the different coordination preferences of Ni(II) and Cu(II). Consequently, while the Cu(II)-organic complex building block of the copper family is invariably the binuclear [Cu(2)(tpyprz)](4+) subunit, the Ni(II) chemistry with tpyprz exhibits a distinct tendency toward catenation to provide [Ni(3)(tpyprz)(2)](6+), [Ni(4)(tpyprz)(3)](8+), and [Ni(tpyprz)](n)(4n+) building blocks as well as the common [Ni(2)(tpyprz)](4+) moiety. This results in a distinct structural chemistry for the nickel(II)-molybdophosphonate series with the exception of the methylenediphosphonate derivative 1 which is isostructural with the corresponding copper compound [[Cu(2)(tpyprz)(H(2)O)(2)](Mo(3)O(8))(2)(O(3)PCH(2)PO(3))] (2). The structural chemistry of the nickel(II) series also reflects variability in the number of attachment sites at the molybdophosphonate clusters, in the extent of aqua ligation to the Ni(II) tpyprz subunit, and in the participation of phosphate oxygen atoms as well as molybdate oxo groups in linking to the nickel sites.     

Chiral fluorous dialkoxy-diamino zirconium complexes: synthesis and use in stereospecific polymerization of 1-hexene

New catalysts for the isospecific polymerization of 1-hexene based on cationic zirconium complexes incorporating the tetradentate fluorous dialkoxy-diamino ligands [OC(CF(3))(2)CH(2)N(Me)(CH(2))(2)N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(2)NO)(2-)] and [OC(CF(3))(2)CH(2)N(Me)(1R,2R-C(6)H(10))N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(Cy)NO)(2-)] have been developed. The chiral fluorous diamino-diol [(ON(Cy)NO)H(2), 2] was prepared by ring-opening of the fluorinated oxirane (CF(3))(2)COCH(2) with (R,R)-N,N'-dimethyl-1,2-cyclohexanediamine. Proligand 2 reacts cleanly with [Zr(CH(2)Ph)(4)] and [Ti(OiPr)(4)] precursors to give the corresponding dialkoxy complexes [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3) and [Ti(OiPr)(2)(ON(Cy)NO)] (4), respectively. An X-ray diffraction study revealed that 3 crystallizes as a 1:1 mixture of two diastereomers (Lambda-3 and Delta-3), both of which adopt a distorted octahedral structure with trans-O, cis-N, and cis-CH(2)Ph ligands. The two diastereomers Lambda-3 and Delta-3 adopt a C(2)-symmetric structure in toluene solution, as established by NMR spectroscopy. Cationic complexes [Zr(CH(2)Ph)(ON(2)NO)(THF)(n)](+) (n=0, anion=[B(C(6)F(5))(4)](-), 5; n=1, anion=[PhCH(2)B(C(6)F(5))(3)](-), 6) and [Zr(CH(2)Ph)(ON(Cy)NO)(THF)](+)[PhCH(2)B(C(6)F(5))(3)](-) (7) were generated from the neutral parent precursors [Zr(CH(2)Ph)(2)(ON(2)NO)] (H) and [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3), and their possible structures were determined on the basis of (1)H, (19)F, and (13)C NMR spectroscopy and DFT methods. The neutral zirconium complexes H and 3 (Lambda-3/Delta-3 mixture), when activated with B(C(6)F(5))(3) or [Ph(3)C](+)[B(C(6)F(5))(4)](-), catalyze the polymerization of 1-hexene with overall activities of up to 4500 kg PH mol Zr(-1) h(-1), to yield isotactic-enriched (up to 74 % mmmm) polymers with low-to-moderate molecular weights (M(w)=4800-47 200) and monodisperse molecular-weight distributions (M(w)/M(n)=1.17-1.79).     

Highly fluorous complexes of nickel, palladium and platinum: solubility and catalysis in high pressure CO2

A variety of Group 10 metal complexes [MXY(dfppp)], M = Ni, X, Y = Cl, Br, M = Pd, Pt, X, Y = Cl or CH(3), containing the recently reported highly fluorous diphosphine ligand, dfppp, 1,3-bis[di(fluoroponytail)phosphino]propane, {(p-F(13)C(6)C(6)H(4))(2)P}(2)(CH(2))(3) have been synthesised. They have been characterised by NMR, mass spectrometry and microanalysis, with two platinum complexes, [PtCl(2)(dfppp)] and [PtClMe(dfppp)], structurally characterised by single crystal X-ray diffraction studies. The highly fluorous nature of the ligands affords the complexes good supercritical CO(2) solubility as measured by supercritical fluid extraction (SFE), and has allowed for the copolymerisation of CO and ethylene using [PdClMe(dfppp)] as the catalyst precursor and CO(2) as the solvent. Additionally, PtCl(2) complexes of the new ligands dfppb, {(p-F(13)C(6)C(6)H(4))(2)P}(2)(CH(2))(4), and dfpop, {(p-F(13)C(6)C(6)H(4)O)(2)P}(2)(CH(2))(3), have also been prepared and characterised.