Diyne coordination chemistry: Reactions of [RuClH(CO)(PPh3)3] with diphenylbutadiyne and bis(phenylethynyl)mercury

The reaction of the hydridometal complex [RuClH(CO)(PPh₃)₃] with 1,4-diphenyl-butadi-1,3-yne has been investigated and found to proceed with monoinsertion to give a coordinatively unsaturated σ-vinyl complex [Ru-{C(CCPh)CHPh} Cl(CO)(PPh₃)₂], which is also the major product of the reaction of [RuClH(CO) (PPh₃)₃] with [Hg(CCPh)₂].     

New class of ruthenium sulfide clusters: Ru(4)S(6)(PPh(3))(4), Ru(5)S(6)(PPh(3))(5), and Ru(6)S(8)(PPh(3))(6)

Reaction of RuCl(2)(PPh(3))(3) with S(2)(-) sources yields a family of phosphine-containing Ru-S clusters which have been characterized crystallographically and by MALDI-MS. Ru(4)S(6)(PPh(3))(4) (Ru-Ru(av) = 2.94 A) has idealized T(d)() symmetry whereas Ru(6)S(8)(PPh(3))(6) (Ru-Ru(av) = 2.82 A) adopts the idealized O(h)() symmetry characteristic of Chevrel clusters. Ru(5)S(6)(PPh(3))(5) is formally derived by the addition of Ru(PPh(3)) to one face of Ru(4)S(6)(PPh(3))(4). In terms of its M-S connectivity, the Ru(5)S(6) cluster resembles a fragment of the FeMo cluster in nitrogenase.     

A RuH(2)(CO)(PPh(3))(3)-catalyzed regioselective arylation of aromatic ketones with arylboronates via carbon-hydrogen bond cleavage

When the reaction of aromatic ketones with arylboronates (arylboronic acid esters) using RuH(2)(CO)(PPh(3))(3) (3) as a catalyst was conducted in toluene, the corresponding arylation product was obtained in moderate yields. In this case, a nearly equivalent amount of a benzyl alcohol derived from a reduction of an aromatic ketone was also formed. The use of aliphatic ketones, such as pinacolone and acetone, as an additive or a solvent dramatically suppressed the reduction of the aromatic ketones and, as a result, ortho-arylation products were obtained in high yield based on the aromatic ketones. In these reactions, the aliphatic ketone functioned as a scavenger of ortho-hydrogens of the aromatic ketones and the B(OR)(2) moiety of the arylboron compound (HB species). A variety of aromatic ketones, such as acetophenones, acetonaphthones, tetralones, and benzosuberone, could also be used in this coupling reaction. Several arylboronates containing electron-donating (NMe(2), OMe, and Me) and -withdrawing (CF(3) and F) groups were also applicable to this coupling reaction. Intermolecular competitive reaction using pivalophenone-d(0)() and -d(5) and intramolecular competitive reaction using pivalophenone-d(1) were carried out using 3 as a catalyst. The k(H)/k(D) value for the intermolecular competitive reaction was substantially different, compared with intramolecular competitive reaction. This strongly suggests the production of an intermediate where the ketone carbonyl is coordinated to the ruthenium involved in this catalytic reaction. (1)H and (11)B NMR studies using 2'-methylacetophenone, phenylboronate (2), and pinacolone (6) indicate that 6 functions effectively as a scavenger of the HB species.     

NMR studies of Ru(3)(CO)(10)(PMe(2)Ph)(2) and Ru(3)(CO)(10)(PPh(3))(2) and their H(2) addition products: detection of new isomers with complex dynamic behavior

The clusters Ru(3)(CO)(10)L(2), where L = PMe(2)Ph or PPh(3), are shown by NMR spectroscopy to exist in solution in at least three isomeric forms, one with both phosphines in the equatorial plane on the same ruthenium center and the others with phosphines in the equatorial plane on different ruthenium centers. Isomer interconversion for Ru(3)(CO)(10)(PMe(2)Ph)(2) is highly solvent dependent, with DeltaH decreasing and DeltaS becoming more negative as the polarity of the solvent increases. The stabilities of the isomers and their rates of interconversion depend on the phosphine ligand. A mechanism that accounts for isomer interchange involving Ru-Ru bond heterolysis is suggested. The products of the reaction of Ru(3)(CO)(10)L(2) with hydrogen have been monitored by NMR spectroscopy via normal and para hydrogen-enhanced methods. Two hydrogen addition products are observed with each containing one bridging and one terminal hydride ligand. EXSY spectroscopy reveals that both intra- and interisomer hydride exchange occurs on the NMR time scale. On the basis of the evidence available, mechanisms for hydride interchange involving Ru-Ru bond heterolysis and CO loss are proposed.     

Cation ordering in natural and synthetic (Cu(1-x)Zn(x))(2)CO(3)(OH)(2) and (Cu(1-x)Zn(x))(5)(CO(3))(2)(OH)(6)

In the present paper we report combined experimental and theoretical studies of the UV-vis-NIR spectra of the mineral compounds malachite, rosasite, and aurichalcite and of the precursor compounds for Cu/ZnO catalysts. For the copper species in the minerals the crystal field splitting and the vibronic coupling constants are estimated using the exchange charge model of the crystal field accounting for the exchange and covalence effects. On this basis the transitions responsible for the formation of the optical bands arising from the copper centers in minerals are determined and the profiles of the absorption bands corresponding to these centers are calculated. The profiles of the absorption bands calculated as a sum of bands of their respective Cu species are in quite good agreement with the experimental data. In agreement with crystal chemical considerations, the Zn ions were found to be preferentially located on the more regular, i.e., less distorted, octahedral sites in zincian malachite and rosasite, suggesting a high degree of metal ordering in these phases. This concept also applies for the mineral aurichalcite, but not for synthetic aurichalcite, which seems to exhibit a lower degree of metal ordering. The catalyst precursor was found to be a mixture of zincian malachite and a minor amount of aurichalcite. The best fit of the optical spectrum is obtained assuming a mixture of contributions from malachite (0% Zn) and rosasite (38% Zn of [Zn + Cu]), which is probably due to the intermediate Zn content of the precursor (30%).     

Synthesis and Chemical and Electrochemical Characterization of Fe-S Carbonyl Clusters. X-ray Crystal Structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)

A reinvestigation of the redox behavior of the [Fe(3)(&mgr;(3)-S)(CO)(9)](2)(-) dianion led to the isolation and characterization of the new [Fe(5)S(2)(CO)(14)](2)(-), as well as the known [Fe(6)S(6)(CO)(12)](2)(-) dianion. As a corollary, new syntheses of the [Fe(3)S(CO)(9)](2)(-) dianion are also reported. The [Fe(5)S(2)(CO)(14)](2)(-) dianion has been obtained by oxidative condensation of [Fe(3)S(CO)(9)](2)(-) induced by tropylium and Ag(I) salts or SCl(2), or more straightforwardly through the reaction of [Fe(4)(CO)(13)](2)(-) with SCl(2). The [Fe(6)S(6)(CO)(12)](2)(-) dianion has been isolated as a byproduct of the synthesis of [Fe(3)S(CO)(9)](2)(-) and [Fe(5)S(2)(CO)(14)](2)(-) or by reaction of [Fe(4)(CO)(13)](2)(-) with elemental sulfur. The structures of [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)] and [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)] were determined by single-crystal X-ray diffraction analyses. Crystal data: for [N(PPh(3))(2)](2)[Fe(5)S(2)(CO)(14)], monoclinic, space group P2(1)/c (No. 14), a = 24.060(5), b = 14.355(6), c = 23.898(13) ?, beta = 90.42(3) degrees, Z = 4; for [N(PPh(3))(2)](2)[Fe(6)S(6)(CO)(12)], monoclinic, space group C2/c (No. 15), a = 34.424(4), b = 14.081(2), c = 19.674(2) ?, beta = 115.72(1) degrees, Z = 4. The new [Fe(5)S(2)(CO)(14)](2)(-) dianion shows a "bow tie" arrangement of the five metal atoms. The two Fe(3) triangles sharing the central Fe atom are not coplanar and show a dihedral angle of 55.08(3) degrees. Each Fe(3) moiety is capped by a triply bridging sulfide ligand. The 14 carbonyl groups are all terminal; two are bonded to the unique central atom and three to each peripheral iron atom. Protonation of the [Fe(5)S(2)(CO)(14)](2)(-) dianion gives reversibly rise to the corresponding [HFe(5)S(2)(CO)(14)](-) monohydride derivative, which shows an (1)H-NMR signal at delta -21.7 ppm. Its further protonation results in decomposition to mixtures of Fe(2)S(2)(CO)(6) and Fe(3)S(2)(CO)(9), rather than formation of the expected H(2)Fe(5)S(2)(CO)(14) dihydride. Exhaustive reduction of [Fe(5)S(2)(CO)(14)](2)(-) with sodium diphenyl ketyl progressively leads to fragmentation into [Fe(3)S(CO)(9)](2)(-) and [Fe(CO)(4)](2)(-), whereas electrochemical, as well as chemical oxidation with silver or tropylium tetrafluoroborate, in dichloromethane, generates the corresponding [Fe(5)S(2)(CO)(14)](-) radical anion which exhibits an ESR signal at g = 2.067 at 200 K. The electrochemical studies also indicated the existence of a subsequent one-electron anodic oxidation which possesses features of chemical reversibility in dichloromethane but not in acetonitrile solution. A reexamination of the electrochemical behavior of the [Fe(3)S(CO)(9)](2)(-) dianion coupled with ESR monitoring enabled the spectroscopic characterization of the [Fe(3)S(CO)(9)](-) radical monoanion and demonstrated its direct involvement in the generation of the [Fe(5)S(2)(CO)(14)](n)()(-) (n = 0, 1, 2) system.     

C60Ru(OCOCF3)(CO)(PPh3)配合物的合成及性能

富勒烯;钌配合物;循环伏安法;C60Ru(OCOCF3)(CO)(PPh3)配合物的合成及性能     

Theoretical investigation on regioselectivity of aromatic ketones in the addition with olefin catalyzed by RuH2(CO)(PPh3)3

Ab initio method is employed to study the structures of twelve aromatic ketones at HF/3-21G, HF/6-31G and HF/6-31G levels, respectively. A theoretical analysis is also carried out to study the regioselectivity and reactivity of aromatic ketones in the addition with olefin catalyzed by RuH2(CO)(PPh3)3. The results indicate that a U shape LUMO conjugation of aromatic ketones in a plane plays an important role in regioselectivity on the cleavage of p C-H bond and is a nec-essary factor to success of addition with olefin, and that sterle effect is an indispensable factor in forming additional ortho-product. Meanwhile, electronic effect may influence the rate of addition for the structures alike which only have different replacements in the same site of aromatic ring, such as furan, thiophene and pyrole. A possible catalytic reaction mechanism is proposed that the addition of C-H bond may be carried out by a coordination of aromatic ketones with Ru complex.     

Reaction of bis(phosphine)(hydrotris(3,5-dimethylpyrazolyl)borato)rhodium(I) with phenylacetylene,p-nitrobenzaldehyde,and triphenyltin hydride: structures of [Rh(Tp)(PPh(3))(2)], [Rh(Tp)(H)(C(2)Ph)(P(4-C(6)H(4)F)(3))], [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PPh(3))], and [Rh(Tp)(H)(SnPh(3))(PPh(3))

The complexes [Rh(Tp)(PPh(3))(2)] (1a) and [Rh(Tp)(P(4-C(6)H(4)F)(3))(2)] (1b) combine with PhC(2)H, 4-NO(2)-C(6)H(4)CHO and Ph(3)SnH to give [Rh(Tp)(H)(C(2)Ph)(PR(3))] (R = Ph, 2a; R = 4-C(6)H(4)F, 2b), [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PR(3))] (R = Ph, 3a), and [Rh(Tp)(H)(SnPh(3))(PR(3))] (R = Ph, 4a; R = 4-C(6)H(4)F, 4b) in moderate to good yield. Complexes 1a, 2b, 3a, and 4a have been structurally characterized. In 1a the Tp ligand is bidentate, in 2b, 3a, and 4a it is tridentate. Crystal data for 1a: space group P2(1)/c; a = 11.9664(19), b = 21.355(3), c = 20.685(3) A; beta = 112.576(7) degrees; V = 4880.8(12) A(3); Z = 4; R = 0.0441. Data for 2b: space group P(-)1; a = 10.130(3), b = 12.869(4), c = 17.038(5) A; alpha = 78.641(6), beta = 76.040(5), gamma = 81.210(6) degrees; V = 2100.3(11) A(3); Z = 2; R = 0.0493. Data for 3a: space group P(-)1; a = 10.0073(11), b = 10.5116(12), c = 19.874(2) A; alpha = 83.728(2), beta = 88.759(2), gamma = 65.756(2) degrees; V =1894.2(4) A(3); Z = 2; R = 0.0253. Data for 4a: space group P2(1)/c; a = 15.545(2), b = 18.110(2), c = 17.810(2) A; beta = 95.094(3) degrees; V = 4994.1(10) A(3); Z = 4; R = 0.0256. NMR data ((1)H, (31)P, (103)Rh, (119)Sn) are also reported.     

Aluminium complexes with thio-phosphorus ligands: syntheses and characterisations of [Al(2)(CyPS(3))(2)(CyPHS(2))(2)] and [Al(S(2)PPh(2))(3)

The novel aluminium complexes [Al(2)(CyPS(3))(2)(CyPHS(2))(2)] and [Al(S(2)PPh(2))(3)] have been prepared as potential models for alumino-thiophosphonate based materials; [Al(2)(CyPS(3))(2)(CyPHS(2))(2)] is the first example of a primary dithiophosphinate to be characterised in the solid state.     

Abnormal ligand binding and reversible ring hydrogenation in the reaction of imidazolium salts with IrH(5)(PPh(3))(2)

We show that imidazolium salts do not always give normal or even aromatic carbenes on metalation, and the chemistry of these ligands can be much more complicated than previously thought. N,N'-disubstituted imidazolium salts of type [(2-py)(CH(2))(n)(C(3)H(3)N(2))R]BF(4) react with IrH(5)(PPh(3))(2) to give N,C-chelated products (n = 0, 1; 2-py = 2-pyridyl; C(3)H(3)N(2) = imidazolium; R = mesityl, n-butyl, i-propyl, methyl). Depending on the circumstances, three types of kinetic products can be formed: in one, the imidazole metalation site is the normal C2 as expected; in another, the metalation occurs at the abnormal C4 site; and in the third, C4 metalation is accompanied by hydrogenation of the imidazolium ring. The bonding mode is confirmed by structural studies, and spectroscopic criteria can also distinguish the cases. Initial hydrogen transfer can take place from the metal to the carbene to give the imidazolium ring hydrogenation product, as shown by isotope labeling; this hydrogen transfer proves reversible on reflux when the abnormal aromatic carbene is obtained as final product. Care may therefore be needed in the future in verifying the structure(s) formed in cases where a catalyst is generated in situ from imidazolium salt and metal precursor.     

The reaction of Ru3(CO)12 with HC9PPh2)3. Characterisation of Ru3(CO)9[HC(PPh2)3], and crystal and molecular structure of Ru3(CO)9[HC(PPh2)(PhPC6H4PPh)]·CHCl3

Reaction of Ru₃(CO)₁₂ with HC(PPh₂)₃ leads to a variety of products, two of which have been characterised. One is the symmetrically capped product Ru₃(CO)₉[HC(PPh₂)₃], which was characterised spectroscopically. The second product was characterised crystallographically as Ru₃(CO)₉[HC(PPh₂)-(PhPC₆H₄PPh)]-CHCl₃.     

Metal scrambling in the trinuclear (Pt(2)Se(2)M)(M = Pt, Pd, Au) system using an electrospray mass spectrometry (ESMS) directed synthetic methodology; isolation and crystallographic characterization of (Pt(2)(mu(3)-Se)(2)(PPh(3))(4)[Pt(cod)])(PF(6))(2) and (Pt(mu(3)-Se)(2)(PPh(3))(2)[Pt(cod)](2))(PF(6))(2) (cod = cyclo-octa-1,5-diene)

Pt(2)(mu-Se)(2)(PPh(3))(4) reacts with PtCl(2)(cod) to give (Pt(2)(mu(3)-Se)(2)(PPh(3))(4)[Pt(cod)])(2+) and an unexpected cod-rich product that arises from metal scrambling, viz. (Pt(mu(3)-Se)(2)(PPh(3))(2)[Pt(cod)](2))(2+). The formation of these species was detected and followed by electrospray mass spectrometry (ESMS) and subsequently verified by batch synthesis and crystallographic characterization. Other metal-scrambled aggregate products were successfully detected.     

Cluster chemistry: XXXIX. Gold—ruthenium clusters with sulphur ligands: Synthesis and structure of HRu3Au(μ3-S)(CO)9(PPh3), Ru3Au(μ3-SBut)(CO)9(PPh3) and Ru3Au2(μ3-S)(CO)9(PPh3)2

H₂Ru₃(μ₃-S)(CO)₉ is deprotonated by K[HBBu^s₃] to give cluster anions which react with [O{Au(PPh₃)}₃]⁺ or with AuCl(PPh₃)/T1⁺ to give HRu₃Au(μ₃-S)(CO)₉(PPh₃) (1) and Ru₃Au₂(μ₃-S)(CO)₉(PPh₃)₂ (3). A similar sequence with HRu₃(μ₃-SBu^t)(CO)₉ leads to Ru₃Au(μ₃-SBu^t)(CO)₉(PPh₃) (2) as the main product although some 1 also forms, indicating SC cleavage competes with deprotonation of HRu₃(μ₃-SBu^t)(CO)₉ by [HBBu^s₃]^?. The X-ray crystal structures of 1, 2 and 3 are described; (1) and (2) have “butterfly” AuRu₃ cores with markedly different hinge angles of 119 and 148° respectively, while 3 has a trigonal-bipyramidal Au₂Ru₃ skeleton. All three clusters have the sulphur atom symmetrically bridging the Ru₃ triangular face.     

Synthesis of RuH2(CO)(PPh3)3 in a CO2 and H2 atmosphere

Summary RuH₂(CO)(PPh₃)₃ was prepared in a CO₂ and H₂ atmosphere from RuCl₃ and PPh₃ in the presence of alcohol and Et₃N. Introduction of CO into the system lead to the formation of other complexes e.g. Ru(CO)₃-(PPh₃)₂. Addition of alkali in place of Et₃N resulted in a decrease in the RuH₂(CO)(PPh₃)₃ yield.Author to whom all correspondence should be directed.