Normal mode analysis of Pyrococcus furiosus rubredoxin via nuclear resonance vibrational spectroscopy (NRVS) and resonance raman spectroscopy

We have used (57)Fe nuclear resonance vibrational spectroscopy (NRVS) to study the Fe(S(cys))(4) site in reduced and oxidized rubredoxin (Rd) from Pyrococcus furiosus (Pf). The oxidized form has also been investigated by resonance Raman spectroscopy. In the oxidized Rd NRVS, strong asymmetric Fe-S stretching modes are observed between 355 and 375 cm(-1); upon reduction these modes shift to 300-320 cm(-1). This is the first observation of Fe-S stretching modes in a reduced Rd. The peak in S-Fe-S bend mode intensity is at approximately 150 cm(-1) for the oxidized protein and only slightly lower in the reduced case. A third band occurs near 70 cm(-1) for both samples; this is assigned primarily as a collective motion of entire cysteine residues with respect to the central Fe. The (57)Fe partial vibrational density of states (PVDOS) were interpreted by normal mode analysis with optimization of Urey-Bradley force fields. The three main bands were qualitatively reproduced using a D(2)(d) Fe(SC)(4) model. A C(1) Fe(SCC)(4) model based on crystallographic coordinates was then used to simulate the splitting of the asymmetric stretching band into at least 3 components. Finally, a model employing complete cysteines and 2 additional neighboring atoms was used to reproduce the detailed structure of the PVDOS in the Fe-S stretch region. These results confirm the delocalization of the dynamic properties of the redox-active Fe site. Depending on the molecular model employed, the force constant K(Fe-S) for Fe-S stretching modes ranged from 1.24 to 1.32 mdyn/A. K(Fe-S) is clearly diminished in reduced Rd; values from approximately 0.89 to 1.00 mdyn/A were derived from different models. In contrast, in the final models the force constants for S-Fe-S bending motion, H(S-Fe-S), were 0.18 mdyn/A for oxidized Rd and 0.15 mdyn/A for reduced Rd. The NRVS technique demonstrates great promise for the observation and quantitative interpretation of the dynamical properties of Fe-S proteins.     

How nitrogenase shakes--initial information about P-cluster and FeMo-cofactor normal modes from nuclear resonance vibrational spectroscopy (NRVS)

Nitrogenase catalyzes a reaction critical for life, the reduction of N(2) to 2NH(3), yet we still know relatively little about its catalytic mechanism. We have used the synchrotron technique of (57)Fe nuclear resonance vibrational spectroscopy (NRVS) to study the dynamics of the Fe-S clusters in this enzyme. The catalytic site FeMo-cofactor exhibits a strong signal near 190 cm(-)(1), where conventional Fe-S clusters have weak NRVS. This intensity is ascribed to cluster breathing modes whose frequency is raised by an interstitial atom. A variety of Fe-S stretching modes are also observed between 250 and 400 cm(-)(1). This work is the first spectroscopic information about the vibrational modes of the intact nitrogenase FeMo-cofactor and P-cluster.     

Characterization of the Fe site in iron-sulfur cluster-free hydrogenase (Hmd) and of a model compound via nuclear resonance vibrational spectroscopy (NRVS)

We have used (57)Fe nuclear resonance vibrational spectroscopy (NRVS) to study the iron site in the iron-sulfur cluster-free hydrogenase Hmd from the methanogenic archaeon Methanothermobacter marburgensis. The spectra have been interpreted by comparison with a cis-(CO)2-ligated Fe model compound, Fe(S2C2H4)(CO)2(PMe3)2, as well as by normal mode simulations of plausible active site structures. For this model complex, normal mode analyses both from an optimized Urey-Bradley force field and from complementary density functional theory (DFT) calculations produced consistent results. For Hmd, previous IR spectroscopic studies found strong CO stretching modes at 1944 and 2011 cm(-1), interpreted as evidence for cis-Fe(CO)2 ligation. The NRVS data provide further insight into the dynamics of the Fe site, revealing Fe-CO stretch and Fe-CO bend modes at 494, 562, 590, and 648 cm(-1), consistent with the proposed cis-Fe(CO)2 ligation. The NRVS also reveals a band assigned to Fe-S stretching motion at approximately 311 cm(-1) and another reproducible feature at approximately 380 cm(-1). The (57)Fe partial vibrational densities of states (PVDOS) for Hmd can be reasonably well simulated by a normal mode analysis based on a Urey-Bradley force field for a five-coordinate cis-(CO)2-ligated Fe site with additional cysteine, water, and pyridone cofactor ligands. A "truncated" model without a water ligand can also be used to match the NRVS data. A final interpretation of the Hmd NRVS data, including DFT analysis, awaits a three-dimensional structure for the active site.     

Normal-mode analysis of FeCl4- and Fe2S2Cl42- via vibrational mössbauer, resonance Raman, and FT-IR spectroscopies

[NEt(4)][FeCl(4)], [P(C(6)H(5))(4)][FeCl(4)], and [NEt(4)](2)[Fe(2)S(2)Cl(4)] have been examined using (57)Fe nuclear resonance vibrational spectroscopy (NRVS). These complexes serve as simple models for Fe-S clusters in metalloproteins. The (57)Fe partial vibrational density of states (PVDOS) spectra were interpreted by computation of the normal modes assuming Urey-Bradley force fields, using additional information from infrared and Raman spectra. Previously published force constants were used as initial values; the new constraints from NRVS frequencies and amplitudes were then used to refine the force field parameters in a nonlinear least-squares analysis. The normal-mode calculations were able to quantitatively reproduce both the frequencies and the amplitudes of the intramolecular-mode (57)Fe PVDOS. The optimized force constants for bending, stretching, and nonbonded interactions agree well with previously reported values. In addition, the NRVS technique also allowed clear observation of anion-cation lattice modes below 100 cm(-1) that are nontrivial to observe by conventional spectroscopies. These features were successfully reproduced, either by assuming whole-body motions of point-mass anions and cations or by simulations using all of the atoms in the unit cell. The advantages of a combined NRVS, Raman, and IR approach to characterization of Fe-S complexes are discussed.     

Vibrational spectroscopy and normal-mode analysis of Fe(II) octaethylporphyrin

The normal-mode spectrum for the four-coordinated heme compound Fe(II) octaethylporphyrin, Fe(OEP), has been determined by refining force constants to the experimental Fe vibrational density of states measured with nuclear resonance vibrational spectroscopy (NRVS). Convergence of the calculated spectrum to the data was achieved by first imposing D4 symmetry on the model structure as well as the force constants, progressively including different internal coordinates of motion, then allowing the true Ci (or S2) point group symmetry of the C(i)1 Fe(OEP) crystal structure. The NRVS-refined normal modes are in good agreement with Raman and IR spectra at high frequencies. Prior density functional theory predictions for a model porphyrin are similar to the core modes computed with the best-fit force field, but significant differences between D4 and Ci modes underline the sensitivity of porphyrin Fe normal modes to structural details. Some differences between the Ci best fit and the NRVS data can be attributed to intermolecular contacts not included in the normal-mode analysis.     

Characterization of a genuine iron(V)-nitrido species by nuclear resonant vibrational spectroscopy coupled to density functional calculations

The characterization of high-valent iron species is of interest due to their relevance to biological reaction mechanisms. Recently, we have synthesized and characterized an [Fe(V)-nitrido-cyclam-acetato]+ complex, which has been characterized by M?ssbauer, magnetic susceptibility data, and XAS spectroscopies combined with DFT calculations (Aliaga-Alcade, N.; DeBeer George, S.; Bill, E.; Wieghardt, K.; Neese, F. Angew. Chem., Int. Ed. 2005, 44, 2908-2912). The results of this study indicated that the [Fe(V)-nitrido-cyclam-acetato]+ complex is an unusual d3 system with a nearly orbitally degenerate S=1/2 ground state. Although the calculations predicted fairly different Fe-N stretching frequencies for the S=1/2 and the competing S=3/2 ground states, a direct experimental determination of this important fingerprint quantity was missing. Here we apply synchrotron-based nuclear resonance vibrational scattering (NRVS) to characterize the Fe-N stretching frequency of an Fe(V)-nitrido complex and its Fe(III)-azide precursor. The NRVS data show a new isolated band at 864 cm(-1) in the Fe(V)-nitrido complex that is absent in the precursor. The NRVS spectra are fit and simulated using a DFT approach, and the new feature is unambiguously assigned to a Fe(V)-N stretch. The calculated Fe-N stretching frequency is too high by approximately 75 cm(-1). Anharmonic contributions to the Fe-N stretching frequency have been evaluated and have been found to be small (-5.5 cm(-1)). The NRVS data provided a unique opportunity to obtain this vibrational information, which had eluded characterization by more traditional vibrational spectroscopies.     

Fe vibrational spectroscopy of myoglobin and cytochrome f

The Fe vibrational density of states (VDOS) has been determined for the heme proteins deoxymyoglobin, metmyoglobin, and cytochrome f in the oxidized and reduced states, using nuclear resonance vibrational spectroscopy (NRVS). For cytochrome f in particular, the NRVS spectrum is compared with multiwavelength resonance Raman spectra to identify those Raman modes with significant Fe displacement. Modes not seen by Raman due to optical selection rules appear in the NRVS spectrum. The mean Fe force constant extracted from the VDOS illustrates how Fe dynamics varies among these four monoheme proteins, and is correlated with oxidation and spin state trends seen in model heme compounds. The protein's contribution to Fe motion is dominant at low frequencies, where coupling to the backbone tightly constrains Fe displacements in cytochrome f, in contrast to enhanced heme flexibility in myoglobin.     

Extended X-ray absorption fine structure and nuclear resonance vibrational spectroscopy reveal that NifB-co, a FeMo-co precursor, comprises a 6Fe core with an interstitial light atom

NifB-co, an Fe-S cluster produced by the enzyme NifB, is an intermediate on the biosynthetic pathway to the iron molybdenum cofactor (FeMo-co) of nitrogenase. We have used Fe K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy together with (57)Fe nuclear resonance vibrational spectroscopy (NRVS) to probe the structure of NifB-co while bound to the NifX protein from Azotobacter vinelandii. The spectra have been interpreted in part by comparison with data for the completed FeMo-co attached to the NafY carrier protein: the NafY:FeMo-co complex. EXAFS analysis of the NifX:NifB-co complex yields an average Fe-S distance of 2.26 A and average Fe-Fe distances of 2.66 and 3.74 A. Search profile analyses reveal the presence of a single Fe-X (X = C, N, or O) interaction at 2.04 A, compared to a 2.00 A Fe-X interaction found in the NafY:FeMo-co EXAFS. This suggests that the interstitial light atom (X) proposed to be present in FeMo-co has already inserted at the NifB-co stage of biosynthesis. The NRVS exhibits strong bands from Fe-S stretching modes peaking around 270, 315, 385, and 408 cm(-1). Additional intensity at approximately 185-200 cm(-1) is interpreted as a set of cluster "breathing" modes similar to those seen for the FeMo-cofactor. The strength and location of these modes also suggest that the FeMo-co interstitial light atom seen in the crystal structure is already in place in NifB-co. Both the EXAFS and NRVS data for NifX:NifB-co are best simulated using a Fe 6S 9X trigonal prism structure analogous to the 6Fe core of FeMo-co, although a 7Fe structure made by capping one trigonal 3S terminus with Fe cannot be ruled out. The results are consistent with the conclusion that the interstitial light atom is already present at an early stage in FeMo-co biosynthesis prior to the incorporation of Mo and R-homocitrate.     

Quantitative vibrational dynamics of iron in nitrosyl porphyrins

We use quantitative experimental and theoretical approaches to characterize the vibrational dynamics of the Fe atom in porphyrins designed to model heme protein active sites. Nuclear resonance vibrational spectroscopy (NRVS) yields frequencies, amplitudes, and directions for 57Fe vibrations in a series of ferrous nitrosyl porphyrins, which provide a benchmark for evaluation of quantum chemical vibrational calculations. Detailed normal mode predictions result from DFT calculations on ferrous nitrosyl tetraphenylporphyrin Fe(TPP)(NO), its cation [Fe(TPP)(NO)]+, and ferrous nitrosyl porphine Fe(P)(NO). Differing functionals lead to significant variability in the predicted Fe-NO bond length and frequency for Fe(TPP)(NO). Otherwise, quantitative comparison of calculated and measured Fe dynamics on an absolute scale reveals good overall agreement, suggesting that DFT calculations provide a reliable guide to the character of observed Fe vibrational modes. These include a series of modes involving Fe motion in the plane of the porphyrin, which are rarely identified using infrared and Raman spectroscopies. The NO binding geometry breaks the four-fold symmetry of the Fe environment, and the resulting frequency splittings of the in-plane modes predicted for Fe(TPP)(NO) agree with observations. In contrast to expectations of a simple three-body model, mode energy remains localized on the FeNO fragment for only two modes, an N-O stretch and a mode with mixed Fe-NO stretch and FeNO bend character. Bending of the FeNO unit also contributes to several of the in-plane modes, but no primary FeNO bending mode is identified for Fe(TPP)(NO). Vibrations associated with hindered rotation of the NO and heme doming are predicted at low frequencies, where Fe motion perpendicular to the heme is identified experimentally at 73 and 128 cm-1. Identification of the latter two modes is a crucial first step toward quantifying the reactive energetics of Fe porphyrins and heme proteins.     

Discrimination of mononuclear and dinuclear dinitrosyl iron complexes (DNICs) by S K-edge X-ray absorption spectroscopy: insight into the electronic structure and reactivity of DNICs

In addition to probing the formation of dinitrosyl iron complexes (DNICs) by the characteristic Fe K-edge pre-edge absorption energy ranging from 7113.4 to 7113.8 eV, the distinct S K-edge pre-edge absorption energy and pattern can serve as an efficient tool to unambiguously characterize and discriminate mononuclear DNICs and dinuclear DNICs containing bridged-thiolate and bridged-sulfide ligands. The higher Fe-S bond covalency modulated by the stronger electron-donating thiolates promotes the Fe → NO π-electron back-donation to strengthen the Fe-NO bond and weaken the NO-release ability of the mononuclear DNICs, which is supported by the Raman ν(Fe-NO) stretching frequency. The Fe-S bond covalency of DNICs further rationalizes the binding preference of the {Fe(NO)(2)} motif toward thiolates following the trend of [SEt](-) > [SPh](-) > [SC(7)H(4)SN](-). The relative d-manifold energy derived from S K-edge XAS as well as the Fe K-edge pre-edge energy reveals that the electronic structure of the {Fe(NO)(2)}(9) core of the mononuclear DNICs [(NO)(2)Fe(SR)(2)](-) is best described as {Fe(III)(NO(-))(2)}(9) compared to [{Fe(III)(NO(-))(2)}(9)-{Fe(III)(NO(-))(2)}(9)] for the dinuclear DNICs [Fe(2)(μ-SEt)(μ-S)(NO)(4)](-) and [Fe(2)(μ-S)(2)(NO)(4)](2-).     

Detection and determination of the {Fe(NO)(2)} core vibrational features in dinitrosyl-iron complexes from experiment, normal coordinate analysis, and density functional theory: an avenue for probing the nitric oxide oxidation state

As it is now well-established that nitric oxide plays an important role in many physiological processes, there is a renewed interest in dinitrosyl-iron complexes (DNICs). The question concerning the electronic structure of DNICs circles around the formal oxidation states of the iron and nitric oxide of the Fe(NO)2 core. Previous infrared measurements of nu(NO) alone point out inconsistencies in assigning electron configurations and charges on metals, inherent from the measurement of one parameter external to the metal. This work represents the first experimental and theoretical attempt to assign vibrational modes for the {Fe(NO)2}9 core of DNICs. The following complexes are investigated, [PPN][S5Fe(NO)2] (1), [PPN][Se5Fe(NO)2] (2), [PPN][(SPh)2Fe(NO)2] (3), and [PPN][(SePh)2Fe(NO)2] (4). The analysis of isotopically edited Raman data together with normal coordinate calculation permitted assignment of nu(NO) and nu(Fe-NO) stretching and delta(Fe-N-O) bending modes in these complexes. The assignments proposed are the first ever reported for the DNICs; a comparison of nu(NO) and nu(Fe-NO) stretching frequencies in DNICs is now feasible. The Fe(NO)2 core electronic configuration in these complexes is described as {Fe1+(*NO)2}. Results from 1 and 3 have been complemented by density functional theory (DFT) frequency calculations. In addition to providing a reasonably correct account of the observed frequencies, DFT calculations also give a good account of the frequency shifts upon 15NO substitution providing the first link between DFT and Raman spectroscopies for DNICs. Through the use of a combination of NO intraligand and metal-ligand vibrational data for the Fe(NO)2 core, normal coordinate analysis gives a NO stretching force constant, which compared to molecular NO gas, is significantly reduced for all four complexes. The hybrid U-B3LYP/6-311++G(3d,2p) density functional method has been employed to analyze the molecular orbital compositions of predominantly NO orbitals based on the crystal structure of complex 1. The molecular orbital not only revealed the bonding nature of the {Fe(NO)2}9 core but also provided a qualitative correct account of the observed low NO vibrational frequencies. The calculation shows that the NO is involved in a strong donor bonding interaction with the Fe1+. This donor bonding interaction involves the 5sigma molecular orbital of the NO, which is sigma-bonding with respect to the intramolecular NO bond, and removal of electron density from this orbital destabilizes the NO bond. Though it is too ambiguous to extrapolate a nu(Fe-NO)/nu(NO) correlation line for {Fe(NO)2}9 DNICs based only on the data reported here, the feasibility of using a vibrational systematics diagram to extract the electron configurations and charges on metals is demonstrated based on the vibrational data available in the literature for iron-nitrosyl complexes. The data provided here can be used as a model for the determination of effective charges on iron and the bonding of nitric oxides to metals in DNICs.     

Application of a universal force field to mixed Fe/Mo-S/Se cubane and heterocubane clusters. 1. Substitution of sulfur by selenium in the series [Fe4X4(YCH3)4]2-; X = S/Se and Y = S/Se

A series of Fe-S and Fe-Se cubane clusters containing all four combinations of the general formula [Fe(4)X(4)(Y-CH(3))(4)](2)(-) (X = S/Se, Y = S/Se) is investigated with FTIR and Raman spectroscopy. The terminally selenolate coordinated clusters (Y = Se) are prepared by a new synthetic route. All four cluster compounds are structurally characterized by X-ray single-crystal structure determination. Infrared and Raman spectra of all compounds are presented and interpreted with normal coordinate analysis. The corresponding force fields are based on that developed for the Fe(4)S(4)-benzyl cluster (Czernuszewicz, R. S.; Macor, K. A.; Johnson, M. K.; Gewirth, A.; Spiro, T. G. J. Am.Chem. Soc. 1987, 109, 7178-7187). An empirical procedure is presented to convert Fe-S into Fe-Se force constants. Only minor changes in force constants are found upon S --> Se exchange, reflecting the similarity of the Fe-S and Fe-Se bonds. The drastic frequency shifts in the metal-ligand region observed upon substitution of sulfur by selenium are, therefore, primarily due to the corresponding mass changes.     

FT-IR and FT-Raman spectroscopic investigation, computed vibrational frequency analysis and IR intensity and Raman activity peak resemblance analysis on 2-nitroanisole using HF and DFT (B3LYP and B3PW91) calculations

Fourier-transform Raman and infrared spectra of 2-nitroanisole are recorded (4000-100 cm(-1)) and interpreted by comparison with respective theoretical spectra calculated using HF and DFT method. The geometrical parameters with C(S) symmetry, harmonic vibrational frequencies, infrared and Raman scattering intensities are determined using HF/6-311++G (d, p), B3LYP/6-311+G (d, p), B3LYP/6-311++G (d, p) and B3PW91/6-311++G (d, p) level of theories. A detailed vibrational spectral analysis has been carried out and assignments of the observed fundamental bands have been proposed on the basis of peak positions and relative intensities. The results of the calculations have been used to simulate IR and Raman spectra for the molecule that showed good agreement with the observed spectra. The SQM method, which implies multiple scaling of the DFT force fields has been shown superior to the uniform scaling approach. The vibrational frequencies and the infrared intensities of the C-H modes involved in back-donation and conjugation are also investigated.     

Determination of structural and vibrational spectroscopic properties of 2-, 3-, 4-nitrobenzenesulfonamide using FT-IR and FT-Raman experimental techniques and DFT quantum chemical calculations

In this work, the molecular conformation and vibrational analysis of 2-, 3-, 4-nitrobenzenesulfonamide (abbreviated as 2-, 3-, 4-NBSA) were presented for the ground state using experimental techniques (FT-IR and FT-Raman) and density functional theory (DFT) employing B3LYP exchange correlation with the 6-311++G(d,p) basis set. The complete assignments of fundamental vibrations were performed on the basis of the experimental results and total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The effects of the nitro group substituent on the characteristic benzene sulfonamides bands in the spectra were discussed. Raman activities calculated by DFT method have been converted to the corresponding Raman intensities using Raman scattering theory. Optimized structure of compounds were interpreted and compared with the earlier reported experimental values for studied molecules. The observed and the calculated geometric parameters and vibrational wavenumbers were compared and found to be in good agreement.     

FT-IR, FT-Raman, NMR and UV-vis spectra, vibrational assignments and DFT calculations of 4-butyl benzoic acid

The solid phase FTIR and FT-Raman spectra of 4-butyl benzoic acid (4-BBA) have been recorded in the regions 400-4000 and 50-4000cm(-1), respectively. The spectra were interpreted in terms of fundamentals modes, combination and overtone bands. The structure of the molecule was optimized and the structural characteristics were determined by density functional theory (DFT) using B3LYP method with 6-311++G(d,p) as basis set. The vibrational frequencies were calculated for monomer and dimer by DFT method and were compared with the experimental frequencies, which yield good agreement between observed and calculated frequencies. The infrared and Raman spectra were also predicted from the calculated intensities. (13)C and (1)H NMR spectra were recorded and (13)C and (1)H nuclear magnetic resonance chemical shifts of the molecule were calculated using the gauge independent atomic orbital (GIAO) method. UV-visible spectrum of the compound was recorded in the region 200-400nm and the electronic properties HOMO and LUMO energies were measured by time-dependent TD-DFT approach. The geometric parameters, energies, harmonic vibrational frequencies, IR intensities, Raman intensities, chemical shifts and absorption wavelengths were compared with the available experimental data of the molecule.     

FTIR and FT-Raman spectra, vibrational assignments and density functional theory calculations of 2,6-dibromo-4-nitroaniline and 2-(methylthio)aniline

The FTIR and FT-Raman spectra of 2,6-dibromo-4-nitroaniline (2,6-DB4NA) in solid phase and 2-(methylthio)aniline (2-MTA) in liquid phase were measured. The geometry and normal vibrations have been obtained from the density functional theory (DFT) with the B3LYP method employing the 6-31G* basis set. Scale factors, which bring computational frequencies in closer agreement with the experimental data, have been calculated for predominant vibrational motions of the normal modes. The effects of the amino, bromine, nitro, thio and methyl substituents on vibrational frequencies have been investigated. The infrared and Raman spectra were also predicted from the calculated intensities. The observed and the calculated spectra were found to be in good agreement.     

Direct probe of iron vibrations elucidates NO activation of heme proteins

We use nuclear resonance vibrational spectroscopy (NRVS) to identify the Fe-NO stretching frequency in the NO adduct of myoglobin (MbNO) and in the related six-coordinate porphyrin Fe(TPP)(1-MeIm)(NO). Frequency shifts observed in MbNO Raman spectra upon isotopic substitution of Fe or the nitrosyl nitrogen confirm and extend the NRVS results. In contrast with previous assignments, the Fe-NO frequency of these six-coordinate complexes lies 70-100 cm-1 lower than in the analogous five-coordinate nitrosyl complexes, indicating a significant weakening of the Fe-NO bond in the presence of a trans imidazole ligand. This result supports proposed mechanisms for NO activation of heme proteins and underscores the value of NRVS as a direct probe of metal reactivity in complex biomolecules.     

CRYSTAL STRUCTURE OF (Et_4N)_4[Mo_2Fe_7S_8(SPh)_(12)]

<正> (Et4N)4[Mo2Fe7S8(SPh)12] : Mw=2670.3, triclinic, p1, a=12.775(4), b=13.076(3), c=20.576(4)A, α=80.00(2), β=81.39(2), γ=61.51(2)°, V=2966.3(14) A3, Z=1, D=1.494 gcm-3, R=0.077 for 4031 observed reflections. The complex was prepared by reactions of (Et4N)2[Fe4(SPh) 10] with (Et4N)2MoS4 in an ace-tonitrile solution. The structure of [Mo2Fe7S8(SPh)12]4- anion is a double-cubane-like configuration bridged by a Fe(SPh)6 group.     

Nitrosylation of Nitric‐Oxide‐Sensing Regulatory Proteins Containing [4Fe‐4S] Clusters Gives Rise to Multiple Iron–Nitrosyl Complexes

The reaction of protein‐bound iron–sulfur (Fe‐S) clusters with nitric oxide (NO) plays key roles in NO‐mediated toxicity and signaling. Elucidation of the mechanism of the reaction of NO with DNA regulatory proteins that contain Fe‐S clusters has been hampered by a lack of information about the nature of the iron‐nitrosyl products formed. Herein, we report nuclear resonance vibrational spectroscopy (NRVS) and density functional theory (DFT) calculations that identify NO reaction products in WhiD and NsrR, regulatory proteins that use a [4Fe‐4S] cluster to sense NO. This work reveals that nitrosylation yields multiple products structurally related to Roussin's Red Ester (RRE, [Fe₂(NO)₄(Cys)₂]) and Roussin's Black Salt (RBS, [Fe₄(NO)₇S₃]. In the latter case, the absence of ³²S/³⁴S shifts in the Fe?S region of the NRVS spectra suggest that a new species, Roussin's Black Ester (RBE), may be formed, in which one or more of the sulfide ligands is replaced by Cys thiolates.     

Vibrational frequencies and structural determination of Al(8)S(12)

The normal mode frequencies and corresponding vibrational assignments of Al(8)S(12) in T(h) symmetry are examined theoretically using the Gaussian98 set of quantum chemistry codes. All normal modes were successfully assigned to one of four types of motion (Al-S stretch, Al-S-Al bend, S-Al-S bend, and Al-S-Al wag) predicted by a group theoretical analysis. Normal mode frequencies are predicted and calculated infrared intensities and Raman activities are presented. The thermodynamics of the reaction 2Al(4)S(6)-->Al(8)S(12) are examined.