Synthesis and in vitro characterization of semitelechelic poly[N-(2-hydroxypropyl)methacrylamide]-trastuzumab conjugates targeted to breast cancer

Trastuzumab (TRZ) is a humanized monoclonal antibody that targets the extracellular domain of the human epidermal growth factor receptor type 2 (Her2). Semitelechelic (ST) poly[N-(2-hydroxypropyl)methacrylamide]-TRZ conjugates are successfully synthesized and evaluated as a potential drug delivery system that actively targets Her2-overexpressing cancer cells. The ST backbone shows favorable characteristics when conjugated to TRZ. The conjugate exhibits comparable and prolonged anticancer activity when compared to free TRZ in Her2 overexpressing breast cancer cell lines.     

Self-assembling diblock copolymers of poly[N-(2-hydroxypropyl)methacrylamide] and a beta-sheet peptide

The self-assembly of hybrid diblock copolymers composed of poly(HPMA) and beta-sheet peptide P11 (CH(3)CO-QQRFQWQFEQQ-NH(2)) blocks was investigated. Copolymers were synthesized via thiol-maleimide coupling reaction, by conjugation of semitelechelic poly(HPMA)-SH with maleimide-modified beta-sheet peptide. As expected, CD and CR binding studies showed that the peptide block imposed its beta-sheet structural arrangement on the structure of diblock copolymers. TEM and AFM proved that peptide and these copolymers had the ability to self-assemble into fibrils.     

N‐(2‐Hydroxypropyl)methacrylamide (HPMA) Copolymer‐Linked Nitroxides: Potential Magnetic Resonance Contrast Agents

N‐(2‐Hydroxypropyl)methacrylamide (HPMA) copolymer‐linked nitroxides were synthesized as macromolecular contrast agents for MR imaging. Molar relaxivities of HPMA copolymer‐linked nitroxides increased linearly in proportion to the number of nitroxides attached per gram of copolymer. HPMA copolymer‐linked nitroxides with 15, 20 and 30 mol‐% nitroxide exhibited higher relaxivities than gadolinium diethylenetriaminepentaacetic acid (Gd‐DTPA). These results demonstrate the potential of HPMA copolymer‐linked nitroxides as MR contrast agents for solid tumors.

Structure of HPMA copolymer‐linked nitroxides.     

Stabilization and Release of Enzymes from Silk Films

A significant challenge remains to protect protein drugs from inactivation during production, storage, and use. In the present study, the stabilization and release of horseradish peroxidase (HRP) in silk films was investigated. Water‐insoluble silk films were prepared under mild aqueous conditions, maintaining the activity of the entrapped enzyme. Depending on film processing and post‐processing conditions, HRP retained more than 90% of the initial activity at 4 °C, room temperature and 37 °C over two months. The stability of protein drugs in silk films is attributed to intermolecular interactions between the silk and the enzymes, based on Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The unique structural feature of silk molecules, periodic hydrophobic‐hydrophilic domains, enabled strong interactions with proteins. The entrapped protein was present in two states, untrapped active and trapped inactive forms. The ratio between the two forms varied according to processing conditions. Proteolytic degradation and dissolution of the silk films resulted in the release of the bound enzyme which was otherwise not released by diffusion; enzyme recovered full activity upon release. There was a linear relationship between silk degradation/dissolution and the release of entrapped enzyme. Modifying the secondary structure of the silk matrix and the interactions with the non‐crystalline domains resulted in control of the film degradation or dissolution rate, and therefore the release rate of the entrapped enzyme. Based on the above results, silk materials are an intriguing carrier for proteins in terms of both retention of activity and controllable release kinetics from the films.

     

In vitro enzymatic degradation of nanoparticles prepared from hydrophobically-modified poly(gamma-glutamic acid)

Amphiphilic poly(gamma-glutamic acid) (gamma-PGA) was prepared by the introduction of L-phenylalanine ethylester (L-PAE) as a side chain. This gamma-PGA-graft-L-PAE formed monodispersed nanoparticles in water. The particle size of the gamma-PGA nanoparticles could be controlled by the degree of L-PAE grafting. The hydrolytic degradation and enzymatic degradation by gamma-glutamyl transpeptidase (gamma-GTP) of these gamma-PGA nanoparticles was studied by gel permeation chromatography (GPC) and scanning electron microscopy (SEM). The hydrolysis ratio of gamma-PGA was found to decrease upon increasing the hydrophilicity of the gamma-PGA. The degradation of the gamma-PGA backbone by gamma-GTP resulted in a dramatic change in nanoparticle morphology. With increasing time, the gamma-PGA nanoparticles reduced in size and finally disappeared completely.Time-course of the changes in the morphology of the gamma-PGA nanoparticles following incubation with gamma-glutamyl transpeptidase.     

pH-Responsive Self-assembled Nanoparticles of Simulated P(AA-co-SA)-g-PEG for Drug Release

Simulated graft copolymer of poly(acrylic acid-co-stearyl acylate) [P(AA-co-SA)] and poly(ethylene glycol) (PEG) was synthesized, where acrylic acid, stearyl acylate and PEG was employed as the pH-sensitive, hydrophobic and hydrophilic segment, respectively. Polymeric nanoparticles prepared by the dialysis of simulated graft copolymer solution in dimethylformamide against citrate buffer solution with different pH values were characterized by transmission electron microscopy (TEM), fluorescence technique and laser light scattering (LLS). TEM image revealed the spherical shape of the self-aggregates, which was further confirmed by LLS measurements. The critical aggregation concentration increased markedly (10 to 150 mg/L) with increasing pH (4.6 to 7.0), consistent with the de-protonation of carboxylic groups at higher pH. The hydrodynamic radius of polymeric nanoparticles decreased from 118 nm at pH 3.4 to 90 nm at pH 7.0. The controlled release of indomethacin from those nanoparticles was investigated, and the self-assembled nanoparticles exhibited improved performance in controlled drug release.     

Water-soluble nanoparticles from random copolymer and oppositely charged surfactant, 3a. Nanoparticles of poly(ethylene glycol)-based cationic random copolymer and fatty acid salts

In this report, we investigate the nanoparticle formation between random copolymers (RCPs) of methoxy-poly(ethylene glycol) monomethacrylate (MePEGMA) and (3-(methacryloylamino)propyl)trimethylammonium chloride (MAPTAC) and oppositely charged natural surfactants, sodium oleate and sodium laurate, using turbidimetric titration, steady-state fluorescence, dynamic light scattering, and electron microscopy. Though sodium oleate and sodium laurate are sparingly soluble in water, the nanoparticle complexes formed between the RCPs and these surfactants are soluble in the entire range of compositions studied here, including the stoichiometric electronetural complexes. The spherical nature of these nanoparticle complexes is revealed by electron microscopic (EM) analysis. Dynamic light scattering (DLS) showed that the average diameters of the nanoparticles are in the range 50 to 150 nm, which is supported by EM analysis. Pyrene fluorescence experiments suggested that these soluble nanoparticles have hydrophobic cores, which may solubilize hydrophobic drug molecules. The polarity index (I(1)/I(3)) obtained from the pyrene fluorescence spectra and the conductometric measurements showed that the critical concentration of fatty acid salts needed to obtain nanoparticles are in the order of 10(-4) M. Further, the complexation of such poorly water-soluble amphiphilic surfactants with polymers offers a useful method for the immobilization of hydrophobic compounds towards water-soluble drug carrier formulations. The formation of water-soluble nanoparticles by the self-assembly of fatty acid salts upon interacting with oppositely charged poly(ethylene glycol)-based polyions.     

Determination of total platinum in plasma and plasma ultrafiltrate,from subjects dosed with the platinum-containing N-(2-hydroxypropyl)methacrylamide copolymer AP5280, by use of graphite-furnace Zeeman atomic-absorption spectrometry

AP5280 is an N-(2-hydroxypropyl)methacrylamide (HPMA) copolymer to which are linked tetrapeptide side chains containing bioactive platinum complexes at their C-terminal sides. We have developed and validated a rapid and sensitive analytical assay for the determination of total platinum concentrations in plasma, and free platinum of an AP5280 origin in plasma ultrafiltrate (PUF), of subjects dosed with AP5280. The total platinum levels were determined by use of graphite-furnace atomic-absorption spectrometry (GF-AAS) with Zeeman correction after appropriate dilution of the plasma sample with plasma-hydrochloric acid 0.2 mol L(-1) (1:5) as diluent. The limit of quantitation of this assay is 0.25 micromol L(-1) platinum in plasma. Linear calibration curves were obtained over the concentration range 0.25-5.0 micromol L(-1). Accuracy was between 87.7% and 104.2% and precision was 15.3% at the lowest concentration and less than 14% for all other levels tested. Accuracy and precision were thus in accordance with generally accepted criteria for analytical methods. Analysis of samples obtained from patients receiving AP5280 demonstrated the applicability of the described assay.Analysis of free platinum in PUF was performed by use of a previously validated and reported assay from our institute in which the same instrumental method is used.     

Release of chlorambucil from poly(N-isopropylacrylamide) hydrogels with beta-cyclodextrin moieties

The present work is focused on investigating the behavior of controlled drug release poly(N-isopropylacrylamide) (PNIPA) hydrogels in the presence of beta-cyclodextrin (beta-CD). For this purpose, three types of NIPA hydrogels with beta-CD moieties were synthesized with different architectures according to our previous studies. An anti-cancer drug (chlorambucil, CLB), which can form an inclusion complex with beta-CD, was selected for loading and in vitro release studies. The drug was loaded into hydrogels via a swelling method. DSC was used to study the interactions between the CLB molecules and the polymers. The results indicate that the CLB-polymer interactions are at the molecular level. Loading CLB into these polymers can result in an evident decrease in the glass transition temperature (T(g)), and the variation of T(g) (DeltaT(g)) depends on the structures of the polymers and their beta-CD content. The controlled release experiments show that the presence of beta-CD can markedly enhance CLB release from shrunken PNIPA hydrogels and increase the ratio of CLB released in total drug loading content. Release profile of CLB from hydrogels 1a-c and 4 at pH 1.4 and 7.4, at 37 degrees C.     

Superparamagnetic Nanocomposites of Poly(vinyl alcohol-graft-acrylonitrile) as Carrier for Magnetically Assisted Release of Ciprofloxacin

In the present study also a superparamagnetic nanocomposite of Poly (vinyl- alcohol-g-acrylonitrile) has been designed by homogeneous impregnation of iron oxide nanoparticles into the graft polymer matrix. The so prepared nanocomposite was characterized by FT-IR, TEM and XRD techniques and studied for water sorption behavior and magnetization properties. The superparamagnetic nanocomposite was loaded with an antibiotic drug, ciprofloxacin (CFx), and its release behavior was investigated under varying experimental conditions such as chemical composition of the matrix, pH of the release media, applied magnetic field and percent loading of the drug. The drug transport mechanism was also analyzed using Ficks power law. The drug loaded magnetic nanocomposite was also studied for antibacterial and in-vitro blood compatible properties.     

A series of poly[N-(2-hydroxypropyl)methacrylamide] copolymers with anthracene-derived fluorophores showing aggregation-induced emission properties for bioimaging

A series of new poly[N-(2-hydroxypropyl)methacrylamide]-based amphiphilic copolymers were synthesized through a radical copolymerization of a monomeric/hydrophobic fluorophore possessing aggregation-induced emission (AIE) property with N-(2-hydroxypropyl)methacrylamide. Photophysical properties were investigated using UV-Vis absorbance and fluorescence spectrophotometry. Influences of the polymer structures with different molar ratios of the AIE fluorophores on their photophysical properties were studied. Results show that the AIE fluorophores aggregate in the cores of the micelles formed from the amphiphilic random copolymers and polymers with more hydrophobic AIE fluorophores facilitate stronger aggregations of the AIE segments to obtain higher quantum efficiencies. The polymers reported herein have good water solubility, enabling the application of hydrophobic AIE materials in biological conditions. The polymers were endocytosed by two experimental cell lines, human brain glioblastoma U87MG cells and human esophagus premalignant CP-A, with a distribution into the cytoplasm. The polymers are non-cytotoxic to the two cell lines at a polymer concentration of 1 mg/mL.     

Degradation of poly(β‐amino ester) gels in alcohols through transesterification: Method to conjugate drugs to polymer matrices

Poly(β amino ester) (PβAE) polymers have received growing attention in the literature, owing to their ease of synthesis, versatile co‐monomer selection, and highly tunable degradation kinetics. As such, they have shown extensive potential in many biomedical applications as well. In this work, it is demonstrated for the first time that PβAE polymers containing primary and secondary amine groups can undergo degradation by primary alcohols via transesterification mechanism. While this work emphasizes an important aspect of solvent compatibility of these networks, it also represents an interesting, simple mechanism for post synthesis drug incorporation, with riboflavin conjugation being demonstrated as a model compound. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2019–2026     

Controlled Release of IgG by Novel UV Induced Polysaccharide/Poly(amino acid) Hydrogels

The development of new protein and peptide drugs needs new delivery systems able to entrap such drugs in safe conditions without affecting their structure and biological activity. In this context, the present work reports a new approach to load IgG, used as a model of therapeutic proteins such as anti‐TNF‐α monoclonal antibodies, into a polymeric system able to release the entrapped IgG in a controlled manner. In particular, new polysaccharide/poly(amino acid) UV induced hydrogels are proposed as colon delivery systems for human IgG. The poly(amino acid), α,β‐poly[N‐(2‐hydroxyethyl)‐D ,L ‐aspartamide], has been functionalized with methacrylic anhydride, while the polysaccharide, inulin, has been functionalized with methacrylic anhydride and succinic anhydride. The hydrogels were obtained by a short‐time UV irradiation, in physiological‐like conditions, without the use of radical initiators, at low temperature and in the presence or in the absence of PEGDM₅₅₀ used as a co‐crosslinker in order to evaluate potential differences in terms of physicochemical properties and release profile. The obtained hydrogels were degradable by inulinase, showed a high cell compatibility and the released antibodies, analyzed by SEC and ELISA, retained their biological activity.

     

Sustained and Extended Release with Structural and Activity Recovery of Lysozyme from Complexes with Sodium (Sulfamate Carboxylate) Isoprene/Ethylene Oxide Block Copolymer

The complexation of lysozyme and sodium (sulfamate carboxylate) isoprene/ethylene oxide (SCIEO) at pH = 7.4 and the release of lysozyme from the complexes in the presence of NaCl were investigated. Through electrostatic and hydrophobic interactions, lysozyme and SCIEO form stable complex nanoparticles. The complexation partially disturbs the structure of lysozyme. Some of the hydrophobic residues of lysozyme are exposed to bind with SCIEO. The complexation leads to loss of most of the lysozyme activity. In the presence of NaCl, lysozyme can be released from the complexes. The released lysozyme molecules recover their native structure and activity completely. In the condition of physiological pH and ionic strength, a sustained and extended release of lysozyme was achieved.

     

Adsorption of protein on the surface of thermosensitive poly(methyl methacrylate) microspheres modified with the N-(2-hydroxypropyl)methacrylamide and 2-(methacryloyloxy)ethyl phosphorylcholine moieties

A series of microspheres composed of methyl methacrylate (MMA) and N-(2-hydroxypropyl)methacrylamide (HPMA), and/or 2-(methacryloyloxy)ethyl phosphorylcholine (MPC), i.e., binary copolymer microspheres [poly(HPMA-co-MMA)_KPS and poly(HPMA-co-MMA)_ABIP] and ternary ones [poly(HPMA/MPC-co-MMA)_KPS and poly(HPMA/MPC-co-MMA)_ABIP], were prepared by emulsifier-free emulsion copolymerization using potassium peroxodisulfate (KPS) or 2,2′-azobis[2-(imidazolin-2-yl)propane] dihydrochloride (ABIP) as initiators. The decrease in ζ-potential of the polymer microspheres is caused by the addition of the HPMA and/or MPC moieties. Equilibrium water content of poly(HPMA-co-MMA)_ABIP showed a remarkable swelling change with a change in response to temperature: the hydrated conformation at 28°C and the dehydrated one at above 40°C. The adsorption of protein on the polymer microspheres also changed in response to change in temperature. The ternary polymer microspheres effectively suppressed the adsorption both of Alb and Glo, less than binary ones. A series of polymer microspheres are expected to apply as a novel drug carrier with both thermosensitive and nonthrombogenic functions. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3349–3357, 1997