石墨烯量子点增强聚吡咯超级电容器电极的电化学性质(英文)

通过将吡咯单体在低温下与石墨烯量子点进行原位聚合,获得一种全新的聚吡咯/石墨烯量子点(PPY/GQD)复合材料.实验中采用了扫描电子显微镜(SEM)、原子力显微镜(AFM)、X射线衍射(XRD)、红外光谱(FT-IR)和热重分析(TGA)对复合物的表面形貌、结构进行表征.结果表明,吡咯单体以石墨烯量子点为软模板,以化学键的方式在石墨烯量子点的表面聚合生长成片状聚吡咯.通过机械冷压法将粉末状PPY/GQD复合物压成圆片电极.电极的电化学测试结果表明,PPY和GQD质量比为50:1所制得的复合物的电容量为485 F.g-1,同时在2000次循环之后电容量只降低了大约2%.通过与同比例的PG(聚吡咯/石墨烯复合材料)以及纯PPY对比,发现聚吡咯/石墨烯量子点的高比容量及优异的循环稳定性将会使其在电化学超级电容器领域中具有潜在的应用价值.     

石墨烯/聚吡咯纳米纤维超级电容器电极材料的制备及其电化学性能

超级电容器因其具有较高的循环稳定性和较好的能量密度而成为储能器件中的研究热点,其电极材料及制备方法是决定超级电容器电化学性能的关键因素。 本文以聚环氧乙烷-聚环氧丙烷-聚环氧乙烷三嵌段共聚物(P123)为软模板,通过一步原位聚合法成功地制备了石墨烯/聚吡咯纳米纤维(GR/PPy NF)复合超级电容器电极材料。 通过X射线衍射(XRD),X射线光电子能谱(XPS)、透射电子显微镜(TEM)和傅里叶变换红外光谱仪(FT-IR)等对复合材料的结构和形态进行了系统的表征。 利用电化学方法对GR/PPy NF复合电极材料的电化学性能进行了系统的分析。 结果表明,在电流密度0.5 A/g下,纳米复合材料的比电容量高达969.5 F/g,在充放电600圈之后,仍可保留初始比电容的88%,展示了良好的电容性能及循环稳定性。 GR/PPy NF制备简单,性能优异,是一种很有前途的能量转换/存储材料。     

石墨烯/还原氧化石墨烯/聚苯胺复合材料的制备及在超级电容器中的应用

本研究以低成本、易规模化的亲水性石墨烯/氧化石墨烯为前驱体,通过原位聚合的方法制备石墨烯/氧化石墨烯/聚苯胺复合材料,经过化学还原后制备得到石墨烯/还原氧化石墨烯/聚苯胺复合材料.采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)和傅里叶红外变化光谱仪(FT-IR)对制备的材料进行了结构和形貌的表征.运用循环伏安法...     

聚吡咯在超级电容器中的应用

聚吡咯以其制备简单、掺杂可逆、环境友好、导电率高、比电容大、具有良好的成膜性而备受关注。特别是在作为超级电容器、二次电池等换能设备电极材料领域中前景广阔。文章简略地介绍了超级电容器的双电层电容和法拉第赝电容产生的机理,概述了近年来聚吡咯与金属氧化物、炭材料等通过化学法、电化学法以及界面化学法等新型手段制备聚吡咯电极的研究进展。     

聚吡咯/硝酸活化碳气凝胶纳米复合材料的制备表征及其在超级电容器中的应用

通过化学氧化聚合法制备出不同比例的聚吡咯(PPY)/硝酸活化碳气凝胶(HCA)复合材料。采用傅里叶变换红外光谱(FT-IR)和扫描电子显微镜(SEM)表征材料的成分和形貌,结果表明,通过硝酸活化及与聚吡咯的复合,并未破坏碳气凝胶的多孔形貌,硝酸活化碳气凝胶及聚吡咯/硝酸活化碳气凝胶都仍然保持着原碳气凝胶的三维纳米多孔结构。采用对照实验的方法,设计并合成五组不同配比的复合材料,聚吡咯与硝酸活化碳气凝胶的质量比例分别为3:1、2:1、1:1、1:2、1:3,通过循环伏安法,恒流充放电,交流阻抗及循环性测试等考察材料的电化学性能。结果证明,当聚吡咯与硝酸活化碳气凝胶比例为1:1时,复合材料显示出最优电化学性能:比电容高达336 F·g^-1,是纯碳气凝胶(103 F·g^-1)的三倍有余,除此还显示出卓越的导电性与循环稳定性, 2000次循环后仍保持初始电容的91%,具备优良的超级电容器电极材料性能。因此聚吡咯/硝酸活化碳气凝胶复合纳米材料是超级电容器的理想电极材料。     

聚吡咯/还原氧化石墨烯复合物的合成及电容性能

通过原位聚合方法制备不同配比的聚吡咯/氧化石墨（PPy/GO）复合物,将其用NaBH4还原得到聚吡咯/还原氧化石墨烯(PPy/RGO)复合物,采用X射线衍射、红外光谱和场发射扫描电子显微镜（FESEM）对其结构和形貌进行物理表征。 采用循环伏安、恒电流充放电和交流阻抗等电化学方法系统研究了所制备样品的电化学性能。 实验结果表明,在电流密度为0.5 A/g、吡咯（Py）与GO质量比为95∶5时,得到的复合物还原前后比电容分别可达401.5和314.5 F/g,远高于单纯的GO（34.8 F/g）和PPy（267.5 F/g）。 经过1200圈循环稳定性测试后,PPy/RGO复合物比电容保持了原来的62.5%,与PPy和PPy/GO（电容保持率分别为16.8%和46.4%）相比,PPy/RGO表现出更好的循环稳定性能,有望成为超级电容器电极材料。     

氧化石墨烯/聚吡咯插层复合材料的制备和电化学电容性能

以FeCl₃-甲基橙(MO)为模板, 通过化学原位聚合法成功制备出氧化石墨烯/聚吡咯(GO/PPy)插层复合材料. 采用X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、扫描电镜(SEM)和透射电镜(TEM)等测试技术对复合材料进行物性表征. 此外, 利用循环伏安、恒电流充放电和交流阻抗测试方法对复合材料在两种不同水系电解液(1 mol·L^-1 Na₂SO₄和1 mol·L^-1 H₂SO₄)中的电化学性能进行了研究. 结果显示: 氧化石墨烯和聚吡咯表现出各自优势并发挥协同作用, 使得GO/PPy插层复合材料在中性和酸性电解液中都显示出可观的比电容. 电流密度为0.5 A·g^-1时, GO/PPy 插层复合材料在Na₂SO₄和H₂SO₄电解液中的比电容分别为449.1 和619.0 F·g^-1, 明显高于纯PPy的比电容. 经过800 次循环稳定性测试后, 两种不同电解液中, 复合材料初始容量的保持率分别为92%和62%. 其中酸性电解液体系中初始容量更大, 而中性溶液中具有更稳定的循环性能.     

基于过渡金属硫化物/还原氧化石墨烯复合物的高性能超级电容器

组装高能量密度的非对称超级电容器需要使用比电容大、 体积变化小且循环稳定性好的电极材料. 过渡金属硫化物(TMSs)与纳米碳材料的复合物是此类电极材料之一. 采用水热法合成了由Cu-Mo硫化物在微波剥离的还原氧化石墨烯表面生长的复合材料(CuS-MoS₂/MErGO). 此复合材料在电流密度为2 A/g时具有高达861.5 F/g的比电容和良好的循环稳定性. 将1.6 V的电池电压施加在由NiS/MErGO为正极, CuS-MoS₂/MErGO为负极组装成的不对称超级电容器上时, 该电容器的功率密度为1.28 kW/kg, 且能量密度保持为54.2 W·h·kg^-1. 结果表明, TMS复合材料是一种很有前途的高性能电化学储能材料, 尤其是用于非对称超级电容器的组装.     

聚吡咯/海藻酸钠纳米球的制备及其应用于高性能超级电容器

用海藻酸钠作为结构导向剂,通过原位氧化聚合吡咯法制备了聚吡咯/海藻酸钠(PPy/SA)纳米球.聚吡咯/海藻酸钠纳米球的形貌和结构通过扫描电镜(SEM)、X射线衍射(XRD)和傅里叶变换红外(FTIR)光谱进行表征.材料的电化学性能通过循环伏安法和恒电流充放电方法进行测试.电化学测试表明,聚吡咯/海藻酸钠纳米球在1 mol L-1KCl电解液中,电流密度为1 A g-1时其比电容高达347 F g-1.与纯聚吡咯相比较,聚吡咯/海藻酸钠纳米球具有更优异的循环稳定性能.     

三氧化钼纳米带/石墨烯纳米复合材料的简单制备及其在超级电容器中的应用

采用简单的超声自组装法制备了石墨烯/三氧化钼纳米带复合材料。最终产物的组成和结构采用多种不同的手段进行了表征,包括扫描电镜、透射电镜、X射线衍射、拉曼光谱以及热分析等。该复合材料可以用作超级电容器电极材料。电化学实验结果表明石墨烯/三氧化钼纳米带复合材料比电容可达到285.5 F·g^-1,且在电流密度为1 A·g^-1时经过1 000次循环后其电容值能保持初始值的99.5%.     

Manganese Oxide/Graphene Aerogel Composites as an Outstanding Supercapacitor Electrode Material

Graphene aerogels (GA), prepared with an organic sol–gel process, possessing a high specific surface area of 793 m² g^?1, a high pore volume of 3 cm³ g^?1, and a large average pore size of 17 nm, were applied as a support for manganese oxide for supercapacitor applications. The manganese oxide was electrochemically deposited into the highly porous GA to form MnO₂/GA composites. The composites, at a high manganese oxide loading of 61 wt. %, exhibited a high specific capacitance of 410 F g^?1 at 2 mV s^?1. More importantly, the high rate specific capacitances measured at 1000 mV s^?1 for these composites were two‐fold higher than those obtained with samples prepared in the absence of the GA support. The specific capacitance retention ratio, based on the specific capacitance obtained at 25 mV s^?1, was maintained high, at 85 %, even at the high scan rate of 1000 mV s^?1, in contrast with the significantly lower value of 67 % for the plain manganese oxide sample. For the cycling stability, the specific capacitance of the composite electrode decayed by only 5 % after 50,000 cycles at 1000 mV s^?1. The success of this MnO₂/GA composite may be attributed to the structural advantages of high specific surface areas, high pore volumes, large pore sizes, and three‐dimensionally well‐connected network of the GA support. These structural advantages made possible the high mass loading of the active material, manganese oxide, large amounts of electroactive surfaces for the superficial redox events, fast mass‐transfer within the porous structure, and well‐connected conductive paths for the involved charge transport.     

A High-Performance Asymmetric Supercapacitor Based on Tungsten Oxide Nanoplates and Highly Reduced Graphene Oxide Electrodes

Tungsten oxide/graphene hybrid materials are attractive semiconductors for energy-related applications. Herein, we report an asymmetric supercapacitor (ASC, HRG//m-WO₃ ASC), fabricated from monoclinic tungsten oxide (m-WO₃) nanoplates as a negative electrode and highly reduced graphene oxide (HRG) as a positive electrode material. The supercapacitor performance of the prepared electrodes was evaluated in an aqueous electrolyte (1 m H₂SO₄) using three- and two-electrode systems. The HRG//m-WO₃ ASC exhibits a maximum specific capacitance of 389 F g⁻¹ at a current density of 0.5 A g⁻¹, with an associated high energy density of 93 Wh kg⁻¹ at a power density of 500 W kg⁻¹ in a wide 1.6 V operating potential window. In addition, the HRG//m-WO₃ ASC displays long-term cycling stability, maintaining 92 % of the original specific capacitance after 5000 galvanostatic charge–discharge cycles. The m-WO₃ nanoplates were prepared hydrothermally while HRG was synthesized by a modified Hummers method.     

具有高效电化学储能的中空网状笼还原氧化石墨烯

通过ZnO模板辅助电沉积法制备了中空网状笼还原氧化石墨烯,具有纳米管、多孔结构、网状结构和3D微米中空笼等多层次架构. 这样的结构能够同时促进电化学活性物种的传输,提高电极材料的利用率,以及提升超级电容器性能. 该类中空网状笼还原氧化石墨烯做超级充电器电极材料时表现出了优良的电化学性能,研究结果显示,在1.0 A•g^-1时比电容达到393 F•g^-1. 而且当电流密度从1.0 A•g^-1增加到20 A•g^-1,电容仅衰减了21.2%,10000周循环后比电容损失小于1%,表明具有优异的电容稳定性.     

Systematic Comparison of Graphene Materials for Supercapacitor Electrodes

A comparison of the performance of graphene-based supercapacitors is difficult, owing to the variety of production methods used to prepare the materials. To the best of our knowledge, there has been no systematic investigation into the effect of the graphene production method on the supercapacitor performance. In this work, we compare graphene produced through several routes. This includes anodic and cathodic electrochemically exfoliated graphene, liquid phase exfoliated graphene, graphene oxide, reduced graphene oxide, and graphene nanoribbons. Graphene oxide exhibited the highest capacitance of approximately 154 F g⁻¹ in 6 M KOH at 0.5 A g⁻¹ attributed to oxygen functional groups giving an additional pseudocapacitance and preventing significant restacking; however, the capacitance retention was poor, owing to the low conductivity. In comparison, the anodic electrochemically exfoliated graphene exhibited a capacitance of approximately 44 F g⁻¹, the highest of the ‘pure’ graphene materials, which all exhibited superior capacitance retention, owing to their higher conductivity. The cyclability of all of the materials, with the exception of reduced graphene oxide (70 %), was found to be greater than 95 % after 10 000 cycles. These results highlight the importance of matching the graphene production method with a specific application; for example, graphene oxide and anodic electrochemically exfoliated graphene would be best suited for high energy and power applications, respectively.     

天然橡胶/石墨烯纳米复合材料的制备及耐核辐射性能

采用乳液共混和原位还原法制备了天然橡胶(NR)/还原氧化石墨烯(RGO)纳米复合材料,研究了γ射线辐照对复合材料力学性能和热稳定性的影响.研究结果表明,RGO以少数几层堆叠片层结构均匀分散于NR基体中.RGO的加入可显著提高NR的力学性能和热稳定性,加入质量分数为0.6%的RGO可使材料拉伸强度由(22±1.4)MPa提升至(25±1.1)MPa,质量损失50%对应的温度(T50)升高6.4℃.经200 k Gy的γ射线辐射后,纯NR的拉伸强度和T50分别下降了75%和4.5℃,而NR/RGO-0.6%复合体系仅分别下降了56%和1.2℃.揭示了RGO提高材料耐辐射性能的机理,由于RGO可捕捉猝灭因辐射产生的自由基,从而减弱了辐射老化降解和交联反应的发生.     

氧化石墨烯水热还原前后的发光光谱

分别采用改进Hummers方法和水热还原法制备了氧化石墨烯(GO)和还原氧化石墨烯(RGO)。 GO和RGO经透射电子显微镜(TEM)、紫外-可见吸收光谱(UV-Vis)、红外光谱(IR)、荧光发射和激发光谱(PL、PLE)等技术手段进行了表征。 荧光发射光谱显示,氧化石墨烯(GO)在可见光的激发下可以得到波长在600~800 nm范围内的宽谱近红外荧光。 通过比较氧化石墨烯水热还原前后的光谱变化,发现氧化石墨烯近红外荧光起源于氧化石墨烯的表面含氧基团,如C=O、COOH。 近红外荧光穿透性好、对生物组织损坏小,非常适合于生物成像,预示着氧化石墨烯在生物成像方面的应用潜力。     

Controllable Preparation of Polyaniline–Graphene Nanocomposites using Functionalized Graphene for Supercapacitor Electrodes

In order to explore the effect of graphene surface chemistry on electrochemical performance based on polyaniline–graphene hybrid material electrodes, four different polyaniline–graphene nanocomposites were fabricated with graphene oxide, reduced graphene oxide, aminated graphene and sulfonated graphene as carriers, respectively. The nanocomposites feature various structures and morphologies, which could be used to more deeply understand the morphology and structure effects caused by surface chemistry on electrochemical performance. The experimental results reveal that functionalized electronegative graphene was conducive to the vertical and neat growth of polyaniline (PANI) nanorods. The array architecture endowed the PANI–GS nanocomposite with a large ion‐accessible surface area and high‐efficiency electron‐ and ion‐transport pathways. Meanwhile, the introduction of sulfonic acid functional groups accelerated the redox reaction with doping and dedoping of the PANI. Thereby, the PANI–GS nanocomposite exhibited a high specific capacitance of 863.2 F g^?1 at a current density of 0.2 A g^?1 and the excellent rate capability of 67.4 % (581.6 F g^?1 at 5 A g^?1), which were much better than the other three nanocomposites produced.