Calcium-amidoborane-ammine complexes: thermal decomposition of model systems

Hydrocarbon-soluble model systems for the calcium-amidoborane-ammine complex Ca(NH(2)BH(3))(2)?(NH(3))(2) were prepared and structurally characterized. The following complexes were obtained by the reaction of RNH(2)BH(3) (R = H, Me, iPr, DIPP; DIPP = 2,6-diisopropylphenyl) with Ca(DIPP-nacnac)(NH(2))?(NH(3))(2) (DIPP-nacnac = DIPP-NC(Me)CHC(Me)N-DIPP): Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))(2), Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))(3), Ca(DIPP-nacnac)[NH(Me)BH(3)]?(NH(3))(2), Ca(DIPP-nacnac)[NH(iPr)BH(3)]?(NH(3))(2), and Ca(DIPP-nacnac)[NH(DIPP)BH(3)]?NH(3). The crystal structure of Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3)(3) showed a NH(2)BH(3)(-) unit that was fully embedded in a network of BH???HN interactions (range: 1.97(4)-2.39(4)??) that were mainly found between NH(3) ligands and BH(3) groups. In addition, there were N-H???C interactions between NH(3) ligands and the central carbon atom in the ligand. Solutions of these calcium-amidoborane-ammine complexes in benzene were heated stepwise to 60?°C and thermally decomposed. The following main conclusions can be drawn: 1)?Competing protonation of the DIPP-nacnac anion by NH(3) was observed; 2)?The NH(3) ligands were bound loosely to the Ca(2+) ions and were partially eliminated upon heating. Crystal structures of [Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))](∞), Ca(DIPP-nacnac)(NH(2)BH(3))?(NH(3))?(THF), and [Ca(DIPP-nacnac){NH(iPr)BH(3)}](2) were obtained. 3)?Independent of the nature of the substituent R in NH(R)BH(3), the formation of H(2) was observed at around 50?°C. 4)?In all cases, the complex [Ca(DIPP-nacnac)(NH(2))](2) was formed as a major product of thermal decomposition, and its dimeric nature was confirmed by single-crystal analysis. We proposed that thermal decomposition of calcium-amidoborane-ammine complexes goes through an intermediate calcium-hydride-ammine complex which eliminates hydrogen and [Ca(DIPP-nacnac)(NH(2))](2). It is likely that the formation of metal amides is also an important reaction pathway for the decomposition of metal-amidoborane-ammine complexes in the solid state.     

Ditopic hydridoborates and hydridoboranes: bridging ligands in coordination polymers and versatile hydroboration reagents

Single crystals of the meta- and para-phenylene-bridged ditopic trihydridoborates (Li(THF)(2))(2)[m-C(6)H(4)(BH(3))(2)] and (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)] have been prepared and investigated by X-ray crystallography. The compounds turned out to be coordination polymers in which each trihydridoborate substituent is connected with one trihydridoborate substituent of a neighbouring monomer via two bridging Li(THF)(2)(+) ions. (Li(THF)(2))(2)[m-C(6)H(4)(BH(3))(2)] and (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)] suffer from poor solubility in all common non-protic solvents. Thus, a more soluble derivative of (Li(THF)(2))(2)[p-C(6)H(4)(BH(3))(2)], equipped with n-hexyl groups at the positions 2 and 5 of the phenylene ring, has been used for all further investigations (i.e., compound Li(2)[6]). Treatment of Li(2)[6] with Me(3)SiCl in the presence of excess N(Me)(2)Et leads to the abstraction of one hydride ion per boron atom under formation of the ditopic amine-borane adduct p-C(6)H(2)(n-hexyl)(2)(BH(2)-N(Me)(2)Et)(2) (7). The compound turned out to be an efficient hydroboration reagent both for internal olefins (i.e., 1,5-cyclooctadiene) and terminal alkynes (i.e., tert-butyl acetylene) to give p-C(6)H(2)(n-hexyl)(2)(9-BBN)(2) (8; 9-BBN = 9-borabicyclo[3.3.1]nonyl) and p-C(6)H(2)(n-hexyl)(2)(B(C(H)=C(H)tBu)(2))(2) (9), respectively.     

Stoichiometric reactivity of dialkylamine boranes with alkaline earth silylamides

Reactions of β-diketiminato group 2 silylamides, [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)M(THF)(n){N(SiMe(3))(2)}] (M = Mg, n = 0; M = Ca, Sr, n = 1), and an equimolar quantity of pyrrolidine borane, (CH(2))(4)NH·BH(3), were found to produce amidoborane derivatives of the form [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)MN(CH(2))(4)·BH(3)]. In reactivity reminiscent of analogous reactions performed with dimethylamine borane, addition of a second equivalent of (CH(2))(4)NH·BH(3) to the Mg derivative induced the formation of a species, [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)Mg{N(CH(2))(4) BH(2)NMe(2)BH(3)}], containing an anion in which two molecules of the amine borane substrate have been coupled together through the elimination of one molecule of H(2). Both this species and a calcium amidoborane derivative have been characterised by X-ray diffraction techniques and the coupled species is proposed as a key intermediate in catalytic amine borane dehydrocoupling, in reactivity dictated by the charge density of the group 2 centre involved. On the basis of further stoichiometric reactions of the homoleptic group 2 silylamides, [M{N(SiMe(3))(2)}(2)] (M = Mg, Ca, Sr, Ba), with (CH(3))(2)NH·BH(3) and (i)Pr(2)NH·BH(3) reactivity consistent with successive amidoborane β-hydride elimination and [R(2)N[double bond, length as m-dash]BH(2)] insertion is described as a means to induce the B-N dehydrocoupling between amine borane substrates.     

Synthesis and structural diversity of barium (N,N-dimethylamino)diboranates

The reaction of a slurry of BaBr(2) in a minimal amount of tetrahydrofuran (THF) with 2 equiv of Na(H(3)BNMe(2)BH(3)) in diethyl ether followed by crystallization from diethyl ether at -20 °C yields crystals of Ba(H(3)BNMe(2)BH(3))(2)(Et(2)O)(2) (1). Drying 1 at room temperature under vacuum gives the partially desolvated analogue Ba(H(3)BNMe(2)BH(3))(2)(Et(2)O)(x) (1') as a free-flowing white solid, where the value of x varies from <0.1 to about 0.4 depending on whether desolvation is carried out with or without heating. The reaction of 1 or 1' with Lewis bases that bind more strongly to barium than diethyl ether results in the formation of new complexes Ba(H(3)BNMe(2)BH(3))(2)(L), where L = 1,2-dimethoxyethane (2), N,N,N',N'-tetramethylethylenediamine (3), 12-crown-4 (4), 18-crown-6 (5), N,N,N',N'-tetraethylethylenediamine (6), and N,N,N',N",N"-pentamethylethylenetriamine (7). Recrystallization of 4 and 5 from THF affords the related compounds Ba(H(3)BNMe(2)BH(3))(2)(12-crown-4)(THF)·THF (4') and Ba(H(3)BNMe(2)BH(3))(2)(18-crown-6)·2THF (5'). In addition, the reaction of BaBr(2) with 2 equiv of Na(H(3)BNMe(2)BH(3)) in the presence of diglyme yields Ba(H(3)BNMe(2)BH(3))(2)(diglyme)(2) (8), and the reaction of 1 with 15-crown-5 affords the diadduct [Ba(15-crown-5)(2)][H(3)BNMe(2)BH(3)](2) (9). Finally, the reaction of BaBr(2) with Na(H(3)BNMe(2)BH(3)) in THF, followed by the addition of 12-crown-4, affords the unusual salt [Na(12-crown-4)(2)][Ba(H(3)BNMe(2)BH(3))(3)(THF)(2)] (10). All of these complexes have been characterized by IR and (1)H and (11)B NMR spectroscopy, and the structures of compounds 1-3, 4', 5', and 6-10 have been determined by single-crystal X-ray diffraction. As the steric demand of the Lewis bases increases, the structure changes from polymers to dimers to monomers and then to charge-separated species. Despite the fact that several of the barium complexes are monomeric in the solid state, none is appreciably volatile up to 200 °C at 10(-2) Torr.     

Synthesis and structure of divalent thulium borohydrides, and their application in ε-caprolactone polymerisation

The new divalent thulium compound [Tm(BH(4))(2)(DME)(2)] could be prepared by reduction of [Tm(BH(4))(3)(THF)(3)] or from TmI(2) and KBH(4). It was used as a precursor to the divalent [(Tp(tBu,Me))Tm(BH(4))(THF)] by reaction with potassium tris(2-tBu-4-Me)pyrazolylborate (KTp(tBu,Me)). Both Tm(II) compounds were found active as ε-caprolactone polymerisation catalysts.     

Theoretical Study of Metal-Tetrahydroborato Ligand Interactions in [Y(THF)(4)(BH(4))(2)](+)

Ab initio calculations for the [Y(H(2)O)(4)(BH(4))(2)](+) complex, a model of [Y(THF)(4)(BH(4))(2)](+), have been carried out to study the metal-BH(4)(-) ligand interactions. Our calculations for various isomers with different BH(4)(-) coordination modes allow us to explore the electronic and electrostatic interactions in details. It is found that both electronic and electrostatic effects are of almost equal importance.     

Syntheses and structures of lanthanide borohydrides supported by a bridged bis(amidinate) ligand and their high activity for controlled polymerization of ε-caprolactone, L-lactide and rac-lactide

Metathesis reaction of LLnCl(THF)(2) [L = (Me(3)SiNC(C(6)H(5))N)(2)(CH(2))(3)] with NaBH(4) in a 1 : 1.5 molar ratio in THF (THF = tetrahydrofuran) at 60 °C afforded the monoborohydride LLn(BH(4))(DME) [Ln = Y (1), Nd (2), Sm(3) and Yb(4)] crystallized from DME solution (DME = dimethoxyethane). Crystal structure analyses revealed 1-4 are monomers, in which each metal is ligated by one L ligand, one η(3)-BH(4) group and one DME molecule in a trigonal bipyramid geometry. Complexes 1-4 were found to be very active single-site initiators for the controlled ring opening polymerization of ε-caprolactone (ε-CL) and L-lactide (L-LA) as judged by relatively narrow molecular weight distributions (M(w)/M(n): 1.34-1.50) and experimental values M(n)(exp) were in good agreement with theoretic values M(n)(theo). The highest activity and the best control over the molecular weight for both monomers were found for the system with 2. These monoborohydride complexes can also initiate the ring opening polymerization of rac-LA to gave heterotactically enriched polyLA with Pr (heterotactic enrichment) values in a range of 0.69-0.85 depending on the lanthanide metals and the most effective heterotactic enrichment (Pr) was found for 1 (Pr = 0.85). Moreover, complex 1 initiated the polymerization of rac-LA in a living fashion.     

Organometallic early lanthanide clusters: syntheses and X-ray structures of new monocyclopentadienyl complexes

The reaction of Ln(BH(4))(3)(THF)(3) or LnCl(3)(THF)(3) with 1 equiv of KCp*' ligand (Cp' = C(5)Me(4)n-Pr) afforded the new monocyclopentadienyl complexes Cp*'LnX(2)(THF)(n) (X = BH(4), Ln = Sm, n = 1, 1a, Ln = Nd, n = 2, 1b; X = Cl, Ln = Sm, n = 1, 3a) and [Cp*'LnX(2)](n') (X = BH(4), n' = 6, Ln = Sm, 2a, Ln = Nd, 2b; X = Cl, Ln = Nd, 4b). All these compounds were characterized by elemental analysis and (1)H NMR. Crystals of mixed borohydrido/chloro-bridged [Cp*'(6)Ln(6)(BH(4))(12-x))Cl(x)(THF)(n')] (x = 10, n' = 4, Ln = Sm, 2a', Ln = Nd, 2b'; x = 5, n = 2, Ln = Sm, 2a' ') were also isolated. Compounds 2a, 2b, 2a', 2b', and 2a' were structurally characterized; they all exhibit a hexameric structure in the solid state containing the [Cp*(3)Ln(3)X(5)(THF)] building block. The easy clustering of THF adducts first isolated is illustrative of the well-known bridging ability of the BH(4) group. Hexameric 2a was found to be unstable in the presence of THF vapors; this may be correlated to the opening of unsymmetrical borohydride bridges observed in the molecular structure.     

Scandium and yttrium metallocene borohydride complexes: comparisons of (BH4)1- vs. (BPh4)1- coordination and reactivity

The synthetically accessible borohydride complexes (C(5)Me(4)H)(2)Ln(THF)(BH(4)) and (C(5)Me(5))(2)Ln(THF)(BH(4)) (Ln = Sc, Y) were examined as precursors alternative to the heavily-used tetraphenylborate analogs, [(C(5)Me(4)H)(2)Ln][BPh(4)] and [(C(5)Me(5))(2)Ln][BPh(4)], employed in LnA(2)A'/M reduction reactions (A = anion; M = alkali metal) that generate "LnA(2)" reactivity and form reduced dinitrogen complexes [(C(5)R(5))(2)(THF)(x)Ln](2)(μ-η(2):η(2)-N(2)) (x = 0, 1). The crystal structures of the yttrium borohydrides, (C(5)Me(4)H)(2)Y(THF)(μ-H)(3)BH, 1, and (C(5)Me(5))(2)Y(THF)(μ-H)(2)BH(2), 2, were determined for comparison with those of the yttrium tetraphenylborates, [(C(5)Me(4)H)(2)Y][(μ-Ph)(2)BPh(2)], 3, and [(C(5)Me(5))(2)Y][(μ-Ph)(2)BPh(2)], 4. The complex (C(5)Me(4)H)(2)Sc(μ-H)(2)BH(2), 5, was synthesized and structurally characterized for comparison with (C(5)Me(5))(2)Sc(μ-H)(2)BH(2), 6, [(C(5)Me(4)H)(2)Sc][(μ-Ph)BPh(3)], 7, and [(C(5)Me(5))(2)Sc][(μ-Ph)BPh(3)], 8. Structural information was also obtained on the borohydride derivatives, (C(5)Me(4)H)(2)Sc(μ-H)(2)BC(8)H(14), 9, and (C(5)Me(5))(2)Sc(μ-H)(2)BC(8)H(14), 10, obtained from 9-borabicyclo(3.3.1)nonane (9-BBN) and (C(5)Me(4)R)(2)Sc(η(3)-C(3)H(5)), where R = H, 11; Me, 12. The preference of the metals for borohydride over tetraphenylborate binding was shown by the facile displacement of (BPh(4))(1-) in 3, 4, 7, and 8 by (BH(4))(1-) to make the respective borohydride complexes 1, 2, 5, and 6. These results are consistent with the fact that the borohydrides are not as useful as precursors in A(2)LnA'/M reductions of N(2). An unusual structural isomer of [(C(5)Me(4)H)(2)Sc](2)(μ-η(2):η(2)-N(2)), 13', was isolated from this study that shows the variations in ligand orientation that can occur in the solid state.     

Improved dehydrogenation properties of Ca(BH4)2-LiNH2 combined system

Ca(BH(4))(2)-LiNH(2) combined system is shown to release hydrogen at much lower temperature compared to the pure Ca(BH(4))(2). The improved dehydrogenation in this system can be ascribed to a combination reaction between [BH(4)] and [NH(2)] based on the reaction mechanism of positive H and negative H.     

Unsymmetrically substituted 9,10-dihydro-9,10-diboraanthracenes as versatile building blocks for boron-doped π-conjugated systems

The targeted hydrolysis of the 9,10-dihydro-9,10-diboraanthracene adduct (Me(2)S)HB(C(6)H(4))(2)BH(SMe(2)) (1) with 0.5 equiv of H(2)O leads to formation of the borinic acid anhydride [(Me(2)S)HB(C(6)H(4))(2)B](2)O (2) and thereby provides access to the field of unsymmetrically substituted 9,10-dihydro-9,10-diboraanthracenes. Compound 2 reacts with tBuC≡CH to give the corresponding vinyl derivative in an essentially quantitative conversion. Subsequent cleavage of the B-O-B bridge by LiAlH(4) with formation of hydridoborate functionalities is possible but is accompanied by partial B-C(vinyl) bond degradation. This situation changes when the related mesityl derivative [MesB(C(6)H(4))(2)B](2)O (7) is employed, which can be synthesized from BrB(C(6)H(4))(2)BBr (6) by treatment with 1 equiv of MesMgBr and subsequent hydrolysis. The reaction of 7 with LiAlH(4) in tetrahydrofuran (THF) furnishes Li[MesB(C(6)H(4))(2)BH(2)] (8); hydride elimination with Me(3)SiCl leads to formation of the THF adduct MesB(C(6)H(4))(2)BH(THF) (9·THF). Alternatively, 7 can be transformed into the bromoborane MesB(C(6)H(4))(2)BBr (10) by treatment with BBr(3). A Br/H-exchange reaction between 10 and Et(3)SiH yields the donor-free borane MesB(C(6)H(4))(2)BH (9), which forms B-H-B bridged dimers (9)(2) in the solid state. The vinyl borane MesB(C(6)H(4))(2)BC(H)=C(H)Mes (14) is accessible from MesC≡CH and either 9·THF or 9. Compared with the related compound Mes(2)BC(H)=C(H)Mes, the electronic absorption and emission spectra of 14 reveal bathochromic shifts of Δλ(abs)=17 nm and Δλ(em)=74 nm, which can be attributed to the rigid, fully delocalized π framework of the [MesB(C(6)H(4))(2)B] chromophore.     

Role of NH3 in the dehydrogenation of calcium amidoborane ammoniate and magnesium amidoborane ammoniate: a first-principles study

First-principles calculations show that [NH(3)] molecules play crucial roles as both activator for the break-up of B-H bond and supplier of protic H for the establishment of dihydrogen bonding, which could facilitate the dehydrogenation of Ca(NH(2)BH(3))(2)·2NH(3) or Mg(NH(2)BH(3))(2)·NH(3) occurring at lower temperatures compared to those of Ca(NH(2)BH(3))(2) and Mg(NH(2)BH(3))(2). Moreover, the calculations of Helmholtz Free energy and [NH(3)] molecule removal energy evidence that coordination between [NH(3)] and Mg cation is stronger than that between [NH(3)] and Ca cation; therefore, Mg(NH(2)BH(3))(2)·NH(3) will undergo directly dehydrogenation rather than deammoniation at lower temperatures.     

Lanthanide and uranium complexes with an SPS-based pincer ligand

Reactions of Ln(BH4)3(THF)n and [Li(Et2O)]SPS(Me)], the lithium salt of an anionic SPS pincer ligand composed of a central hypervalent lambda4-phosphinine ring bearing two ortho-positioned diphenylphosphine sulfide sidearms, led to the monosubstituted compounds [Ln(BH4)2(SPS(Me))(THF)2] [Ln = Ce (1), Nd (2)], while the homoleptic complexes [Ln(SPS(Me))3] [Ln = Ce (3), Nd (4)] were obtained by treatment of LnX3 (X = I, BH4) with [K(Et2O)][SPS(Me)]. The [UX2(SPS(Me))2] complexes [X = Cl (5), BH4 (6)] were isolated from reactions of UX4 and the lithium or potassium salt of the [SPS(Me)]- anion. The X-ray crystal structures of 1.1.5THF, 2.1.5THF, 3.2THF.2Et2O, and 5.4py reveal that the flexible tridentate [SPS(Me)]- anion is bound to the metal as a tertiary phosphine with electronic delocalization within the unsaturated parts of the ligand.     

Synthesis, structures and stabilities of thioanisole-functionalised phosphido-borane complexes of the alkali metals

Treatment of the secondary phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) with BH(3)·SMe(2) gives the corresponding phosphine-borane {(Me(3)Si)(2)CH}PH(BH(3))(C(6)H(4)-2-SMe) (9) as a colourless solid. Deprotonation of 9 with n-BuLi, PhCH(2)Na or PhCH(2)K proceeds cleanly to give the corresponding alkali metal complexes [[{(Me(3)Si)(2)CH}P(BH(3))(C(6)H(4)-2-SMe)]ML](n) [ML = Li(THF), n = 2 (10); ML = Na(tmeda), n = ∞ (11); ML = K(pmdeta), n = 2 (12)] as yellow/orange crystalline solids. X-ray crystallography reveals that the phosphido-borane ligands bind the metal centres through their sulfur and phosphorus atoms and through the hydrogen atoms of the BH(3) group in each case, leading to dimeric or polymeric structures. Compounds 10-12 are stable towards both heat and ambient light; however, on heating in toluene solution in the presence of 10, traces of free phosphine-borane 9 are slowly converted to the free phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) (5) with concomitant formation of the corresponding phosphido-bis(borane) complex [{(Me(3)Si)(2)CH}P(BH(3))(2)(C(6)H(4)-2-SMe)]Li (14).     

A new ammine dual-cation (Li, Mg) borohydride: synthesis, structure, and dehydrogenation enhancement

A new ammine dual-cation borohydride, LiMg(BH(4))(3)(NH(3))(2), has been successfully synthesized simply by ball-milling of Mg(BH(4))(2) and LiBH(4)·NH(3). Structure analysis of the synthesized LiMg(BH(4))(3)(NH(3))(2) revealed that it crystallized in the space group P6(3) (no. 173) with lattice parameters of a=b=8.0002(1) ?, c=8.4276(1) ?, α=β=90°, and γ=120° at 50 °C. A three-dimensional architecture is built up through corner-connecting BH(4) units. Strong N-H···H-B dihydrogen bonds exist between the NH(3) and BH(4) units, enabling LiMg(BH(4))(3)(NH(3))(2) to undergo dehydrogenation at a much lower temperature. Dehydrogenation studies have revealed that the LiMg(BH(4))(3)(NH(3))(2)/LiBH(4) composite is able to release over 8 wt% hydrogen below 200 °C, which is comparable to that released by Mg(BH(4))(3)(NH(3))(2). More importantly, it was found that release of the byproduct NH(3) in this system can be completely suppressed by adjusting the ratio of Mg(BH(4))(2) and LiBH(4)·NH(3). This chemical control route highlights a potential method for modifying the dehydrogenation properties of other ammine borohydride systems.     

Titanium, zinc and alkaline-earth metal complexes supported by bulky O,N,N,O-multidentate ligands: syntheses, characterisation and activity in cyclic ester polymerisation

The reactions of the bulky amino-bis(phenol) ligand Me(2)NCH(2)CH(2)N[CH(2)-3,5-Bu(t)(2)-C(6)H(2)OH-2](2)(1-H(2)) with Zn[N(SiMe(3))(2)](2)(4), [Mg[N(SiMe(3))(2)](2)](2)(5) and Ca[N(SiMe(3))(2)](2)(THF)(2)(6) yield the complexes 1-Zn, 1-Mg and 1-Ca in good yields. The X-ray structure of 1-Ca showed the complex to be dimeric, with calcium in a distorted octahedral coordination geometry. Five of the positions are occupied by an N(2)O(3) donor set, while the sixth is taken up by an intramolecular close contact to an o-Bu(t) substituent, a rare case of a Ca...H-C agostic interaction (Ca...H distances of 2.37 and 2.41 Angstroms). Another sterically hindered calcium complex, Ca[2-Bu(t)-6-(C(6)F(5)N=CH)C(6)H(3)O](2)(THF)(2).(C(7)H(8))(2/3)(7), was prepared by reaction of 6 with the iminophenol 2-Bu(t)-6-(C(6)F(5)N=CH)C(6)H(3)OH (3-H). According to the crystal structure 7 is monomeric and octahedral, with trans THF ligands. The complex Ti[N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)O-2](2)[CH(2)CH(2)NMe(2)]](OPr(i))(2)(2-Ti) was prepared by treatment of Ti(OPr(i)(4)) with the new amino-bis(phenol) Me(2)NCH(2)CH(2)N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)OH-2](2)(2-H(2)). The reduction of 2-Ti with sodium amalgam gave the titanium(III) salt Ti[N[CH(2)-3-Bu(t)-5-Me-C(6)H(2)O-2](2)[CH(2)CH(2)NMe(2)]](OPr(i))(2).Na(THF)(2)(8). A comparison of the X-ray structures of 2-Ti and 8 showed that the additional electron in 8 significantly reduced the intensity of the pi-bonding from the oxygen atoms of the isopropoxide groups to titanium. 1-Ca and 8 were active initiators for the ring-opening polymerisation of epsilon-caprolactone (up to 97% conversion of 200 equivalents in 2 hours) and yielded polymers with narrow molecular weight distributions.     

Experimental and computational study of the formation mechanism of the diammoniate of diborane: the role of dihydrogen bonds

The mechanism of formation of ammonia borane (NH(3)BH(3), AB) and the diammoniate of diborane ([H(2)B(NH(3))(2)][BH(4)], DADB) in the reaction between NH(3) and THF·BH(3) was explored experimentally and computationally. Ammonia diborane (NH(3)BH(2)(μ-H)BH(3), AaDB), a long-sought intermediate proposed for the formation of DADB, was directly observed in the reaction using (11)B NMR spectroscopy. The results indicate that dihydrogen bonds between the initially formed AB and AaDB accelerate the formation of DADB in competition with the formation of AB.     

Electronic structure of M(BH4)4, M = Zr, Hf, and U, by variable photon-energy photoelectron spectroscopy and density functional calculations

Photoelectron (PE) spectra have been obtained for the M(BH(4))(4) (M = Zr, Hf and U) molecules in the 20-60 eV photon-energy range, and for M = U, also in the 90-120 eV region. Derived branching ratios (BR) and relative partial-photoionization cross sections (RPPICS) of the valence bands are used to confirm band assignment and demonstrate d-orbital covalency for all three compounds and f-orbital covalency for U(BH(4))(4). Core ionizations are identified and used to confirm resonance features in the RPPICS. The absorption spectrum of Zr(BH(4))(4) between 20 and 60 eV shows 4p absorption at 35.5 eV, coincident with the 4p-4d resonance in the RPPICS of the 1e and 2t(2) ionization bands of Zr(BH(4))(4). Less intense absorption bands at 32.5 and 33.8 eV correspond with shape resonance features in the 1a(1) and 1t(2) PE bands. The RPPICS of the f band of U(BH(4))(4) shows two strong resonant features between 95 and 120 eV. Direct photoemission of the 5f electrons from U(BH(4))(4) results only in the observation of the (2)F(5/2) ion state of [U(BH(4))(4)](+), but in the 5d-5f resonant region, a weak band corresponding to the (2)F(7/2) ion state is also observed. The splitting of the 1t(2) band of U(BH(4))(4) is attributed to a small contribution of U 6p semi-core electrons to this MO. Density functional calculations give a good estimate of the pattern of ionization energies, although the calculated absolute values are lower than the experimental values, the first IE by 0.5 eV for Zr(BH(4))(4) and Hf(BH(4))(4) and 1.0 eV for U(BH(4))(4). The MO compositions are in very good agreement with the deductions made from the BR and RPPICS analyses.     

Probing Lewis acidity of Y(BH4)3 via its reactions with MBH4 (M = Li, Na, K, NMe4)

High-energy milling of Y(BH(4))(3) (containing LiCl as a by-product, which has not been removed) with MBH(4) (M = Li, Na, K, (CH(3))(4)N) leads to the first two examples of quasi-ternary yttrium borohydrides: KY(BH(4))(4) and (CH(3))(4)NY(BH(4))(4), while no chemical reaction is observed for LiBH(4) and NaBH(4). KY(BH(4))(4) is isostructural to NaSc(BH(4))(4) (Cmcm, a = 8.5157(4) ?, b = 12.4979(6) ?, c = 9.6368(5) ?, V = 1025.62(9) ?(3), Z = 4), while (CH(3))(4)NY(BH(4))(4) crystallises in primitive orthorhombic cell, similarly to KSc(BH(4))(4) (Pnma, a = 15.0290(10) ?, b = 8.5164(6) ?, c = 12.0811(7) ?, V = 1546.29(17) ?(3), Z = 4). The thermal decomposition of hydrogen-rich KY(BH(4))(4) (8.6 wt.% H) involves the formation of an unidentified intermediate at 200 °C and recovery of KBH(4) at higher temperatures; at 410 °C, KCl and YH(2) are observed. The thermal decomposition of (CH(3))(4)NY(BH(4))(4) occurs via two partly overlapping endothermic steps with concomitant emission of H(2) and organic compounds. Heating of a NaBH(4)/Y(BH(4))(3) mixture above 165 °C results in a mixed-cation mixed-anion borohydride, NaY(BH(4))(2)Cl(2), but not NaY(BH(4))(4). The reduced reactivity of Y(BH(4))(3) towards borohydride Lewis bases when compared to hypothetical scandium borohydride can be explained by the lower Lewis acidity of Y(BH(4))(3) than Sc(BH(4))(3).     

Li-Na ternary amidoborane for hydrogen storage: experimental and first-principles study

Li-Na ternary amidoborane, Na[Li(NH(2)BH(3))(2)], was recently synthesized by reacting LiH and NaH with NH(3)BH(3). This mixed-cation amidoborane shows improved dehydrogenation performance compared to that of single-cation amidoboranes, i.e., LiNH(2)BH(3) and NaNH(2)BH(3). In this paper, we synthesized the Li-Na ternary amidoborane by blending and re-crystallizing equivalent LiNH(2)BH(3) and NaNH(2)BH(3) in tetrahydrofuran (THF), and employed first-principles calculations and the special quasirandom structure (SQS) method to theoretically explore the likelihood for the existence of Li(1-x)Na(x)(NH(2)BH(3)) for various Li/Na ratios. The thermodynamic, electronic and phononic properties were investigated to understand the possible dehydrogenation mechanisms of Na[Li(NH(2)BH(3))(2)].