Colloidal stability of magnetic iron oxide nanoparticles: influence of natural organic matter and synthetic polyelectrolytes

The colloidal behavior of natural organic matter (NOM) and synthetic poly(acrylic acid) (PAA)-coated ferrimagnetic (γFe(2)O(3)) nanoparticles (NPs) was investigated. Humic acid (HA), an important component of NOM, was extracted from a peat soil. Two different molecular weight PAAs were also used for coating. The colloidal stability of the coated magnetic NPs was evaluated as a resultant of the attractive magnetic dipolar and van der Waals forces and the repulsive electrostatic and steric-electrosteric interactions. The conformational alterations of the polyelectrolytes adsorbed on magnetic γFe(2)O(3) NPs and their role in colloidal stability were determined. Pure γFe(2)O(3) NPs were extremely unstable because of aggregation in aqueous solution, but a significant stability enhancement was observed after coating with polyelectrolytes. The steric stabilization factor induced by the polyelectrolyte coating strongly dictated the colloidal stability. The pH-induced conformational change of the adsorbed, weakly charged polyelectrolytes had a significant effect on the colloidal stability. Atomic force microscopy (AFM) revealed the stretched conformation of the HA molecular chains adsorbed on the γFe(2)O(3) NP surface at pH 9, which enhanced the colloidal stability through long-range electrosteric stabilization. The depletion of the polyelectrolyte during the dilution of the NP suspension decreased the colloidal stability under acidic solution conditions. The conformation of the polyelectrolytes adsorbed on the NP surface was altered as a function of the substrate surface charge as viewed from AFM imaging. The polyelectrolyte coating also led to a reduction in magnetic moments and decreased the coercivity of the coated γFe(2)O(3) NPs. Thus, the enhanced stabilization of the coated maghematite NPs may facilitate their delivery in the groundwater for the effective removal of contaminants.     

Colloid surface engineering via deposition of multilayered thin films from polyelectrolyte blend solutions

Multilayer thin films were constructed on polystyrene colloidal particles by depositing alternating layers of poly(allylamine hydrochloride) (PAH) at pH 7.5 and varying composition blends of poly(acrylic acid) (PAA) and poly(styrenesulfonate) (PSS) at pH 3.5. Following the deposition of each layer, microelectrophoresis experiments showed alternating zeta-potentials, suggesting the formation of multilayered films on the particles. Scanning and transmission electron microscopy were used to examine the surface morphology of the colloidal particles, with homogeneous surface coatings apparent for films deposited from PAA/PSS blend solutions containing up to 90 wt % PAA. The colloidal stability of these particles is greater than those coated with individual PAH and PAA layers. In the case of the blend PAA/PSS = 25:75 wt %, up to 20 layers were assembled without compromising the colloidal stability of the dispersion. The results demonstrate that the deposition of layers from PE blend solutions containing a strong and weak PE can be used as a facile method for controlling the surface properties and hence the colloidal stability of core-shell particles, as well as the thickness and morphology of the coatings. Control of these parameters is important for subsequent processing and application of these particles in controlled delivery, photonics, catalytic, and separation applications.     

Stability of dispersions of colloidal hematite/yttrium oxide core-shell particles

The colloidal stability of suspensions of hematite/yttria core/shell particles is investigated in this work and compared with that of the pure hematite cores. The different electrical surface characteristics of yttrium and iron oxides, as well as the diameters of both types of spherical particles, dominate the overall process of particle aggregation. The aggregation kinetics of the suspensions was followed by measuring their optical absorbance as a function of time. By previously calculating the extinction cross section of particle doublets, it was demonstrated that for both core and core/shell particles the turbidity of the suspensions should increase on aggregation. Such an increase was in fact found in the systems in spite of the ever-present tendency of the particles to settle under gravity. The authors used the initial slope of the turbidity increment time plots as a measure of the ease of aggregation between particles. Thus, they found that the essential role played by pH on the charge generation on the two oxides and the shift of one pH unit between the isoelectric points of hematite and yttria manifest in two features: (i) the stability decreases on approaching the isoelectric point from either the acid or basic side and (ii) the maximum instability is found for hematite at pH 7 and for hematite/yttria at pH 8, that is, close to the isoelectric points of alpha-Fe(2)O(3) and Y(2)O(3), respectively. The role of added electrolyte is simply to yield the suspensions of either type more unstable. Using the surface free energy of the particles, the authors could estimate their Hamaker constants in water. From these and their zeta potentials, the DLVO theory of stability was used to quantitatively explain their results.     

Synthesis and characterization of poly(acrylic acid) stabilized cadmium sulfide quantum dots

Cadmium sulfide (CdS) nanoparticles (NPs) capped with poly(acrylic acid) (PAA) were prepared in aqueous solutions from Cd(NO3)2 and Na2S. Influence of the COOH/Cd ratio (0.8-12.5), reaction pH (5.5 and 7.5), and PAA molecular weight (2100 and 5100 g/mol) on the particle size, colloidal stability, and photoluminescence were investigated. A Cd/S ratio of <1 causes ineffective passivization of the surface with the carboxylate and therefore results in a red shift of the absorption band and a significant drop in photoluminescence. Therefore, the Cd/S ratio was fixed at 1.1 for all experiments studying the mentioned variables. PAA coating provided excellent colloidal stability at a COOH/Cd ratio above 1. Absorption edges of PAA-coated CdS NPs are in the range of 460-508 nm. The size of the NPs increases slightly with increasing PAA molecular weight and COOH/Cd ratio at pH 7.5. It is demonstrated that there is a critical COOH/Cd ratio (1.5-2) that maximizes the photoluminescence intensity and quantum yield (QY, 17%). Above this critical ratio, which corresponds to smaller crystal sizes (3.7-4.1 nm) for each reaction set, the quantum yield decreases and the crystal size increases. Moreover, CdS NPs prepared at pH 7.5 have significantly higher QY and absorb at lower wavelengths in comparison with those prepared at pH 5.5. Luminescence quenching has not been observed over 8 months.     

Multilayers and poly(allylamine hydrochloride)-graft-poly(ethylene glycol) modified bovine serum albumin nanoparticles: Improved stability and pH-responsive drug delivery

To improve the colloidal stability of bovine serum albumin(BSA) nanoparticles(NPs) in diverse mediums, poly(allylamine hydrochloride)(PAH)/sodium poly(4-styrene sulfonate)(PSS) multilayers and poly(allylamine hydrochloride)-graft-poly(ethylene glycol)(PAH-g-PEG) coating were coated on the surface of BSA NPs.Stabilities of the BSA NPs in diverse mediums with different surfaces were detected by dynamic light scattering(DLS).Multilayers and PAH-g-PEG coated BSA NPs can be well dispersed in various mediums with a narrow polydispersity index(PDI).The BSA NPs with the highest surface density of PEG show the best stability.The multilayers and PAH-g-PEG coating do not deter the pH-dependent loading and release property of BSA NPs.At pH 9,the encapsulation efficiency of doxorubicin reaches almost 99%,and the release rate at pH 5.5 is significantly higher than that at pH 7.4.     

Stability of dispersions of colloidal alumina particles in aqueous suspensions

The colloidal stability of suspensions of alumina particles has been investigated by measuring particle size distribution, sedimentation, viscosity, and zeta potential. Alumina particles were found to be optimally dispersed at pH around 3 to 7.8 without dispersant and at pH 8.5 and beyond with dispersant. The above results corroborate zeta potential and viscosity measurement data well. The surface charge of alumina powder changed significantly with anionic polyelectrolyte (ammonium polycarboxylate, APC) and the iep shifted toward more acidic range under different dispersant conditions. It was found that the essential role played by pH and dispersant (APC) on the charge generation and shift in the isoelectric point of alumina manifests two features: (i) the stability decreases on approaching the isoelectric point from either side of pH, and (ii) the maximum instability was found at pH 9.1 for alumina only and at pH 6.8 for alumina/APC, which is close to the isoelectric points for both the system, respectively. Using the model based on the electrical double-layer theory of surfactant adsorption through shift in isoelectric points, the authors could estimate the specific free energy of interaction (7.501 kcal/mol) between particles and dispersant. The interaction energy, zeta potential, sedimentation, and viscosity results, were used to explain the colloidal stability of the suspension.     

Stabilization of polymer colloid dispersions with pH-sensitive poly-acrylic acid brushes

Polyelectrolyte brushes are widely used for surface modification of nano-and colloidal particles because of their ability to dramatically change their conformation, hydrophobicity, polarity, charge, etc., as a response to smooth variations in environmental conditions. In this work, we have studied experimentally the stability behavior of polymer colloids with grafted poly-acrylic acid (PAA) surface brushes. We have measured the Fuchs stability ratio (W) as a function of electrolyte concentrations at different pH. It is observed that at pH?<?3, the W values with 1 % and 2 % PAA brushes do not differ significantly from those without PAA, indicating that in their protonated state, the carboxylic groups do not contribute significantly to the colloidal stability. At the intermediate pH?~?5, the PAA brushes are partially deprotonated, and their contribution to the colloidal stability is substantial and increases as the length of the PAA brushes increases. Under alkaline conditions (pH?>?8), since most of the carboxylic groups are ionized, the colloidal stability is much higher than that at pH?~?5. However, the W values are basically the same with 1 % and 2 % PAA, implying that the contribution of the ionized AA in the two cases is practically the same. This experimental evidence indicates that only the ionized AA groups in the outer region of long brushes contribute to colloidal stability, thus supporting the hypothesis of local electroneutrality in the inner region of long brushes (LEA).     

Nanoparticle modification by weak polyelectrolytes for pH-sensitive pickering emulsions

The affinity of weak polyelectrolyte coated oxide particles to the oil-water interface can be controlled by the degree of dissociation and the thickness of the weak polyelectrolyte layer. Thereby the oil in water (o/w) emulsification ability of the particles can be enabled. We selected the weak polyacid poly(methacrylic acid sodium salt) and the weak polybase poly(allylamine hydrochloride) for the surface modification of oppositely charged alumina and silica colloids, respectively. The isoelectric point and the pH range of colloidal stability of both particle-polyelectrolyte composites depend on the thickness of the weak polyelectrolyte layer. The pH-dependent wettability of a weak polyelectrolyte-coated oxide surface is characterized by contact angle measurements. The o/w emulsification properties of both particles for the nonpolar oil dodecane and the more polar oil diethylphthalate are investigated by measurements of the droplet size distributions. Highly stable emulsions can be obtained when the degree of dissociation of the weak polyelectrolyte is below 80%. Here the average droplet size depends on the degree of dissociation, and a minimum can be found when 15 to 45% of the monomer units are dissociated. The thickness of the adsorbed polyelectrolyte layer strongly influences the droplet size of dodecane/water emulsion droplets but has a less pronounced impact on the diethylphthalate/water droplets. We explain the dependency of the droplet size on the emulsion pH value and the polyelectrolyte coating thickness with arguments based on the particle-wetting properties, the particle aggregation state, and the oil phase polarity. Cryo-SEM visualization shows that the regularity of the densely packed particles on the oil-water interface correlates with the degree of dissociation of the corresponding polyelectrolyte.     

Preparation of agglomeration-free hematite particles coated with silica and their reduction behavior in hydrogen

To prepare silica-coated hematite particles without agglomeration, the effects of solid fraction, ion content in solution, and designed layer thickness on agglomeration and dispersion behavior after silica coating were examined. Since the ion concentration remained high in suspension after the hematite particles were prepared, these particles formed aggregates by the compression of an electric double layer on the hematite and silica layer produced a solid bridge between primary hematite particles. Silica bridge formation and agglomeration were almost completely prevented by decreasing the ion concentration and solid fraction of the hematite particles. Furthermore, the effects of the silica-layer thickness and structure on the reduction of hematite to iron under hydrogen gas flow and the iron core stability under air were discussed. When the solid fraction was low in suspension to prevent agglomeration during coating, a densely packed structure of nanoparticles formed by heterogeneous nucleation was observed on the silica-layer surface. Since this structure could not completely prevent oxide diffusion, the layer thickness was increased to 40 nm to obtain a stable iron core under air. Although a dense uniform layer was produced at a high solid fraction during coating, its thickness was reduced to 20 nm to completely reduce hematite to iron.     

Nonpolymeric Coatings of Iron Oxide Colloids for Biological Use as Magnetic Resonance Imaging Contrast Agents

Iron oxide nanoparticles are used in vivo as contrast agents in magnetic resonance imaging. Their widely used polymer coatings are directly involved in their biocompatibility and avoid magnetic aggregation. As these polymer brushes also limit their tissular diffusion due to important hydrodynamic sizes, this work looks to obtain particles coated with thin layers of organic biocompatible molecules. Coating molecules were chosen depending on their fixation site on iron cores; carboxylates, sulfonates, phosphates, and phosphonates, and, among them, analogs of the phosphorylcholine. Two coating procedures (dialysis and exchange resins purification) were evaluated for hydrodynamic size, total iron concentration, electrophoretic mobility, and colloidal stability. Furthermore, a complementary test on stainless steel plates evaluated the contamination by competition of phosphonates as a rough estimation of the biocompatibility of the particles. Coating with bisphosphonates, the more interesting fixation moiety, leads to small (less than 15 nm) and stable objects in a wide range of pH including the neutrality. From stability data, the coating density was evaluated at around 1.6 molecules per nm(2). Including a quaternary ammonium salt to the coating molecule lowers their electrophoretic mobility. Moreover, this type of coating protects steel plates against contamination without significant desorption. All these properties allow further developments of these nanoparticles for biomedical applications. Copyright 2001 Academic Press.     

pH-responsive aqueous foams stabilized by ionizable latex particles

We have designed a type of colloidal particle whose surface characteristics are sensitive to the pH of the aqueous phase in which they are dispersed. Particles of polystyrene latex stabilized by poly(acrylic acid) can act as stabilizers of aqueous foams by adsorbing at the air-water surface. Foams can be prepared and stabilized only at pH values below the isoelectric point where particles are either uncharged and flocculated or acquire a positive charge. At high pH where particles are anionic, no foam forms. This influence of pH on foamability and stability applies to both pH-dependent and pH-responsive systems.     

Light Scattering Study of the Antibody–Poly(methacrylic acid) and Antibody–Poly(acrylic acid) Conjugates in Aqueous Solutions

The effect of the conformational state of the polymer coil on the properties of protein–polymer conjugates has been studied for the conjugates of antibody (monoclonal antibody from 6C5 clone against inactivated rabbit muscle glyceraldehyde‐3‐phosphate dehydrogenase; Ab) with poly(methacrylic acid) (PMAA) or poly‐(acrylic acid) (PAA). The pH‐dependencies of molecular properties and structural parameters of aqueous solutions (radius of gyration, intensity of scattered light, hydrodynamic diameter, and polydispersity index) of Ab, PMAA, and PAA and their conjugates, i. e., Ab‐PMAA and Ab‐PAA, have been studied using static and dynamic light scattering techniques. While free Ab aggregates in solution and precipitates at its isoelectric point, the covalent attachment of a charged polymer to Ab prevents its association and shifts the precipitation point towards more acidic values (from pH 5.95 for Ab to pH ˜ 4.8 for Ab‐PMAA). The predominant role of the conformational status of the polymer in the process of conjugate precipitation has been considered. Contrary to the precipitation of Ab‐PMAA, the formation of stable colloidal particles was suggested for Ab‐PAA at pH < 4.8. In the conjugates, polymer chains surround the protein globule in an extremely compact manner while Ab significantly affects the polymer conformation. The essentially larger hydrodynamic radii of conjugates, when compared with their radii of gyration, confirm the strong interaction of conjugates with solvent molecules.     

Colloidal behavior of aluminum oxide nanoparticles as affected by pH and natural organic matter

The colloidal behavior of aluminum oxide nanoparticles (NPs) was investigated as a function of pH and in the presence of two structurally different humic acids (HAs), Aldrich HA (AHA) and the seventh HA fraction extracted from Amherst peat soil (HA7). Dynamic light scattering (DLS) and atomic force microscopy (AFM) were employed to determine the colloidal behavior of the NPs. Influence of pH and HAs on the surface charges of the NPs was determined. zeta-Potential data clearly showed that the surface charge of the NPs decreased with increasing pH and reached the point of zero charge (ZPC) at pH 7.9. Surface charge of the NPs also decreased with the addition of HAs. The NPs tend to aggregate as the pH of the suspension approaches ZPC, where van der Waals attraction forces dominate over electrostatic repulsion. However, the NP colloidal suspension was stable in the pHs far from ZPC. Colloidal stability was strongly enhanced in the presence of HAs at the pH of ZPC or above it, but in acidic conditions NPs showed strong aggregation in the presence of HAs. AFM imaging revealed the presence of long-chain fractions in HA7, which entangled with the NPs to form large aggregates. The association of HA with the NP surface can be assumed to follow a two-step process, possibly the polar fractions of the HA7 sorbed on the NP surface followed by entanglement with the long-chain fractions. Thus, our study demonstrated that the hydrophobic nature of the HA molecules strongly influenced the aggregation of colloidal NPs, possibly through their conformational behavior in a particular solution condition. Therefore, various organic matter samples will result in different colloidal behavior of NPs, subsequently their environmental fate and transport.     

Synthesis and aqueous solution properties of sterically stabilized pH-responsive polyampholyte microgels

Emulsion copolymerization of poly(methacrylic acid) and poly(2-(diethylamino)ethyl methacrylate) (PMAA/PDEA) yielded pH-responsive polyampholyte microgels of 200-300 nm in diameter. These microgels showed enhanced hydrophilic behavior in aqueous medium at low and high pH, but formed large aggregates of approximately 2500 nm at intermediate pH. To achieve colloidal stability at intermediate pH, a second batch of microgels of identical monomer composition were synthesized, where monomethoxy-capped poly(ethylene glycol)methacrylate (PEGMA) was grafted onto the surface of these particles. Dynamic light-scattering measurements showed that the hydrodynamic radius, Rh, of sterically stabilized microgels was approximately 100 nm at intermediate pH and increased to 120 and 200 nm at pH 2 and 10, respectively. Between pH 4 and 6, these microgels possessed mobility close to zero and a negative second virial coefficient, A2, due to overall charge neutralization near the isoelectric pH. From the Rh, mobility, and A2, cross-linked MAA-DEA microgels with and without PEGMA retained their polyampholytic properties in solution. By varying the composition of MAA and DEA in the microgel, it is possible to vary the isoelectric point of the colloidal particles. These new microgels are being explored for use in the delivery of DNA and proteins.     

电泳法研究改性硅灰石的表面性质

本工作用测定水合金属氧化物等电点的方法,作为评定在硅灰石表面镁的包膜技术,为硅灰石的一物多用提供了新的途径;亦为在硅灰石表面包覆其他金属氧化物找到了一种新的方法。 本工作还研究了影响镁包覆的几种因素,结果表明,在硅灰石表面镁包膜的最佳条件为:pH=10,氢氧化镁溶胶的浓度为0.1mol·1~(-1),平衡时间为1小时,液固质量比为10以上。     

Synthesis of highly monodisperse particles composed of a magnetic core and fluorescent shell

Highly monodisperse particles composed of a magnetic silica core and fluorescent polymer shell were synthesized with a combined technique of heterocoagulation and soap-free emulsion polymerization. Prior to heterocoagulation, monodisperse, submicrometer-sized silica particles were prepared with the Stober method, and magnetic nanoparticles were prepared with a modified Massart method in which a cationic silane coupling agent of N-trimethoxysilylpropyl- N, N, N-trimethylammonium chloride was added just after coprecipitation of Fe (2+) and Fe (3+). The silica particles with negative surface potential were heterocoagulated with the magnetic nanoparticles with positive surface potential. The magnetic silica particles obtained with the heterocoagulation were treated with sodium silicate to modify their surfaces with silica. In the formation of a fluorescent polymer shell onto the silica-coated magnetic silica cores, an amphoteric initiator of 2,2'-azobis[ N-(2-carboxyethyl)-2-2-methylpropionamidine] (VA-057) was used to control the colloidal stability of the magnetic cores during the polymer coating. The polymerization of St in the presence of a hydrophobic fluorophore of pyrene could coat the cores with fluorescent polymer shells, resulting in monodisperse particles with a magnetic silica core and fluorescent polymer shell. Measurements of zeta potential for the composite particles in different pH values indicated that the composite particles had an amphoteric property originating from VA-057 initiator.     

The effect of humic acid adsorption on pH-dependent surface charging and aggregation of magnetite nanoparticles

The pH-dependent adsorption of humic acid (HA) on magnetite and its effect on the surface charging and the aggregation of oxide particles were investigated. HA was extracted from brown coal. Synthetic magnetite was prepared by alkaline hydrolysis of iron(II) and iron(III) salts. The pH-dependent particle charge and aggregation, and coagulation kinetics at pH approximately 4 were measured by laser Doppler electrophoresis and dynamic light scattering. The charge of pure magnetite reverses from positive to negative at pH approximately 8, which may consider as isoelectric point (IEP). Near this pH, large aggregates form, while stable sols exist further from it. In the presence of increasing HA loading, the IEP shifts to lower pH, then at higher loading, magnetite becomes negatively charged even at low pHs, which indicate the neutralization and gradual recharging positive charges on surface. In acidic region, the trace HA amounts are adsorbed on magnetite surface as oppositely charged patches, systems become highly unstable due to heterocoagulation. Above the adsorption saturation, however, the nanoparticles are stabilized in a way of combined steric and electrostatic effects. The HA coated magnetite particles form stable colloidal dispersion, particle aggregation does not occur in a wide range of pH and salt tolerance is enhanced.     

Physicochemical characterization of chitosan nanoparticles: electrokinetic and stability behavior

Some physical properties of nanogel particles formed by chitosan ionically cross-linked by tripolyphosphate (TPP) have been studied. Electrokinetic properties and colloidal stability were analyzed as a function of pH and ionic strength of the medium. Chitosan particles showed volume phase transitions (swelling/shrinking processes) when the physicochemical conditions of the medium were changed. Experimental data were mainly obtained by electrophoretic mobility measurements and by photon correlation spectroscopy and static light scattering techniques. Chitosan chains possess glucosamine groups that can be deprotonated if the pH increases. Therefore, modification of pH from acid to basic values caused a deswelling process based on a reduction of the intramolecular electric repulsions inside the particle mesh. Electrophoretic mobility data helped to corroborate the above electrical mechanism as responsible for the size changes. Additionally, at those pH values around the isoelectric point of the chitosan-TPP particles, the system became colloidally unstable. Ionic strength variations also induced important structural changes. In this case, the presence of KCl at low and moderate concentrations provoked swelling, which rapidly turned on particle disintegration due to the weakness of chitosan-TPP ionic interactions. These last results were in good agreement with the predictions of gel swelling theory by salt in partially ionized networks.     

Bioinert solution-cross-linked hydrogen-bonded multilayers on colloidal particles

Bioinert polyelectrolyte multilayers comprised of poly(acrylic acid) and polyacrylamide were deposited on colloidal particles (1.7 microm in diameter) at low pH conditions by layer-by-layer assembly using hydrogen-bonding interactions. The multilayer films were coated uniformly on the colloidal particles without causing any flocculation of the colloids, and the deposited films were subsequently cross-linked by a single treatment of a carbodiimide aqueous solution. The lightly cross-linked multilayer films show excellent stability at physiological conditions (pH 7.4, phosphate-buffered saline), whereas untreated multilayer films dissolved. The multilayer-coated surfaces, both on flat substrates and on colloidal particles, exhibit excellent resistance toward mammalian cell adhesion. With this new solution-based cross-linking method, bioinert H-bonded multilayer coatings offer potential for biomedical applications.     

Coagulation kinetics of amorphous colloidal silica suspensions with and without hydroxypropyl cellulose polymer

The coagulation rate constant of submicron silica has been measured as a function of solution pH, salt concentration and hydroxypropyl cellulose (HPC) polymer concentration. Results show that the colloidal stability of silica is dominated by the cation concentration in the presence of salt in the pH range 3–9.5. The stability increases as cation concentration decreases. At low salt concentration and a minimum colloid stability was found in the intermediate pH range 4–8. These results show that differences in the literature values of the critical coagulation constant by relative light-scattering experiments can be explained by the use of the coagulation rate constant analysis. When HPC polymer was present in the solution, the colloid stability of the silica increased. The adsorption of polymer stabilizes the silica suspensions, both at low pH near the isoelectric point and at high ionic strength where it coagulates without the polymer. A monolayer coverage was necessary to provide steric stabilization. At 10^–3 M KCl a smaller equilibrium concentration of HPC in solution is needed to give monolayer coverage and steric stabilization than at 1 M KCl and pH 4.2.