Optoelectronic characterisation of an individual ZnO nanowire in contact with a micro-grid template

Optoelectronic characterisation of an individual ZnO nanowire in contact with a micro-grid template has been studied.The low-cost micro-grid template made by photolithography is used to fabricate the ohmic contact metal electrodes.The current increases linearly with the bias,indicating good ohmic contacts between the nanowire and the electrodes.The resistivity of the ZnO nanowire is calculated to be 3.8 ·cm.We investigate the photoresponses of an individual ZnO nanowire under different light illumination using light emitting diodes(λ = 505 nm,460 nm,375 nm) as excitation sources in atmosphere.When individual ZnO nanowire is exposured to different light irradiation,we find that it is extremely sensitive to UV illumination;the conductance is much larger upon UV illumination than that in the dark at room temperature.This phenomenon may be related to the surface oxygen molecule adsorbtion,which indicates their potential application to the optoelectronic switching device.     

单根砷掺杂氧化锌纳米线场效应晶体管的电学及光学特性

采用化学气相沉积（CVD）的方法在砷化镓基底上合成直径为20 nm左右、长约数十微米的氧化锌纳米线,然后采用热扩散的方法,将生长于砷化镓基底之上的氧化锌纳米线通过600 ℃,30 min的有氧退火处理后,获得了砷掺杂的氧化锌纳米线.将获得的掺杂后的氧化锌纳米线采用电子束曝光以及真空溅射镀膜的方法将钛/金合金作为接触电极引出,从而构建成场效应晶体管.文中研究了单根氧化锌纳米线砷掺杂前后的电学特性,证实了通过砷掺杂来获得p型的氧化锌纳米线的可行性.构建的p型砷掺杂氧化锌场效应晶体管的跨导为35 nA/V,载流 关键词： p型ZnO纳米线 砷掺杂 场效应晶体管 光致发光     

Growth and characterization of type-II ZnO/ZnTe core-shell nanowire arrays for solar cell applications

Large area, well-aligned type-II ZnO/ZnTe core-shell nanowire arrays have been fabricated on an a-plane sapphire substrate. The ZnO nanowires were grown in a furnace by chemical vapor deposition with gold as catalyst and then were coated with a ZnTe shell on the ZnO nanowires surface by a metal-organic chemical deposition chamber. The morphology and size distribution of the ZnO/ZnTe core-shell nanowire arrays were studied by scanning electron microscopy (SEM) and the crystal structure was examined by x-ray diffraction (XRD). Transmission measurement was used to study the optical properties of the core-shell nanowires. The results indicated that the ZnO/ZnTe core-shell nanowire arrays have good crystalline quality. In addition, it was found that the nanowire arrays have good light absorption characteristics and these properties make it suitable for making photovoltaic devices.     

Defect-Related Photoresponse and Polarization-Sensitive Photodetection of Single ZnO Nanowires

Defect-related photoconductivity of single ZnO nanowires is investigated. The photoconductivity shows powerlaw dependence with incident green laser intensity due to the defect mechanisms including both recombination centres and traps. The device based on single ZnO nanowire shows a sensitive photoresponse to green light with significant on/off ratios. In addition, the photocurrent ＆ highly sensitive to the polarization of the incident illumination. Therefore, the nanowire may act as a polarized photodetector.     

Emerging of Ag particles on ZnO nanowire arrays for blue-ray hologram storage

Noble-metal/metal-oxide-semiconductor nanostructures as an important material platform have been applied in massive data storage. ZnO exhibits excellent optical modulation ability. However, plasmon induced charge separation effect in Ag/ZnO systems is very weak due to the low chemical activity on surface of the oxide. Herein, we prepare ZnO nanowire arrays via the hydrothermal method, and measure their absorption spectra, photoluminescence spectra and electron paramagnetic resonance, proving the existence of oxygen defects in ZnO. Accordingly, an idea of "electron reverse transfer" is proposed such that blue-ray (403.4 nm) induces reduction of Ag⁺ ions through the excitation of ZnO. Rod-like and spherical silver nanoparticles emerge on the surface and in the gap of ZnO nanowire arrays, respectively, after the visible light stimulus. It is found that nanowire density, oxygen defects and surface roughness are dependent on hydrothermal time. The optimized diffraction efficiency of 0.08% is obtained for reconstructing hologram in the nanocomposite film. This work provides a bright way for construction of ZnO-based optoelectronic integrated devices.     

ANSYS仿真激光切割氧化锌纳米线

 以脉冲高斯激光为光源,直径在500 nm～1 000 nm、长度10 μm的一维氧化锌材料为对象,采用有限元分析软件ANSYS建立了激光切割氧化锌纳米线的热力学仿真模型,并采用生死单元技术对超过熔点的单元进行处理,得到不同激光工作参数和氧化锌纳米线直径下的温度分布场和切割形貌。讨论了纳米线直径和聚焦光斑相对纳米线的位移对切割的影响,纳米线直径越大允许的激光离焦量越小;当无离焦或负离焦较小时,切割纳米线产生的形貌较为理想。     

Investigation of the fill factor of dye-sensitized solar cell based on ZnO nanowire arrays

The fill factor of dye-sensitized solar cells based on the ZnO nanowire array is very low, which is usually ascribed to a rapid charge recombination. In this article, the influence on the fill factor of ZnO nanowire array cell is investigated and discussed by comparing dark current and decay rate of open circuit potential of the ZnO nanowire array cell with those of the ZnO nanoparticle cell, TiO₂ nanoparticle cell and TiO₂-coated ZnO nanowire array cell. The results demonstrate that the low fill factor of the ZnO nanowire array cell is largely caused by a rapid decrease of electron injection efficiency rather than a rapid charge recombination, which is decided by the absorption nature of Ru-complexed dye molecules on ZnO surface and repellency of radial electric field. The fill factor of the ZnO nanowire array cell can be improved by coating ZnO nanowires with a wide band gap semiconductor material or metal oxide insulator.     

一维纳米氧化锌自驱动紫外探测器的构建与性能研究

本文通过化学气相沉积法制备了ZnO纳米材料, 利用扫描电镜、光致发光谱、X衍射光谱及拉曼光谱等方法对制备的材料进行了表征. 基于制备的单根ZnO线分别构建了三种不同结构的紫外探测器件: Ag-ZnO-Ag肖特基型、PEDOT:PSS/n-ZnO结型和p-Si/n-ZnO结型紫外探测器, 并对器件的性能进行了研究. 结果表明: 三种不同结构的器件都表现出良好的整流特性, 对紫外线均有明显的光响应; 在零偏压下, 都有明显的自驱动特性. 三种器件中, p-Si/n-ZnO型紫外探测器性能最为优异: 在零偏压下, 暗电流约在1.2×10^-3 nA, 光电流在5.4 nA左右, 光暗电流比为4.5×10³, 上升和下降时间分别为0.7 s和1 s. 通过三类器件性能比较, 表明无机p-Si更适合与ZnO构建pn结型自驱动紫外探测器.     

Growth of vertically aligned one-dimensional ZnO nanowire arrays on sol–gel derived ZnO thin films

Vertically aligned one-dimensional ZnO nanowire arrays have been synthesized by a hydrothermal method on sol–gel derived ZnO films. Sol–gel derived ZnO films and corresponding ZnO nanowire arrays have been characterized by X-ray diffraction and field-emission scanning electron microscopy. The effect of sol–gel derived ZnO film surface on the morphology of ZnO nanowire arrays has been investigated. The authors suggest from our investigation that sol–gel derived ZnO films affect the growth of one-dimensional ZnO nanostructures. Not only crystalline ZnO films but also amorphous ones can act as a scaffold for ZnO nucleus. Tilted ZnO micro-rods are grown on ZnO gel films, whereas vertically aligned ZnO nanowire arrays are grown on nanometer-sized ZnO grains. The average diameter of ZnO nanowire arrays are correlated strongly with the grain size of sol–gel derived ZnO films.     

UV-blocking ZnO nanostructure anti-reflective coatings

In this paper, we apply finite difference time domain simulation to determine the absorptance and reflectance of ZnO nanowire and nanohole array structures for an efficient UV-blocking anti-reflective coating. Comparing to ZnO thin films, both nanowires and nanoholes have much improved performance. ZnO nanowires and nanoholes have similar absorptions in the UV range. However, ZnO nanowires have lower absorptance than nanoholes in the visible range. Influences of different parameters including lattice constant a, ZnO filling ratio f and nanowire heights h are analyzed. The optical properties of the nanostructures are less dependent on the incident angle of light, which enables them to be used as wide angle anti-reflective coatings with UV blocking.     

Integration of ZnO nanowires in gated field emitter arrays for large-area vacuum microelectronics applications

Addressable field emitter arrays (FEAs) have important applications in vacuum electronic devices. However, it is important to integrate nanowire emitters into a gated structure without influencing the device structure and maintain the excellent field emission properties of nanowire emitters in the FEAs after the fabrication process. In this study, gate-structure ZnO nanowire FEAs were fabricated by a microfabrication process. The structure combines a planar gate and an under-gate, which is compatible with the preparation of ZnO nanowire emitters. The effect of electrode materials on the field emission properties of ZnO nanowires was studied using a diode structure, and it was found that ZnO nanowire pads on indium-tin-oxide (ITO) electrode showed better field emission performance compared with chromium (Cr) electrode. In addition, effective emission current modulation by the gate voltage was achieved and the addressing capability was demonstrated by integrating the ZnO nanowire FEAs in a vacuum-encapsulated field emission display. The reported technique could be a promising route to achieve large area addressable FEAs.     

有机-ZnO纳米线混合光电二极管特性

采用水热法制备了1维ZnO纳米线,并通过改变ZnO纳米线的取向（横向和竖直）和不同的P型半导体材料,制备了不同的有机-ZnO纳米线混合光电二极管。通过改变光照与非光照的条件下并在光照条件下改变光电二极管与光源的距离,对所制备的光电二极管的相关特性进行研究。结果表明:采用水热技术能够制备高质量的ZnO纳米线;当光电二极管两端通正向电压时,光照时的电流大于非光照时的电流,当通反向电压时,结果则相反;同时,光电流还与光照强度有关,光照强度越大,光电流越大。     

聚苯胺/ZnO纳米线薄膜材料作为发光层的柔性光电器件 及其发光机理

综合氧化锌纳米线(ZnO NWs)的光学活性与聚苯胺(PANI)的空穴传输特性,设计并制备了一种聚合物/ZnO纳米线电致发光材料,并对其发光特性进行了研究。通过高分子络合软模板法,将有序的单晶ZnO NWs均匀生长在覆有铟锡氧化物(ITO)涂层的柔性聚乙烯对苯二甲酸乙二醇酯(PET)衬底上并嵌入PANI薄膜,获得了电致发光薄膜材料和有机/无机异质结实验器件ITO/(ZnO NWs-PANI)。有机/无机异质结器件电致发光可调,在相对低的开启电压下呈现室温蓝紫外发光,并且ZnO NWs表面覆盖PANI增加了蓝紫外发光的强度和稳定性;而无PANI的ZnO NWs阵列具有450 nm处的缺陷发射峰,这可能是电子从扩展态锌间隙Zn_i到价带的跃迁引起的。这些结果表明,基于PANI/ZnO纳米线的复合材料在柔性光电器件方面的应用极具潜力。     

树形结构Si/ZnO纳米线阵列的制备及光学性能

用一种低成本的方法制备出了树形结构Si/ZnO纳米线阵列。首先在室温条件下用金属辅助化学腐蚀法在Si(100)衬底上制备了Si纳米线阵列,Si纳米线的直径尺寸及分布都很均匀,通过改变腐蚀时间,能够得到高度不同的Si纳米线阵列。利用磁控溅射在Si纳米线表面制备一层ZnO薄膜,然后利用水热法在Si纳米线阵列上生长了ZnO纳米线。通过扫描电子显微镜(SEM)、能谱分析仪(EDS)和光致发光(PL)测试对样品进行了表征。通过这种方法制备的Si/ZnO复合结构在太阳能电池、光催化等领域有潜在应用价值。     

n-ZnO/i-MgO/p-GaN异质结发光二极管

用等离子体辅助分子束外延的方法生长了n-ZnO/i-MgO/p-GaN异质结发光二极管。I-V测量表明其具有典型的二极管整流特性。电致发光峰位于382nm,通过与n型ZnO和p型GaN的光致发光谱比较,其发光峰位与线形都与ZnO的自由激子发射一致,表明该电致发光来自于ZnO的自由激子发射。通过Anderson模型比较了n-ZnO/i-MgO/p-GaN和n-ZnO/p-GaN异质结的能带示意图,证明了由于MgO层的插入抑制了ZnO向GaN层中的电子注入,且有利于空穴向ZnO层注入,从而实现了ZnO层中的电注入发光。     

One step synthesis of vertically aligned ZnO nanowire arrays with tunable length

Length control of ZnO nanowire arrays is a valuable concern for both fundamental research and future device application. In this article, vertically aligned ZnO nanowire arrays were synthesized by a seed layer catalyzed vapor phase transport method in a single experiment cycle. The length of these nanowire arrays exhibits a quasi-continuous evolution. It was found that the type and flow rate of carrier gas have a significant influence on the length modulation of ZnO arrays along the tube. A feasible route to tune the length of ZnO nanowire arrays from several micrometers to nearly 100 μm could be achieved by adjusting proper deposition position and carrier gas.     

Synthesis and characterization of highly-ordered ZnO/PbS core/shell heterostructures

The strategy to manipulate nanoscale building blocks into well-organized heterostructures is very important to both material synthesis and nanodevice applications. In this work, highly-ordered ZnO/PbS core/shell nanowire arrays were fabricated by a facile and low temperature chemical route. Large area and well-aligned ZnO nanowire arrays were firstly fabricated on conductive glass substrates, and then the synthesis of ZnO/ZnS and ZnO/PbS core/shell nanowire arrays were realized by a chemical conversion method. The morphology, structure, and composition of the obtained nanostructures were confirmed by field-emission scanning electron microscopy, energy-dispersive X-ray analysis, and X-ray diffraction measurements. The optical properties of the synthesized nanostructures were investigated by micro-Raman and photoluminescence spectroscopy. In the synthesized ZnO/PbS core/shell nanowire arrays, the ZnO cores can provide direct conduction pathways for electron transport and PbS shells possess superior photoelectric performance. Therefore, the obtained ZnO/PbS core/shell nanostructures may have potential application in photovoltaic devices.     

Growth mechanism studies of ZnO nanowire arrays via hydrothermal method

Well-controlled ZnO nanowire arrays have been synthesized using the hydrothermal method, a low temperature and low cost synthesis method. The process consists of two steps: the ZnO buffer layer deposition on the substrate by spin-coating and the growth of the ZnO nanowire array on the seed layer. We demonstrated that the microstructure and the morphology of the ZnO nanowire arrays can be significantly influenced by the main parameters of the hydrothermal method, such as pH value of the aqueous solution, growth time, and solution temperature during the ZnO nanowire growth. Scanning electron microscopy observations showed that the well oriented and homogeneous ZnO nanowire arrays can be obtained with the optimized synthesis parameters. Both x-ray diffraction spectra and high-resolution transmission electron microscopy (HRTEM) observations revealed a preferred orientation of ZnO nanowires toward the c-axis of the hexagonal Wurtzite structure, and HRTEM images also showed an excellent monocrystallinity of the as-grown ZnO nanowires. For a deposition temperature of 90 °C, two growth stages have been identified during the growth process with the rates of 10 and 3 nm/min, respectively, at the beginning and the end of the nanowire growth. The ZnO nanowires obtained with the optimized growth parameters owning a high aspect ratio about 20. We noticed that the starting temperature of seed layer can seriously influence the nanowire growth morphology; two possible growth mechanisms have been proposed for the seed layer dipped in the solution at room temperature and at a high temperature, respectively.     

Effect of seed layer on the growth of well-aligned ZnO nanowires

We demonstrate that vertical well-aligned crystalline ZnO nanowire arrays were grown on ZnO/glass substrates by a low-temperature solution method. Different thicknesses of ZnO seed layers on glass substrates were prepared by radio-frequency sputtering. In this work it was found that the morphology of ZnO nanowires strongly depends on the thickness of ZnO seed layers. The average diameter of nanowires is increased from 50 to 130 nm and the nanowire density is decreased from 110 to 60 μm⁻² while the seed layer thickness is varied from 20 to 1000 nm. The improved control of the morphology of ZnO nanowire arrays may lead to an enhanced carrier collection of hybrid polymer photovoltaic devices based on ZnO.     

Growth of self-assembled ZnO nanowire arrays

This paper reports on ZnO nanowires arrays synthesized using Sn as a catalyst. The Sn particles were produced from the reduction of SnO₂ powders via a vapour-solid growth process. Control of growth conditions led to the formation of ZnO nanowire arrays, radial nanowire ‘flowers’ and uniaxial fuzzy nanowires. ZnO nanowire–nanobelt junctions were also grown by changing the growth direction. As-grown nanowire arrays could be fundamental materials for investigating physical and chemical properties at nano-scale dimensions.