A rapid ultrasound-assisted thiourea extraction method for the determination of inorganic and methyl mercury in biological and environmental samples by CVAAS

A rapid ultrasound-assisted extraction procedure for the determination of total mercury, inorganic and methyl mercury (MM) in various environmental matrices (animal tissues, samples of plant origin and coal fly ash) has been developed. The mercury contents were estimated by cold vapour atomic absorption spectrometry (CVAAS). Inorganic mercury (IM) was determined using SnCl₂ as reducing agent whereas total mercury was determined after oxidation of methyl mercury through UV irradiation. Operational parameters such as extractant composition (HNO₃ and thiourea), sonication time and sonication amplitude found to be different for different matrices and were optimized using IAEA-350 (Fish homogenate), IM and MM loaded moss and NIST-1633b (Coal fly ash) to get quantitative extraction of total mercury. The method was further validated through the analysis of additional certified reference materials (RM): NRCC-DORM2 (Dogfish muscle), NRCC-DOLT1 (Dogfish liver) and IAEA-336 (Lichen). Quantitative recovery of total Hg was achieved using mixtures of 5% HNO₃ and 0.02% thiourea, 10% HNO₃ and 0.02% thiourea, 20% HNO₃ and 0.2% thiourea for fish tissues, plant matrices and coal fly ash samples, respectively. The results obtained were in close agreement with certified values with an overall precision in the range of 5-15%. The proposed ultrasound-assisted extraction procedure significantly reduces the time required for sample treatment for the extraction of Hg species. The extracted mercury species are very stable even after 24 h of sonication. Closed microwave digestion was also used for comparison purposes. The proposed method was applied for the determination of Hg in field samples of lichens, mosses, coal fly ash and coal samples     

Measurement techniques for mercury species in ambient air

This review critically evaluates the measurement methodologies most commonly employed for the analysis of the various forms of mercury (Hg) in air. Emphasis is given to the three most common forms of mercury in air [i.e. gaseous elemental mercury (GEM, Hg⁰), reactive gaseous mercury (RGM), and particle-bound mercury (Hg_p)]. Moreover, we also briefly describe methods dealing with gas-phase analysis of organic mercury species (e.g., mostly methyl mercury), as they are also reported to be present in air on rare occasions. To begin with, we describe the approaches to sampling airborne mercury species and associated sample-treatment strategies. We evaluate both conventional and emerging alternative detection techniques for different mercury forms with respect to their applicability in airborne mercury analysis. We also discuss the artifacts and the biases associated with analysis of different mercury species. Finally, the review summarizes current methodological developments for the determination of mercury in air and highlights future prospects for improvements.     

Mercury in lichens of Nahuel Huapi National Park, Patagonia, Argentina

Mercury and other elements of interest are determined inlichens collected in Nahuel Huapi National Park, Northern Patagonia, Argentina. Pooled samples are analyzed by instrumental neutron activation analysis. Mercury contents in Usnea sp. collected from undisturbed sites range from 0.0558±0.0083 to 1.38±0.18 μg·g⁻¹. Other potential pollutants are identified by the analysis of Usnea sp. samples, namely Sb, As, Br, Zn, and Se. Previous experiments with foliose and fruticose lichens are also discussed. The analysis of mercury contents of foliose lichens sampled from urban and periurban sites of Bariloche city, and from undisturbed regions, demonstrate that the atmosphere of Bariloche city is enriched in mercury compared to the surroundings. The result is confirmed by transplantation experiments from undisturbed zones to urban sites. This revised version was published online in July 2006 with corrections to the Cover Date.     

Black poplar-tree (<Emphasis Type="Italic">Populus nigra</Emphasis> L.) bark as an alternative indicator of urban air pollution by chemical elements

Capabilities of black poplar-tree (Populus nigra L.) bark as a biomonitor of atmospheric air pollution by chemical elements were tested against epiphytic lichens Xanthoria parietina (L.) and Physcia adscendens (Fr.). Concentrations of 40 macro and trace elements were determined using epicadmium and instrumental NAA. The data obtained were processed using non-parametric tests. A good correlation was found between concentrations of majority of elements in bark and lichens. On the accumulation capability bark turned out to be competitive with both lichens examined. The main inorganic components of black poplar-tree bark were revealed. A substrate influence on the concentrations of some elements in epiphytic lichens was established. An optimized procedure of bark pre-irradiation treatment was suggested.     

Lichens as biomonitors at indoor environments of primary schools

A biomonitoring study, using transplanted lichens Flavoparmelia caperata, was conducted to assess the indoor air quality in primary schools in urban (Lisbon) and rural (Ponte de Sor) Portuguese sites. The lichens exposure period occurred between April and June 2010 and two types of environments of the primary schools were studied: classrooms and outdoor/courtyard. Afterwards, the lichen samples were processed and analyzed by instrumental neutron activation analysis (INAA) to assess a total of 20 chemical elements. Accumulated elements in the exposed lichens were assessed and enrichment factors (EF) were determined. Indoor and outdoor biomonitoring results were compared to evaluate how biomonitors (as lichens) react at indoor environments and to assess the type of pollutants that are prevalent in those environments.     

Chemical speciation of mercury in natural waters

Improved sensitivity of the cold-vapour atomic absorption method for mercury can be obtained by equilibrating the reduced sample with a small volume of air at 90°C. An automated system has been developed that has a detection limit of 1 ng Hg l^-1. By changing the reducing conditions three species of mercury can be differentiated and determined, inorganic mercury, arylmercury compounds such as phenylmercury(II) chloride, and alkylmercury compounds such as methylmercury(II) chloride. Speciation of mercury in natural waters is possible.     

Distribution of mercury in lichens across St. Charles, St. James, and St. John Parishes, Louisiana

Concentrations of mercury in the lichens Ramalina stenospora and Parmotrema praesorediosum were determined using a Bacharach Model 50B analyzer system employing the Environmental Protection Agency (EPA) cold vapor atomic absorption method. Samples were collected from the limbs of live oak trees in a three-parish area in south-east Louisiana. The highest concentrations detected were above 0.8 ppm (μg/ml) and fell off rapidly with increasing distance from possible sources of trace metals. The spatial distribution of mercury concentrations correlated with predominant wind patterns for the region.     

Correlation of mercury concentrations in tree core and lichen samples in southeastern Louisiana

To determine if a correlation exists between mercury concentrations in lichens and wood from tree cores, tree core and lichen samples were taken from sites under mercury advisories and analyzed for mercury using a Bacharach 50B Mercury Analyzer System employing the Manual Cold Vapor Atomic Absorption EPA method 7471A. Wood from tree cores was dated using tree ring data. Wood samples from the cores were analyzed for various depths in the tree core (periods of time) to determine if variations occur throughout the cores. Preliminary data indicate that a strong correlation exists between mercury concentrations in tree core and lichen samples. Samples were analyzed for the 6-month period of summer 2003–winter 2004. A correlation coefficient of 0.882 was found between the tree core and lichen data sets. The derived correlations were used to estimate concentrations of mercury in tree rings for sites in lichen samples which were previously analyzed. These predicted values compared favorably to recently determined concentrations of Hg in tree cores. The strong correlation between lichen and tree core Hg concentrations suggests similar uptake mechanism for the two types of biota.     

Characterization of Mercury Contamination Surrounding a Chloralkali Production Facility in Tuzla,Bosnia and Herzegovina

Tuzla is among the most polluted cities of Bosnia and Herzegovina. The main source of pollution in the area is soil heavily contaminated by mercury released from a former chloralkali plant. This paper is focused on the characterization of mercury contaminated soil and air surrounding the chloralkali plant. In soil, the mobility and transformation of mercury were investigated by sequential extraction, while the methylation and reduction potentials were determined by the use of a radioactive tracer. Mercury emission from soil was determined by laboratory and by flux chamber measurements in the field. In addition, mercury concentrations in air were estimated by the analysis of air and the transplanted lichen Hypogymnia physodes. Mercury in soils in the vicinity of the chloralkali plant exceeded the background value by a factor of more than 3000. The fractionation of mercury in surface soil by sequential extraction showed that the mercury in soil was primarily bound to organic matter and a fraction containing elemental mercury and mercury (I) chloride is also significant. The obtained methylation and reduction potentials are low. The mercury flux from soil was estimated by two approaches. Fluxes of up to 8000?ng/m²/day were measured at the most polluted site; evaporation from soil was shown to be the primary source of elevated mercury in air. Air concentration mapping also revealed other sources of mercury; the most likely is the 715 MW coal power plant in the vicinity of former chloralkali facility.     

Mercury removal from aqueous and organo-aqueous solutions by natural Mexican erionite

The sorption of Hg(II) from aqueous and organo aqueous solutions was investigated by Mexican natural erionite. The mercury chemical species (anionic, cationic or neutral) were determined by high voltage electrophoresis, and the mercury chemical species present in the aqueous media were simulated by a program MEDUSA. The mercury sorption process was monitored during 48 hours. The mercury content was determined by neutron activation analysis. Mixtures of benzene/water[Hg(II)], toluene/water[Hg(II)] and ethanol/water[Hg(II)] were chosen as organo-aqueous media. It was found that both the mercury chemical species and the dielectric constant of solvents play an important role in the mercury sorption by erionite.     

Determination of mercury in air by adsorption on Hopcalite and by neutron activation analysis

A new method for the determination of mercury in air has been developed. It combines the adsorption of mercury on Hopcalite (a material approved for this purpose by the National Institute of Health of the United States) and its quantification by neutron activation. The concentrations of mercury in office air in Montreal, Canada, were determined by instrumental semiabsolute neutron activation analysis. They varied from 39 to 48 ng/m³. The results were compared with the concentrations of mercury in office air determined simultaneously at the same place by cold vapour atomic fluorescence spectrophotometry. A close correlation between the results of the 2 methods was obtained. The detection limit of our method is about 14 ng/m³.     

Structural impacts on thallus and algal cell components of two lichen species in response to low-level air pollution in pacific northwest forests.

Lichens have long been regarded as bioindicators of air pollution, and structural studies typically have indicated negative impacts in highly polluted areas. In this research, Parmelia sulcata and Platismatia glauca were collected from one clean and two polluted sites in the Pacific Northwest forests of the United States to investigate the anatomical and ultrastructural responses of relatively resistant lichens to moderate air pollution. Light microscopy of polluted materials revealed only slight increases in the algal cell proportions of the thallus, and a decrease in the fungal cells of the medulla. Using transmission electron microscopy, increased lipid droplets in the cytoplasm and an increase in the cell wall thickness of the photobionts were found in the polluted lichens. These results were compared with physiological data in which the net carbon uptake did not show any significant differences; however, the total chlorophyll content was heightened in the polluted samples. The increased total chlorophyll content and the absence of any changes in the algal cell proportions of the polluted samples suggest that the photobionts possessed a higher chlorophyll content per unit volume of the photobiont at polluted sites. The results also indicate that lichens have altered their storage allocation in different cellular compartments. This may be a result of symbiotic readjustment(s) between the photobiont and the mycobiont. In comparison with the physiological results from these two species, these changes do not represent damaging effects by low-level air pollution.     

The effects of oxygen on the detection of mercury using laser-induced breakdown spectroscopy

A systematic study of the processes associated with mercury atomic emission in a laser-induced plasma and the interactions of mercury with oxygen species is presented. At early plasma decay times, on the order of 5–10 μs, no significant variation in mercury atomic emission was observed with the addition of oxygen-containing species. At intermediate and long decay times (10–100 μs), a significant reduction in the 253.7-nm mercury emission intensity was recorded with the introduction of oxygen-containing species. The decrease in mercury emission was temporally coincident with the recombination of atomic oxygen, as measured by the O(I) emission. The decreased mercury emission was not due to thermal effects, based on plasma temperature measurements, and was independent of the molecular source of oxygen, for similar concentrations of oxygen as air, carbon dioxide, and carbon monoxide. Analysis of additional mercury atomic emission lines revealed that the reduction in mercury emission in the presence of oxygen species is limited primarily to the 253.7-nm transition. In concert, the data lead to the conclusion that the 253.7-nm mercury emission line is selectively quenched by oxygen species, primarily O₂ and NO, that are formed during the plasma recombination process. Implications for laser-induced breakdown spectroscopy-based emissions monitoring of mercury species are discussed.     

The determination of total gaseous mercury in air at background levels

A method is described for the determination of the total gaseous mercury in air at concentrations ranging from ca. 0.1 ng m^-3 to 1μg m^-3. The method is based on the collection of mercury species on gold-coated quartz wool followed by detection with an atomic absorption detector. The collection efficiencies for mercury, dimethylmercury, methyl-mercury(II) chloride, and mercury(II) chloride are nearly quantitative at flow rates up to 10 1 min^-1 and at temperatures up to 50°C. The absolute detection limit of the method is 20 pg of mercury. Under field conditions the precision of the analytical procedure was 14.5% (n=5) for 400-l samples of air and a mercury concentration of 1.5 ng m^-3. Measurements of the mercury distribution in the atmosphere show an ambient background level in clean air masses of 1.0–4.0 ng m^-3.     

Investigation of air pollution in Chile using biomonitors

A project has been undertaken to carry out a long term study on atmospheric air pollution in Chile using biomonitors. Samples of different species of lichens were collected in clean areas (native forest), analyzed and transplanted to the Santiago Metropolitan Area. In addition, samples of Tillandsia recurvata were collected in the Metropolitan Area for comparison purposes. The preparation of the samples was done under controlled, cryogenic conditions and analyzed by neutron activation analysis and solid sampling atomic absorption spectrometry. As part of the routine QA/QC procedures, the analytical laboratories, have participated in intercomparison runs organized by the IAEA for the determination of trace and minor elements in two lichens samples. The present paper describes the activities carried out within the framework of this project. This revised version was published online in July 2006 with corrections to the Cover Date.     

Sampling and determination of gas phase divalent mercury in the air using a KCl coated denuder

KCl coated denuders were employed for the measurement of divalent mercury (Hg²⁺) species in the air. Laboratory tests show that gaseous Hg²⁺ can be collected by the denuder with an average efficiency of 98% and elemental Hg will pass through it freely. Hg²⁺ trapped in the denuder can be quantitatively extracted by 1 mol/L HCl and analyzed by the method of SnCl₂ reduction-CVAFS determination. Hg²⁺ concentrations of 0.04–0.15 ng m^–3 corresponding to about 2–9% of the total gaseous mercury in the ambient air were determined at several sampling locations.     

Application of a wool column for flow injection online preconcentration of inorganic mercury(II) and methyl mercury species prior to atomic fluorescence measurement

The use of an unmodified native sheep wool packed minicolumn for the online preconcentration of Hg(II) and methyl mercury species prior to the determination of mercury by atomic fluorescence spectrometry was investigated. Experimental conditions, such as pH, desorbing agents, volume of solution were optimized. 0.5M thioglycolic acid was found to be a successful eluting agent for both mercury species. Breakthrough and total capacities were determined. The method is simple and rapidly applicable for the determination of Hg(II) and methyl mercury in tap water. The accuracy of the method was examined by the analysis of a peach leaves standard reference material. Recoveries of spiked mercury species in tap water were 105.8% for Hg(II) and 98.8% for methyl mercury.     

Dosage DU Mercure Par Spectroscopy D' Absorption Atomique Sans Flamme

Abstract

A method has been developed whereby low levels of mercury can be determined in biological samples. The sample is burned in an air stream and the mercury vapors are collected in a cold trap and determined by flameless atomic absorption spectroscopy.     

Supercritical fluid extraction of mercury species

Supercritical fluid extraction was used to recover organic and inorganic mercury species. Variations in pressure, water, methanol, and chelator create methods that allowed separation of inorganic from organic mercury species. When extracted using a compromised set of extraction conditions, the order of extraction was methyl, phenyl and inorganic mercury. For the individually optimized conditions, quantitative recoveries were observed. Level as low as 20 ppb were extracted and then determined using ICP.     

Direct measurement of the mercury content of exhaled air: a new approach for determination of the mercury dose received

A new rapid technique is presented for determination of the dose of mercury inhaled; it is based on direct measurement of the concentration of mercury in exhaled air by use of a Zeeman mercury spectrometer RA-915+. It has been demonstrated experimentally that the dose received during short-term exposure to mercury vapor is determined more reliably by this method rather than by conventional techniques based on measurement of the mercury content in blood or urine.