Charge Transfer Photophysics of Tetra(α-amino) Zinc Phthalocyanine

The absorption, fluorescence, and transient absorption spectra of Tetra(α-amino) zinc phthalocyanine, ZnPc(α-NH₂)₄, have been measured in polar solvents and compared with that of ZnPc(α-R)₄ (R?=?H, NO₂, OCH(CH₃)₂). While the latter three showed the typical photophysics of phthalocyanines, ZnPc(α-NH₂)₄ exhibits distinct spectral properties, a very low fluorescence quantum yield and a relatively long fluorescence lifetime. These observations are explained by the substantial charge transfer characters in the absorption and fluorescence spectra of ZnPc(α-NH₂)₄. NMR indicates that intramolecular H-bonding makes atoms in NH₂ actually coplanar with other elements of ZnPc(α-NH₂)₄. The local excited state is non emissive and the weak emission is assigned to its charge transfer state. The transient absorption bands from laser flash photolysis located at 630 nm, 645 nm is assigned to the mono-charge transfer state, while that at 545 nm is assigned to the di-charge transfer state.     

Synthesis and photophysical behavior of a novel zinc phthalocyanine containing a single carboxylic acid and three phenylthio substituents

Zinc 2, (3)-tri-(phenylthio)-2, (3)-carboxy phthalocyanine (ZnPc(COOH)(SPh)₃), zinc 2, (3)-tetra-(phenylthio) phthalocyanine (ZnPc(SPh)₄) and 2, (3)-tetra-(phenylthio) phthalocyanine (H₂Pc(SPh)₄) were synthesized and their photophysical behavior were compared with those of a number of zinc phthalocyanine (ZnPc) derivatives. ZnPc(COOH)(SPh)₃ and ZnPc(SPh)₄ had similar fluorescence (Φ_F=0.14) and triplet state (Φ_T=0.65) quantum yields in dimethylsulfoxide, hence showing no effects of the replacement of one of the phenylthio groups with a carboxylic acid group. ZnPc(COOH)(SPh)₃ displayed a slightly shorter triplet lifetime (τ_T=331 μs) than ZnPc (τ_T=350 μs) in DMSO, but within the range of ZnPc derivatives. The triplet lifetime for ZnPc(COOH)(SPh)₃ is much longer than for the symmetrical derivative (ZnPc(SPh)₄) with τ_T=149 μs in DMSO.     

Photofunctional Polyurethane Nanofabrics Doped by Zinc Tetraphenylporphyrin and Zinc Phthalocyanine Photosensitizers

Polymeric polyurethane nanofabrics doped by zinc tetraphenylporphyrin (ZnTPP) and/or zinc phthalocyanine (ZnPc) photosensitizers were prepared by the electrospinning method and characterized by microscopic methods, steady-state and time-resolved fluorescence, and absorption spectroscopy. Nanofabrics doped by both ZnTPP and ZnPc efficiently harvest visible light to generate triplet states and singlet oxygen O₂(¹Δ_g) with a lifetime of about 15 μs in air atmosphere. The energy transfer between the excited singlet states of ZnTPP and ground states of ZnPc is described in details. All nanofabrics have bactericidal surfaces and photooxidize inorganic and organic substrates. ZnTPP and ZnPc in the polyurethane nanofabrics are less photostable than incorporated free-base tetraphenylporphyrin (TPP).     

Reductive Fluorescence Quenching of the Photoexcited Free Base <Emphasis Type="Italic">meso</Emphasis>-Tetrakis (Pentafluorophenyl) Porphyrin by Amines

Steady state and time resolved fluorescence quenching behaviors of meso-Tetrakis (pentafluorophenyl) porphyrin (H₂F₂₀TPP) in presence of different aliphatic and aromatic amines have been executed in homogeneous dichloromethane (DCM) solution. At room temperature in DCM, free base (H₂F₂₀TPP) shows fluorescence with two distinct peaks at 640 and 711 nm and natural lifetime τ _f = 9.8 ns which are very similar to that of meso-tetraphenyl porphyrin (TPP). Unlike TPP, addition of both aliphatic and aromatic amines to a solution containing H₂F₂₀TPP results in an efficient decrease in fluorescence intensity without altering the shape and peak position of fluorescence emission. Upon addition of amines there was no change in optical absorption spectra of H₂F₂₀TPP. The fluorescence quenching rate constants ranged from 1 × 10⁹ to 4 × 10⁹ s⁻¹, which are one order below to the diffusion control limit, and temperature dependent quenching rate constants yield the activation energies which are found to be order of 0.1 eV. Femto second transient absorption studies reveal the existence of amine cation radical and porphyrin anion radicals with very short decay time (15 ps). The fluorescence quenching reaction follows Stern–Volmer kinetics. Steady state and time-resolved data are interpreted within general kinetic scheme of Marcus semi-classical model which attributes bimolecular electron transfer process between amines and the lowest excited singlet state of H₂F₂₀TPP. Calculated internal reorganization energies are found to be in between 0.04 and 0.22 ev. Variation of electron transfer rate as function of free energy change (∆G⁰) points the ET reactions in the present systems are in Marcus normal region. This is the first example of reductive fluorescence quenching of free base neutral porphyrins in homogeneous organic solvent ever known.     

Determination of Enoxacin Using Tb Composite Nanoparticles Sensitized Luminescence Method

In our study, terbium-acetylacetone (Tb-acac) composite nanoparticles have been prepared under vigorous ultrasonic irradiation. The nanoparticles are water soluble, stable and have extremely narrow emission bands and high internal quantum efficiencies. They were used as fluorescence probes in the determination of enoxacin (Enox) based on the fluorescence enhancement of nanoparticles through fluorescence resonance energy transfer (FRET). The influence of buffer solution on the fluorescence intensity was investigated. Under the optimum conditions, the fluorescence intensity of the Tb-acac-Enox system is linearly proportional to the Enox concentration in the Enox concentration range of 2 × 10⁻⁷–1 × 10⁻⁴ M. The correlation coefficient for the calibration curve was 0.9976. The limit of detection as defined by IUPAC, C _LOD = 3S _b/m (where S _b is the standard deviation of the blank signals and m is the slope of the calibration graph) was found to be 3 × 10⁻⁸ M. The relative standard deviation (RSD) for six repeated measurements of 1 × 10⁻⁴ M Enox was 1.35%. The method was applied to the determination of Enox in pharmaceutical formulation and recovery results were obtained from urine samples.     

Syntheses and Fluorescence Properties of Two Novel Lanthanide (III) Perchlorate Complexes with Bis(benzylsulfinyl)methane

A novel ligand with double sulfinyl groups, bis(benzylsulfinyl)methane, was synthesized by a new method and its two lanthanide (III) complexes were synthesized and characterized by element analysis, molar conductivity, coordination titration analysis, IR, TG-DSC, ¹HNMR and UV spectra. The results indicated that the composition of these complexes was REL_2.5(ClO₄)₃·3H₂O (RE = Tb (III), Dy (III), L = C₆H₅CH₂SOCH₂SOCH₂C₆H₅). The FT-IR results revealed that the perchlorate group was bonded with the lanthanide ion by the oxygen atoms, and the coordination was bidentate. The fluorescent spectra illustrated that both the Tb (III) and Dy (III) complexes displayed characteristic fluorescence in solid state, especially for the Tb (III) complex, the peak of ⁵D₄ → ⁷ F₅ of the Tb (III) ion in 544 nm was stronger than that of others. It indicated that the Tb (III) complex could emit purer green fluorescence. By analysis fluorescence and phosphorescence spectra, it was found that the ligand had the advantage to absorb energy and transfer it to the Tb (III) and Dy (III) ions. The phosphorescence spectra and fluorescence lifetimes of the complexes were also measured.     

Pyrophosphate Selective Recognition in Aqueous Solution Based on Fluorescence Enhancement of a New Aluminium Complex

A novel and simple fluorescence enhancement method for selective pyrophosphate(PPi) sensing was proposed based on a 1:1 metal complex formation between bis(8-hydroxy quinoline-5-solphonat) chloride aluminum(III) (Al(QS)₂Cl), (L) and PPi in aqueous solution. The linear response range covers a concentration range of 1.6 × 10⁻⁷ to 1.0 × 10⁻⁵ mol/L of PPi and the detection limit of 2.3 × 10⁻⁸ mol/L. The association constant of L-PPi complex was calculated 2.6 × 10⁵ L/mol. L was found to show selectively and sensitively fluorescence enhancement toward PPi over than I₃^-, NO₃^-, CN⁻, CO₃²⁻, Br⁻, Cl⁻, F⁻, H₂PO4⁻ and SO₄²⁻, which was attributed to higher stability of inorganic complex between pyrophosphate and L.     

Effect of Host Medium on the Fluorescence Emission Intensity of Rhodamine B in Liquid and Solid Phase

In this work, we study the effect of concentration, host medium, PH and phase states on the fluorescence emission from the laser dye Rhodamine B pumped by UV laser as exited source. The polymethylmethacrylate PMMA is used as a host medium in case of solid phase samples while, ethanol and Tetrahydrofuran (THF) are used in case of a liquid one. Laser Induced Fluorescence (LIF) technique was used to study the fluorescence properties of both cases of liquid and thin film solid-state samples. In addition, the Dual Thermal Lens (DTL) technique was used to study the quantum yield of these samples. The concentrations of Rhodamine B in ethanol as solvent between 2 × 10⁻² M and 5 × 10⁻⁶ M were studied. The maximum fluorescence emission is observed at concentration of Rhodamine B C = 3 × 10⁻⁴ M. Comparison studies were investigated for different host medium such as ethanol, THF, PMMA in liquid phase state and PMMA in solid phase state. The measurements revealed that, the behavior of both phases state was analogous. Rhodamine B/PMMA thin film sample by ratio of 4:1 and thickness 0.12 mm was found to have the best photostability sample with a quantum yield about ≈0.82.     

Binding of Quercetin to Lysozyme as Probed by Spectroscopic Analysis and Molecular Simulation

The binding of quercetin to lysozyme (LYSO) in aqueous solution was investigated by fluorescence spectroscopy, UV-vis absorption spectroscopy and molecular simulation at pH 7.4. The fluorescence quenching of LYSO by addition of quercetin is due to static quenching, the binding constants, K _a , were 3.63 × 10⁴, 3.31 × 10⁴ and 2.85 × 10⁴ L·mol⁻¹ at 288, 298 and 308 K, respectively. The thermodynamic parameters, enthalpy change, ∆H, and entropy change, ∆S, were noted to be −7.56 kJ·mol⁻¹ and 61.07 J·mol⁻¹·K⁻¹. The results indicated that hydrophobic interaction may play a major role in the binding process. The distance r between the donor (LYSO) and acceptor (quercetin) was determined as 3.34 nm by the fluorescence resonance energy transfer. The synchronous fluorescence spectroscopy showed the polarity around the tryptophan residues increased and the hydrophobicity decreased. Furthermore, the study of molecular simulation indicated that quercetin could bind to the active site (a pocket made up of 24 amino-acid residues) of LYSO mainly via hydrophobic interactions and that there were hydrogen interactions between the residues (Gln 57, Ile 98) of LYSO and quercetin. The accessible surface area (ASA) calculation verified the important roles of tryptophan (Trp) residues during the binding process.     

Ni-MH battery based on plasticized alkaline solid polymer electrolytes

Solid-state nickel metal hydride cells were fabricated using plasticized alkaline solid polymer electrolytes (ASPE) prepared from polyvinyl alcohol (PVA), potassium hydroxide (KOH), alumina (α-Al₂O₃), and propylene carbonate (PC). The ASPE film with PVA/KOH/α-Al₂O₃/PC/H₂O weight ratio of 1.00:0.67:0.09:2.64:1.32 and conductivity of (6.6 ± 1.7) × 10⁻⁴ S cm⁻¹ was used in fabrication of the electrochemical cells. To investigate the electrochemical properties of the plasticized ASPE, cells with the configuration Mg₂Ni/plasticized ASPE/Ni(OH)₂ were fabricated. At the eighth cycle with a current drain of 0.1 mA and plateau voltage of ∼1.1 V, the discharge lasted for 14 h before the cell was considered to have failed. The failure mode of the cell was due to the formation of thin Mg(OH)₂ insulating layers.     

Spectrofluorimetric Assessment of Hydrochlorothiazide Using Optical Sensor Nano-Composite Terbium Ion Doped in Sol-Gel Matrix

A new, simple, sensitive and selective spectrofluorimetric method for the determination of Hydrochlorothiazide was developed in acetonitrile at pH 6.2. The Hydrochlorothiazide can remarkably enhance the luminescence intensity of the Tb³⁺ ion doped in sol–gel matrix at λ_ex = 370 nm. The intensity of the emission band of Tb³⁺ ion doped in sol–gel matrix was increased due to the energy transfer from the triplet excited state of Hydrochlorothiazide to (⁵D₄) excited energy state of Tb³ ion. The enhancement of the emission band of Tb³⁺ ion doped in sol–gel matrix at (⁵D₄→⁷ F₅) 545 nm was directly proportion to the concentration of Hydrochlorothiazide with a dynamic ranges of 5.0 × 10⁻¹⁰—5.0 × 10⁻⁶ mol L⁻¹ and detection limit of 2.2 × 10⁻¹¹ mol L⁻¹.     

Nonlinear optical and optical limiting studies of alkoxy phthalocyanines in solutions studied at 532 nm with nanosecond pulse excitation

We report our results on the nonlinear optical and optical limiting properties of two alkoxy phthalocyanines namely 2,3,9,10,16,17,23,24-octakis-(heptyloxy) phthalocyanine and 2,3,9,10,16,17,23,24-octakis-(heptyloxy) phthalocyanine zinc(II) studied at a wavelength of 532 nm using 6 ns pulses. Using the standard Z-scan technique we observed that both the phthalocyanines exhibited negative nonlinearity as revealed by the signature of closed aperture data. The magnitude of the nonlinear refractive index n₂ evaluated from the closed aperture data was ∼ 1.61×10^-11 cm²/W for the free-base phthalocyanine and ∼ 1.56×10^-11 cm²/W for the metallic phthalocyanine. Open aperture Z-scan data indicates strong nonlinear absorption in both the phthalocyanines with measured nonlinear coefficients of ∼ 1650 cm/GW and ∼ 1850 cm/GW respectively. We also report optical limiting properties of these phthalocyanines with limiting thresholds (I_1/2) of ∼ 0.5 J/cm². Our studies suggest that these phthalocyanines are one of the best molecules for nonlinear optical applications studied recently. PACS 42.65.-k; 42.70.Jk, 42.65.Jx     

Fluorescent Method for the Determination of Sulfide Anion with ZnS:Mn Quantum Dots

Water-soluble Mn²⁺-doped ZnS quantum dots (QDs) were prepared using mercaptoacetic acid as the stabilizer. The optical properties and structure features were characterized by X-Ray, absorption spectrum, IR spectrum and fluorescence spectrum. In pH 7.8 Tris-HCl buffer, the QDs emitted strong fluorescence peaked at 590 nm with excitation wavelength at 300 nm. The presence of sulfide anion resulted in the quenching of fluorescence and the intensity decrease was proportional to the S²⁻ concentration. The linear range was from 2.5 × 10⁻⁶ to 3.8 × 10⁻⁵ mol L⁻¹ with detection limit as 1.5 × 10⁻⁷ mol L⁻¹. Most anions such as F⁻, Cl⁻, Br⁻, I⁻, CH₃CO₂ ⁻, ClO₄ ⁻, CO₃ ²⁻, NO₂ ⁻, NO₃ ⁻, S₂O₃ ²⁻, SO₃ ²⁻ and SO₄ ²⁻ did not interfere with the determination. Thus a highly selective assay was proposed and applied to the determination of S²⁻ in discharged water with the recovery of ca. 103%.     

Synthesis and Fluorescence Properties of Lanthanide (III) Perchlorate Complexes with Naphthyl-Naphthalinesulphonylpropyl Sulfoxide

A ligand with double sulfinyl groups, naphthyl-naphthalinesulphonylpropyl sulfoxide(dinaphthyl disulfoxide, L), was synthesized by a new method and its several lanthanide (III) complexes were synthesized and characterized by element analysis, molar conductivity, coordination titration analysis, IR, TG-DTA, ¹HNMR and UV spectra. The composition of these complexes, were RE₂(ClO₄)₆·(L)₅·nH₂O (RE = La, Nd, Eu, Tb, Yb, n = 2 ∼ 6, L = C₁₀H₇SOC₃H₆SOC₁₀H₇). The fluorescent spectra illustrated that the Eu (III) complex had an excellent luminescence. It was supposed that the ligand was benefited for transferring the energy from ligand to the excitation state energy level (⁵D₀) of Eu (III). The Tb (III) complex displayed weak luminescence, which attributed to low energy transferring efficiency between the average triplet state energy level of ligand and the excited state (⁵D₄) of Tb (III). So the Eu (III) complex displayed a good antenna effect for luminescence. The phosphorescence spectra and the relationship between fluorescence lifetime and fluorescence intensity were also discussed.     

PARAFAC Analysis of the Quenching of EEM of Fluorescence of Glutathione Capped CdTe Quantum Dots by Pb(II)

Glutathione capped CdTe quantum dots (QD) were synthesised using a simple experimental procedure and two samples were subjected of study (QD₅₅₀ and QD₆₀₀). The maximum of the excitation and emission spectra and the emission full width of half maximum of these two QD were: QD₅₅₀, 307, 550 and 37 nm; QD₆₀₀, 307, 600 and 39 nm. The steady state fluorescence properties of the two QD undergo variation when the pH of the aqueous solution is varied and are characterised by different apparent pKa: QD₅₅₀, 5.2 ± 0.1; QD₆₀₀, 6.3 ± 0.3. The fluorescence intensity of the QD₅₅₀ is markedly quenched by the presence of micromolar quantities of Pb(II) ion (Stern–Volmer constant of about 7 × 10⁵ M⁻¹). PARAFAC analysis of the excitation emission matrices (EEM) of QD₅₅₀ acquired as function of the Pb(II) ion showed that only one linearly independent component describes the quenching of the QD₅₅₀ by the Pb(II) ion allowing robust estimation of the excitation and emission spectra and of the quenching profiles.     

The Role of the Eu<Superscript>3+</Superscript> Concentration on the SrMoO<Subscript>4</Subscript>:Eu Phosphor Properties: Synthesis,Characterization and Photophysical Studies

SrMoO₄ doped with rare earth are still scarce nowadays and have attracted great attention due to their applications as scintillating materials in electro-optical like solid-state lasers and optical fibers, for instance. In this work Sr_1−xEu_xMoO₄ powders, where x = 0.01; 0.03 and 0.05, were synthesized by Complex Polymerization (CP) Method. The structural and optical properties of the SrMoO₄:Eu³⁺ were analyzed by powder X-ray diffraction patterns, Fourier Transform Infra-Red (FTIR), Raman Spectroscopy, and through Photoluminescent Measurements (PL). Only a crystalline scheelite-type phase was obtained when the powders were heat-treated at 800 °C for 2 h, 2θ = 27.8° (100% peak). The excitation spectra of the SrMoO₄:Eu³⁺ (λ_Em. = 614 nm) presented the characteristic band of the Eu^3 + 5L₆ transition at 394 nm and a broad band at around 288 nm ascribed to the charge-transfer from the O (2p) state to the Mo (4d) one in the SrMoO₄ matrix. The emission spectra of the SrMoO₄:Eu³⁺ powders (λ_Exc. = 394 and 288 nm) show the group of sharp emission bands among 523–554 nm and 578–699 nm, assigned to the ⁵D₁→⁷F_{0,1and 2} and ⁵D₀→⁷F_{0,1,2,3 and 4}, respectively. The band related to the ⁵D₀→⁷F₀ transition indicates the presence of Eu³⁺ site without inversion center. This hypothesis is strengthened by the fact that the band referent to the ⁵D₀→⁷F₂ transition is the most intense in the emission spectra.     

Development of Flow Injection Spectrofluorimetric Detection System for the Determination of Homocysteine

In this work, a new simple and sensitive flow injection method is developed for the determination of homocysteine with spectrofluorimetric detection technique. This method is based on the oxidation of homocysteine with Tl (III) in acidic media, producing fluorescence reagent, TlCl₃^2- (λ_ex = 237 nm, λ_em = 419 nm). The effects of chemical parameters (including pH of the solutions, the buffer, Tl (III) and potassium chloride concentrations), instrumental parameters (such as flow rate of the solutions, reaction coil length, and sample loop volume) and temperature on the fluorescence intensity as an analytical signal are studied and optimized. In the optimum conditions of the above variables, homocysteine can be determined in the range 4.0 × 10^-7–40.0 × 10^-6 M with the LDR from 4.0 × 10^-7 to 25.0 × 10^-6 M. The detection limit (with S/N = 3) is 6.0 × 10^-8 M of homocysteine and precision for the injection of 5.0, 10.0 and 15.0 μM of homocysteine are 0.8%, 1.5% and 2.5% (n = 10) respectively. The rate of analysis is 90 samples per hour. The influence of potential interfering substances, including amino acids and carbohydrates is also studied. The proposed method has been successfully used for the determination of homocysteine in the real sample (blood serum and tap water) matrix.     

A Long Wavelength Excitable Fluorophore; Chloro Phenyl Imino Propenyl Aniline (CPIPA) for Selective Sensing of Hg (II)

In this study, a very sensitive and highly selective irreversible optical chemical sensor (optode) for mercury ions was described. The sensing scheme was based on the interaction of Hg (II) with a newly synthesized fluoroionophore; chloro phenyl imino propenyl aniline (CPIPA) in plasticized PVC membrane. The sensor membranes were tested for the determination of mercury ion in aqueous solutions by batch and flow-through methods. The optodes allow determination of Hg (II) in the working range of 1.0 × 10⁻⁹–1.0 × 10⁻⁵ M with a detection limit of 4.3 ppb. The sensor exhibited excellent selectivity for Hg (II) with respect to several common alkali, alkaline earth and transition metal ions. The association constant of the 1:1 complex formation for Hg (II) was found to be K_a = 1.86 × 10⁵ M⁻¹. The CPIPA exhibited high fluorescence quantum yield, long excitation and emission wavelength and high Stokes’ shift values in the solid matrix which makes it compatible with solid state optics.     

Influence of local excitation of octupolar Oligophenylenevinylenes on their dipole moments

Absorption and fluorescence spectra of octupolar centrosymmetric oligophenylenevinylene dyes (E,E)-bis[2-(4-hexyloxyphenyl)ethenyl]-(E,E)-3,6-bis-[2-(4-N,N-dipropylaminophenyl)ethenyl]pyrazine and (E,E,E,E)-2,3,5,6- tetra-[2-(4-hexyloxyphenyl)ethenyl]pyrazine were measured in various solvents. An electro-optical absorption method was used to determine their dipole moments as μ _g  = 6.1∙10^–30 and 3.4∙10^–30 C∙m in the equilibrium ground state and the increased values ∆ ^a μ = 11.9∙10^–30 and 8.2∙10^–30 C∙m upon excitation into a Franck–Condon state. Quantum-chemical calculations showed that the molecules had non-planar configurations. The π,π-conjugated system was localized on the most planar part of the molecule that was responsible for light absorption in the range 300–450 nm due to a change in the geometry of the molecules in the ground state. Localized excitation of the molecules caused their dipole moments ∆ ^a μ to change significantly.     

Conformational Transitions of the Catalytic Domain of Heme-Regulated Eukaryotic Initiation Factor 2α Kinase, a Key Translational Regulatory Molecule

In mammalian cells, the heme-regulated inhibitor (HRI) plays a critical role in the regulation of protein synthesis at the initiation step through phosphorylation of α-subunit of the eukaryotic initiation factor 2 (eIF2). In this study we have cloned and performed biophysical characterization of the kinase catalytic domain (KD) of rabbit HRI. The KD described here comprises kinase 1, the kinase insertion domain (KI) and kinase 2. We report here the existence of an active and stable monomer of HRI (KD). The HRI (KD) containing three tryptophan residues was examined for its conformational transitions occurring under various denaturing conditions using steady-state and time-resolved tryptophan fluorescence, circular dichroism (CD) and hydrophobic dye binding. The parameter A and phase diagram analysis revealed multi-state unfolding and existence of three stable intermediates during guanidine hydrochloride (Gdn-HCl) induced unfolding of HRI (KD). The protein treated with 6 M Gdn-HCl showed collisional and static mechanism of acrylamide quenching and the constants (K _sv  = 3.08 M⁻¹and K _s   = 5.62 M⁻¹) were resolved using time resolved fluorescence titration. Based on pH, guanidine hydrochloride and temperature mediated transitions, HRI (KD) appears to exemplify a rigid molten globule-like intermediate with compact secondary structure, altered tertiary structure and exposed hydrophobic patches at pH 3.0. The results indicate the inherent structural stability of HRI (KD), a member of the class of stress response proteins.