DNA Dangling‐End‐Induced Colloidal Stabilization of Gold Nanoparticles for Colorimetric Single‐Nucleotide Polymorphism Genotyping

A single‐nucleotide polymorphism (SNP) detection method was developed by combining single‐base primer extension and salt‐induced aggregation of gold nanoparticles densely functionalized with double‐stranded DNA (dsDNA‐AuNP). The dsDNA‐AuNPs undergo rapid aggregation in a medium of high ionic strength, whereas particles having a single‐base protrusion at the outermost surface disperse stably, allowing detection of a single‐base difference in length by color changes. When SNP typing primers are used as analytes to hybridize to the single‐stranded DNA on the AuNP surface, the resulting dsDNA‐AuNP works as a visual indicator of single‐base extension. A set of four extension reaction mixtures is prepared using each of ddNTPs and subsequently subjected to the aggregation assay. Three mixtures involving ddNTP that is not complementary to the SNP site in the target produce the aggregates that exhibit a purple color. In contrast, one mixture with the complementary ddNTP generates the single‐base protrusion and appears red. This method could potentially be used in clinical diagnostics for personalized medicine.     

Tuning the reaction site for enzyme-free primer-extension reactions through small molecule substituents

The replication of genetic information relies on the template-directed extension of DNA primers catalyzed by polymerases. The active sites of polymerases accept four different substrates and ensure fidelity and processivity for each of them. Because of the pivotal role of catalyzed primer extension for life, it is important to better understand this reaction on a molecular level. Here we present results from primer-extension reactions performed with chemical systems that show high reactivity in the absence of polymerases. Small molecular caps linked to the 5'-terminus of templates are shown to enhance the rate and selectivity of primer extension driven by 2-methylimidazolides as activated monomers for any of the four different templating bases (A, C, G, and T). The most consistent effect is provided by a stilbene carboxamide residue, rather than larger aromatic or aliphatic substituents. Up to 20-fold rate enhancements were achieved for the reactions at the terminus of the template. The preference for a medium size cap can be explained by competing interactions with both the oligonucleotides and the incoming deoxynucleotide. The data also show that there is no particularly intractable problem in combining promiscuity with fidelity. Exploratory experiments involving a longer template and a downstream-binding strand with a 5'-cap show up to 38-fold rate acceleration over the same reaction templated by a single overhanging nucleotide.     

A sensitive fluorescence anisotropy method for point mutation detection by using core-shell fluorescent nanoparticles and high-fidelity DNA ligase

The present study reports a proof-of-principle for a sensitive genotyping assay approach that can detect single nucleotide polymorphisms (SNPs) based on fluorescence anisotropy measurements through a core-shell fluorescent nanoparticles assembly and ligase reaction. By incorporating the core-shell fluorescent nanoparticles into fluorescence anisotropy measurements, this assay provided a convenient and sensitive detection assay that enabled straightforward single-base discrimination without the need of complicated operational steps. The assay was implemented via two steps: first, the hybridization reaction that allowed two nanoparticle-tagged probes to hybridize with the target DNA strand and the ligase reaction that generated the ligation between perfectly matched probes while no ligation occurred between mismatched ones were implemented synchronously in the same solution. Then, a thermal treatment at a relatively high temperature discriminated the ligation of probes. When the reaction mixture was heated to denature the duplex formed, the fluorescence anisotropy value of the perfect-match solution does not revert to the initial value, while that of the mismatch again comes back as the assembled fluorescent nanoparticles dispart. The present approach has been demonstrated with the discrimination of a single base mutation in codon 12 of a K-ras oncogene that is of significant value for colorectal cancers diagnosis, and the wild type and mutant type were successfully scored. Due to its ease of operation and high sensitivity, it was expected that the proposed detection approach might hold great promise in practical clinical diagnosis.     

A DNA Switch for Detecting Single Nucleotide Polymorphism within a Long DNA Sequence Under Denaturing Conditions

DNA detection is usually conducted under nondenaturing conditions to favor the formation of Watson–Crick base-paring interactions. However, although such a setting is excellent for distinguishing a single-nucleotide polymorphism (SNP) within short DNA sequences (15–25 nucleotides), it does not offer a good solution to SNP detection within much longer sequences. Here we report on a new detection method capable of detecting SNP in a DNA sequence containing 35–90 nucleotides. This is achieved through incorporating into the recognition DNA sequence a previously discovered DNA molecule that forms a stable G-quadruplex in the presence of 7 molar urea, a known condition for denaturing DNA structures. The systems are configured to produce both colorimetric and fluorescent signals upon target binding.     

Genotyping--from genomic DNA to genotype in a single tube

Nucleotide variations in the human genome, such as single-nucleotide polymorphisms, have been researched more intensively since it became apparent that these deviations are linked to various diseases and also several side effects of drugs. The investigation of genomic DNA in the laboratory requires routine methods that are time-, labour-, and cost-effective. These criteria are fulfilled by so-called closed-tube methods, which are applied directly to isolated genomic DNA without any preamplification.     

Ag(I) ion mediated formation of a C-A mispair by DNA polymerases

Silver turns up the A-C: In the presence of Ag(I) ions, a DNA polymerase incorporated deoxyadenosine (from dATP) at the site opposite cytosine in the template strand to afford the full-length product (see scheme), meaning that DNA polymerases prefer a C-Ag(I)-A base pair to the more thermodynamically stable C-Ag(I)-C base pair.     

Anthraquinone as a redox label for DNA: synthesis, enzymatic incorporation, and electrochemistry of anthraquinone-modified nucleosides, nucleotides, and DNA

Modified 2'-deoxynucleosides and deoxynucleoside triphosphates (dNTPs) bearing anthraquinone (AQ) attached through an acetylene or propargylcarbamoyl linker at the 5-position of pyrimidine (C) or at the 7-position of 7-deazaadenine were prepared by Sonogashira cross-coupling of halogenated dNTPs with 2-ethynylanthraquinone or 2-(2-propynylcarbamoyl)anthraquinone. Polymerase incorporations of the AQ-labeled dNTPs into DNA by primer extension with KOD XL polymerase have been successfully developed. The electrochemical properties of the AQ-labeled nucleosides, nucleotides, and DNA were studied by cyclic and square-wave voltammetry, which show a distinct reversible couple of peaks around -0.4 V that make the AQ a suitable redox label for DNA.     

Loading Dynamics of a Sliding DNA Clamp

Sliding DNA clamps are loaded at a ss/dsDNA junction by a clamp loader that depends on ATP binding for clamp opening. Sequential ATP hydrolysis results in closure of the clamp so that it completely encircles and diffuses on dsDNA. We followed events during loading of an E. coli β clamp in real time by using single‐molecule FRET (smFRET). Three successive FRET states were retained for 0.3 s, 0.7 s, and 9 min: Hydrolysis of the first ATP molecule by the γ clamp loader resulted in closure of the clamp in 0.3 s, and after 0.7 s in the closed conformation, the clamp was released to diffuse on the dsDNA for at least 9 min. An additional single‐molecule polarization study revealed that the interfacial domain of the clamp rotated in plane by approximately 8° during clamp closure. The single‐molecule polarization and FRET studies thus revealed the real‐time dynamics of the ATP‐hydrolysis‐dependent 3D conformational change of the β clamp during loading at a ss/dsDNA junction.     

Dynamic-light-scattering-based sequence-specific recognition of double-stranded DNA with oligonucleotide-functionalized gold nanoparticles

An ultrasensitive and simple dynamic-light-scattering (DLS) assay for the sequence-specific recognition of double-stranded DNA (dsDNA) was developed based on detection of the average diameter change of Au nanoparticle (AuNP) probes modified with oligonucleotides 5'-TTTCTCTTCCTT- CTCTTC-(T)(12)-SH-3' (Oligo 1) and 5'-TTCTTTCTTTTCTTTTTC-(T)(12)- SH-3' (Oligo 2). The target dsDNA was composed of two complementary oligonucleotides: 5'-AAAGAGAAGGAAGAGAAGAAGAAAGAAAAGAAAAAG-3' (Oligo 3) and 3'-TTTCTCTTCCTTCTCTTCTTCTTTCTTTTCTTTTTC-5' (Oligo 4). Hybridization of the two AuNPs-Oligo probes with the target dsDNA induced aggregation of the target dsDNA by forming triplex DNA, which accordingly increased the average diameter. This diameter change could then be detected by DLS. The average diameter was proportional to the target dsDNA concentration over the range from 593 fM to 40 pM, with a detection limit of 593 fM. Moreover, the assay had good sequence specificity for the target dsDNA.     

Interfacing Synthetic DNA Logic Operations with Protein Outputs

DNA logic gates are devices composed entirely of DNA that perform Boolean logic operations on one or more oligonucleotide inputs. Typical outputs of DNA logic gates are oligonucleotides or fluorescent signals. Direct activation of protein function has not been engineered as an output of a DNA‐based computational circuit. Explicit control of protein activation enables the immediate triggering of enzyme function and could yield DNA computation outputs that are otherwise difficult to generate. By using zinc‐finger proteins, AND, OR, and NOR logic gates were created that respond to short oligonucleotide inputs and lead to the activation or deactivation of a split‐luciferase enzyme. The gate designs are simple and modular, thus enabling integration with larger multigate circuits, and the modular structure gives flexibility in the choice of protein output. The gates were also modified with translator circuits to provide protein activation in response to microRNA inputs as potential cellular cancer markers.     

Fluorescence Detection of Single‐Nucleotide Polymorphisms with a Single,Self‐Complementary,Triple‐Stem DNA Probe

Singled out for its singularity : In a single‐step, single‐component, fluorescence‐based method for the detection of single‐nucleotide polymorphisms at room temperature, the sensor is comprised of a single, self‐complementary DNA strand that forms a triple‐stem structure. The large conformational change that occurs upon binding to perfectly matched (PM) targets results in a significant increase in fluorescence (see picture; F=fluorophore, Q=quencher).

     

Label-free molecular beacon system based on DNAs containing abasic sites and fluorescent ligands that bind abasic sites

A new class of label-free molecular beacon (MB) system based on DNA strands that contain abasic (AP) sites (AP-DNA) and adopt stem-loop structures, in combination with fluorescent ligands that bind these AP sites, has been developed. Unlike a conventional MB, which requires covalent labeling of the MB with a fluorophore and a quencher, the developed system (APMB) does not require covalent attachment of signal transduction units. Detailed sensing functions of a series of APMB systems were examined with the aid of the fluorescent ligand named ATMND to provide insight into the design strategy for APMB systems. The effects of the stem length and the position of the AP site in the stem moiety on the fluorescence response of the APMB system were examined. Genotyping of a G/C SNP of PCR amplification products was successfully demonstrated with the APMB system and blue-fluorescent ATMND as a ligand. The APMB system was further extended to a system that utilized green-fluorescent lumiflavin.     

Induced-fit recognition of DNA by small circular oligonucleotides

We have investigated the molecular interaction between cyclic and linear oligonucleotides. We have found that short cyclic oligonucleotides can induce hairpinlike structures in linear DNA fragments. By using NMR and CD spectroscopy we have studied the interaction of the cyclic oligonucleotide d with d, as well as with its two linear analogs d(GTCCCTCA) and d(CTCAGTCC). Here we report the NMR structural study of these complexes. Recognition between these oligonucleotides occurs through formation of four intermolecular Watson-Crick base pairs. The three-dimensional structure is stabilized by two tetrads, formed by facing the minor-groove side of the Watson-Crick base pairs. Overall, the structure is similar to those observed previously in other quadruplexes formed by minor-groove alignment of Watson-Crick base pairs. However, in this case the complexes are heterodimeric and are formed by two different tetrads (G:C:A:T and G:C:G:C). These complexes represent a new model of DNA recognition by small cyclic oligonucleotides, increasing the number of potential applications of these interesting molecules.     

GA and AG sequences of DNA react with cisplatin at comparable rates

The sequence selectivity of the antitumor drug cisplatin (cis-[PtCl(2)(NH(3))(2)] (1)) between the 5'-AG-3' and 5'-GA-3' sites of DNA has been a matter of discussion for more than twenty years. In this work, we compared the reactivity of GA and AG sequences of DNA towards the aquated forms of cisplatin (cis-[PtCl(NH(3))(2)(H(2)O)](+) (2), cis-[Pt(NH(3))(2)(H(2)O)(2)](2+) (3), and cis-[Pt(OH)(NH(3))(2)(H(2)O)](+) (4)) using two sets of experiments. In the first, we investigated a DNA hairpin, whose duplex stem contained a TGAT sequence as the single reactive site, and determined the individual rate constants of platination with 2 and 3 for G and A in acidic solution. The rate constants at 20 degrees C in 0.1M NaClO(4) at pH 4.5+/-0.1 were 0.09(4) M(-1)s(-1) (G) and 0.11(3) M(-1)s(-1) (A) for 2, and 9.6(1) M(-1)s(-1) (G) and 1.7(1) M(-1)s(-1) (A) for 3. These values are similar to those obtained previously for an analogous hairpin that contained a TAGT sequence. The monoadducts formed with 2 by both GA purines are extremely long-lived, partly as a result of the slow hydrolysis of the chloro monoadduct at A, and partly because of the very low chelation rate (1.4 x 10(-5)s(-1) at 20 degrees C) of the aqua monoadduct on the guanine. In the second set of experiments, we incubated pure or enriched samples of 1, 2, 3, or 4 for 18-64 h at 25 degrees C with a 19 base pair (bp) DNA duplex, whose radiolabeled top strand contained one GA and one AG sequence as the only reactive sites. Quantification of the number of GA and AG cross-links afforded a ratio of about two in favor of AG, irrespective of the nature of the leaving ligands. These results disagree with a previous NMR spectroscopy study, and indicate that GA sequences of DNA are substantially more susceptible to attack by cisplatin than previously thought.     

Assembly of DNA Nanostructures with Branched Tris‐DNA

Branched tris‐DNA, in which two oligonucleotides of the same sequence and one other oligonucleotide of a different sequence are connected with a rigid central linker, was prepared chemically by using a DNA synthesizer. Two branched tris‐DNA molecules with complementary DNA sequences form dimer and tetramer as well as linear and spherical oligomer complexes. The complex formation was studied by UV/thermal denaturation, enzyme digestion, gel electrophoresis, and AFM imaging.