Potential energy of <Superscript>∞</Superscript>H<Stack><Subscript>2</Subscript><Superscript>-</Superscript></Stack>(<Superscript>2</Superscript>∑<Stack><Subscript>u</Subscript><Superscript>+</Superscript></Stack> in the bound-state region

An accurate calculation of the lowest negative electronic state of H ₂ ^- (fixed nuclei) is reported using the CCSD(T) method and doubly augmented cc-pv5z basis set. Comparison has been made with the reference data by Senekowitsch et al. [Chem. Phys. Lett. 111 (1984) 211]. Owing to larger size of the basisset and inclusion of triple excitations, no vertical shift in this work is necessary to reproduce the asymptotics of H + H ^-. In addition, the effect of basis-set truncation is estimated, based on the complete-basis-set extrapolation method. The contribution of correlated electron-proton motion to the electron-energy curve for H₂ ^– dynamics is pointed out.Dedicated to Prof. Jií Horáek on the occasion of his 60th birthday.     

O<Subscript>2</Subscript> photodesorption from AuO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> and Au<Subscript>2</Subscript>O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack>

Using time-resolved photoelectron spectroscopy, the decay channels of AuO₂⁻ and Au₂O₂⁻ following photoexcitation with 3.1-eV photons have been studied. For AuO₂⁻, a state with a rather long lifetime of 30 ps has been identified. Its decay path could not be determined but photodesorption can be excluded. For Au₂O₂⁻, the spectra indicate O₂ desorption after 3.1-eV photoexcitation on a time scale of 1 ps. While comparing these results on Au _n O₂⁻ with analogous data on Ag _n O₂⁻ clusters, a discernible pattern emerges: for dissociatively bound O₂(AuO₂⁻, Ag₃O₂⁻), there are long-living excited states which do not decay by oxygen desorption, while for molecular chemisorption (Au₂O₂⁻, Ag₂O₂⁻, Ag₄O₂⁻, Ag₈O₂⁻), the 3.1-eV photoexcitation triggers fast O₂ desorption with a high quantum yield.     

EIT Ground State Cooling Scheme of <Superscript>171</Superscript>Yb<Superscript>+</Superscript> Based on the <Superscript>2</Superscript>S<Subscript>1/2</Subscript>→<Superscript>2</Superscript>P<Subscript>1/2</Subscript> Cooling Transition

We propose a method for EIT ground state cooling of ¹⁷¹Yb+ ion, which involves three light fields with detuning on a MHz scale. The steady-state mean vibrational quantum number is calculated to be less than 0.005. Efficient cooling is achievable in a motional-mode frequency range of 2π · (1.5 ± 0.5 MHz).     

On the energy of the 8<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> 1479-keV level in <Superscript>178</Superscript>Hf

The difference in the 332-and 326-keV transition energies from ¹⁷⁸Ta decay is measured with a magnetic β spectrometer and a γ spectrometer. The energy of the 332-keV transition (E(332) = 331 607 ± 4 eV) and the energy of the 8 ₂ ^? 1479-keV level in ¹⁷⁸Hf (E(1479) = 1479001 ± 6 eV) are determined with high accuracy.     

Analysis of the vector form factors f<Superscript>+</Superscript><Subscript>Kπ</Subscript>(Q<Superscript>2</Superscript>) and f<Superscript>-</Superscript><Subscript>Kπ</Subscript>(Q<Superscript>2</Superscript>) with light-cone QCD sum rules

In this article, we calculate the vector form factors f⁺ _Kπ(Q²) and f^- _Kπ(Q²) within the framework of the light-cone QCD sum rule approach. The numerical values of f⁺ _Kπ(Q²) are compatible with existing theoretical calculations, and the central value of f⁺ _Kπ(0) (f⁺ _Kπ(0)=0.97) is in excellent agreement with the values from chiral perturbation theory and lattice QCD. The values of |f^- _Kπ(0)| are very large compared to the theoretical calculations and experimental data, and they cannot give any reliable prediction. At large momentum transfer with Q² > 5 GeV², the form factors f⁺ _Kπ(Q²) and |f^- _Kπ(Q²)| can either show the asymptotic behavior of or decrease more quickly than ; more experimental data are needed to select the ideal sum rules. PACS 12.38.Lg; 12.38.Bx; 12.15.Hh     

Odd autoionizing 2p<Subscript>1/2</Subscript><Superscript>5</Superscript>n(s<Superscript>′</Superscript>/d<Superscript>′</Superscript>) resonances of Ne excited from the 2p<Superscript>5</Superscript>3p[K]<Subscript>J</Subscript> states

Absolute photoionization cross sections for Ne atoms in the excited levels (Paschen notation ) were calculated at near threshold energies within the configuration interaction Pauli-Fock approach including core polarization. The computed spectra and the lineshape parameters of the odd parity 2p_1/2 ⁵ns^′/d^′ autoionizing resonances are found to be in good agreement with high resolution laser spectroscopic results. Guided by the theoretical results, improved analyses of the measured spectra by superimposed Fano-type profiles were achieved. Theoretical predictions are presented for resonances which have not yet been studied experimentally. In addition, we report the absolute partial photoionization cross sections for the ²P_3/2 and ²P_1/2 channel at photoelectron energies up to 7 eV. Except for the highest lying 2p₁(¹S₀) level, these cross sections monotonically decrease with energy (as reported earlier in single-electron calculations for the Ne(2p⁵3p) configuration) with branching ratios which essentially reflect the core composition of the 2p_x levels. For the 2p₁ level the resonance structure and the partial cross sections are strongly influenced by a Cooper-Seaton minimum in the d_3/2 ^′ channel,located just above the ²P_1/2 ionization limit.     

Collisional broadening of CO<Subscript>2</Subscript> 10<Superscript>0</Superscript>0–00<Superscript>0</Superscript>1 transition absorption lines by N<Subscript>2</Subscript>O molecules

Relative coefficients of collisional broadening caused by N₂O molecules and their temperature dependences are determined for absorption lines (10⁰0–00⁰1 transition, R-branch) of the CO₂ molecule.     

Temperature dependence of the quenching of N<Subscript>2</Subscript> (C <Superscript>3</Superscript>Π<Subscript>u</Subscript>) by N<Subscript>2</Subscript> (X) and O<Subscript>2</Subscript> (X)

The temperature dependences of the quenching rate constants of the states N₂ (${\rm C} \ {^{3}{ \rm \Pi }_{u}}${\rm C} \ {^{3}{ \rm \Pi }_{u}} v^′=0,1) by N₂ (X) and of the state N₂ (${\rm C} \ {^{3}{ \rm \Pi }_{u}} \ v^{\prime}=0${\rm C} \ {^{3}{ \rm \Pi }_{u}} \ v^{\prime}=0) by O₂ (X) are studied. Time-resolved light emission from the gas was analyzed in the temperature range from 300 K to 210 K keeping the gas at constant density. In case of quenching by N₂ (X), the quenching rate constant for the vibrational level v^′= 0 increases by (13 ±3)% with gas cooling whereas the quenching rate constant for v^′= 1 decreases by (5.0 ±2.5)% in this temperature range. For quenching by O₂ (X), the quenching rate constant decreases by (3 ±2)% with gas cooling. The temperature variation of the N₂ (C ³Π_u v^′=0) emission intensity for pure nitrogen and dry air are calculated using the obtained quenching rate constants and is compared with the experimental data available in the literature.     

Photoluminescence of sol–gel-derived Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript> thin-film phosphors with Mg<Superscript>2+</Superscript> and Al<Superscript>3+</Superscript> co-doping

Red-light-emitting Y₂O₃:Eu³⁺ thin-film phosphors were synthesized using a sol–gel process. The effect of Mg²⁺ and Al³⁺ co-dopants on the Y₂O₃:Eu³⁺ thin-film phosphor photoluminescence (PL) property was investigated. At a certain concentration, both Mg²⁺ and Al³⁺ co-dopants were found to further enhance the PL emission intensity of Y₂O₃:Eu³⁺ thin-film phosphors. The optimum PL emission intensity was observed in Y₂O₃:12%Eu³⁺, 7%Mg²⁺ and Y₂O₃:12%Eu³⁺, 2%Al³⁺ phosphor films. From our results, the enhancement of the emission intensity by the Mg²⁺ and Al³⁺ co-dopants is explained in terms of the creation of defect states near the Y(4d+5s) conduction band, which overlap with the Eu³⁺ charge-transfer state (CTS). The overlapping leads to CTS broadening and consequently induces higher absorption and hence an increase of the emission intensity. From X-ray diffraction results, we have found that there is no additional phase formed in the co-doped phosphor films. PACS 68.55.Ln; 78.55.-m; 81.20.Fw     

Concentration quenching of Eu<Superscript>2+</Superscript> in a novel blue–green emitting phosphor: Ba<Subscript>2</Subscript>ZnSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript>

A novel blue–green emitting phosphor Ba₂ZnSi₂O₇: Eu²⁺ was prepared by a combustion synthesis (CS) method. An efficient green emission under conditions ranging from ultraviolet to visible light was observed. The emission spectrum shows a single intensive band centered at 503 nm, which corresponds to the 4f ⁶5d ¹→4f ⁷ transition of Eu²⁺. The excitation spectrum is a broad band extending from 260 to 465 nm, which matches the emission of ultraviolet light-emitting diodes (UV-LEDs). The critical quenching concentration of Eu²⁺ in Ba₂ZnSi₂O₇:Eu²⁺ phosphor is about 0.05 mol. The corresponding concentration quenching mechanism is verified to be a dipole–dipole interaction. The value of the critical transfer distance is calculated as 19 Å, which is in good agreement with the value (20 Å) derived from the experimental data.     

<Superscript>2</Superscript>H NMR investigation of the transition to the proton glass state in the Cs<Subscript>5</Subscript>H<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript> · 0.5H<Subscript>2</Subscript>O crystal

A crystal of the Cs₅H₃(SO₄)₄ · xH₂O (x ≈ 0.5) (PCHS) compound, which belongs to the family of proton conductors with a complex system of hydrogen bonds, is investigated by ²H NMR spectroscopy. The temperature and orientation dependences of the ²H NMR spectra are measured and analyzed. It is established that, upon transition to the glassy phase at the temperature T _g = 260 K, the parameters characterizing the proton exchange between positions in hydrogen bonds remain unchanged to within the limits of experimental error. The protons in the two-dimensional network of hydrogen bonds in the (001) plane are dynamically disordered over possible positions down to temperatures considerably lower than the glass transition point T _g . However, water molecules are fixed at particular structural positions in the phase transition range. In PCHS crystals with a nonstoichiometric water content, this circumstance can be responsible for the frustration that leads to the formation of the glassy state.     

Optical Flow-Through Sensor for the Determination of Norfloxacin Based on Emission of KMnO<Subscript>4</Subscript>–Na<Subscript>2</Subscript>SO<Subscript>3</Subscript>–Tb<Superscript>3+</Superscript> System

A simple and selective method to determine norfloxacin using an optical flow-through sensor has been developed. The present sensor was prepared by packing anionic ion exchange resin in a glass tube, followed by introducing KMnO₄ solution to the glass tube for immobilization on resin. The optical sensor is based on the emission intensity from the Tb(III) solution sensitized by norfloxacin. The excitation of norfloxacin occurred by the chemiluminescence from the reaction of KMnO₄ and Na₂SO₄ solutions. The effects of pH, concentration of Tb(III) ion, KMnO₄ and Na₂SO₄ solutions and flow rate of the norfloxacin solution on the chemiluminescence intensity were studied to find the optimum experimental conditions. The emission intensity increased linearly with increasing norfloxacin concentration from 1.0 × 10⁻³ to 1.0 × 10⁻⁸ M and the detection limit (3σ) was 8.7 × 10⁻⁹. The applicability of the present method was demonstrated by determination of norfloxacin in various pharmaceutical preparations and serum sample.     

Origin of the structural local transition in the molecular impurity ion MnO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack> in the K<Subscript>3</Subscript>Na(CrO<Subscript>4</Subscript>)<Subscript>2</Subscript> ferroelastic

A new model is proposed for a local transition in a Jahn-Teller impurity center in a crystal with a ferroelastic (ferroelectric) phase transition. This model is based on direct interaction of the order parameter of the phase transition in the matrix with the Jahn-Teller impurity degrees of freedom. It is shown that, under these conditions, the order parameter field can induce lifting of degeneracy of the electronic states active in the Jahn-Teller effect, which is accompanied by a transition from the Jahn-Teller effect to the pseudo-Jahn-Teller effect with its subsequent suppression. As a result, a decrease in temperature gives rise to a structural local transition in the region of the low-symmetry ferroelastic (ferroelectric) matrix phase from the many-well local adiabatic to a single-well potential. The model proposed allows interpretation of experimental data obtained in an EPR study of the molecular impurity ion MnO ₄ ^2? in the K₃Na(CrO₄)₂ ferroelastic.     

Influence of Matrix Nature on the Structural Characteristics of In<Subscript>2</Subscript>O<Subscript>3</Subscript>–CeO<Subscript>2</Subscript> and SnO<Subscript>2</Subscript>–CeO<Subscript>2</Subscript> Composites Fabricated by the Impregnation Method

The structural characteristics, valence states, and distribution of cerium ions between the components in In₂O₃–CeO₂ and SnO₂–CeO₂ nanocomposites fabricated using the impregnation method were studied. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) were used to show that, during impregnation, cerium ions are not included into In₂O₃ crystals and are disposed only on their surface in the form of nano-sized crystallites or amorphous clusters. On the other side, under the contact of CeO₂ clusters with a surface of SnO₂ matrix crystals, cerium ions penetrate into the surface layer of these crystals. In contrast to an In₂O₃–CeO₂ system, where the addition of CeO₂ does not affect the conduction activation energy, where cerium oxide is added to SnO₂, the observed increase in the resistance of a SnO₂–CeO₂ composite is accompanied by a sufficient increase in activation energy. These data and the XPS spectra confirm the modification of the surface layers of conductive SnO₂ crystals as, a result of the penetration of cerium ions into these layers.     

<Superscript>57</Superscript>Fe emission Mössbauer spectroscopy following dilute implantation of <Superscript>57</Superscript>Mn into In <Subscript>2</Subscript>O<Subscript>3</Subscript>

Emission Mössbauer spectroscopy has been utilised to characterize dilute ⁵⁷Fe impurities in In ₂O₃ following implantation of ⁵⁷Mn (T _1/2 = 1.5 min.) at the ISOLDE facility at CERN. From stoichiometry considerations, one would expect Fe to adopt the valence state 3 + , substituting In ³⁺, however the spectra are dominated by spectral lines due to paramagnetic Fe²⁺. Using first principle calculations in the framework of density functional theory (DFT), the density of states of dilute Fe and the hyperfine parameters have been determined. The hybridization between the 3d-band of Fe and the 2p band of oxygen induces a spin-polarized hole on the O site close to the Fe site, which is found to be the cause of the Fe²⁺ state in In ₂O₃. Comparison of experimental data to calculated hyperfine parameters suggests that Fe predominantly enters the 8b site rather than the 24d site of the cation site in the Bixbyite structure of In ₂O₃. A gradual transition from an amorphous to a crystalline state is observed with increasing implantation/annealing temperature.     

Microwave dielectric properties of the 5.5Li<Subscript>2</Subscript>O–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–7TiO<Subscript>2</Subscript> ceramics

A new Li₂O–Nb₂O₅–TiO₂ (LNT) ceramic with the Li₂O:Nb₂O₅:TiO₂ mole ratio of 5.5:1:7 was prepared by solid state reaction route. The phase and structure of the ceramic were characterized by X-ray diffraction and scanning electron microscopy (SEM). The microwave dielectric properties of the ceramics were studied using a network analyzer. The microwave dielectric ceramic has low sintering temperature (∼1075°C) and good microwave dielectric properties of ε _r=42, Q×f=16900 GHz (5.75 GHz), and τ _f =63.7 ppm/°C. The addition of B₂O₃ can effectively lower the sintering temperature from 1075 to 875°C and does not induce degradation of the microwave dielectric properties. Obviously, the LNT ceramics can be applied to microwave low temperature-cofired ceramics (LTCC) devices.     

Elastic properties of TeO<Subscript>2</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Ag<Subscript>2</Subscript>O glasses

A series of glasses [(TeO₂) _x (B₂O₃)_1−x ]_1−y [Ag₂O] _y with x = 70 and y = 10, 15, 20, 25 and 30 mol% were synthesised by rapid quenching. Longitudinal and shear ultrasonic velocity were measured at room temperature and at 5 MHz frequency. Elastic properties, Poisson's ratio, microhardness, softening temperature and Debye temperature have been calculated from the measured density and ultrasonic velocity at room temperature. The experimental results indicate that the elastic constants depend upon the composition of the glasses and the role of the Ag₂O inside the glass network is discussed. Estimated parameters based on Makishima–Mackenzie theory and bond compression model were calculated in order to analyse the experimental elastic moduli. Comparison between the experimental elastic moduli data obtained in the study and the calculated theoretically by the mentioned above models has been discussed.