Synthesis and characterisation of alkaline earth-iron(III) double hydroxides

Double hydroxides containing alkaline earth and iron(III) ions were synthesised by the co-precipitation method. The solid materials obtained were characterised by a range of instrumental methods (powder X-ray diffractometry, thermogravimetry, scanning electron microscopy, energy dispersive X-ray fluorescence spectrometry, elemental maps, and infrared spectroscopy). It was found that the Ca(II)Fe(III), Mg(II)Fe(III), and Ba(II)Fe(III) double hydroxides had layered structures, while Sr(II)Fe(III) had not. The optimum conditions for synthesis of Ca(II)Fe(III)-layered double hydroxides (materials to be used in further studies) were also elaborated.     

Study of the structure of chelate fibrous ionites by IR spectroscopy

Structure of fibrous chelate ion exchangers FIBAN X-1 and FIBAN X-2 prepared by a two-step synthesis was studied by IR Fourier spectroscopy. The first step of the ion exchanger preparation consists in the production of an aminated fiber (AF). The process can be carried out in different phases: either vapor, or aqueous. It is found that conditions of the synthesis of AF affect differently the ion exchanger structure. For the ion exchanger FIBAN X-1 it does not a matter in which phase is AF synthesized, and the FIBAN X-1 sorbent has amidoamine structure. The structure of chelate ion exchanger FIBAN X-2 depends on the conditions of the synthesis of AF. When the process is carried out in aqueous medium the FIBAN X-2 has amidoamine structure, while amination in the vapor phase leads to formation of the FIBAN X-2 ion exchanger mainly containing in its structure imidazoline rings.     

Studies on fluoride adsorption capacities of amorphous Fe/Al mixed hydroxides from aqueous solutions

This study evaluated the effectiveness of amorphous iron and aluminum mixed hydroxides in removing fluoride from aqueous solutions. A series of mixed Fe/Al samples were prepared at room temperature by co-precipitating Fe and Al mixed salt solutions at pH 7.5. The compositions (Fe:Al molar ratio) of the oxides were varied as 1:0, 3:1, 2:1, 1:1 and 0:1 and the samples were characterized by XRD, BET surface area and pH_ZPC. The XRD studies indicated the amorphous nature of the samples and Al(III) incorporation on Fe(III) hydroxides. Batch adsorption studies for fluoride removal on these materials showed that the adsorption capacities of the materials were highly influenced by solution pH, temperature and initial fluoride concentration. The rate of adsorption was fast and equilibrium was attained within 2 h. The adsorption followed first-order kinetics with intraparticle diffusion as the rate determining step for all the samples. The experimental data fitted well to both Langmuir and Freundlich adsorption isotherms. All samples exhibited very high Langmuir adsorption capacities; the sample with molar ratio 1 has shown maximum adsorption capacity of 91.7 mg/g. The thermodynamic parameters were determined to study the feasibility of the adsorption process.     

Fe-Al layered double hydroxides in bromate reduction: Synthesis and reactivity

This study presents a rare use of layered double hydroxides of Fe(II) and Al(III) (Fe-Al LDH), as reported for the first time for bromate removal from aqueous solutions. The Fe-Al LDH samples were prepared with Fe/Al molar ratios of 1-4 using a co-precipitation method at pH 7, with subsequent hydrothermal treatment at 120°C. The Fe-Al LDH (molar ratio of Fe/Al=1, 2) with a layered structure exhibited nearly complete removal of bromate from initial concentration of 100μmol/dm(3) at a wide pH range of 4.0-10.5 over a 2h reaction period; the residual bromate concentration in the solution was lower than the detection limit of 0.07μmol/dm(3) (9μg-BrO(3)(-)/dm(3)). During the reaction period, bromide was released into the solution via a reduction process. Reactivity of Fe-Al LDH with a Fe/Al molar ratio of 2 did not decrease the bromate reduction efficiency during 30days.     

Long-term phosphorus effects on evolving physicochemical properties of iron and aluminum hydroxides

Iron (Fe) and aluminum (Al) hydroxides are highly reactive components in environmental processes, such as contaminant fate and transport. Phosphorus (P) sorption by these components can decrease environmental problems associated with excess accumulation of P in soils. The long-term stability of P sorbed by Fe/Al hydroxides is of major concern. Synthetic Fe and Al hydroxides coprecipitated with P (1:1 metal:P molar ratio) were incubated at 70 degrees C for 24 months to simulate natural long-term weathering processes that could influence the stability of sorbed P. Heat incubation (70 degrees C) of the untreated (no P) Al hydroxides resulted in drastic decreases (within the first month of incubation) in oxalate-Al extractability, specific surface area (SSA), and micropore volume with time. These changes were consistent with the formation of pseudoboehmite. Untreated Fe hydroxides showed no formation of crystalline components following heating (70 degrees C) for 24 months. Much smaller changes in oxalate-Al, P extractability, and SSA values were observed in the P-treated Al particles when compared with the untreated. Phosphorus treatment of both Fe and Al hydroxides stabilized the particle surfaces and prevented structural arrangements toward a long-range ordered phase. Slight reduction in SSA of the P-treated particles was related to dehydration phenomena during heating at 70 degrees C. Monitoring of physicochemical properties of the solids after heating at 70 degrees C for 2 years showed that sorbed P may be stable in the long-term. Understanding long term physicochemical properties may help engineers to optimize the Fe/Al hydroxides performance in several environmental/industrial applications.     

Gibbs energies of formation of hydroxides of lanthanides and yttrium

The pH values of the formation of hydrates in solutions of yttrium(III), cerium(III), samarium(III), europium(III), erbium(III), and ytterbium(III) were determined by conductometric titration. The solubility products and Gibbs energies of formation for hydroxides for the elements listed were calculated. The average Gibbs energy of dissolution for lanthanide hydroxides was found to be approximately 149.83 ± 0.90 kJ/mol. The Gibbs energies of formation for hydroxides of the remaining lanthanides were assessed on this basis.     

Spontaneous magnetization in Ni-Al and Ni-Fe layered double hydroxides

Layered double hydroxides containing paramagnetic Ni (II) and diamagnetic/paramagnetic Al (III)/Fe (III) ions have been prepared and characterized. Ni 2Al(OH) 6(NO 3). nH 2O ( 1), Ni 2Fe(OH) 6(NO 3). nH 2O ( 2), Ni 2Fe(OH) 6(C 6H 8O 4) 0.5. nH 2O ( 3), and Ni 2Fe(OH) 6(C 10H 16O 4) 0.5. nH 2O ( 4) were prepared by coprecipitation at controlled pH as polycrystalline materials with the typical brucite-like structure, with alternating layers of hydroxide and the corresponding anions, which determine the interlayer separation. Magnetic studies show the appearance of spontaneous magnetization between 2 and 15 K for these compounds. Interestingly, the onset temperature for spontaneous magnetization follows a direct relationship with interlayer separation, since this is the only magnetic difference between compounds 2, 3, and 4. Magnetic and calorimetric data indicate that long-range magnetic ordering is not occurring in any of these materials, but rather a freezing of the magnetic system in 3D due to the magnetic disorder and competing intra- and interlayer interactions. Thus, these hydrotalcite-like magnetic materials can be regarded as spin glasses.     

Rhodium-catalysed 1,4-addition of diarylindium hydroxides to alpha,beta-unsaturated carbonyl compounds

Diarylindium(III) hydroxides react with alpha,beta-unsaturated carbonyl compounds in the presence of a rhodium catalyst to afford the 1,4-addition products in high yield. This reaction demonstrates the utility of diarylindium(III) hydroxide as an aryl source with rhodium catalysts.     

非离子表面活性剂胶束增溶显色反应机理的研究 III:在Fe(III)-PAN-Triton X-100体系中胶束对金属离子反应活性的影响

Fe (III) and PAN form the complex Fe(PAN)2OH which can be extracted into CHCl3. The CHCl3 extract shows absorption maxima at 550 nm and 775 nm (log E550 = 4.06, log e775 = 4.08). In the Fe(III)--PAN--Triton X-100 system, two complex species (Fe(PAN)2)+ and/or Fe(PAN)2OH may be formed. (Fe(PAN)2)+ exhibits a stronger absorption peak at 550 nm (log E550 =4.36). In this paper the effect of Triton X-100 micelles on the Fe(III)-PAN reaction has been investigated in detail. We consider that the presence of high density of ethereal oxygen chains in Triton X-100 micelles enables to concentrate hydrated Fe(III) ions and change their existing state. Moreover, the micelles not only increase the reactivity of Fe(III), but also enhance the rate of the color reaction.     

Studies on the effect of non-ionic surfactant micelles on color reactions: III. The effect of micelles on metal ion reactivity in the Fe(III)-PAN-Triton X-100 system

Fe(III) and PAN form Fe(PAN),OH complex in CHCl₃ extract which shows absorption maxima at 550 nm and 775 nm (log ε₅₅₀,= 4.06, log ε₇₇₅ = 4.08). In the Fc(III)-PAN-Triton X-100 system, two complex species Fe(PAN)₂⁺ and/or Fe(PAN)₂OH may be formed. Fe(PAN)₂⁺ possesses a strongly absorbing peak at 550 nm (log ε₅₅₀ = 4.36). In this paper the effect of Triton X-100 micelles on the Fe(III)-PAN color reaction has been investigated in detail. We consider that the high density of ether linkages in Triton X-100 micelles concentrate hydrous Fe(III) ions and change their existing state. Moreover, the micelles not only raise the reactivity of Fe(III), but also enhance the rate of the color reaction.     

硫掺杂镍铁层状双氢氧化物的氧析出电催化性能

氧析出反应(OER)是裂解水、二氧化碳还原、以及可充电的锌空电池等许多技术中重要的半反应,但受限于其迟缓的反应动力学,开发高效的氧析出催化剂迫在眉睫.在OER出反应中,性能较好的非贵金属催化剂主要是第四周期过渡金属的一些化合物,如氧化物、氢氧化物、硫化物、硒化物、磷化物等等.在这些材料中,镍铁双金属化合物被认为是最优的氧析出材料,尤其是镍铁层状双氢氧化物(Ni Fe-LDHs)它拥有较大的电化学活性面积以暴露较多活性位点,同时镍铁两种过渡金属元素存在协同效应,使得其具有良好的催化性能.然而,这一类材料的OER性能仍然有优化的空间.研究表明,将硫化物氧化得到的氢氧化物会有少量的硫元素残留,这种硫残留的氢氧化物拥有十分优异的OER性能.为了进一步认识硫的引入对Ni Fe-LDHs的OER行为的影响,本文通过水热法合成了硫掺杂的Ni Fe-LDHs,考察了硫的掺杂量对催化剂性能的影响,验证了微量硫的存在对Ni Fe-LDHs的OER性能的贡献.扫描电镜图片显示,水热合成的催化剂是厚度为几十纳米的薄片,拥有较高的比表面积, X射线荧光光谱分析证明合成的硫掺杂Ni Fe-LDHs中镍铁的元素比例为4:1,而且硫的掺杂量并不影响催化剂的形貌和其中镍铁元素比.X射线光电子能谱分析表明,硫原子的引入使得铁原子结合能降低,即硫与铁的相互作用部分降低了铁的价态,这种硫和铁的相互作用能够优化OER反应中间体OH*与O*在铁活性位点上的吸附自由能,降低氧析出反应的过电势.电化学测试表明,拥有0.43%的硫掺杂Ni Fe-LDHs拥有最好的氧析出性能, 10 m A cm^-1下超电势仅有257 m V, Tafel斜率61.5 m V dec^-1.此后,随着硫掺杂量的提升,其性能先保持稳定,随后有所下降.在稳定测试中,硫掺杂的镍铁层状双氢氧化物在10 m Acm-1电流密度下循环30 h后过电位仅衰减14 m V.在对稳定性测试后的催化剂进行表征表明,催化剂发生了轻微了变形,但这对性能的影响不大.综上,本文提供了一种简便的通过非金属元素掺杂调控过渡金属氧化物的结构和电子态的方法,有望为设计高活性OER电催化剂提供新思路.     

Adsorption of alkylammonium chlorides by freshly precipitated aluminum and iron(III) hydroxides

Adsorption of alkylammonium chlorides by freshly precipitated hydroxides of aluminum and iron(III) was studied. Equations most fully describing the experimentally obtained data were chosen.     

Composition and ionic change capacity variation of surfactant-intercalated MgFe-layered double hydroxides in the one step synthesis

Surfactant-intercalated MgFe-layered double hydroxides (MgFe-LDHs) were successfully synthesized via one-step self-assembly of the surfactants (sodium dodecyl sulfate, 1-hexadecane sulfate, and sodium dodecyl benzene sulfonate) and the LDH precursors without avoiding dissolved CO₃ ^2?. As a control, p-toluene sulfonic acid was used to further study the functions of surfactants. The detailed characterization of the surfactant intercalated MgFe-LDHs and their intermediates confirm that the basal spacing changes of the formed LDHs derive from the release of surfactants out of LDH interlayers or the adsorption of surfactants from the solution in the reaction. Besides, the Mg/Fe ratio of the LDH sheets increases with the reaction and the corresponding ionic exchange capacity (IEC) of the MgFe-LDHs decreases. The final surfactant intercalated MgFe-LDH particles are the mixture of MgFe-LDH sheets with different composition and IEC, which can be the basic principle of LDH preparation for different applications. Also the Mg/Fe ratio of the surfactant intercalated MgFe-LDHs decreases with the increase of molecular length of surfactants used.     

Immobilization of anionic iron(III) porphyrins into ordered macroporous layered double hydroxides and investigation of catalytic activity in oxidation reactions

The first generation anionic iron(III) porphyrin [Fe(TSPP)] and the second generation anionic complexes [Fe(TDFSPP)], [Fe(TCFSPP)], and [Fe(TDCSPP)] were immobilized into three-dimensionally macroporous layered double hydroxide (3DM-LDH), using the direct reconstruction of 3DM-LDH from macroporous mixed oxides MOX or the anionic exchange on DDS intercalated 3DM-LDH. The macroporous layered double hydroxides were obtained at the surface of nanometric polystyrene spheres, which were synthesized by an inverse opal method. Polystyrene was removed after calcination in oxidizing atmosphere, nanostructured mixed oxides (3DM-MOX) were obtained, which after reconstruction give origin to macroporous layered double hydroxide (3DM-LDH). Following metalloporphyrin immobilization, the resulting materials were characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), UV–vis (glycerin mull) spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy (ATR/FTIR), and electron paramagnetic resonance (EPR). Results revealed that the complexes are either immobilized at the surface of the macroporous layered double hydroxide or intercalated between the layers, displacing some dodecylsufate anions. The obtained materials were investigated as catalysts for oxidation reactions, to find out whether they function as cytochrome P-450 models.     

Synthesis of Cd/(Al+Fe) layered double hydroxides and characterization of the calcination products

Layered double hydroxides (LDHs) containing Cd(II), Al(III), and Fe(III) in the brucite-like layers with different starting Fe/Al atomic ratios and with nitrate as counteranion have been prepared following the coprecipitation method at a constant pH value of 8. An additional Cd(II),Al(III)-LDH sample interlayered with hexacyanoferrate(III) ions has been prepared by ionic exchange at pH 9. The samples have been characterized by elemental chemical analysis, powder X-ray diffraction (PXRD), and FT-IR spectroscopy. Their thermal stability has been assessed by thermogravimetric and differential thermal analyses (TG-DTA) and mass spectrometric analysis of the evolved gases. The PXRD patterns of the solids calcined at 800 °C show diffraction lines corresponding to Cd(Al)O and spinel-type materials, which precise nature (CdAl₂O₄, Cd_1−xFe_2+xO₄, or Cd_xFe_2.66O₄) depends on location and concentration of iron in the parent material or precursor.     

Collection of iron(III) from homogeneous aqueous solutions on membrane filters using Chromazurol B with Triton X-100.

A membrane filtration method was examined concerning the effective collection of iron(III) from a homogeneous aqueous solution with Chromazurol B (CAB), one of the triphenylmethane dyes, as a precipitating reagent in the presence of a non-ionic surfactant, polyethylene glycol mono[4-(1,1,3,3-tetramethylbutyl)phenyl]ether (Triton X-100). A formed blue Fe(III)-CAB complex was collected as a precipitate on a membrane filter by filtration under suction from a homogeneous aqueous solution in the pH range over about 2. The original solution was prepared at a concentration ratio of CAB to Fe(III) of to 10, and that of Triton X-100 to CAB of 10 to 100. It was then adjusted to a pH value of between 1.0 and 6.5. A linear relationship (r = 0.999) was obtained between the initial concentration and the found one of Fe(III) in the range of 2.0 x 10(-5) to 4.0 x 10(-4) mol dm(-3) at a fixed concentration ratio of CAB to Fe(III) of 3 and that of Triton X-100 to CAB of 20. This membrane filtration with CAB and Triton X-100 may be utilized for the separation of Fe(III) as a background species.     

Topochemical synthesis of co-fe layered double hydroxides at varied fe/co ratios: unique intercalation of triiodide and its profound effect

Co-Fe layered double hydroxides at different Fe/Co ratios were synthesized from brucite-like Co(2+)(1-x)Fe(2+)(x)(OH)(2) (0 ≤ x ≤ 1/3) via oxidative intercalation reaction using an excess amount of iodine as the oxidizing agent. A new redoxable species: triiodide (I(3)(-)), promoted the formation of single-phase Co-Fe LDHs. The results point to a general principle that LDHs with a characteristic ratio of total trivalent and divalent cations (M(3+)/M(2+)) at 1/2 may be the most stable in the oxidative intercalation procedure. At low Fe content, e.g., starting from Co(2+)(1-x)Fe(2+)(x)(OH)(2) (x < 1/3), partial oxidation of Co(2+) to Co(3+) takes place to reach the M(3+)/M(2+) threshold of 1/2 in as-transformed Co(2+)(2/3)-(Co(3+)(1/3-x)-Fe(3+)(x)) LDHs. Also discovered was the cointercalation of triiodide and iodide into the interlayer gallery of as-transformed LDH phase, which profoundly impacted the relative intensity ratio of basal Bragg peaks as a consequence of the significant X-ray scattering power of triiodide. In combination with XRD simulation, the LDH structure model was constructed by considering both the host layer composition/charge and the arrangement of interlayer triiodide/iodide. The work provides a clear understanding of the thermodynamic and kinetic factors associated with the oxidative intercalation reaction and is helpful in elucidating the formation of LDH structure in general.     

Formation and Crystallization of Fe(III) Hydroxides. Influence of precipitation temperature and the nature of the starting Fe(III) salt on Fe(III) hydroxide crystallization in alkaline medium

It is shown that amorphous precipitates of Fe(III) hydroxides are composed of two phases, namely weakly magnetic primary particles and ferrimagnetic fine-grained particles. The relative proportion of the two phases, the type of phase transitions and the rate of amorphous precipitate crystallization during the ageing process are determined by the precipitation temperature. The crystallization of Fe(III) hydroxides during the ageing in mother liquors occurs by the “oriented growth” mechanism.     

Synthesis and characterization of sulfate and dodecylbenzenesulfonate intercalated zinc-iron layered double hydroxides by one-step coprecipitation route

Inorganic sulfate- and organic dodecylbenzenesulfonate (DBS)-intercalated zinc-iron layered double hydroxides (LDHs) materials were prepared by one-step coprecipitation method from a mixed salt solutions containing Zn(II), Fe(II) and Fe(III) salts. The as-prepared samples have been characterized by X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), low-temperature nitrogen adsorption, scanning electron microscopy (SEM), inductively coupled plasma emission spectroscopy (ICP), and Mössbauer spectroscopy (MS). The XRD analyses demonstrate the typical LDH-like layered structural characteristics of both products. The room temperature MS results reveal the characteristics of both the Fe(II) and Fe(III) species for SO₄²⁻-containing product, while only the Fe(III) characteristic for DBS-containing one. The combination characterization results and Rietveld analysis illustrate that the SO₄²⁻-containing product possesses the Green Rust two (GR2)-like crystal structure with an approximate chemical composition of [Zn_0.435·Fe^II_0.094·Fe^III_0.470·(OH)₂]·(SO₄²⁻)_0.235·1.0H₂O, while the DBS-containing one exhibits the common LDH compound-like structure. The contact angle measurement indicates the evident hydrophobic properties of DBS-containing nanocomposite, compared with SO₄²⁻-containing product, due to the modification of the internal and external surface of LDHs by the organic hydrophobic chain of DBS.     

Development of Electroflotation Technology for Extraction of Anionic Surfactants and Nonferrous Metal Ions from Wastewater Produced at Electroplating Industries

Sorption extraction of anionic surfactants NaDDS and NaDBS on freshly formed iron(III) and aluminum(III) hydroxides and on a highly dispersed activated carbon of OU-B brand was experimentally studied. It was shown that NaDDS is the most fully sorbed on Al(OH)₃ and OU-B, whereas on Fe(OH)₃, the maximum sorption is observed for NaDBS. The electroflotation extraction of anionic surfactants and poorly soluble iron(III) and aluminum(III) hydroxides was examined and the influence exerted by the following factors (pH, nature of electrolyte, surfactant concentration) on the degree of extraction of these substances was analyzed. In addition, electroflotation extraction of OU-B in the presence on nonferrous metal hydroxides and surfactants of varied nature from aqueous solutions was performed. The results obtained were used to develop a technological scheme for electroflotation of complex-composition wastewater.