Effect of medium composition on the monooxygenase activity of immobilized hemin in aniline oxidation

The effect of the composition of the reaction medium on the rate of aniline oxidation to p-aminophenol by hydrogen peroxide on hemin immobilized on -propylimidazole-modified silica has been studied. Organic solvent additives (alcohols, esters and nitriles) are shown to increase the reaction rate. The observed effect is attributed to the decrease of the medium dielectric constant.

---

- , , --. , (, , ) . .

     

Synthesis of novel acidic ionic liquid immobilized on silica

A novel acidic ionic liquid immobilized on silica has been synthesized by hydrolyzing tetraethyl orthosilicate (TEOS) and the acidic ionic liquid derived from (3-aminopropyl) trimethoxysilane. The catalytic activities were evaluated in the acetalization and biodiesel synthesis. The results showed that the solid acid was a very efficient catalyst for the traditional acid-catalyzed reactions with the yield over 99.0%. A novel solid acid combined both the high activities inherent to the acidic ionic liquid and the feasibility of separation of the solid catalysts. High acidity, enhanced catalytic activities and improved stability were the key properties of the novel solid acid.     

Heats and kinetics of oxidation of small copper particles in copper-containing catalysts

The r.t. interaction of oxygen with finely-divided copper in Cu/ZnO catalysts has been studied by gas-solid microcalorimetry. The oxidation is accompanied by the presence of a pseudo-equilibrium pressure, which increases as the reaction proceeds. Surface and several subsurface layers are involved, but a metallic core is always left. The heat of reaction is the same for all samples and does not vary with the extent of reaction (ΔH=181 kJ mol (1/20₂)^?1). The rate of reaction depends upon the pressure, and decreases dramatically to a point where oxidation stps and molecular oxygen is weakly chemisorbed. The overall process is interpreted by assuming that the rate-determining step is the surface dissociation of a molecular precursor onto Cu atoms.     

Aerobic selective oxidation of alcohols to aldehydes or ketones catalyzed by ionic liquid immobilized TEMPO under solvent-free conditions

A selective ionic-liquid immobilized TEMPO/CuCl catalyzed oxidation procedure of alcohols to the corresponding aldehydes and ketones with molecular oxygen under solvent-free conditions was developed. The catalyst was easily recovered and reused in the reaction. Correspondence: Yun-Yang Wei, School of Chemical Engineering, Nanjing University of Science and Technology, 210094 Nanjing, P.R. China.     

Miniemulsion polymerization of methyl methacrylate with dodecyl mercaptan as cosurfactant

Miniemulsions of methyl methacrylate with sodium lauryl sulfate as the surfactant and dodecyl mercaptan (DDM) as the cosurfactant (or hydrophobe) were prepared and polymerized. The emulsions were of a droplet size range common to miniemulsions and exhibited long-term stability (greater than 3 months). Results indicate that DDM retards Ostwald ripening and allows the production of stable miniemulsions. When these emulsions were initiated, particle formation occurred predominantly by monomer droplet nucleation. The effects of the concentration of surfactant, cosurfactant and initiator were determined. Rates of polymerization, monomer droplet sizes, polymer particle sizes, molecular weights of the polymer, and the effect of initiator concentration on the number of particles vary systematically in ways that indicate predominant droplet nucleation in these systems. © 1996 John Wiley & Sons, Inc.     

Modulating properties of aqueous sodium dodecyl sulfate by adding hydrophobic ionic liquid

Altering and modifying important physicochemical properties of aqueous surfactant solutions is highly desirable as far as potential applications of such systems are concerned. Changes in the properties of aqueous solutions of a common anionic surfactant sodium dodecyl sulfate (SDS) are assessed in the presence of a common and popular 'hydrophobic' ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF(6)). Upon addition of up to approximately 0.10 wt% bmimPF(6), a dramatic decrease in critical micelle concentration (cmc) is accompanied by an increase in the degree of counterion dissociation (alpha) and micellar aggregation number (N(agg)) indicating micellar growth. However, in the range 0.10 wt% < or = bmimPF(6) 2.00 wt%, relatively gradual decrease in alpha and N(agg) is observed along with no change in cmc. Significantly decreased microfluidity of the aqueous SDS solutions on addition of bmimPF(6) is indicated by a fluorescence microviscosity probe 1,3-bis-(1-pyrenyl)propane which suggests partitioning of bmimPF(6) into the SDS micellar phase. Behavior of solvatochromic fluorescence probes, pyrene, pyrene-1-carboxaldehyde, and 2-(p-toluidino)naphthalene-6-sulfonate, confirms interaction, and possible complexation, between IL bmimPF(6) and anionic micellar surface. Increased solubility of bmimPF(6) with increasing SDS concentration further confirms SDS-bmimPF(6) interactions. Presence of strong electrostatic attraction between bmim(+) and anionic micellar surface is proposed to be the most dominant reason for these observations. All-in-all, unique role of a hydrophobic ionic liquid bmimPF(6) in modifying the properties of aqueous anionic sodium dodecyl sulfate is demonstrated.     

Effect of isopropyl alcohol on the granulometric and chemical composition of ultradispersed copper-containing powders

Possibility of obtaining nanodispersed copper-containing powders by electrochemical cathodic deposition from aqueous and water-isopropanol solutions of copper dichloride was examined.     

Effect of ionic liquid BMImBr on palladium-catalyzed oxidation of ethylene with LiNO3

Oxidative bromination of ethylene was found to proceed effectively in the presence of a catalytic system Pd(OAc)₂–LiNO₃ in two-component BMImBr–HOAc and three-component BMImBr–HOAc–H₂O solvents. At a large content of BMImBr, conversion of ethylene was found to yield 1,2-dibromoethane with a selectivity over 95%. The composition of the Pd(OAc)₂–LiNO₃ solutions was followed during the reaction of ethylene by means of UV–Vis spectroscopy.     

离子液体水合物反应液表面张力的研究

表面张力是衡量水合物动力学促进剂促进效果的主要参数,为了探究离子液体应用于水合物生成促进的可行性,实验合成了具有表面活性功能的离子液体[HMIPS]DBSA、[MIMPS]DBSA、[PIPS]DBSA和[PYPS]DBSA,并分别测定了在不同浓度及温度条件下的表面张力。结果表明:四种离子液体的最低表面张力相较于纯水均降低了一半以上,其中[MIMPS]DBSA的降幅最小;各离子液体的表面张力随着浓度的升高而降低并达到一定值,其中[MIMPS]DBSA的CMC浓度为700 ppm左右,其余三种离子液体的CMC浓度则均在900 ppm以上;此外,各离子液体的表面张力随着温度的升高而逐渐降低,但相较于浓度对其的影响,降幅要小得多。这说明浓度是影响水合物反应液表面张力的主要控制因素。可以发现所合成的离子液体与当前最好的促进剂SDS相比,有待于进一步优化。但离子液体的高度可设计性及生物可降解性给水合物促进剂的研发提供了广阔的发展空间,具有很好的发展前景。     

Copper complex immobilized on imidazolium supported ionic liquid for ultrasound promoted ester synthesis

1-glycyl-3-methyl imidazolium chloride-copper (II) complex [[Gmim]Cl-Cu (II)] was found to be a heterogeneous catalyst for an efficient and greener solvent free synthesis of esters by condensation of carboxylic acids and alcohols with excellent yield with high turnover number (8.3 × 10² to 9.5 × 10²) using ultrasound irradiation. In addition, this method features reusability of catalyst, reduced waste, thus making new protocol more environmentally suitable whilst no catalyst leaching was observed.     

Effect of ionic strength and ionic interactions on the oxidation of Fe(II)

The rates of oxidation of Fe(II) in NaCl and NaClO ₄ solutions were studied as a function of pH (6 to 9), temperature (5 to 25°C), and ionic strength (0 to 6m). The rates are second order with respect to [H⁺] or [OH^–] and independent of ionic strength and temperature. The overall rate of the oxidation is given by

Effect of ionic liquid on crystallization kinetics and crystal form transition of poly(vinylidene fluoride) blends

Journal of Thermal Analysis and Calorimetry - Semicrystalline poly(vinylidene fluoride) (PVDF) incorporated with ionic liquids(IL) exhibits applicability as electrolyte. In this paper,...     

Base-free oxidation of thiols to disulfides using selenium ionic liquid

We present here the results on the use of 1-n-butyl-3-methylimidazolium methylselenite, [bmim][SeO₂(OCH₃)], in the synthesis of symmetrical disulfides starting from thiols. This efficient and improved method is general for aromatic, aliphatic, and functionalized thiols affording the disulfides in good to excellent yields after easy work up. The use of a microwave accelerates the reaction and the [bmim][SeO₂(OCH₃)] was reused for further oxidation reactions.     

Effect of the nature of support and Cu precursor on the activity of copper-containing catalysts in CO oxidation

We have studied the catalytic activity of supported copper-containing catalysts based on ZSM-5, Al₂O₃, and SiO₂ in oxidation of CO. We have established that the difference between the activities of systems with 1.8% copper content obtained from different precursors is determined by the different reducibilities of their active sites, the number of such sites, and the distribution of the metal ions. The fact that the activity is highest for 1.8% Cu-ZSM-5 obtained from copper acetate is due to the relatively higher number of associated Cu²⁺ cations in square planar coordination in a non-lattice oxygen environment, which have high reducibility, and the higher overall oxygen content O_ads + O_OH in the surface layer of the catalyst.     

Low temperature oxidation of isobutene on heterogeneous photoimmobilized copper-containing catalysts

A new photoimmobilization method to synthesize heterogeneous metal complex catalysts for low temperature oxidation of isobutene to methacrolein is suggested. The process selectivity is 100%.

---

- -- . - 100%.

     

New nitrite ionic liquid (IL-ONO) and nanoparticles of organosilane-based nitrite ionic liquid immobilized on silica as nitrosonium sources for electrophilic aromatic nitrosation

An improved method for the synthesis of nitrosoarenes has been developed using a new nitrite ionic liquid (IL-ONO) and immobilized nitrite ionic liquid. These ionic liquids play as nitrosonium sources for electrophilic aromatic nitrosation of active aromatics at 0-5 °C. Their action was accomplished in water and the satisfactory results were obtained under the mild conditions in short reaction time.     

Influence of the ionic liquid/gas surface on ionic liquid chemistry

Applications such as gas storage, gas separation, NP synthesis and supported ionic liquid phase catalysis depend upon the interaction of different species with the ionic liquid/gas surface. Consequently, these applications cannot proceed to the full extent of their potential without a profound understanding of the surface structure and properties. As a whole, this perspective contains more questions than answers, which demonstrates the current state of the field. Throughout this perspective, crucial questions are posed and a roadmap is proposed to answer these questions. A critical analysis is made of the field of ionic liquid/gas surface structure and properties, and a number of design rules are mined. The effects of ionic additives on the ionic liquid/gas surface structure are presented. A possible driving force for surface formation is discussed that has, to the best of my knowledge, not been postulated in the literature to date. This driving force suggests that for systems composed solely of ions, the rules for surface formation of dilute electrolytes do not apply. The interaction of neutral additives with the ionic liquid/gas surface is discussed. Particular attention is focussed upon H(2)O and CO(2), vital additives for many applications of ionic liquids. Correlations between ionic liquid/gas surface structure and properties, ionic liquid surfaces plus additives, and ionic liquid applications are given.     

Concentration-dependent dual behavior of hydrophilic ionic liquid in changing properties of aqueous sodium dodecyl sulfate

Modifying physicochemical properties of aqueous surfactant solutions in favorable fashion by addition of environmentally benign room-temperature ionic liquids (ILs) has enormous future potential. Due to its unusual properties, an IL may demonstrate a unique role in altering the properties of aqueous surfactant solutions. Changes in the properties of aqueous sodium dodecyl sulfate (SDS), an anionic surfactant, upon addition of a common and popular "hydrophilic" ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4] are presented. Addition of low concentrations of [bmim][BF4] (i.e., 相似文献   

Thermochemistry and kinetics of the reaction of methyl mercaptan with iodine

The gas-phase reaction CH₃SH + I₂ has been studied spectrophotometrically over the temperature range of 476–604 K. It was found that the reaction undergoes H abstraction by I at ≤575 K, leading to the formation of MeSI and followed by a secondary reaction which leads to the formation of MeSSMe: Taking into consideration the effect of reaction (2), the equilibrium constant K₁ (554 K) has been evaluated to be 0.025 ± 0.004. This value was combined with the estimated values S (CH₃SI, g) = 73.7 ± 1.0 eu and 〈ΔC〉 = 0.87 ± 0.3 eu to obtain ΔH = 4.03 ± 0.73 kcal/mol. This yields ΔH (CH₃SI, g) = 7.16 ± 0.73 kcal/mol when combined with known thermochemical values for CH₃SH, HI, and I₂. A kinetic study was vitiated by the concurrent heterogeneous reaction of MeSH and I₂ at lower temperatures and the rather complicated chemistry occurring at elevated temperatures. However, attempts at measuring rate constants at 554 K lead to a lower limit of ΔH (CH₃S·, g) ≥ 29.5 ± 2 kcal/mol when an estimated value of A = 10^{10.8 ± 0.2} L/mol·s for the reactionc is used. DH (CH₃S–I) is estimated to be 49.3 ± 1.7 kcal/mol. The bond strengths of some divalent sulfurs and the reaction mechanisms are discussed. A crude estimate of DH⁰(H–CH₂SH) = 96 ± 1 kcal has been obtained from the kinetic data.     

Effect of oxygen pressure on the oxidation kinetics of unstabilised polypropylene

The thermal oxidation of unstabilised polypropylene films at 80 °C and various oxygen pressures ranging from 0.02 MPa to 5 MPa has been studied by FTIR spectrophotometry (carbonyl growth). The induction time decreases and the maximum oxidation rate increases quasi-hyperbolically when the oxygen pressure increases. The asymptotic behaviour (corresponding to the regime of oxygen excess) is not reached at the highest pressure under study. A kinetic model derived from a classical mechanistic scheme but free of simplifying hypotheses, has been used to simulate the observed behaviour and to determine the elementary rate constants. It is shown that a good simulation of kinetic curves of carbonyl build-up in the whole pressure interval under study can be obtained with a set of physically reasonable rate constant values. The “inverse problem” cannot be, however, totally solved because certain constants are interdependent so that some rate constant values have to be arbitrarily chosen or taken from the literature.