The coating of smart pH‐responsive polyelectrolyte brushes in capillary and its application in CE

A novel pH‐responsive coating technique was developed and applied to CE successfully in this paper. The coating was formed by bonding mixed opposite charge poly(acrylic acid) and poly(2‐vinylpyridine) randomly onto the inner wall of a silica capillary. The coating processes were first characterized by ellipsometry and atomic force microscopy at macroscale and microscale, respectively. Measurements of EOF were implemented to confirm the coating. Direction and velocity of EOF became controllable from negative to positive, showing a perfect sigmoidal curve as the coating net charges alternated by the pH of BGE. The control of the EOF makes it possible to analyze different kinds of small molecules, peptides, and proteins successfully in the same capillary. Results showed that the stability and reproducibility for separations of fluoroquinolone standards were satisfactory for more than a hundred separations. A series of basic and acidic protein standards were separated with admirable efficiency and minimal adsorption using both polarities. The separation of tryptic BSA digest showed that the prepared capillary has immense potential in analyzing a single sample with both acidic and basic separations, which achieved the expectation in proteomics study by CE‐MS.     

Formation of surface-attached microstructured polyelectrolyte brushes

Surface-attached micropattemed polyelectrolyte brushes on planar solid surfaces are generated using free radical polymerization photo-initiated by self-assembled initiator monolayers. It is shown that the formed patterns can be either negative or positive with different patterning processes.     

Entropic death of nonpatterned and nanopatterned polyelectrolyte brushes

The stability of nonpatterned and nanopatterned strong polyelectrolyte brushes (PEBs) is studied as a function of both brush character and the properties of a contacting liquid. High‐molecular‐weight PEBs of poly(4‐methyl vinylpyridinium iodide) (PMeVP) are synthesized using surface‐initiated radical‐chain polymerization. Nanopatterned brushes (NPBs) line with pattern sizes ranging from 50 to 200 nm are generated by patterning the initiator layer using deep‐ultraviolet photolithography followed by brush growth initiated from the patterned layer. Homogeneous PEBs with different degrees of charging and grafting densities are exposed to water and salt solutions with different temperatures for different periods. The degradation is monitored through dry‐state ellipsometry and atomic force microscopy measurements. Enhanced degrafting for more strongly swollen polymer brushes can be observed in agreement with an “entropic spring” model. Based on the results of the nonpatterned brushes, the NPBs are exposed to water at different temperatures and external salt content for varying periods of time. Counterintuitively, the NPBs show increased degrafting for smaller patterns, which is attributed to different polymer chain dynamics for nanobrushes and microbrushes. We investigate the influence of thermodynamic and kinetic parameters on the stability of (nanopatterned) PEBs and discuss the role of entanglements and formation of complexes in such films. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1283–1295     

Polyzwitterionic brushes: Extreme lubrication by design

Polymers offer the advantage that they may independently combine desirable supramolecular structure with useful local monomeric properties to yield optimal performance of different tasks. Here we utilise the remarkable lubricating properties both of dense polymer brushes, and of hydration sheaths about charges via the emerging paradigm of hydration lubrication, to design a grafted-from polyzwitterionic brush system, where each of the monomers has a structure similar to the highly-hydrated phosphorylcholine headgroups of phosphatidylcholine lipids. Such polyzwitterions are grown from a macroinitiator coating the substrate (mica) surface using atom transfer radical polymerisation (ATRP) of 2-(methacryloyloxy)ethyl phosphorylcholine (MPC) to form exceptionally robust poly(MPC) brushes. We have characterized these brush layers via X-ray reflectometry, X-ray photoelectron spectroscopy, surface forces measurements and atomic force microscopy. Such brushes, designed to optimise their lubrication properties, are indeed found to provide state of the art boundary lubrication, achieving friction coefficients as low as 0.0004 at pressures up to 75 atmospheres over a wide range of sliding velocities. Such low friction is comparable with that of articular cartilage in healthy mammalian joints, which represents nature’s benchmark for boundary lubrication in living organisms, and suggests that hydration lubrication plays a major role in reducing friction in biological systems.     

Interaction of dissolved proteins with spherical polyelectrolyte brushes

We consider the adsorption of bovine serum albumin (BSA) on spherical polyelectrolyte brushes (SPB). The SPB consist of a solid polystyrene core of 100nm diameter onto which linear polyelectrolyte chains (poly(acrylic acid), (PAA)) are grafted. The adsorption of BSA is studied at a pH of 6.1 at different concentrations of added salt and buffer (MES). We observe strong adsorption of BSA onto the SPB despite the effect that the particles as well as the dissolved BSA are charged negatively. The adsorption of BSA is strongest at low salt concentration and decreases drastically with increasing amounts of added salt. The adsorbed protein can be washed out again by raising the ionic strength. The various driving forces for the adsorption are discussed. It is demonstrated that the main driving force is located in the electrostatic interaction of the protein with the brush layer of the particles. All data show that the SPB present a new class of carrier particles whose interaction with proteins can be tuned in a well-defined manner.     

Enrichment and distribution of counterions in spherical polyelectrolyte brushes probed by SAXS

The spatial correlation of counterions [Li⁺, Na⁺, Rb⁺, Cs⁺, NH₄⁺, (CH₃)₄N⁺] with spherical polyelectrolyte brushes (SPBs), which consist of a PS core and chemically grafted PSS chains, was comprehensively studied through a combination of SAXS, DLS, and Zeta potential. Results show that the SAXS intensity profiles of the brush appears to be “insensitive” to the concentration of Na⁺. By contrast, introducing salt ions with a density lower than sodium [NH₄⁺, (CH₃)₄N⁺ and Li⁺] into the brush layer will cause a decrease in the scattering intensity while introducing those with a higher density than sodium (Rb⁺ and Cs⁺) will cause the opposite result. As verified by the combined results of SAXS, DLS, and Zeta potential, the collapse of the brush and the enrichment of the counterions in the brush layer occur simultaneously. It was further demonstrated that the concentration of counterions enriched in the innermost layer of the brush shell can be enhanced up to hundreds of times compared with the bulk concentration, and the counterion distribution in SPB shell follows a radial attenuation distribution. SAXS is confirmed to be powerful in probing the enrichment and distribution of counterions within SPB. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 738–747     

Synthesis of thermo- and pH-sensitive polyelectrolyte brushes by combining thermo-controlled emulsion polymerization and photo-emulsion polymerization

Bifunctional spherical polyelectrolyte brushes(SPBs)with tunable thermo-and pH-sensitivity are synthesized by combining thermo-controlled emulsion polymerization and photo-emulsion polymerization.They consist of a spherical polystyrene core and a shell of mixed brushes of poly(N-isopropylacrylamide)(PNIPAM)and poly(acrylic acid)(PAA) whose composition can be easily modulated by the dose of monomers.The kinetics of SPB synthesis as well as their size change with temperature and pH is determined by dynamic light scattering(DLS).The scanning electron microscopy(SEM) images show that the bifunctional SPBs have a defined spherical morphology with a narrow size distribution.     

The effect of shear flow on the conformation of polyelectrolyte brushes

The behavior of flat polyelectrolyte brushes under the action of a lateral force or flow was studied. Special attention was focused on the case when a lateral force acts on a brush that occurs near the point of phase transition from the swollen state to the collapsed state. The difference between phase transitions in a brush induced by isotropic and anisotropic interactions is analyzed. As examples of such transitions, the collapse of a polyelectrolyte brush upon cooling and the nematic collapse of an anisotropic brush are considered. It was shown that lateral force (flow), exerting a marked effect on the nematic collapse of an anisotropic brush, has no practical effect on the collapse of a brush with isotropic interactions.     

Selective uptake of different proteins by annealed and quenched cationic spherical polyelectrolyte brushes

The selective uptake of bovine serum albumin (BSA) and β-glucosidase (β-G) by annealed and quenched cationic spherical polyelectrolyte brushes (SPB) was systematically studied by combining turbidimetric titration, dynamic light scattering and small angle X-ray scattering (SAXS). These two kinds of SPB consist of a same polystyrene core and a dense shell of poly (2-aminoethyl methacrylate hydrochloride) (PAEMH) and poly [2-(methacryloyloxy) ethyl] trimethylammonium chloride (PMAETA), respectively. Results reveal that the adsorption/desorption of proteins on SPB can be easily controlled by changing external conditions (pH and ionic strength). For a particular annealed or quenched SPB, there is a significant difference of the interaction pH regions between the brush and the two proteins, and this difference can be tuned by ionic strength. At low ionic strength, quenched brushes were more suitable for selective adsorption of BSA and β-G, while annealed brushes performed better at high ionic strength. SAXS analysis demonstrated that volume exclusion effect played a remarkable role in protein uptake by both SPB, and larger proteins were more likely to be adsorbed on the outer layer of the brush. The unique core-shell structure and controllable chain types make SPB an excellent candidate in selective adsorption/separation of proteins of different sizes.     

Normal and frictional forces between surfaces bearing polyelectrolyte brushes

Normal and shear forces were measured as a function of surface separation, D, between hydrophobized mica surfaces bearing layers of a hydrophobic-polyelectrolytic diblock copolymer, poly(methyl methacrylate)- block-poly(sodium sulfonated glycidyl methacrylate) copolymer (PMMA- b-PSGMA). The copolymers were attached to each hydrophobized surface by their hydrophobic PMMA moieties with the nonadsorbing polyelectrolytic PSGMA tails extending into the aqueous medium to form a polyelectrolyte brush. Following overnight incubation in 10 (-4) w/v aqueous solution of the copolymer, the strong hydrophobic attraction between the hydrophobized mica surfaces across water was replaced by strongly repulsive normal forces between them. These were attributed to the osmotic repulsion arising from the confined counterions at long-range, together with steric repulsion between the compressed brush layers at shorter range. The corresponding shear forces on sliding the surfaces were extremely low and below our detection limit (+/-20-30 nN), even when compressed down to a volume fraction close to unity. On further compression, very weak shear forces (130 +/- 30 nN) were measured due to the increase in the effective viscous drag experienced by the compressed, sliding layers. At separations corresponding to pressures of a few atmospheres, the shearing motion led to abrupt removal of most of the chains out of the gap, and the surfaces jumped into adhesive contact. The extremely low frictional forces between the charged brushes (prior to their removal) is attributed to the exceptional resistance to mutual interpenetration displayed by the compressed, counterion-swollen brushes, together with the fluidity of the hydration layers surrounding the charged, rubbing polymer segments.     

Forces between interfaces in concentrated nanoparticle suspensions and polyelectrolyte solutions

This article provides an overview of interactions between charged interfaces across concentrated suspensions of charged nanoparticles or solutions of polyelectrolytes. These systems bear many similarities. We distinguish the like-charged and oppositely charged situations. In the like-charged situation, a layered structure in the proximity of the interface is formed. This structure induces a strongly repulsive energy profile at shorter distances, which originates from a gap that is free of nanoparticles or polyelectrolytes. At larger distances, the profile becomes oscillatory. This energy profile can be quantified with a simple model, which distinguishes the near-field region and the far-field region. The parameters entering the model show characteristic scaling relations. In the oppositely charged situation, a saturated, tightly bound layer at the interface forms. This layer leads to a charge reversal of the interface and induces a similar layered structure as in the like-charged case.     

Controlled synthesis of hydrophilic concentrated polymer brushes and their friction/lubrication properties in aqueous solutions

Polymer brushes of water‐soluble polymers, poly(2‐hydroxyethyl acrylate) (PHEA) and poly(poly(oxyethyleneglycol)methylether acrylate) (PPEGA), were synthesized on a silicon wafer and a silica particle by applying photo‐induced organotellurium‐mediated radical polymerization to surface‐initiated graft polymerization. High graft densities were obtained, corresponding to reduced graft densities of about 0.32 and 0.42 for the PHEA and PPEGA brushes, respectively. These values were high enough to be categorized in the regime of “concentrated” polymer brushes (CPBs). Atomic force microscopic (AFM) study revealed that the CPB of PPEGA was allowed to be highly swollen in water but the CPB of PHEA did not. This means that water is reasonably good for PPEGA but not for PHEA. The AFM microtribological study between swollen brushes revealed two lubrication regimes, namely, boundary‐ and hydrodynamic‐lubrication regimes, with different shear‐velocity dependencies. Reflecting insufficient quality of water as a solvent, the CPB of PHEA showed adhesive interaction and thereby a higher frictional coefficient μ in the boundary lubrication. More interestingly, super lubrication was achieved for the CPB of PPEGA with a μ value in the order of 10^?4 in water and in 0.1 M aqueous NaCl solution (without the help of electrostatic repulsion). Super lubrication was concluded to be a characteristic feature of the CPB, even in an aqueous system. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Adsorption of polyelectrolyte multilayers and complexes on silica and cellulose surfaces studied by QCM-D

The adsorption of polyelectrolyte (PE) multilayers and complexes, obtained from both high- and low-charge polyelectrolytes, was studied on silica and on cellulose model surfaces by quartz crystal microbalance with dissipation (QCM-D). The film properties acquired with the different strategies were compared. When polyelectrolytes were added on an oppositely charged surface in sequence to form multilayers both the change in frequency and dissipation increased. The changes in frequency and dissipation were clearly higher if low-charge PEs were used in the multilayer formation. The substrate, silica or cellulose, did not affect the adsorption behaviour of low-charge PEs and only minor differences were seen in the adsorbed amounts and changes in dissipation of high-charge PEs between SiO₂ and cellulose. The complexes formed by low-charge PEs had higher changes in frequency and dissipation at low ionic strength on both surfaces, while the complexes formed from high-charge polyelectrolytes adsorbed more at high salt concentration. The complexes of low-charge polyelectrolytes adsorbed more on silica, while the complexes formed by high-charge PEs formed thicker layers on cellulose. The charge ratio had a significant effect on the adsorption and the highest changes in frequency and dissipation were obtained in the anionic/cationic charge ratio of 0.5–0.6. Generally, the multilayers and complexes formed by low-charge polyacrylamides adsorbed highly and formed rather thick layers on both surfaces, unlike the high-charge PEs which formed thin layers using either one of the addition techniques.     

Effect of temperature on the frictional forces between polystyrene brushes

Normal and shear forces between opposing polystyrene (PS) brushes made from preferentially assembled PS–polyvinylpyridine diblock copolymers were measured in toluene and in near‐theta cyclohexane at 32, 40, and 50 °C, using a modified surface forces apparatus. In cyclohexane, over the temperature window probed, the normal forces of interaction are repulsive and the range of those force profiles changes only slightly; however, for both of the PS brushes studied, the onset of shear forces in near‐theta cyclohexane is strongly influenced by changes in temperature: As the temperature is increased, the onset of the frictional interactions between the brushes in cyclohexane shifts to smaller distances, approaching the distances where frictional forces are observed for brushes in the good solvent toluene. The pattern of behavior seen in the frictional response between the limits of good and theta condition is attributed to composition fluctuations, which increase near the theta condition because of the decrease in excluded volume interactions. These fluctuations may give rise to increased drag during shearing motion because of interfacial roughness or interchain coupling across the brush–brush interface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 649–655, 2006     

Theory of the observed ultralow friction between sliding polyelectrolyte brushes

It is shown using a method based on a modified version of the mean field theory of Miklavic and Marcelja [J. Phys. Chem. 92, 6718 (1988)] that it should be possible for osmotic pressure due to the counterions associated with the two polyelectrolyte polymer brush coated surfaces to support a reasonable load (i.e., about 10(6) Pa) with the brushes held sufficiently far apart to prevent entanglement of polymers belonging to the two brushes, thus avoiding what is believed to be the dominant mechanisms for static and dry friction.     

Salt-regulated attraction and repulsion of spherical polyelectrolyte brushes towards polyelectrolyte multilayers

Adsorption of colloidal particles presents an interesting alternative to the modification of surfaces using covalent coupling or physisorption of molecules. However, to tailor the properties of these materials full control over the effective particle-substrate interactions is required. We present a systematic investigation of the adsorption of spherical polyelectrolyte brushes (SPB) onto polyelectrolyte multilayers (PEM). A brush layer grafted from colloidal particles allows the incorporation of various functional moieties as well as the precise adjustment of their adsorption behaviour. In the presence of oppositely charged surfaces the amount of adsorbed SPB monotonically increases with the ionic strength, whereas equally charged substrates efficiently prevent colloidal attachment below a threshold salt concentration. We found that the transition from the osmotic to the salted brush regime at approximately 100 mM coincided with a complete loss of substrate selectivity. In this regime of high ionic strength, attractive secondary interactions become dominant over electrosteric repulsion. Due to the soft polyelectrolyte corona a surface coverage exceeding the theoretical jamming limit could be realized. Both the adsorption kinetics and the resulting thin film morphologies are discussed. Our study opens avenues for the production of two-dimensional arrays and three-dimensional multilayered structures of SPB particles.     

Controllable immobilization of proteins in quenched spherical polyelectrolyte brushes as observed by fluorescence spectroscopy and small angle X-ray scattering

The immobilization of lysozymes (pI = 11) onto anionic spherical polyelectrolyte brushes (SPB) which consist of a solid polystyrene core and a densely grafted poly(styrene sulfonate) (PSS) shell was systematically studied by fluorescence spectroscopy and small angle X-ray scattering. Results show that the capture of lysozyme by PSS brush is a dynamic process, which involves a quick agglomeration stage and a slow rearrangement one. And lysozyme inclines to immobilize in the inner layer of the brush, and saturation of lysozyme adsorption onto the SPB is gradually reached as the protein concentration increases, proceeding from the inside to the outside of the brush layers. As increasing the pH and ionic strength, the lysozyme previously adsorbed will be partially released and migrate from the inner to the outer layer of SPB. Last competitive adsorption tests between lysozyme and BSA or β-glucosidase were performed, indicating that besides electrostatic interaction counterion release force also plays an important role in protein adsorption. SPB was proved to be ideal candidate for controllable immobilization of protein, which can be extended into various applications, such as drug delivery and protein separation. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1577–1588     

Novel polyelectrolyte complexes between N-carboxyethylchitosan and synthetic polyelectrolytes

Novel polyelectrolyte complexes (PEC) between the polyampholyte N-carboxyethylchitosan (CECh) and polyacid or polybase have been prepared. The complex formation between CECh and poly(2-acryloylamido-2-methylpropanesulfonic acid) (PAMPS), poly(acrylic acid) (PAA) or poly(ethylene imine) (PEI) has been studied. The complex CECh/PAMPS is formed in the pH range from 1.2 to 6.0. The complex CECh/PAA is formed in the range 4.8-6.0 and CECh/PEI—from pH 5.4 to 7.0. The stoichiometry of the complexes depends on the pH value of the medium. In case of CECh/PAMPS and CECh/PAA the maximum quantity of complex is formed in excess of CECh and in the case of CECh/PEI—in excess of PEI. It has been shown that PEC formation between CECh and PAMPS improves the haemocompatibility of CECh.