Enhanced luminescence of Dy in Y3Al5O12 by Bi co-doping

In the present paper, phosphors with the composition Y_3−x−yAl₅O₁₂:Bi³⁺_x, Dy³⁺_y were synthesized with solid state reactions. The luminescence properties of Bi³⁺ and Dy³⁺ in Y₃Al₅O₁₂(YAG) and the energy transfer from Bi³⁺ to Dy³⁺ were investigated in detail. Bi³⁺ in YAG emits one broad band peaking at 304 nm which can be ascribed to the transition from excited states ³P_{0, 1} to ground state ¹S₀. Dy³⁺ in YAG emits two groups of peaks around 484 and 583 nm, respectively, which can be ascribed to the transitions from excited state ⁴F_9/2 to ground states ⁶H_15/2 and ⁶H_13/2. The co-doping of Bi³⁺ enhances the luminescent intensity of Dy³⁺ by ∼7 times because Bi³⁺ can transfer the absorbed energy to Dy³⁺ efficiently. The mechanism of energy transfer was also discussed.     

Energy transfer and luminescent properties of Ce, Cr co-doped Y3Al5O12

The phosphors in the system Y_3−xAl_5-yO₁₂:xCe³⁺,yCr³⁺ were synthesized by solid-state reactions and their photoluminescence properties were investigated. These phosphors have absorption in the visible light region and give luminescence in the far-red region (∼688 nm), which are suitable for the application in the device of luminescent solar concentrator (LSC). In these phosphors, Ce³⁺ located at Y³⁺ site can effectively transfer its absorbed energy to Cr³⁺ at Al³⁺ site.     

Oxide coatings on Y3Al5O12:Tb particles

A coating method with precipitating process was developed to reduce the particle size and to improve the particle dispersion of Y₃Al₅O₁₂:Tb³⁺ phosphor prepared by sol-gel method. The particle morphology was observed by using SEM and TEM; and the particle size and its dispersion was measured by using laser scattering technique. Several coating materials were tested. Among them, Al₂(SiO₃)₃ coating not only reduced the particle size from several micrometers to ∼1 μm and improved the particle dispersion, but also well kept luminescent intensities and improved the duration of the phosphor under the bombardment of cathode ray. The mechanism of the particle size reduction was proposed.     

Optical properties of superhard BC5: First-principles calculations

BC₅ is a newly synthesized superhard material. We present a systematic investigation of optical properties of BC₅ in P3m1 and I-4m2 phases at ambient and high pressure in the framework of density functional theory with the generalized gradient approximation (GGA) in this paper. Optical properties such as dielectric function, refractive index, absorption, reflectivity and electron energy-loss spectrum are obtained successfully. The feature in the spectra of the optical parameters is discussed. Through calculation, we find BC₅ is optically anisotropic. Moreover, the dielectric function exhibits a large change at 70 GPa pressure for P3m1 BC₅ phase, but I-4m2 phase not, indicating the stable electronic structure that the I-4m2 phase possesses.     

First-principles calculations of elasticity and thermodynamic properties of LaNi5 crystal under pressure

This paper investigates the equilibrium lattice parameters, heat capacity, thermal expansion coefficient, bulk modulus and its pressure derivative of LaNi 5 crystal by using the first-principles plane-wave pseudopotential method in the GGA-PBE generalized gradient approximation as well as the quasi-harmonic Debye model. The dependences of bulk modulus on temperature and on pressure are investigated. For the first time it analyses the relationships between bulk modulus B and temperature T up to 1000 K, the relationship between bulk modulus B and pressure at different temperatures are worked out. The pressure dependences of heat capacity C v and thermal expansion α at various temperatures are also analysed. Finally, the Debye temperatures of LaNi 5 at different pressures are successfully obtained. The calculated results are in excellent agreement with the experimental data.     

超声喷雾共沉淀法制备的Lu3Al5O12∶Eu3+ 纳米粉体发光特性

采用新型超声喷雾共沉淀法技术,以Lu₂O₃、Eu₂O₃、Al(NO₃)₃·9H₂O为原料,制备了不同浓度Eu³⁺离子掺杂的Lu₃Al₅O₁₂纳米粉体.用X射线粉末衍射表征了获得纳米粉体的相,用扫描电镜观察了纳米粒子的形貌.测定了粉体的激发光谱、⁷F₀-⁵D₂声子边带谱与发射光谱.研究了不同高温烧结温度与Eu³⁺掺杂浓度对纳米粒子的发光强度与粒子形貌的影响规律.研究表明,当烧结温度高于900 ℃时,粉体发光强度明显增强,并且随着煅烧温度的增加,发光强度有所增强.Eu³⁺离子的最佳掺杂浓度为5~7 mol%.根据稀土离子Eu³⁺光学跃起矩阵元的特点,从发射光谱获得Eu³⁺光学跃起的J-O参量Ω₂与Ω₄.在Eu³⁺掺杂浓度均为5 mol%时,其强度参量达最小,电-声子耦合最强.然后随着掺杂浓度的进一步提高,强度参量略有增加,电-声子耦合减弱.说明Eu-O键强增加,共价性增强,Eu³⁺的局域环境对称性降低.Ω₂值低于Eu³⁺在玻璃与晶体基质中的情况,这是由于纳米粒子中存在着大量的缺陷以及晶体的结构畸变导致纳米粒子的对称性下降所致.     

First principles studies of elastic and thermodynamic properties of fcc-VH2 with pressure and temperature

In this work, we study elastic and thermodynamic properties of VH₂ at different pressures and temperatures. Elastic constants and bulk modulus of VH₂ decrease with increase in temperature, and hence increase with pressure. Thermal expansion of the crystal lattice will be suppressed by high pressure. When the temperature is 1500 K, 15.99 GPa of pressure can completely restrain the volume expansion caused by temperature. At a given pressure, the lower the temperature, the easier the cell compression. At low temperatures, C_v is proportional to T³, and C_v tends to the Dulong-Petit limit at higher temperatures. The Debye temperature increases with pressure, but decreases with temperature. At low temperature and low pressure, thermal expansion coefficient increases sharply with temperature. At high temperature and high pressure, the increasing trend slows down.     

First-principles calculations on structural, elastic, electronic, optical and thermal properties of CsPbCl3 perovskite

The structural, elastic, electronic, optical and thermal properties of the semiconductor perovskite CsPbCl₃ were investigated using the pseudo-potential plane wave (PP-PW) scheme in the frame of generalized gradient approximation (GGA) and local density approximation (LDA). The computed lattice constant agrees reasonably with experimental and theoretical ones. The CsPbCl₃ crystal behaves as ductile material. The valence bands are separated from the conduction bands by a direct band gap R-R. We distinguished hybridization between Pb-p states and Cl-p states in the valence bonding region. Under compression at P=30 GPa, this material will have a metallic character. The thermal effect on the lattice constant, bulk modulus, Debye temperature and heat capacity C_V was predicted using the quasi-harmonic Debye model. To the author's knowledge, most of the studied properties are reported for the first time.     

BC5力学性质的第一性原理计算

采用平面波赝势密度泛函理论方法对0—60 GPa静水压下BC₅ 六角晶系P3m1和四方晶系I4m2结构的平衡态晶格常数、弹性常数、各向异性以及泊松比与Cauchy扰动进行了研究. 研究结果表明, BC₅的两种结构在高压下是稳定的, 且不可压缩性随着压强的增加而增大. 另外, 对其电子结构也进行了计算, 计算结果表明, BC₅存在一个较宽的带隙, 两种原子间有较强的共价杂化, 材料的性质主要由B的2p¹和C的2p²态电子共同决定. 压强对材料带隙和费米能级附近的态密度几乎没有影响, 只引起微小的漂移, 可推断其很好的高压稳定性.     

The structure and luminescence properties of a novel orange emitting phosphor Y3MnxAl5−2xSixO12

A series of phosphors with the composition Y₃Mn_xAl_5−2xSi_xO₁₂ (x=0, 0.05, 0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6) was prepared through solid state reactions. X-ray powder diffraction analysis of samples shows that when co-doping content does not exceed 16% of Al³⁺, equimolar co-doping of Mn²⁺ and Si⁴⁺ does not change the garnet structure of phosphors, but makes the interplanar distance to decrease a certain extent. However, if the co-doping content exceeds 16%, new phases will form in the samples. The excitation and emission spectra of samples show that Mn²⁺ in Y₃Mn_xAl_5−2xSi_xO₁₂ emits broadband orange light (peak wavelength varies from 586 to 593 nm). With an increment in co-doping content, the emission intensity of the phosphors increases when the value of x is lower than 0.1 while it decreases when it is higher than 0.1 and the emission peak moves to a longer wavelength.     

The structure and luminescence properties of long afterglow phosphor Y3−xMnxAl5−xSixO12

A series of phosphors with the composition Y_3−xMn_xAl_5−xSi_xO₁₂ (x=0, 0.025, 0.050, 0.075, 0.150, 0.225, 0.300) were prepared with solid state reactions. The X-ray powder diffraction analysis of samples shows that the substitution of Mn²⁺ and Si⁴⁺ does not change the garnet structure of phosphors, but makes the interplanar distance decrease to a certain extent. The emission spectra show that Mn²⁺ in Y₃Al₅O₁₂ emits yellow-orange light in a broad band. With the increment of substitution content, the emission intensity of the phosphors increases firstly then decreases subsequently, and the emission peak moves to longer wavelength. Afterglow spectra and decay curves show that all the Mn²⁺ and Si⁴⁺ co-doped samples emit yellow-orange light with long afterglow after the irradiation of ultraviolet light. The longest afterglow time is 18 min. Thermoluminescence measurement shows that there exist two kinds of traps with different depth of energy level and their depth decreases with the increment of substitution content.     

First-principles calculations for elastic and electronic properties of ZnSnO3 under pressure

The LiNbO₃ (LN)-type structure and the ilmenite (IL)-type structure of ZnSnO₃ are investigated with the ultrasoft pseudopotential scheme in the frame of the local density approximation (LDA). The calculated lattice parameters of ZnSnO₃ under zero pressure and zero temperature are in very good agreement with the existing experimental data. The pressure dependences of the elastic constants, Debye temperatures, Poisson's ratio, sound velocity, mechanical stability and mechanical anisotropy of the LN-type structure of ZnSnO₃ have also been investigated. We find that the LN-type structure of ZnSnO₃ is a mechanically stable phase under pressures up to 21 GPa; however, the mechanical anisotropy weakens with the increasing pressures. In addition, the calculated band structure indicates that LN-ZnSnO₃ has a direct band gap of 1.669 eV, and the total and partial densities of states, under diverse pressures of the LN-type structure ZnSnO₃ have also been obtained.     

Synthesis and characterization of monodisperse spherical core-shell structured SiO2@Y3Al5O12:Ce3+/Tb3+ phosphors for field emission displays

Nanocrystalline Y₃Al₅O₁₂: Ce³⁺/Tb³⁺ (average crystalline size 30 nm) phosphor layers were coated on non-aggregated, monodisperse and spherical SiO₂ particles by the sol-gel method, resulting in the formation of core-shell structured SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ particles. X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, photoluminescence, cathodoluminescence spectra, as well as lifetimes were utilized to characterize the core-shell structured SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ phosphor particles. The obtained core-shell structured phosphors consist of well-dispersed submicron spherical particles with a narrow size distribution. The thickness of the Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ shells on the SiO₂ cores (average size about 500 nm, crystalline size about 30 nm) could be easily tailored by varying the number of deposition cycles (100 nm for four deposition cycles). Under the excitation of ultraviolet and low-voltage electron beams (1–3 kV), the core-shell SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ particles show strong yellow-green and green emission corresponding to the 5d–4f emission of Ce³⁺ and ⁵D₄–⁷F _J (J = 6, 5, 4, 3) emission of Tb³⁺, respectively. These phosphors may have potential application in field emission displays.     

Cr3+掺杂的Cd3Al2Ge3O12光谱特性及晶场参数计算

采用高温固相法合成了Cd₃Al₂Ge₃O₁₂：Cr³⁺多晶材料,利用X射线衍射对其结构进行了分析,通过Cr³⁺的室温吸收光谱、室温和77K发射光谱分别对其光谱特性和晶场参数进行了分析和计算.结果表明：在450 nm的蓝光激发下,Cd₃Al₂Ge₃O₁₂：Cr³⁺室温发 关键词： 3Al₂Ge₃O₁₂：Cr³⁺')" href="#">Cd₃Al₂Ge₃O₁₂：Cr³⁺ 荧光光谱 晶场参数 可调谐激光     

The up-conversion properties of Yb and Er doped Y4Al2O9 phosphors

Er³⁺ doped and Yb³⁺/Er³⁺ co-doped Y₄Al₂O₉ phosphors are prepared by the sol-gel method. The effect of dopant concentration on the structure and up-conversion properties is investigated by X-ray diffraction (XRD) and photoluminescence, respectively. XRD pattern indicates that the sample structure belongs to monoclinic. Under 980 nm excitation, the green and red up-conversion emissions are observed and the emission intensities depended on the Yb³⁺ ion concentration. The green up-conversion emissions decrease with the increase of Yb³⁺ concentration, while red emission increases as Yb³⁺ concentration increases from 0 to 8 at% and then decreases at high Yb³⁺ concentration. The mechanisms of the up-conversion emissions are discussed and results shows that in Er³⁺ and Yb³⁺/Er³⁺ co-doped system, cross-relaxation (CR) and energy transfer (ET) processes play an important role for the green and red up-conversion emissions.     

Study on dielectric and magnetic properties of Ho3Fe5O12 ceramics

Ho₃Fe₅O₁₂ ceramics with garnet structure were prepared by the solid-state reaction method. The results revealed the existence of Fe²⁺ ions have intensive influence on dielectric and magnetic properties of Ho₃Fe₅O₁₂ ceramics, which could be further confirmed by oxygen treatment. With a magnetic field lower than 10 kOe, the ME coefficient reaches 33 ps m⁻¹ at room temperature. And the ME coupling was further verified by dielectric anomaly near Néel temperature.     

Influence of Lu2O3 on electrical and microstructural properties of CaCu3Ti4O12 ceramics

In this work, the influence of Lu₂O₃ doped on the dielectric and electrical properties of CaCu₃Ti₄O₁₂ was reported. Lu₂O₃-doped CCTO was prepared by a conventional solid state technique using CuO, TiO₂, and CaCO₃ as starting materials. The samples were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM); dielectric measurements were measured in the 10² Hz–10⁷ Hz frequency range at room temperature; and the nonlinear behavior of all samples was measured. The doping of Lu₂O₃ resulted in an increase in the dielectric constant of CCTO, but decreased the stability of the frequency dependence. Increasing concentrations of Lu₂O₃ resulted in decreasing nonlinear coefficients.     

Luminescent properties of green- or red-emitting Eu-doped Sr3Al2O6 for LED

Eu²⁺-doped Sr₃Al₂O₆ (Sr_3−xEu_xAl₂O₆) was synthesized by a solid-state reaction under either H₂ and N₂ atmosphere or CO atmosphere. When H₂ was used as the reducing agent, the phosphor exhibited green emission under near UV excitation, while CO was used as the reducing agent, the phosphor mainly showed red emission under blue light excitation. Both emissions belong to the d-f transition of Eu²⁺ ion. The relationship between the emission wavelengths and the occupation of Eu²⁺ at different crystallographic sites was studied. The preferential substitution of Eu²⁺ into different Sr²⁺ cites at different reaction periods and the substitution rates under different atmospheres were discussed. Finally, green-emitting and red-emitting LEDs were fabricated by coating the phosphor onto near UV- or blue-emitting InGaN chips.     

Unified calculations of the optical and electron paramagnetic resonance spectral data for Ce ion in Y3Ga5O12 crystal

Seven crystal field energy levels (obtained from the optical spectra) and three g factors g_x, g_y and g_z (obtained from electron paramagnetic resonance (EPR) spectra) for Ce³⁺ ion in Y₃Ga₅O₁₂ crystal are calculated together by diagonalizing a complete energy matrix. The Hamiltonian of this energy matrix includes all the interactions for 4f¹ ion Ce³⁺ in rhombic crystal field and under an external magnetic field, and so the optical and EPR data can be studied in a unified way. The calculated crystal field energy levels are in better agreement with the experimental values than the calculated values in the previous paper, and the g factors (which have not been calculated previously) are explained reasonably. The results are discussed.     

纯Cr2O3包覆Li4Ti5O12微球的制备及其储锂性能研究

The pure Cr₂O₃ coated Li₄Ti₅O₁₂ microspheres were prepared by a facile and cheap solutionbased method with basic chromium(III) nitrate solution (pH=11.9). And their Li-storage properties were investigated as anode materials for lithium rechargeable batteries. The pure Cr₂O₃ works as an adhesive interface to strengthen the connections between Li₄Ti₅O₁₂ particles, providing more electric conduction channels, and reduce the inter-particle resistance. Moreover, LixCr₂O₃, formed by the lithiation of Cr₂O₃, can further stabilize Li₇Ti₅O₁₂ with high electric conductivity on the surface of particles. While in the acid chromium solution (pH=3.2) modification, besides Cr₂O₃, Li₂CrO₄ and TiO₂ phases were also found in the final product. Li₂CrO₄ is toxic and the presence of TiO₂ is not welcome to improve the electrochemical performance of Li₄Ti₅O₁₂ microspheres. The reversible capacity of 1% Cr₂O₃-coated sample with the basic chromium solution modification was 180 mAh/g at 0.1 C, and 134 mAh/g at 10 C. Moreover, it was even as high as 127 mAh/g at 5 C after 600 cycles. At-20℃, its reversible specific capacity was still as high as 118 mAh/g.