MgF2单晶的THz光谱研究

利用THz时域光谱技术对MgF₂晶体(样品1)和MgF₂：Co晶体(样品2)在0.5—2.5 THz的吸收特性进行了研究.在0.5—2.5 THz波段，样品1吸收系数α(ν)随频率ν增加而增大，最大值为24 cm^-1.样品2的吸收系数比样品1大得多，Co掺杂使晶格吸收带边向低频移动，而且样品2在1.9 THz有吸收峰，吸收系数达到70 cm^-1，由此求出F^--Co²⁺离子键伸缩振动的键力常数K为3.40×10^-2　N/cm.这一结果表明，THz光谱分析有可能成为研究晶体化学键的一种重要手段.利用光学常数之间的关系计算了两个样品在0.5—2.5 THz的介电函数的实部ε₁(ν)，得到样品1的ε₁(ν)值在4.67至4.73之间，样品2的ε₁(ν)值在4.62至5.01之间. 关键词： THz辐射 光谱 2晶体')" href="#">MgF₂晶体     

Investigation of tetragonal ReN2 and WN2 with high shear moduli from first-principles calculations

Two new transition metal dinitrides, ReN₂ and WN₂, with the P4/mmm structure are investigated by the first-principles calculations. The computed shear moduli of 327 GPa for ReN₂ and 334 GPa for WN₂ exceed those of all transition metal dinitrides previously reported. The estimated theoretical hardness are 46.3 GPa for ReN₂ and 47.9 GPa for WN₂, respectively. The calculated high shear moduli and hardness indicate that they are potential ultrahard materials. It is important to note that the computed hardness of the weakest bond are 34.7 GPa (W-N) for WN₂ and 33.1 GPa (Re-N) for ReN₂, much higher than that of 21.1 GPa (Re-B) for ReB₂, which suggests that tetragonal ReN₂ and WN₂ are probably harder than ReB₂. The total and partial electron density of states and the electron localization function for ReN₂ and WN₂ are analyzed. We attribute the high bulk modulus, shear modulus, and hardness to a three-dimensional covalently bonded framework in tetragonal ReN₂ and WN₂. Our calculations show that tetragonal ReN₂ is expected to be synthesized above 62.7 GPa and tetragonal WN₂ may be hard to be synthesized.     

Molecular dynamic study of the melting temperature in MgF2 with the fluorite structure

The melting temperature of MgF₂ with cubic fluorite structure has been calculated by the constant temperature and pressure molecular dynamics (MD) simulation using the well-tested effective pair-wise potentials, which consist of the Coulomb, dispersion, and repulsion interaction by varying temperature from 300 to 2500 K. It is found that the potential parameters for MgF₂ derived from ab initio periodic Hartree-Fock calculations are very successful in reproducing accurately the DFT-GGA combined with quasi-harmonic Debye model calculated volumes of the cubic fluorite-type MgF₂ over a wide range of temperature at room pressure. Our simulated melting temperature of cubic fluorite-type MgF₂ is very close to the actual melting temperature 1539 K. Meanwhile, the radial distribution functions of Mg-Mg, F-F, and Mg-F ion pairs near the melting temperature are investigated from the isobaric and isothermal ensemble.     

Effect of deposition method on the optical and microstructural properties of vacuum-deposited MgF2 thin films

The optical and structural properties of magnesium fluoride films deposited by conventional e-beam evaporation and sputtering have been investigated herein. Deposition processes were carried out on the glass substrates in the absence of any reactive gases. The results show that the deposition method has a considerable effect on the optical and microstructural properties MgF₂ film. Also, the results show that the deposition parameters of the sputtered MgF₂ films can be easily controlled to yield the desired layer. The optical, chemical, and structural properties of the deposited MgF₂ films were characterized by using spectrophotometer, X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy, and atomic force microscopy.     

Development of a cw Co : MgF2 laser

The results obtained in the development of a cryogenic cw Co : MgF₂ laser, realized at the Dipartimento di Fisica of the Università di Pisa are presented. The laser can be tuned continuously in the range between 1.6 and 2.1 μm, with a typical output power of 1–2 W. A preliminary application to the spectroscopy of a Tm : YLF doped crystal is reported by using a photoacoustic apparatus.     

Pressure derivatives of isothermal bulk modulus of rare gas solids

In the present study we have derived the expression for the bulk modulus using the Hildebrand approximation and the lattice potential energy for rare gas solids (RGS). The derived relation is further used to derive the expression for first and second order pressure derivatives of the bulk modulus for RGS. The derived relations are also used to compute the values of these constants in the case of Ne, Ar, Kr and Xe which are compared with the available values.     

CO2 laser assisted removal of UO2 and ThO2 particulates from metal surface

Pulsed laser assisted removal of uranium dioxide and thorium dioxide particulates from stainless steel surface have been studied using a TEA CO₂ laser. Decontamination efficiency is measured as a function of laser fluence and number of pulses. Threshold fluence for the removal of UO₂ particulates has been found to be lower than that required for the removal ThO₂ particulates. Usage of a ZnSe substrate, that is transparent to the laser wavelength used here, enabled us to decouple the cleaning effect arising out of absorption in the particulates from that in the substrate and has contributed towards understanding the mechanism responsible for cleaning. The experimental observations are also corroborated by simple theoretical calculations.     

XPS investigation of diffusion of two-layer ZrO2/SiO2 and SiO2/ZrO2 sol–gel films

Two-layer ZrO₂/SiO₂ and SiO₂/ZrO₂ films were deposited on K9 glass substrates by sol–gel dip coating method. X-ray photoelectron spectroscopy (XPS) technique was used to investigate the diffusion of ZrO₂/SiO₂ and SiO₂/ZrO₂ films. To explain the difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films, porous ratio and surface morphology of monolayer SiO₂ and ZrO₂ films were analyzed by using ellipsometry and atomic force microscopy (AFM). We found that for the ZrO₂/SiO₂ films there was a diffusion layer with a certain thickness and the atomic concentrations of Si and Zr changed rapidly; for the SiO₂/ZrO₂ films, the atomic concentrations of Si and Zr changed relatively slowly, and the ZrO₂ layer had diffused through the entire SiO₂ layer. The difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films was influenced by the microstructure of SiO₂ and ZrO₂.     

Co掺杂MgF2电子结构和光学特性的第一性原理研究

基于密度泛函理论（DFT）的第一性原理平面波超软赝势方法,计算了Co掺杂MgF₂晶体的几何结构、电子结构和光学性质.结果表明,Co掺杂导致MgF₂晶体结构畸变,可能发生一种类四方和斜方型结构相变.由于Co原子的加入,体系的禁带宽度减小,可观察到半导体—金属性转变.计算也表明,Co掺杂对静态介电常数和光吸收系数有重要调制作用,所得结果与最近实验测量很好相符,揭示了Co:MgF₂体系在光学元器件方面的潜在应用. 关键词： 密度泛函理论（DFT） 第一性原理 超软赝势 2')" href="#">Co掺杂MgF₂     

Vibrational and dielectric properties of La2Hf2O7 : Experiment and theory

The physical origin of the static dielectric constant and its relationship with lattice dynamics of La₂Hf₂O₇are studied by combining infrared spectroscopy and density functional perturbation theory (DFPT). Both La and Hf show obvious effective charge anomaly which is attributed to the hybridization between 2p states of the oxygen and 5d states of the cations, indicating a mixed covalent-ionic bonding between the cations and the oxygen. The dielectric response is determined by seven infrared phonon modes and the static dielectric constant extracted from infrared reflection spectrum is in close agreement with DFPT calculation. Both experiment and theory reveal that most of the contributions to the static dielectric constant are dominated by three infrared phonon modes at 137, 172 and 297 cm⁻¹. Two of them (172 and 297 cm⁻¹) are from the displacements of oxygen atoms inside HfO₆ octahedra and the other one (137 cm⁻¹) is from the bending of La₂O′ chain. This result indicates that the origin of the static dielectric constant of La₂Hf₂O₇ is directly connected with the two interpenetrating sub-networks of pyrochlore structure (HfO₆ octahedra and La₂O′ chain).     

High pressure behaviour of GaCMn3

Results of X-ray powder diffraction measurements up to 35 GPa carried out on GaCMn₃ are presented. GaCMn₃ does not undergo any structural transition in this pressure region. However, the pressure–volume data can be fitted to two straight line segments in the pressure regions; one from 0 to 5 GPa and another from 5 to 30 GPa respectively.     

Preparation and luminescent properties of cubic Eu:Y2O3 nanocrystals and comparison to bulk Eu:Y2O3

Y₂O₃:Eu³⁺ nanocrystals were prepared by combustion synthesis. The particle size estimated by X-ray powder diffraction (XRD) was about 10 nm. A blue-shift of the charge-transfer (CT) band in excitation spectra was observed in Y₂O₃:Eu³⁺ nanocrystals compared with bulk Y₂O₃:Eu³⁺. The electronic structure of Y₂O₃ is calculated by density functional method and exchange and correlation have been treated by the generalized gradient approximation (GGA) within the scheme due to Perdew-Burke-Ernzerhof (PBE). The calculated results show that the energy centroid of 5d orbital in nanocrystal has increasing trend compared with that in the bulk material. The bond length and bond covalency are calculated by chemical bond theory. The bond lengths of Y₂O₃:Eu³⁺ nanocrystal are shorter than those of the bulk counterpart and the bond covalency of Y₂O₃:Eu³⁺ nanocrystal also has an increasing trend. By combining centroid shift and crystal-field splitting, the blue-shift of the CT band is interpreted.     

Pressure dependence of electronic structure and magnetic properties in Fe16N2

The electronic structures and magnetic properties of Fe₁₆N₂ system and their pressure dependence were investigated by using first-principles calculations based on the density functional theory. It has been found that the total magnetic moment in Fe₁₆N₂ system decreases monotonically as increasing pressure from 0 to 14.6 GPa. A phase transition from ferromagnetic (FM) to non-magnetic (NM) occurs with a volume collapse of around 0.008  at 14.6 GPa, The lattice constants a and c for magnetic results decrease monotonically as pressure increasing from 0 to 14.6 GPa, at 14.6 GPa, the lattice constant a decreases sharply, on the contrary, the lattice constant c increases abruptly. We think that the change of microscopic structure of Fe₁₆N₂ is responsible for the phase transition from FM to NM.     

First-principles study of electrical structures and optical properties of Ag or Au doped MgF2 crystal

The geometric structure, electronic and optical properties of MgF₂ crystal mixed with Ag, Au are obtained by adopting the first-principles calculation of plane wave ultra-soft pseudo-potential technology based upon the density function theory (DFT). The calculation results show that the doping of Ag and Au diminishes of the MgF₂ system and the occurrence of half-metallic properties with a greater influence of Au than Ag. In addition, the refractive index and absorption coefficient of the MgF₂ system are enhanced because of the doping. The modulation action on the refractive index of MgF₂ indicates potential application of the forbidden bandwidth doping in optical devices.     

Structural, electronic and thermodynamic properties of cubic Zn3N2 under high pressure from first-principles calculations

The structural, electronic and thermodynamic properties of cubic Zn₃N₂ under hydrostatic pressure up to 80 GPa are investigated using the local density approximation method with pseudopotentials of the ab initio norm-conserving full separable Troullier-Martin scheme in the frame of density functional theory. The structural parameters obtained at ambient pressure are in agreement with experimental data and other theoretical results. The change of bond lengths of two different types of Zn-N bond with pressure suggests that the tetrahedral Zn-N bond is slightly less compressible than the octahedral bond. By fitting the calculated band gap, the first and second order pressure coefficients for the direct band gap ofthe Zn₃N₂ were determined to be 1.18×10⁻² eV/GPa and −2.4×10⁻⁴ eV/(GPa)², respectively. Based on the Mulliken population analysis, Zn₃N₂ was found to have a higher covalent character with increasing pressure. As temperature increases, heat capacity, enthalpy, product of temperature and entropy increase, whereas the Debye temperature and free energy decrease. The present study leads to a better understanding of how Zn₃N₂ materials respond to compression.     

Structural, elastic, electronic and magnetic properties of ThCr2Si2 from first-principles calculations

The tetragonal (s.g. I4/mmm; #139) ThCr₂Si₂ is widely known as a structural type of the broad family of the so-called 122-like ternary phases which includes now more than 800 members. Among them the superconducting iron-pnictides (discovered in 2008, -earth metals) and the newest superconducting iron-chalcogenides (discovered in 2010, metals) have attracted recently enormous interest in this class of materials. Meanwhile, the data about the electronic, magnetic, and elastic properties of the ThCr₂Si₂ phase itself are still practically absent. Here, by means of first-principles calculations, the optimized structural parameters, spin ordering of the magnetic ground state, independent elastic constants, bulk, shear, and Young’s moduli, elastic anisotropy indexes, total and partial densities of states, and inter-atomic bonding picture for ThCr₂Si₂ were obtained for the first time and analyzed in comparison with the aforementioned most popular 122-like systems and .     

Ab initio study of phase stability,thermodynamic and elastic properties of C3N2 derived from cubic C20

In this work, we report a quite different conclusion from Tian et al. [Phys. Rev. B 78 (2008) 235431]. It is proved that β-C₃N₂ is the only phase under high pressure, and α-C₃N₂ does not exist. β-C₃N₂ is a covalent crystal composed of strong CC and CN covalent bonds. Band gap of β-C₃N₂ increases with pressure. The width of antibonding state, shown in partial density of states (PDOS), keeps about 5 eV with rising pressures, which brings stable CN or CC covalent bonds. At sufficiently low temperatures, heat capacity (C_v) is proportional to T³; and at intermediate temperatures, C_v is governed by the details of vibrations of the atoms; finally, C_v reaches to β-C₃N₂'s Dulong–Pettit limit (about 120 J/mol K). Though thermal expansion coefficient (α) increases with temperature, α is less than 1×10⁻⁵ K⁻¹. Elastic constants rise with pressure, but shear moduli is quite steady which increases just a little with pressures.     

Stability of La2O3 and GeO2 passivated Ge surfaces during ALD of ZrO2 high-k dielectric

La₂O₃ grown by atomic layer deposition (ALD) and thermally grown GeO₂ are used to establish effective electrical surface passivations on n-type (1 0 0)-Ge substrates for high-k ZrO₂ dielectrics, grown by ALD at 250 °C substrate temperature. The electrical characterization of MOS capacitors indicates an impact of the Ge-surface passivation on the interfacial trap density and the frequency dependent capacitance in the inversion regime. Lower interface trap densities can be obtained for GeO₂ based passivation even though a chemical decomposition of the oxidation states occur during the ALD of ZrO₂. As a consequence the formation of a ZrGeO_x compound inside the ZrO₂ matrix and a decline of the interfacial GeO₂ are observed. The La₂O₃ passivation provides a stable amorphous lanthanum germanate phase at the Ge interface but also traces of Zr germanate are indicated by X-ray-Photoelectron-Spectroscopy and Transmission-Electron-Microscopy.     

Optical properties of Mn-activated Na2SnF6 and Cs2SnF6 red phosphors

Alkaline hexafluorostantanate red phosphors Na₂SnF₆:Mn⁴⁺ and Cs₂SnF₆:Mn⁴⁺ are synthesized by chemical reaction in HF/NaMnO₄ (CsMnO₄)/H₂O₂/H₂O mixed solutions immersed with tin metal. X-ray diffraction patterns suggest that the synthesized phosphors have a tetragonal symmetry with the space group D_4h¹⁴ (Na₂SnF₆:Mn⁴⁺) and a trigonal symmetry with the space group D_3d³ (Cs₂SnF₆:Mn⁴⁺). Photoluminescence (PL) analysis, PL excitation (PLE) spectroscopy, and the Raman scattering techniques are used to investigate the optical properties of the phosphors. The Franck-Condon analysis of the PLE data yields the Mn⁴⁺-related optical transitions to occur at ∼2.39 and ∼2.38 eV (⁴A_2g→⁴T_2g) and at ∼2.83 and ∼2.76 eV (⁴A_2g→⁴T_1g) for Na₂SnF₆:Mn⁴⁺ and Cs₂SnF₆:Mn⁴⁺, respectively. The crystal field parameters (Dq) of the Mn⁴⁺ ions in the Na₂SnF₆ and Cs₂SnF₆ hosts are determined to be ∼1930 and ∼1920 cm⁻¹, respectively. Temperature-dependent PL measurements are performed from 20 to 440 K in steps of 10 K, and the obtained results are interpreted by taking into account the Bose-Einstein occupation factor. Comprehensive discussion is given on the phosphorescent properties of a family of Mn⁴⁺-activated alkaline hexafluoride salts.     

Dielectric properties of barium titanate ceramics modified by SiO2 and by BaO-SiO2

The influence of SiO₂ on the dielectric properties of barium titanate ceramics was investigated. SiO₂ had been doped solely and together with BaO into barium titanate before calcination. X-ray diffraction showed that all the ceramics were of a pure perovskite phase after sintering at 1275 °C for 2 h. For SiO₂-doping, there was about 2.5 °C increase in Curie temperature per molar percentage of doping and the leakage current was obviously increased, especially at low voltages for relatively high doping levels. While for the co-doping of SiO₂ and BaO, there was little change in Curie temperature. The point defects formed through the dopings were proposed responsible for the effects. It was suggested that SiO₂ is important to barium titanate ceramics not only for sintering but also for modifying their properties.