Additive pulse mode-locked Nd: YAG laser

Additive pulse mode locking applied to lamppumped Nd: YAG lasers results in an attractive source of picosecond pulses at 1.06 m or 1.32 m with average powers at the Watt level. We provide detailed information on construction and operation and give data on performance. A modified active stabilization scheme allows not only improved stability of operation but also insight into the dynamics of pulse formation.     

Nonlinear mirror operation of a diode-pumped quasi-cw picosecond Nd:YAG laser

Received: 10 July 1997/Revised version: 23 September 1997     

Liquid-cooled ceramic Nd:YAG split-disk amplifier for high-average-power laser

A liquid-cooled ceramic Nd:YAG split-disk laser amplifier has been designed for a high-average-power laser system. The maximum average output power of 17.1 W (1.71 J at 10 Hz) and the beam size of far-field pattern with 1.5 times diffraction limit was obtained. The combination of liquid cooling for disk laser material and wavefront compensation with a phase conjugation mirror was demonstrated. The wavefront degradation by liquid cooling was observed and measured with Michelson interferometer and far-field patterns.     

Passive mode locking of a ruby laser using a birefringent crystal and a fractional-commensurate cavity length

Mode-locked operation has been observed in a Q-switched, ruby laser using a quartz crystal as the passvie mode-locking element and a laser cavity length which is a whole fraction of that which is commensurate in mode-frequency spacing with the lowfrequency stimulated Brillouin scattering (lf S BS) in the crystal element. In addition, high-bit-rate operation has been observed, suggesting that the passive modulation of the lf S BS process is sufficiently strong to maintain a fixed-phase relation between several neighboring oscillating modes of the laser.     

Efficient all-solid-state tunable source based on a passively Q-switched high-power Nd:YAG laser

Received: 27 May 1997/Revised version: 20 June 1997     

Design of a self-injected unstable cavity Nd: YAG Laser

A detailed analysis of a self-injected Nd: YAG laser with an unstable cavity is presented. With respect to the normal Q-switched laser-mode operation the pulse peak power is increased by a factor of eight with a pulse length of about 1 ns. Moreover single transverse mode operation is achieved, with divergence near the diffraction limit. An evaluation of the most significant parameters useful for the design of an unstable resonator for self-injection applications is also presented.     

Intracavity frequency-tripling of actively mode-locked diode-pumped Nd:YAG laser

We report the first diode-pumped solid-state laser operating in cw-mode-locked regime and simultaneously achieving intracavity frequency-tripling. This laser provide UV picosecond pulses (λ=355 nm) of 10 ps duration with 0.5 mW average power at 150 MHz repetition rate. A different set of adjustments gave rise to a Q-switched mode-locked regime. Trains of hundred UV pulses of 60 ps duration and 4 W peak power were produced in this latter case at 50 kHz repetition rate. Received: 12 October 1998 / Revised version: 12 December 1998 / Published online: 26 May 1999     

43 W picosecond laser and second-harmonic generation experiment

Combining the advantages of diode-end-pumped Nd: YVO₄ and diode-side-pumped Nd: YAG amplifiers, a high average power and high beam quality picosecond laser is designed. The system delivers a picosecond laser with average power of 43.4 W and good beam quality of M² < 1.7. By focusing the high power picosecond laser in LBO crystal, 532 nm green laser with maximal power of 20.8 W is generated and the conversion efficiency of second-harmonic generation reaches 56.4% when 17.7 W green laser obtained from the fundamental frequency laser with power of 31.4 W and beam quality of M² < 1.25.     

Enhanced drilling using a dual-pulse Nd:YAG laser

A new method for improving the efficiency of laser drilling has been developed. Two synchronized free-running laser pulses from a tandem-head Nd:YAG laser are capable of drilling through 1/8-in-thick stainless-steel targets at a stand-off distance of 1 m without gas-assist. The combination of a high-energy laser pulse for melting with a properly tailored high-intensity laser pulse for liquid expulsion results in the efficient drilling of metal targets. We argue that the improvement in drilling is due to the recoil pressure generated by rapid evaporation of the molten material by the second laser pulse. Received: 29 August 2000 / Accepted: 18 December 2000 / Published online: 3 April 2001     

Phase conjugation in a continuous-wave diode-pumped Nd:YVO4 laser

We demonstrate phase conjugation and dynamic holography by degenerate four-wave mixing in a continuous-wave diode-pumped Nd:YVO₄ laser for the first time. A phase-conjugate reflectivity of 1.4% is obtained with a 12 W diode power. The experimental results and the optimizing parameters, such as the cavity mirror reflectivities, are compared with results from a steady-state theoretical analysis. Received: 6 April 1999 / Published online: 24 June 1999     

Highly efficient Raman conversion in O2 pumped by a seeded narrow band second-harmonic Nd:YAG laser

The first-Stokes conversion efficiency for a stimulated Raman scattering (SRS) is usually very low in gaseous oxygen media. In 3.0 Mpa O₂, a single longitudinal mode second harmonic Nd:YAG laser pump source gives a typical vibrational first-Stokes conversion efficiency of only 2.5%, In comparison, the accompanying stimulated Brillouin scattering (SBS) attains a reflectivity of 67%. However, by seeding an OPO beam into the Raman cavity, the first-Stokes photon conversion efficiency now attains a peak value of 54%, while the SBS reflectivity reduces to 5% in a 6.1 Mpa 41:59 O₂/ He mixture. This 54% efficiency was obtained for a seeder laser pulse-width less than one half that of pump laser (6.8 ns). A first-Stokes peak power conversion efficiency as high as 88% has been obtained when the pump and seeder pulse peaks coincide. So, we may expect a higher first-Stokes photon conversion efficiency if the seeder pulse-width can be made equal to or larger than that of the pump pulse. On the other hand, the beam quality of the first-Stokes in an O₂/ He mixture excels that of the pump laser for a seeder energy of 5 mJ and pump energy of 50 mJ. However, at pump energies higher than 105 mJ and a pump laser repetition rate of 10 Hz, the thermal defocusing effect worsens the first-Stokes beam quality. This thermal defocusing effect is a result of the Raman heat release and could be eliminated by fast circulating and cooling the Raman gas medium.     

Highly efficient frequency doubling of high-energy Nd:YAG laser using a CsB3O5 crystal

We have demonstrated efficient frequency doubling of high-energy fundamental Nd:YAG laser pulse energy of the multi-joule (J) level at a high repetition rate using high optical-quality top-seeded solution growth CsB₃O₅(TSSG-CBO) crystal for the first time. Second-harmonic (532 nm) generation (SHG) output energy of 1.2 J at 10 Hz is obtained with a conversion efficiency of 60%. This result has been obtained at the multi-J level by the growth of high optical-quality TSSG-CBO crystal with the large effective nonlinear coefficient and high damage threshold. These results indicate that TSSG-CBO is a good candidate material for high-energy SHG of Nd-doped lasers at the several J level or more with high repetition rate.     

Generation of UV and VIS laser light by stimulated Raman scattering in H2, D2, and H2/He using a pulsed Nd:YAG laser at 355 nm

2 ), deuterium (D₂), and mixtures of hydrogen and helium (H₂/He), versus Raman gas pressure and input pump energy of the pulsed Nd:YAG laser at 355 nm, are reported. Photon conversion efficiencies of 50% and 27% are achieved at the first Stokes lines (S₁) in H₂ and D₂, respectively. As a result, ultraviolet and visible laser light (274–503 nm) was generated with energies ranging from a few mJ up to several tens of mJ. Received: 5 January 1998/Revised version: 3 June 1998     

Widely tunable optical parametric oscillator driven by a pulsed diode-pumped nonlinear-mirror mode-locked Nd:YAG laser

We report on the development of a pulsed diode end-pumped Nd:YAG laser mode-locked by a nonlinear mirror and stabilized by an acousto-optical modulator. With the introduction of appropriate intracavity loss, the laser is able to generate 22.8 ps pulses with the energy of 4.5 μJ. After amplification and frequency doubling stages, the second harmonic radiation is used to non-collinearly synchronously pump a β-barium borate optical parametric oscillator in a walk-off compensated scheme. The system demonstrates a wide-tuning range from 635 nm to 2.55 μm for the signal output, with maximum average conversion efficiency as high as 42%.     

High power continuous-wave diode-laser-pumped Nd:YAG laser

We report on a diode-laser-pumped cw Nd: YAG laser operating at a power level of 150 W. By using a transverse pump geometry, the radiation of 54 diode lasers with an output power of 10 W each is coupled into a Nd:YAG rod. In multimode operation, an optical slope efficiency of 32% and an optical to optical efficiency of 29% are obtained. In TEM₀₀ operation, an output power of more than 30 W is realized with an optical to optical efficiency of 10%.     

4-W and 23-ps pulses from a lamp-pumped Nd:YAG laser passively mode-locked by polarization switching in a KTP crystal

Passive mode-locking of a cw lamp-pumped Nd:YAG laser using nonlinear polarization switching in a type-II SHG crystal is reported. Light pulses with more than 5 W of average power and pulse duration shorter than 25 ps have been obtained at 1064 nm. Received: 29 January 1999 / Revised version: 24 March 1999 / Published online: 1 July 1999     

High energy and short pulses generation by Nd:yttrium aluminum garnet laser mode-locked using frequency-doubling nonlinear mirror

The generation of laser pulses with energies of >40 mJ at 25 Hz and durations variable from 15 ps to 45 ps using an Nd:yttrium aluminum garnet laser mode-locked with a Stankov nonlinear mirror is demonstrated. This laser is used to pump an optical parametric generator-amplifier, which is tunable in the visible spectral range.     

Performance of a Nd: YAG oscillator/ampflifier with phase-conjugation via stimulated Brillouin scattering

Phase conjugation via stimulated Brillouin scattering in CH₄ gas has been used to correct amplifier aberrations in a Nd: YAG oscillator/amplifier system. The single amplifier stage has been used in two-pass and four-pass arrangements. Using the four-pass arrangement incorporating compensation for thermal birefringence, a single-frequency diffraction-limited output of 350 mJ, in a compressed 6 ns pulse is achieved at 15 Hz repetition rate.     

Diode-pumped Nd:YAG laser using reflective pump optics

We have examined the performance of a diode-laser side-pumped Nd:YAG laser using elliptical mirrors to focus the output of 6 × 10 W laser-diode arrays into the Nd: YAG rod. The multimode cw output power was 14 W with an optical to optical efficiency of 29%. With a resonator designed for TEM₀₀ mode operation 12 W of output was achieved.     

Diode end-pumped high-efficiency Nd:YAG laser

A close-coupled scheme has been developed to end-pump the Nd:YAG rod using diode lasers tuned to 808 nm. By using a single diode laser, an optical-to-optical conversion efficiency of about 40% has been demonstrated in the multimode operation at 1064 nm.