High sensitivity dual core photonic crystal fiber sensor for simultaneous detection of two samples

The optical control ability of photonic crystal fiber (PCF) is a distinctive property suitable for improving sensing and plasma performance. This article proposes a dual-core D-channel PCF sensor that can detect two samples simultaneously, which effectively solves the problems of coating difficulty and low wavelength sensitivity. The PCF has four layers of air holes, which dramatically reduces the optical fiber loss and is more conducive to the application of sensors in actual production. In addition, by introducing dual cores on the upper and lower sides of the central air hole, reducing the spacing between the core and the gold nanolayer, a stronger evanescent field can be generated in the cladding air hole. The optical fiber sensor can detect the refractive index of two samples simultaneously with a maximum sensitivity of 21300 nm/RIU. To the best of our knowledge, the sensitivity achieved in this work is the highest sensitivity with the dual sample synchronous detection sensors. The detection range of the refraction index is 1.35-1.41, and the resolution of the sensor is 4.695×10^-6. Overall, the sensor will be suitable for medical detection, organic chemical sensing, analyte detection, and other fields.     

基于超连续谱的光子晶体光纤表面等离子体效应

 提出了利用光子晶体光纤空气孔塌缩技术制作光子晶体光纤表面等离子体共振传感器,构建了空气孔完全塌缩的光子晶体光纤表面等离子体共振传感器模型,并模拟计算了其中的表面等离子体共振效应。制作了全光纤化的波长检测型的光子晶体光纤表面等离子体共振传感器,利用超连续谱光源进行了相关实验。实验结果表明:以空气为待测环境介质时,对应的共振波长为465 nm,与理论计算相符合。     

Refractive index sensor based on high-order surface plasmon resonance in gold nanofilm coated photonic crystal fiber

We propose a novel kind of wide-range refractive index optical sensor based on photonic crystal fiber(PCF) covered with nano-ring gold film.The refractive index sensing performance of the PCF sensor is analyzed and simulated by the finite element method(FEM).The refractive index liquid is infiltrated into the cladding air hole of the PCF.By comparing the sensing performance of two kinds of photonic crystal fiber structures, a wide range and high sensitivity structure is optimized.The surface plasmon resonance(SPR) excitation material is chose as gold, and large gold nanorings are embedded around the first cladding air hole of the PCF.The higher order surface plasmon modes are generated in this designed optical fiber structure.The resonance coupling between the fundamental mode and the 5 th order surface plasmon polariton(SPP)modes is excited when the phase matching condition is matched.Therefore, the 3 rd loss peaks appear obvious red-shift with the increase of the analyte refractive index, which shows a remarkable polynomial fitting law.The fitnesses of two structures are 0.99 and 0.98, respectively.When the range of refractive indices is from 1.40 to 1.43, the two kinds of sensors have high linear sensitivities of 1604 nm/RIU and 3978 nm/RIU, respectively.     

PBG光子晶体光纤的色散特性研究

光子晶体光纤(PCF)是一种具有特殊包层结构的光纤,它是利用光子禁带效应(PBG)来导光的。利用时域有限差分法(FDTD)来分析光波在PCF中传输的色散特性,结果表明,PBG光子晶体光纤的色散值和色散斜率比常规的通信光纤要小。     

用阶跃有效折射率模型研究光子晶体光纤色散特性

在采用阶跃有效折射率模型研究光子晶体光纤的可行性方面，提出了将普通单模光纤、色散位移光纤、色散平坦光纤作为一定极限条件下的折射率引导型光子晶体光纤特例的观点.通过编程计算，并与文献报道的实验数据对比，表明应用本模型可以揭示光子晶体光纤所具有的奇异的色散机理.特别是应用本模型具有更快的计算速度.还用本模型分析了空气孔直径、周期及芯径对色散特性的影响. 关键词： 折射率引导型光子晶体光纤 阶跃有效折射率模型 色散     

光子晶体光纤产生飞秒超连续谱的实验研究

研究了飞秒脉冲经过光子晶体光纤时超连续谱产生的物理机制。采用输出波长可调谐的钛宝石光参量放大器作为泵浦源,光纤光谱仪测量不同泵浦功率和不同泵浦波长条件下光子晶体光纤产生的超连续谱的光谱图,对进行了归一化处理后的不同泵浦功率和不同泵浦波长条件下的超连续谱进行对比,分析影响光子晶体光纤超连续谱差异的物理机制。实验结果表明,当泵浦波长不变时,随着入射泵浦脉冲平均功率的增大,波峰增多,谱宽也逐渐加宽并伴随着出现能量向短波方向集中的现象,泵浦功率到达一定强度时,超连续谱的宽度最后到达饱和,谱的包络趋于稳定;入射光功率稳定在300 mW时,超连续谱的宽度和形状皆受到泵浦波长影响,在760～840 nm范围内,泵浦波长越长,波峰数越多,泵浦脉冲波长离零色散点越近,光子晶体光纤产生的超连续谱谱宽会越宽,超连续谱的形状相对越平坦。     

光子晶体光纤及在光纤光栅中的应用

从光子晶体光纤(PCF)与普通光纤在光纤结构上的差异出发，简要分析PCF的导光原理与单模特性，并探讨基于PCF的光纤光栅的稳定性，基于聚合物填充多孔光纤的长周期光纤光栅的温度调谐性能，以及纯结构性非光敏纤芯长周期光子晶体光纤光栅的原理。从一个方面说明了光子晶体光纤的潜在应用。     

基于空气孔微结构光纤的表面等离子体共振折射率传感器北大核心CSCD

提出了一种基于表面等离子体共振(SPR)效应增强的光子晶体光纤折射率传感器。该传感器结构通过光纤熔接机拼接光子晶体光纤(PCF),在光子晶体光纤中间引入一个空气孔形成PCF-空气孔-PCF的光纤传感结构,随后使用磁控溅射镀膜工艺在其表面沉积一层薄金膜制备而成。实验探究了折射率及温度对传感器的响应。结果表明,在1.333~1.389的折射率范围内,所提出的传感器的平均折射率灵敏度为2 142.52 nm,且测量线性度为0.981,品质因子约13.10。实验结果表明该传感器对温度不敏感。相比于无空气孔的PCF传感结构,引入的空气孔增强了SPR效应,使得传感器拥有良好的共振峰深度。得益于上述优势,该类型传感器有望在生物医学、环境监测等领域得到应用。     

High-temperature sensor using a Fabry-Perot interferometer based on solid-core photonic crystal fiber

A micro Fabry-Perot interferometer(M-FPI) is constructed by splicing a short section of polarizationmaintaining photonic crystal fiber(PM-PCF) to an end-cleaved single-mode fiber with controllable offset. Due to the high effective optical path difference induced by the solid core of the PCF,the M-FPI has an ultrasmall cavity of approximately 110μm.The temperature sensitivity within a range from 33℃to approximately 600℃is measured to be 13.8 pm/℃,which shows good agreement with the theoretical result.This proposed sensor has the advantages of ultracompact size and high stability.Therefore,it is suitable for various space-limited sensing applications in harsh environments.     

Design of diamond-shape photonic crystal fiber polarization filter based on surface plasma resonance effect

A novel plasmonic polarization filter based on the diamond-shape photonic crystal fiber(PCF) is proposed. The resonant coupling characteristics of the PCF polarization filter are investigated by the full-vector finite-element method. By optimizing the geometric parameters of the PCF, when the fiber length is 5 mm, the polarization filter has a bandwidth of 990 nm and an extinction ratio(ER) of lower than -20 dB. Moreover, a single wavelength polarization filter can also be achieved, along with an ER of -279.78 dB at wavelength 1.55 μm. It is believed that the proposed PCF polarization filter will be very useful in laser and optical communication systems.     

利用Kagome光纤实现多芯光子晶体光纤的输出合束

多芯光纤的输出光束只能在远场和焦点附近实现良好的同相位超模合束,这种超模传输特性大大影响了多芯光纤的应用范围.一种新型中空Kagome光纤为解决这一难题提供了可行的方案,利用中空Kagome光纤可以实现七芯光纤输出模式的整形合束.本文利用中心波长800 nm的钛宝石飞秒激光作为激光源,耦合入七芯非线性光子晶体光纤,得到700 nm至1050 nm的展宽光谱,并实现同相位超模输出.随后,将非线性展宽之后的宽谱七芯光束耦合至Kagome光子晶体光纤中,从Kagome光纤输出光斑呈高斯分布的模式传输,不再演变回七芯模式,耦合效率71%.实验还进一步验证此方法适用于不同结构的多芯光纤,为多芯光纤在高功率激光等领域的应用提供了参考.     

高双折射的混合格子太赫兹光子晶体光纤的设计与研究

提出了一种新型高双折射的混合格子太赫兹光子晶体光纤,通过对芯区亚波长尺寸的空气孔进行多种格子组合排列,增加结构的非对称性实现高的模式双折射. 全文仿真建模采用专业的有限元计算软件COMSOL Multiphysics 4.0,结果表明:混合格子太赫兹光子晶体光纤在很宽的频率范围内都具有较高的双折射(达到10^-2)和低的限制损耗,且通过改变光纤的某些参数可以灵活地控制其双折射或限制损耗特性. 相比于同类光通信波段光纤,由于太赫兹波波长较大,能够降低芯区微结构加工的难度,具有可行性. 关键词： 双折射 混合格子 太赫兹光子晶体光纤 限制损耗     

高双折射光子晶体光纤偏振模色散测量

对一种高双折射光子晶体光纤的偏振模色散进行了测量.实验用26 m长光子晶体光纤使皮秒光脉冲的两个正交偏振模产生了108 ps时延.运用脉冲时延法和固定分析仪法对这种高双折射光子晶体光纤的偏振模色散进行了实验测量，测量得到其偏振模色散参量可达4154 ps/km，对应的模式双折射度为1.25×10－3.这种新型的高双折射光纤可用于补偿光纤通信系统中的偏振模色散.     

Numerical analysis of a temperature sensor based on the photonic band gap effect in a photonic crystal fiber

In this paper we investigate, by the plane wave expansion method and an analytical model, the temperature effect on the photonic band gap fiber, and we report on a numerical demonstration of a temperature sensor based on the photonic band gap (PBG) shift in a solid core photonic crystal fiber (PCF) infiltrated with a high refractive index oil. The bandwidth and the position of the central wavelength of the band gap are the parameters of interests for our temperature sensing purpose. Simulation results were found to be in excellent agreement with the refractive index scaling law and the highest sensitivity of 3.21?nm/°C was achieved, and it will be even higher than the grating based sensors written in PCFs with similar structure.     

Photonic crystal fiber tip interferometer for refractive index sensing

In this paper we present an interferometer based on photonic crystal fiber (PCF) tip ended with a solid silica-sphere for refractive index sensing. The sensor is fabricated by splicing one end of the holey PCF to a single mode fiber (SMF) and applying arc at the other end to form a solid sphere. The sensor has been experimentally tested for refractive index and temperature sensing by monitoring its wavelength shift. Measurement results show that the sensor has the resolution of the order of 8.7×10(-4) over the refractive index range of 1.33-1.40, and temperature sensitivity of the order of 10 pm/°C in the range of 20-100 °C.     

Variable photonic crystal fiber optical attenuator combining air hole reduction induced radiation and bending loss

Recently, an optical attenuator has been important in fiber optic communication systems, because a transmission power in fiber has become higher due to a channel increment in wavelength division multiplexing transmission. A photonic crystal fiber (PCF) optical attenuator is fabricated by air hole diameter reduction in a part of PCF in which radiations are caused in the air hole diameter reduced part of PCF. A PCF optical attenuator has a high power resistance feature due to its radiation-induced operation of optical attenuation. In this paper, we proposed a variable PCF optical attenuator in which a bend was applied to the air hole diameter reduced part in PCF optical attenuator that was fabricated by CO₂ laser irradiation. In PCF optical attenuator fabrication, the attenuation was adjusted by the reduced air hole diameter with laser irradiation time control. It was demonstrated that 10.6–13.5 dB of variable attenuation was obtained at 1550 nm-wavelength with 0°–90° bending angle applied to the air hole diameter reduced part in PCF optical attenuator.     

Photosensitive, all-glass AgPO3/silicaphotonic bandgap fiber

Photonic bandgap (PBG) guidance is observed in a solid core photonic crystal fiber (PCF) consisting of silver metaphosphate (AgPO(3)) glass embedded into a silica cladding, realized by vacuum-assisted infiltration of the molten glass into the hollow channels of a commercial silica PCF. Morphologic analysis of the cladding microstructure by optical and scanning electron microscopy reveals the formation of highly homogeneous glass strands along the PCF length. The characteristic transmission spectrum of the fiber shows PBG guidance in the range between 350 and 1650 nm. The exposure of the cladding glass matrix, using 355 nm, 150 ps laser irradiation, allows photo-induced enhancement of the transmission-to-stop-band extinction ratio by ～60 dB/cm and bandwidth tuning. Numerical calculations of the transmission pattern of the fabricated AgPO(3)/silica bandgap fiber are in good agreement with experiments.     

在远离光子晶体光纤零色散波长的正常色散区入射飞秒脉冲产生四波混频及孤子效应的实验研究

在远离光子晶体光纤零色散波长的正常色散区入射飞秒脉冲,实验产生了一对由四波混频引起的信号波带和闲频波带,及一对由脉冲内拉曼散射和非孤子辐射引起的孤子和色散波带,并观察到功率饱和现象.利用有限元法理论模拟了光纤的色散和非线性特性,用四波混频的相位匹配条件模拟了光纤在满足相位匹配条件下所产生的信号波带和闲频波带出现的可能位置,并与实验结果符合得很好.结果表明:即使在光子晶体光纤的正常色散区抽运激光脉冲亦可以产生四波混频和孤子效应;研究发现四波混频的产生是由四阶色散参量引起的;并进一步从理论上解释了孤子及色散波的产生原因.     

Broad spectral photonic crystal fiber surface enhanced Raman scattering probe

A broad spectral surface enhanced Raman scattering sensor is developed using the solid core holey photonic crystal fiber with silver nanoparticles cluster. This SERS probe offers an operational excitation wavelength range overlaying visible light and near infrared light. The PCF SERS sensing is demonstrated in the detection of the 4-Mercaptobenzoic acid (10⁻⁶ M) solution with 514.5 and 785 nm excitation. In this structure of PCF sensor, the related analysis shows that leakage modes also make an important contribution in the SERS activity not only by the evanescent field way.     

Photonic Crystal Fiber Attenuator

We propose a novel fiber attenuator based on photonic crystal fibers. The difference in the modal field diameters of a conventional single mode fiber and a photonic crystal fiber was used. A variable optical attenuator was also achieved by applying macro-bending on the PCF part of the proposed attenuator