Synthesis and surface functionalization of silica nanoparticles for nanomedicine

There are a wide variety of silica nanoformulations being investigated for biomedical applications. Silica nanoparticles can be produced using a wide variety of synthetic techniques with precise control over their physical and chemical characteristics. Inorganic nanoformulations are often criticized or neglected for their poor tolerance; however, extensive studies into silica nanoparticle biodistributions and toxicology have shown that silica nanoparticles may be well tolerated, and in some case are excreted or are biodegradable. Robust synthetic techniques have allowed silica nanoparticles to be developed for applications such as biomedical imaging contrast agents, ablative therapy sensitizers, and drug delivery vehicles. This review explores the synthetic techniques used to create and modify an assortment of silica nanoformulations, as well as several of the diagnostic and therapeutic applications.     

Characterisation of silica nanoparticles prior to in vitro studies: from primary particles to agglomerates

The size, surface charge and agglomeration state of nanoparticles under physiological conditions are fundamental parameters to be determined prior to their application in toxicological studies. Although silica-based materials are among the most promising candidates for biomedical applications, more systematic studies concerning the characterisation before performing toxicological studies are necessary. This interest is based on the necessity to elucidate the mechanisms affecting its toxicity. We present here TEM, SAXS and SMPS as a combination of methods allowing an accurate determination of single nanoparticle sizes. For the commercial material, Ludox TM50 single particle sizes around 30 nm were found in solution. DLS measurements of single particles are rather affected by polydispersity and particles concentration but this technique is useful to monitor their agglomeration state. Here, the influence of nanoparticle concentration, ionic strength (IS), pH and bath sonication on the agglomeration behaviour of silica particles in solution has been systematically investigated. Moreover, the colloidal stability of silica particles in the presence of BSA has been investigated showing a correlation between silica and protein concentrations and the formation of agglomerates. Finally, the colloidal stability of silica particles in standard cell culture medium has been tested, concluding the necessity of surface modification in order to preserve silica as primary particles in the presence of serum. The results presented here have major implications on toxicity investigations because silica agglomeration will change the probability and uptake mechanisms and thereby may affect toxicity.     

Synthesis of Eu(III): naphtoyltrifluoroacetone:trioctylphosphineoxide complex-doped silica fluorescent nanoparticles through a new approach

In this study, a new approach for the preparation of a fluorescent europium(III) complex-doped silica nanoparticles has been developed. The synthesis process involved the following steps: (1) preparing silica nanoparticles by water-in-oil microemulsion method, (2) dyeing the spherical silica particles by europium(III): naphtoyltrifluoroacetone (NTA):trioctylphosphineoxide (TOPO), (3) adsorbing polyvinylpyrrolidone (PVP) onto the core structure and growing silica on PVP surface. The as-prepared nanoparticles exhibited stronger emission intensity, higher photo- and chemical stability. Despite the fact that europium(III) complex was doped into the nanoparticles, its fluorescence properties such as a wide Stokes shift, a narrow emission peak, and long fluorescence lifetime, were retained. The nanoparticles are uniform in shape and size (50 ± 5 nm in diameter). This study could provide new avenue for the fabrication of Eu: NTA:TOPO-based nanoparticles, facilitating their application in bioassay issues.     

钆掺杂的类普鲁士蓝空心配位聚合物作为多模式成像探针及药物载体的研究

本文通过溶剂热法制备了具有多模式成像能力的钆掺杂的类普鲁士蓝空心配位聚合物,并包覆二氧化硅层以进一步应用. 磁共振成像实验表明纳米粒子表现出相当好的双模式磁共振成像能力. 此外,在各种波长的激光束下纳米粒子也会发出多色荧光. 由于其空心多孔结构,该聚合物具有1166 mg/g的高载药(阿霉素)能力和83.29%的药物封装效率,这使其成为潜在的药物载体平台. 特别在二氧化硅包覆之后,生物相容性也都得到了增强.     

核酸功能化纳米探针在细胞荧光成像中的应用

核酸是携带遗传信息的物质,既存在于自然界中也能够通过成熟技术人工合成。通过体外筛选技术还可以筛选出具有特殊功能的核酸序列,例如核酸适体和脱氧核酶。核酸通过沃森-克里克碱基互补配对原则进行杂交,具有很强的专一性。无论是通过序列设计还是体外筛选,核酸探针在生物标志物的分析与成像应用方面都发挥着重要作用。纳米材料辅助构建核酸功能化纳米探针,可以保护负载的核酸探针不被核酸酶降解,并且无需转染试剂就能进入细胞,在细胞荧光成像应用上具有很大优势。为解决细胞内有些生物标志物含量低、难于检测的问题,目前已构建多种适用于细胞水平的成像信号放大方法来实现对低丰度生物标志物的高灵敏成像。本文主要综述了核酸功能化纳米探针在细胞荧光成像中的应用进展,包括反义寡核苷酸功能化纳米探针、核酸适体功能化纳米探针、脱氧核酶功能化纳米探针等,同时介绍了他们在成像信号放大中的应用。     

Synthesis of cubic LiNbO3 nanoparticles and their application in vitro bioimaging

Stoichiometric LiNbO₃ nanoparticles with regular rhombohedral morphology and high crystallinity were synthesized through a molten salt approach. The as-synthesized cubic LiNbO₃ nanoparticles as nanoprobes for long-term imaging in vitro were investigated. The as-synthesized nanoprobes exhibit unique properties of long-term observation without photobleaching, flexibility in excitation wavelength, and excellent photostability. The biocompatibility of LiNbO₃ nanoprobes was determined by in vitro assay of cytotoxicity. All the tested samples presented no obvious toxicity.     

Off-resonance saturation MRI of superparamagnetic nanoprobes: theoretical models and experimental validations

Off-resonance saturation (ORS) is a new magnetic resonance imaging (MRI) method that has shown greatly improved contrast sensitivity for the detection of cancer-specific biomarkers by superparamagnetic nanoprobes in vivo. However, quantitative understanding of the ORS contrast mechanism and its dependence on the structural parameters of superparamagnetic nanoprobes are still lacking. Here we propose a quantitative model of ORS contrast and its experimental validation by superparamagnetic polymeric micelles (SPPM) with precisely controlled structural properties. Size selected, monodisperse Fe?O? nanoparticles (6.1 ± 0.2 nm) were used to form a series of SPPM nanoprobes with specifically controlled corona thickness using 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-methoxypoly(ethylene glycol) (DSPE-PEG) with different PEG molecular weights. Transmission electron microscopy and dynamic light scattering showed that SPPM were uniform in size. The average hydrodynamic diameters of SPPM with PEG lengths of 0.55, 1, 2, and 5 kD were 16.6 ± 2.8, 18.4 ± 2.9, 24.1 ± 3.4, and 28.9 ± 3.4 nm, respectively. MRI experiments at 7 T determined that r? values of SPPM with 0.55, 1, 2, and 5 kD PEG as corona were 201 ± 3, 136 ± 8, 107 ± 5, and 108 ± 8 FemM?1s?1, respectively. ORS intensity from Z-spectra of SPPM showed a significant correlation with the inverse of T? relaxation rates (1/T?, s?1) of the SPPM nanoprobes regardless of the PEG corona thickness. These data provide the fundamental understanding of the structure-property relationships between the SPPM nanostructures and ORS sensitivity, which offers useful mechanistic insights for the future improvement of SPPM nanoprobes in cancer molecular imaging applications.     

Facile approach in fabricating superhydrophobic coatings from silica-based nanocomposite

This study develops a one-step technique to synthesize various super water-repellent coatings with addition of modified silica nanoparticles. Surface topography observation showed that stacking of spherical silica nanoparticles formed primary surface roughness. The wettability of the products was investigated. It was found that the as-prepared surface possesses superhydrophobic properties not only for pure water but also for corrosive water under both acidic and basic conditions. The silica-based nanocomposite coatings can be fabricated on glass substrates and other functional engineering material surfaces, such as copper, iron, aluminum alloy, to form self-cleaning coatings.     

Facile Functionalization of Gold Nanoparticles with PLGA Polymer Brushes and Efficient Encapsulation into PLGA Nanoparticles: Toward Spatially Precise Bioimaging of Polymeric Nanoparticles

Nanocarriers prepared from poly(lactide‐co‐glycolide) (PLGA) have broad biomedical applications. Understanding their cellular uptake and distribution requires appropriate visualization in complex biological compartments with high spatial resolution, which cannot be offered by traditional imaging techniques based on fluorescent or radioactive probes. Herein, the encapsulation of gold nanoparticles (GNPs) into PLGA nanoparticles is proposed, which should allow precise spatial visualization in cells using electron microscopy. Available protocols for encapsulating GNPs into polymeric matrices are limited and associated with colloidal instability and low encapsulation efficiency. In this report, the following are described: 1) a facile protocol to functionalize GNPs with PLGA polymer followed by 2) encapsulation of the prepared PLGA‐capped GNPs into PLGA nanocarriers with 100% encapsulation efficiency. The remarkable encapsulation of PLGA‐GNPs into PLGA matrix obeys the general rule in chemistry “like dissolves like” as evident from poor encapsulation of GNPs capped with other polymers. Moreover, it is shown that how the encapsulated gold nanoparticles serve as nanoprobes to visualize PLGA polymeric hosts inside cancer cells at the spatial resolution of the electron microscope. The described methods should be applicable to a wide range of inorganic nanoprobes and provide a new method of labeling pharmaceutical polymeric nanocarriers to understand their biological fate at high spatial resolution.     

CdSe/ZnS Fluorescent Nanoparticles as Nanoprobes of Local pH in Diagnostics of Oncology

We discuss the fluorescence spectra from a set of points in histological sections of colon tissue with different levels of pathology that were stained with hydrophilic semiconductor CdSe/ZnS nanoparticles that were modified by a unique method at the phase interface. The shifts in the fluorescence spectra that were recorded for stained cells at different pathologies are described using the electrochromism of the nanoparticles. Aqueous solutions of the CdSe/ZnS nanoparticles with different pH values are used as systems that model the acidity of a biological medium. It has been shown that the shifts of the fluorescence bands of the CdSe/ZnS nanoparticles are caused by a change in the local electrical field that is induced by solvated ions near their surface at different pH values of the solutions. The application of the CdSe/ZnS nanoparticles as nanoprobes for the local pH in biological tissue is discussed in the context of this model.     

Cobalt Phosphide Nanoparticles Applied as a Theranostic Agent for Multimodal Imaging and Anticancer Photothermal Therapy

Biocompatible single‐component theranostic nanoagents instinctly affording multiple imaging modalities with satisfying therapeutic functions are highly desirable for anticancer treatments. Although cobalt‐based phosphides are well‐recognized as competent electrocatalysts, their potentials for biomedical applications remain unexplored. In this work, cobalt phosphide nanoparticles (CoP NPs) are developed to be a powerful theranostic agent for multimodal imaging and anticancer photothermal therapy. The uniform CoP NPs in a size of ≈21 nm are synthesized via a facile thermal decomposition method, followed by surface modification. The resultant CoP NPs exhibit excellent compatibility and stability in water as well as various physiological solutions. Supported by the good biocompatibility, strong near‐infrared absorption, and high photothermal conversion property, significant photothermal effect of the NPs is demonstrated, realizing efficient hyperthermia ablation on cancer cells. Importantly, the CoP NPs have shown considerable capabilities on high‐contrast in vitro and in vivo triple‐modal imaging, including infrared thermal (IRT), photoacoustic (PA), and T₂‐weighted magnetic resonance (MR) imaging. This work has unraveled the promising potentials of CoP‐based nanoagent for precise diagnosis and efficient therapy.     

Targeting Upconversion Nanoprobes for Magnetic Resonance Imaging of Early Colon Cancer

Colon cancer (CC) is one of the most common intestinal malignancies and is difficult to detect in its early stage by magnetic resonance imaging (MRI) with currently used contrast agents (CAs). The development of targeted CAs contributes to the early diagnosis of CC and thereby enables early intervention and timely therapy. Considering the outstanding performance of upconversion nanoprobes (UCNPs) in high‐performance MR and fluorescence imaging, a new type of nanoprobes with considerably enhanced imaging performance is developed herein. Carcinoembryonic antigen (CEA) antibody is conjugated onto the surface of UCNPs to achieve the targeted imaging of early CC tumors, which overexpress CEA. Both toxicity tests and histological/hematological examinations demonstrate the excellent biocompatibility of these CC‐targeting nanoprobes, which possess great potential for clinical application in the early diagnosis of CC.     

Gold aggregates on silica templates and decorated silica arrays for SERS applications

In this work, we report the fabrication and characterization of size controllable gold nanoparticles (NPs) aggregates for their application in surface enhanced Raman scattering (SERS). Aggregates were prepared using two methodologies: (i) by using silica particles arrays as a template to agglomerate gold NPs between the inter-particle interstices, and (ii) by functionalizing silica particles to be used as support to graft gold nanoparticles and thus to form decorated silica particle arrays. These substrates were used in the detection of Rhodamine 6G producing an enhancement factor (EF) from 10⁴ to 10⁶ that is associated to the increment of hot spot (HS) sites, and the fact that plasmon resonance from aggregates and absorption wavelength of test molecules are closely in resonance with excitation wavelength. The EF was also reduced when the plasmon resonance was red-shifted as a result of the increment of aggregate size. In spite of this, the EF is high enough to make these SERS substrates excellent candidates for sensing applications.     

Uptake of FITC Labeled Silica Nanoparticles and Quantum Dots by Rice Seedlings: Effects on Seed Germination and Their Potential as Biolabels for Plants

The use of fluorescent nanomaterials with good photostability and biocompatibility in live imaging of cells has gained increased attention. Even though several imaging techniques have been reported for mammalian cells, very limited literatures are available for nanomaterial based live imaging in plant system. We studied the uptake ability of two different nanomaterials, the highly photostable CdSe quantum dots and highly biocompatible FITC-labeled silica nanoparticles by rice seedlings which could provide greater opportunities for developing novel in vivo imaging techniques in plants. The effects of these nanomaterials on rice seed germination have also been studied for analyzing their phytotoxic effects on plants. We observed good germination of seeds in the presence of FITC-labeled silica nanoparticles whereas germination was arrested with quantum dots. The uptake of both the nanomaterials has been observed with rice seedlings, which calls for more research for recommending their safe use as biolabels in plants.     

A simple method for preparation of transparent hydrophobic silica-based coatings on different substrates

A facile, inexpensive, and general approach is explored for the fabrication of transparent silica/organic silicon hybrid sol, which could form transparent hydrophobic coatings on different substrates conveniently. The sol was prepared by using hexamethyldisilazane (HMDS) as a surface-modifying agent and the source of base catalyst required for the hydrolysis of tetraethoxysilane (TEOS). The resulting silica-based coatings on glass slide have shown an optical transmission over the visible range up to 89% (in reference to 100% transmission defined by a plain glass substrate) and high thermal stability. The water contact angle of the film reached 152^○. Hydrophobic coatings with excellent optical transmittance were also successfully formed on writing paper and aluminum foils. The transparent hydrophobic silica-based hybrid sol will have potential applications in creating outdoor building glass, protecting paper files from moisture and preventing metals from corrosion.     

Synthesis of Fluorescent Silica Nanoparticles and Their Applications as Fluorescence Probes

This paper presents the synthesis of organic dye molecules embedded silica nanoparticles by Stöber method and their applications as fluorescence probes in cell imaging. By modifying the surface of fluorescent silica nanoparticles (FSNs) with amino, biologically functionalized and monodisperse FSNs can be obtained. In this work, FSNs were conjugated with monoclonal anti-Carcinoembryonic Antigen (anti-CEA) antibody via covalent binding. The antibody-conjugated FSNs can be used to label the SPCA-1 cells successfully, demonstrating that the application of FSNs as fluorescence probes in fluorescence imaging and bioassay would be feasible.     

Athermal silica-based interferometer-type planar light-wave circuits realized by a multicore fabrication method

Athermal silica-based interferometer-type planar light-wave circuits were realized by a newly developed multicore fabrication method. In this method, inductively coupled chemical-vapor deposition and polishing technologies are adopted on a silica substrate with a trench-type waveguide pattern prepared by reactive ion etching. Two kinds of deposited core material, 10GeO2-90SiO2 (mol. %) and 8GeO2-5B2O3-87SiO2 (mol. %), which show wavelength temperature dependence of 9.7 and 8.1 pm/degree C, respectively, were used to prepare the waveguide sections in a device. By adjustment of the lengths of waveguide sections with these two different core materials, athermal characteristics of less than 0.5 pm/degree C were achieved for Mach-Zehnder interferometer filter devices at the 1.55-microm wavelength range while the temperature varied from -20 to 80 degrees C. The new method is also applicable for the preparation of many other kinds of functional devices.     

Magnetic nanocomposite spinel and FeCo core-shell and mesoporous systems

The fabrication of condensed silica and mesoporous silica coated spinel CoFe₂O₄ and FeCo alloy magnetic nanocomposites are reported. The encapsulation of well-defined 5 nm thick uniform silica layer on CoFe₂O₄ magnetic nanoparticles was performed. The formation of mesopores in the shell was a consequence of removal of organic group of the precursor through annealing. The NiO nanoparticles were loaded into the mesoporous silica. The mesoporous silica shells leads to a larger coercivity than that of pure CoFe₂O₄ magnetic nanoparticles due to the decrease of interparticle interactions and magneto-elastic anisotropy. In addition, the FeCo nanoparticles were coated by condensed and mesoporous silica. The condensed silica can protect the reactive FeCo alloy from oxidation up to 300 °C. However, saturation magnetization of FeCo nanoparticles coated by silica after 400 °C annealing is dramatically decreased due to the oxidation of the FeCo core. The mesoporous silica coated magnetic nanostructure loaded with NiO as a final product could be used in the field of biomedical applications.     

Controlled synthesis and biomolecular probe application of gold nanoparticles

In addition to their optical properties, the ability of gold nanoparticles (Au NPs) to generate table immobilization of biomolecules, whilst retaining their bioactivities is a major advantage to apply them as biosensors. Optical biosensors using Au NPs are simple, fast and reliable and, recently, they have been moving from laboratory study to the point of practical use. The optical properties of Au NPs strongly depend on their size, shape, degree of aggregation and the functional groups on their surface. Rapid advances in the field of nanotechnology offer us a great opportunity to develop the controllable synthesis and modification of Au NPs as well as to study on their properties and applications. The size-controlled growth of Au NPs requires the isotropic growth on the surface of Au nuclei whereas anisotropic growth will induce the formation of Au NPs of varying shape. Functionalized Au NPs provide sensitive and selective biosensors for the detection of many targets, including metal ions, small organic compounds, protein, DNA, RNA and cell based on their optical, electrical or electrochemical signals. In this review, we will discuss the size- and shape-controlled growth and functionalization of Au NPs to obtain Au nanoprobes. The basis of the optical detection of Au nanoprobes and their applications in nucleic acid, protein detection and cell imaging are also introduced.     

Gadolinium-doped carbon quantum dots loaded magnetite nanoparticles as a bimodal nanoprobe for both fluorescence and magnetic resonance imaging

Nowadays, it is highly desired to develop dual-modal fluorescence and magnetic resonance imaging (FI/MRI) probes in medical imaging because it unites the respective advantages of each imaging modality: high sensitivity of FI and superior spatial resolution of MRI. In this study, a facile strategy to fabricate a new bimodal imaging nanoprobe (Gd-CQDs@N-Fe₃O₄) was reported by integrating the fluorescence ability of carbon quantum dots (CQDs) and T₁ and T₂ contrast-enhancing functionality of Gd(III) ions and Fe₃O₄ nanoparticles into a single hybrid nanostructure. The hybrid composites were investigated by FT-IR, XRD, TEM, XPS, VSM, and so on, which confirmed that Gd-CQDs@N-Fe₃O₄ nanoparticles were successfully obtained and exhibited superparamagnetic property at room temperature. The derived nanoprobes presented an excitation wavelength-independent emission behavior. In addition, r₁ and r₂ relaxivities of the synthesized imaging nanoprobes were measured to be 5.16 and 115.6 mM⁻¹ s⁻¹, which nominated Gd-CQDs@N-Fe₃O₄ nanocomposites as a suitable T₁-T₂ contrast agent. The Gd-CQDs@N-Fe₃O₄ nanoparticles combining two synergetic imaging modalities showed great potential in FI/MRI dual-modal imaging for a more complementary and accurate detection.