纠缠压缩真空态的纠缠转移

通过分析光学分束器对压缩真空态光场的作用,发现如果分束器的输入光是两束具有同样振幅和相位的单模压缩真空态光场,则输出光为双模压缩真空态光场;若分束器的输入光是两束具有同样振幅但有π相位差的单模压缩真空态光场,则输出光仍为两束单模压缩真空态光场.对于双模压缩真空态光场,每个模中容纳的光子数可以是基数或偶数.而对于单模压缩真空态光场,每个模中只能包含偶数个光子.根据这些结果,提出了一个纠缠转移的方案.在这个方案中,两个纠缠压缩真空态光场被用作量子信道,通过利用光学分束器作用和光子数探测的方法,并在经典通讯的帮助下,实现了三个通讯伙伴之间的纠缠转移.     

基于非球面透镜的光分束器设计

 针对目前532 nm波长光的分束技术在光电测控系统（如激光干涉测速）等领域的广泛应用,提出一种光分束器的设计方法,此分束器可将光纤入射的532 nm绿光分成接近等比的多束光（包括一分二、一分三、一分四）。此系统首先用非球面透镜将光纤入射的光束准直,再通过分光片分光后用同样的透镜将光束耦合进光纤,达到了77%的通光效率,附加损耗约1 dB。详细介绍了非球面透镜的设计、分束器的结构、装配及其实验结果,并对实验结果以及研制过程中影响分束器效率的各种因素进行分析。     

Second-order temporal interference of two independent light beams at an asymmetrical beam splitter

The second-order temporal interference of classical and nonclassical light at an asymmetrical beam splitter is discussed based on two-photon interference in Feynman's path integral theory. The visibility of the second-order interference pattern is determined by the properties of the superposed light beams, the ratio between the intensities of these two light beams, and the reflectivity of the asymmetrical beam splitter. Some requirements about the asymmetrical beam splitter have to be satisfied in order to ensure that the visibility of the second-order interference pattern of nonclassical light beams exceeds the classical limit. The visibility of the second-order interference pattern of photons emitted by two independent single-photon sources is independent of the ratio between the intensities. These conclusions are important for the researches and applications in quantum optics and quantum information when an asymmetrical beam splitter is employed.     

Design of a 50/50 splitting ratio non-polarizing beam splitter based on the modal method with fused-silica transmission gratings

The optical design of a beam splitter that has a 50/50 splitting ratio regardless of the polarization is presented. The non-polarizing beam splitter (NPBS) is based on the fused-silica rectangular transmission gratings with high intensity tolerance. The modal method has been used to estimate the effective index of the modes excited in the grating region for TE and TM polarizations. If a phase difference equals an odd multiples of π/2 for the first two modes (i.e. modes 0 and 1), the incident light will be diffracted into the 0 and ?1 orders with about 50% and 50% diffraction efficiency for TM and TE polarizations, respectively.     

Tunable multi-function broadband splitter with optical bistability based on surface plasmon

A tunable multi-function broadband splitter consisted of a silver film, Kerr medium and a silver grating sandwiched between linear dielectrics waveguides is proposed and numerically investigated. This splitter can realize the functions of the beam splitter, the polarization splitter and wavelength beam splitter. This surface plasmon based device provides a unique approach for polarization sensitive manipulation of light in an integrated circuit and will be essential for future classical and quantum information processes.     

A 50% beam splitter for s-polarized light in the 700-to 900-nm range

A 50/50 beam splitter for s-polarized light in the 700-to 900-nm range on the basis of refractory oxides was synthesized and studied.     

Enhancement and generation of sum squeezing in two-mode light in mixing with coherent light using a beam splitter

Recently, we showed [J. Phys. B: At. Mol. Opt. Phys. 38, 665 (2005)] that the `amplitude-squared squeezing', a non-classical feature, can be enhanced in mixing with a coherent light beam using a beam splitter. Here, we show that the sum squeezing in a two-uncorrelated-mode light beam (one mode is in Gaussian state and the other one is in coherent state), which is degenerate limit of amplitude-squared squeezing, may be generated or enhanced in mixing with a two-mode coherent light beam using a beam splitter.     

Novel composite beam splitter with directional coupler and Y-junction using photonic crystal

We propose and analyze a novel multiway high efficiency composite beam splitter based on propagation properties of the light waves in directional coupler and Y-junction. The splitting properties of the beam splitter have been numerically simulated and analyzed using the PWE and FDTD methods. Then in order to obtain equal distribution of power, we place and adjust some additional rods in the output waveguides to optimize the devices. It was shown that a large separating angle, a high beam rate, high flexibility, has been extended to have more light output channels in the beam splitter.     

改进型迈克耳孙干涉仪

采用分光梭镜代替迈克耳孙干涉仪中的分束镜和补偿板，不仅消除了杂散光斑，且简化了仪器的结构．     

光子晶体环形谐振腔异质结构超微多路光分束器

基于直波导和环形谐振腔的耦合特性,设计了一种新型、高效的二维光子晶体异质结构光分束器.时域有限差分法模拟表明,该设计仅仅通过改变介质柱的折射率,使光场发生重新分布,便可实现输出能量的均分或自由分配.在通信波长范围,该设计结构尺寸小、分束角度大、分束率高,这些特性使其在光通信领域具有重要的应用前景.     

一种激光平行分束器的设计

为满足波面剪切干涉和双细光束干涉曲反射表面非接触精密测量、台阶高度测量以及其他平行分光需要,利用双折射晶体特性,研究并设计了一种单一平板激光平行分束器。当一束激光入射到双折射晶体时,它的2个相互正交的的偏振分量将有不同的折射特性,因此特定晶轴方向和厚度的晶体平行平板可以实现入射光束的平行分束。描述了双折射晶体平行平板的分束原理,推导了分束距离与光轴方向、晶体厚度、入射角的关系,分析了分束距离随主要设计参数的变化规律。采用设计的晶体激光分束器进行了实验测试,验证了分析与实测结果的一致性。     

Ultracompact high-efficiency polarizing beam splitter with a hybrid photonic crystal and conventional waveguide structure

We propose an ultracompact high-efficiency polarizing beam splitter that operates over a wide wavelength range and is based on a hybrid photonic crystal and a conventional waveguide structure. Within a small area (15 microm x 10 microm), this polarizing beam splitter separates TM- and TE-polarized modes into orthogonal output waveguides. Results of simulations with the two-dimensional finite-difference time-domain method show that 99.3% of TM-polarized light is deflected by the photonic crystal structure (with a 28.0-dB extinction ratio), whereas 99.0% of TE-polarized light propagates through the structure (with a 32.2-dB extinction ratio). Wave vector diagrams are employed to explain the operation of a polarizing beam splitter. Tolerance analysis reveals a large tolerance to fabrication errors.     

An all-optical parallel scheme for the exclusive-or operation

In this letter, we propose an all-optical parallel scheme for the exclusive-or (XOR) logic processing, in which the bright and dark pixels of an image source are adopted to represent the binary data. Two orthogonally polarized coherent light beams are overlapped using a 50/50 beam splitter, and are then checked using a polarization analyzer. The distribution of light intensity of final output image is the result of the XOR logic operation on the input pixels.     

Optical transformer of photon statistics

The possibility of a linear optical transformer of photon statistics for multimode light is suggested. The transformation coefficients are obtained explicitly in terms of multivariable Hermite polynomials. As physical examples of a linear transformer a resonator with moving walls and a lossless beam splitter are discussed as optical elements that change the photon statistics of light beams. The beam splitter is shown to produce redistribution of quadrature squeezing and correlation between two modes of light.     

新型小尺寸窄带偏振分光器在光纤通信中的应用

在光纤通信中,为了在不改变调制波长范围的基础上仍能实现更多数据通道的波分复用,设计了一种新型的小尺寸窄带偏振分光器,用于对现有的数据通信网络进行扩容以及提高光信号的信噪比。在该分光器上蒸镀了两种新设计的膜系,一层是窄带滤光膜,另一层是偏振分光膜。采用TFCalc软件仿真,设计结果中窄带滤光膜的带宽约为0.4 nm,偏振分光膜在1 530～1 560 nm范围内对p光的通透性能优于99.8%。基于以上膜系设计在BK7光学玻璃上实际制备两组膜系,实验采用Agilent 8164-A型光波测量系统对经过膜后的光进行光谱分析。结果显示,窄带滤光膜的实际带宽优于0.4 nm,增益平坦度小于-0.05 dB,相比现有常见的0.8 nm滤光膜具有更窄的带宽,可以实现在调制波长范围不变的条件下增大波分复用的数据通道总量。偏振滤光膜的实际p光透光率为99.6%,相比仿真值略低,但仍优于设计要求,相比传统分光器的光信号强度保留效果更好,具有更高的信噪比。综上所述,该分光器具有更好的应用价值和实用意义。     

Broad band beam splitter based on the double-groove fused silica grating

In this paper, we propose a broad band 1 × 3 beam splitter operating in the telecommunication wavelength band under normal incidence, this device consisting of a double-groove fused silica grating layer is designed with using the inverse mathematical method and rigorous vector diffraction theory. It is shown from our calculations that the device presents excellent beam splitter ability for TE polarization light with the average diffraction efficiencies is more than 95% over ∼100 nm wavelength range, moreover, the uniformity of our beam splitter is better than 2% in the whole wavelength band. Furthermore, the physical understanding of the diffraction behaviors taking place inside the beam splitter gratings can be explained by the modal method.     

高精度分光棱镜组的胶合

通过一种分光棱镜组的胶合工艺,从胶合仪器的工作原理、调试、胶合方法及胶合剂等方面讨论了在现有技术水平且无专用仪器的情况下,如何保持分光棱镜组支光路中光束的折转角变、平行性及位置精度。     

一种全光纤型观测光波粒二象性的方法

提出一种结构简单、实验现象明显的光波粒二象性观测方案,本方案以波的相干叠加突出显示光的波动性,以粒子在50/50分束器的路径随机选择特性突出显示光的粒子性.以衰减强激光脉冲为光子源,在实验室获得的干涉对比度超过99%,单粒子特性超过90%.实验结果表明此方案有望在实际得到广泛应用.     

A compact T-branch beam splitter based on anomalous reflection in two-dimensional photonic crystals

We project a compact T-branch beam splitter with a micron scale using a two-dimensional (2D) photonic crystal (PC). For TE polarization, one light beam can be split into two sub-beams along opposite directions. The propagating directions of the two splitting beams remain unchanged when the incident angle varies in a certain range. Coupled-mode theory is used to analyze the truncating interface structure in order to investigate the energy loss of the splitter. Simulation results and theoretical analysis show that choosing an appropriate location of the truncating interface (PC-air interface) is very important for obtaining high efficiency due to the effect of defect modes. The most advantage of this kind of beam splitter is being fabricated and integrated easily.     

New type of Y-branch power splitter and beam expander based on eliminating anomalous reflection effect

We propose a new type of Y-branch power splitter and beam expander with scales of microns in two- dimensional （2D） photonic crystals （PCs） by drilling air holes in a silicon slice. Its functionality and performance are numerically investigated and simulated by finite-difference time-domain （FDTD） method. Simulation results show that the splitter can split a TE polarized light beam into two parallel sub-beams and the distance between them is tunable by changing the parameters of the splitter, while the expander can expand a narrow beam into a wider one, which is realized in an integrated optical circuit. The proposed device is based on the avoiding of anomalous reflection effect and the coupling transmission of defect modes of the interfaces.