三角形银纳米片的合成及其影响因素

报道了一种在不需光照的条件下制备三角形银纳米片的新方法.在表面活性剂BRIJ35存在下,将硝酸银用硼氢化钠和柠檬酸钠还原,在不同温度范围内反应形成各种尺度的三角形银纳米片,探讨了硼氢化钠浓度、BRIJ35浓度和表面活性剂的种类和溶液pH值等因素对银纳米颗粒形貌和尺寸的影响.     

银纳米枝的合成及表面增强拉曼效应

利用硝酸银与铜之间发生置换反应原理, 在铜箔上得到了有序的银纳米枝结构, 用十二烷基磺酸钠(SDS)为表面活性剂, 通过调控前驱体硝酸银的浓度, 可在铜箔上得到不同密度的银纳米枝. 表面拉曼增强实验结果表明, 当分别以对巯基苯胺(4-ATP)、腺嘌呤和罗丹明G6为探针分子时, 有序的银纳米枝结构比无序的银纳米粒子具有更好的拉曼增强活性; 且随银纳米枝密度的增加, 表面拉曼增强活性有所提高. 该有序的银纳米枝结构是较好的表面增强拉曼(SERS)活性基底, 在有机分子和生物分子的SERS检测方面将具有一定的应用前景.     

芳基油酸酰胺羟丙基磺基甜菜碱的合成及性能

合成了3种具有不同疏水基团的新型磺基甜菜碱两性表面活性剂,通过红外光谱对它们的结构进行了表征。 用滴体积法测定表面活性剂水溶液在25 ℃下的表面张力,从而确定其临界胶束浓度(cmc)及临界胶束浓度下的表面张力(γcmc);采用罗氏泡沫仪考察了浓度、温度对其泡沫性能的影响;采用分水时间法考察了其乳化性能。 结果表明,随着芳环在烷基链中的体积增大,cmc以及γcmc增大,饱和吸附面积Amin增大,而饱和吸附量Γmax减小。 3种表面活性剂的起泡性随浓度增大而增加,到一定值后趋于稳定;泡沫稳定性随浓度增大逐渐增强;起泡性随着温度的升高而显著增加,泡沫稳定性随温度升高而显著降低。 3种表面活性剂的乳化能力随浓度增大而逐渐增强然后趋于稳定。     

正负离子和表面活性剂对水解聚丙烯酰胺分子线团尺寸的影响及其作用机理

采用动态光散射(DLS)方法,研究了无机电解质正离子与负离子对部分水解聚丙烯酰胺(HPAM)分子线团尺寸的影响,也研究了阴离子型表面活性剂与非离子型表面活性剂对HPAM分子线团尺寸的影响.结果表明,无机电解质负离子对HPAM分子尺寸(分子流体力学直径(Dh))影响较小,而无机电解质正离子对Dh的影响较大,且影响程度随正离子浓度增大而减小.Ca2+、Mg2+、K+和Na+对Dh的作用强弱顺序为Mg2+>Ca2+>Na+>K+.当向聚合物溶液中加入阴离子型表面活性剂时,随表面活性剂浓度增大,Dh先减小,后增大,再减小.此外,由于强烈的静电斥力作用,阴离子型表面活性剂分子在聚合物分子表面吸附较弱,难形成"表面活性剂-聚合物"络合物,而非离子型表面活性剂会以类似于胶束聚集体的形式吸附在聚合物分子链上,形成"表面活性剂-聚合物"络合物,结果造成Dh随表面活性剂浓度增加而逐渐增大.     

硝酸银及其产物银对六角相液晶流变性影响

用偏光显微镜测定了硝酸银及其产物银对NP－10／水六角相区的影响，用动态 （应力和频率扫描）和稳态（蠕变－恢复）方法研究了硝酸银的加入和银的生成对 该体系粘弹性的影响。无机前驱物硝酸银和银的生成能使六角相区略缩，动态流变 实验表明，无机物引入纯六角相液晶体系中会使其抗剪切的能力降低，对相区两侧 影响与振荡所采用的频率有关。生成的银原子会在胶束表面聚集，增加了胶束内部 不同EO链之间的交联，造成松弛时间变长，粘弹性指数降低，稳态实验所得到的结 果与动态实验一致，并将粘性和弹性定量化。用弹簧－粘壶模型和液晶的空间构型 及作用力解释了实验结果。     

疏水缔合聚丙烯酰胺与双子表面活性剂的自组装

通过荧光光谱、动/静态激光光散射研究了疏水缔合聚丙烯酰胺(HAPAM)自组装行为及双子表面活性剂(双十四酸乙二酯双磺酸盐(DMES-14))对其的影响.实验结果表明:聚合物HAPAM在溶液中能够通过自组装形成疏水微区,表现出芘的发射光谱中第一振动峰(373nm)与第三振动峰(383nm)的荧光强度之比(I1/I3)值随聚合物浓度的增大而下降,当聚合物HAPAM浓度(CP)达到一定值后,I1/I3值不再变化;当加入表面活性剂时,HAPAM能够与双子表面活性剂在溶液中形成混合胶束,在聚合物浓度一定时,I1/I3值随表面活性剂浓度(CS)的增大急速下降,当表面活性剂浓度达到30mg·L-1时,I1/I3值趋于恒定;当表面活性剂浓度一定时,聚合物/表面活性剂二元体系中聚集体的聚集数随HAPAM浓度的增大出现先下降再增加的过程;一定量的双子表面活性剂对HAPAM分子间的缔合起促进作用,过量的双子表面活性剂对HAPAM分子间的缔合起抑制作用,使HAPAM的表观重均分子量(Mw,a)、均方根回转半径()和流体力学半径()随表面活性剂浓度增加先增大后减小,而HAPAM的/比值则随表面活性剂浓度增大出现一定程度的上升,表明HAPAM分子链段变得相对舒展.     

表面活性剂与高分子链混合体系的模拟

计算机模拟了高分子链对表面活性剂胶束形成过程的影响，以及高分子链构象性质随胶束化过程的变化.结果表明,当高分子链与表面活性剂之间的相互作用强度超过临界值后，高分子链的存在有利于表面活性剂胶束的形成.临界聚集浓度（CAC）与临界胶束浓度（CMC）的比值CAC/CMC随高分子链长的增大和相互吸引作用的增强而减小.在CAC之前，高分子链与表面活性剂分子只有动态的聚集；但在CAC之后，表面活性剂胶束随表面活性剂浓度X的增加而增大，并静态地吸附在高分子链上，形成表面活性剂/高分子聚集体.随着表面活性剂分子的加入，高分子链的均方末端距和平均非球形因子先保持恒定；从X略小于CAC开始， 和快速减小，至极小值后又逐渐增大.模拟结果支持高分子链包裹在胶束表面的实验模型.     

溶剂热法制备银纳米晶

以聚乙烯吡咯烷酮(PVP)作为表面活性剂,利用乙二醇溶剂热法成功制备了银纳米颗粒;利用场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)分析了样品的形貌和晶体结构,并考察了溶剂组成等因素对银纳米颗粒形貌的影响.研究结果表明所得银纳米晶粒径均一,直径约为90nm;增大PVP的加入量会降低产物的粒径,溶剂中水的引入会影响银纳米晶的形貌.     

AOT/Triton X-100混合反胶束体系的导电性能

采用聚乙二醇辛基苯基醚(TritonX-100)和二(2-乙基己基)琥珀酸磺酸钠(AOT)双表面活性剂,与正己烷、正己醇和水构成混合反胶束体系;研究了表面活性剂质量比、助表面活性剂含量、水油体积比和温度等因素对反胶束体系导电性能的影响,同时采用循环伏安法研究了K3Fe(CN)6/K4Fe(CN)6在该体系中的电化学行为.结果表明:由两种表面活性剂构成的反胶束体系电导率σ明显大于单一表面活性剂反胶束体系电导率;体系电导率随AOT与TritonX-100的质量比w(w=mAOT∶mTritonX-100)的变化而变化,w为0-0.4时,电导率随w增大而线性增大,之后增加趋势变缓;w=0.96时,σ达到稳定值576μS·cm-1.混合体系电导率随溶水量的增大及温度的上升而提高;而增加助表面活性剂可显著降低体系的电导率.在所研究体系中,Fe(CN)36-/Fe(CN)46-电化学反应对的氧化还原峰电位几乎不随扫描速率变化,峰电位差约为75mV,峰电流的比值约为1,氧化峰电流与扫描速率的平方根成正比,说明K3Fe(CN)6/K4Fe(CN)6在混合反胶束体系中显示出良好的氧化还原可逆性,反应由扩散步骤控制.     

加盐导致的全氟辛酸盐表面活性的反常行为

通过测定全氟辛酸铵(APFO)、全氟辛酸三甲铵(TMHPFO)、全氟辛酸三乙铵(TEHPFO)在不同浓度NaCl (0.1, 0.3, 0.5 mol•L^－1)存在时水溶液的表面张力曲线, 考察不同反离子的氟表面活性剂其表面活性随无机盐浓度的变化. 结果表明, NaCl对APFO的胶束化有明显的促进作用|对于TMHPFO和TEHPFO则在NaCl浓度较低时有很小的促进作用, NaCl浓度较高时由于Na^＋和N(CH₃) (或N(CH₂CH₃) )之间的离子交换作用反而临界胶束浓度(cmc)增大. APFO, TMHPFO的最低表面张力(γ_cmc)随着NaCl浓度的增大而增大. 而对于TEHPFO, 少量NaCl的加入有利于降低γ_cmc、然后随着NaCl浓度的增大TEHPFO的γ_cmc增大. 这说明, 加盐溶液中始终存在着屏蔽效应和离子交换作用的竞争, 随着NaCl浓度增大离子交换趋势增大|对于疏水性较高的三乙铵离子在NaCl存在的情况下离子交换作用导致的γ_cmc升高需要更高的NaCl浓度才能显现. 通常认为外加无机盐是增强表面活性剂的表面活性的方法之一, 本工作表明, 对于有些反离子为有机阳离子的氟表面活性剂, 外加无机盐, 如NaCl, 不仅不能起到显著的增效作用, 浓度大时甚至会降低表面活性剂的效能. 所以这类表面活性剂在实际使用时应尽量避免高盐环境.     

Rheological characteristics of nitrate glycerol ether cellulose gel based on phase separation in ternary system

By non-solvent-induced phase separation, nitrate glycerol ether cellulose (NGEC) gels were formed in ternary NGEC/acetone/ethanol system. The rheological behaviors of NGEC gels were investigated using dynamic rheological measurements. The final compositions and morphologies of NGEC gels were influenced by the initial solvent/non-solvent (acetone/ethanol) ratios and NGEC concentrations. In addition, the effect of initial acetone/ethanol ratios on the characteristics of NGEC gels is different from the effect of NGEC concentrations. The critical strain of NGEC gels decreased almost with increasing NGEC concentration of gels by increasing initial acetone ratio, but it increased with increasing NGEC concentration of gels by increasing NGEC concentration beyond a certain concentration in 2/3 (w/w) acetone/ethanol solution. For all gels, the storage modulus (G′) and loss modulus (G′′) of NGEC gels rapidly increased with increasing NGEC concentration of gels. In addition, the curves for G′ and G′′ were temperature sensitive throughout the entire temperature sweep, which implied that the interactions between NGEC/solvent could be disrupted upon heating to higher temperatures.     

不同分子量可德胶水悬浮液的粘弹性研究

采用动态粘弹性测量研究了不同分子量的生物大分子可德胶 (Curdlan)水悬浮液 (ASC)的流变学特性 .室温下观察到ASC具有弹性 (Solid like)行为 ,储能模量G′在测量范围内轻微依赖频率 ,而损耗模量G″和损耗角正切tanδ存在最小值 .ASC粘弹性随可德胶分子量和浓度的增加而增强 .ASC的流动特性符合Herschel Bulkley模型 ;其弹性行为可以通过渗流理论的标度弹性模型来描述 .网络结构是由于可德胶颗粒聚集或絮凝而形成的 ,当可德胶含量超过临界浓度cs=0 3 %时 ,弹性模量G′与可德胶浓度存在标度关系G′=Goεt,其中标度指数t=2 5 4.     

Silver Nitrate/Oligo(ethylene Oxide) Surfactant/Mesoporous Silica Nanocomposite Films and Monoliths

A lyotropic, liquid crystalline (LC) phase of a silver nitrate/oligo(ethylene oxide), water, and acid mixture was used for one-pot synthesis of mesoporous silica materials in which Ag(+) ions are uniformly distributed. We established that the AgNO(3)-to-surfactant mole ratio is very important in a 50 wt% surfactant/water system to preserve the hexagonal LC phase before and after the addition of the silica source. Below a 0.6 AgNO(3)-to-surfactant mole ratio, the mixture is liquid crystalline and serves as a template for silica polymerization. However, between 0.6 and 0.8 AgNO(3)-to-surfactant mole ratios, one must control the composition of the mixture during the polymerization processes. Above a 0.8 mole ratio, Ag(+) ions undergo phase separation from the reaction mixture by complexing with the surfactant molecules. The resulting silica materials obtained from AgNO(3)/surfactant ratios above 0.8 have anisotropy but without a hexagonal mesophase. Here, we establish a AgNO(3) concentration range in which the LC phase is preserved to template the synthesis of mesoporous silica, and we discuss the structural behavior of the mixtures at AgNO(3)/surfactant mole ratios of 0.00-2.00, using POM, PXRD, FTIR, and UV-Vis absorption spectroscopy. Copyright 2001 Academic Press.     

Effect of Potassium Oleate on Rheological Behavior of Cationic Guar in Aqueous Solution with Varying Temperatures

The rheology of the cationic guar (CG) solution was measured and the effects of potassium oleate (KOA) upon the rheological properties of CG solution were studied. The steady shear viscosity measurement has shown that the viscosity of CG solution increased dramatically in the presence of KOA. The viscosity enhancement of KOA upon CG solution can be approximate three orders in magnitude. The gel-like formation of CG solution is observed at the high concentration of KOA. The excess addition of KOA results in the phase separation of CG solution. The oscillatory rheological measurement has shown that the crossover modulus Gc (corresponding to either storage modulus G′ or loss modulus G″ at the frequency w_c where G′ equals G″) for CG solution, decreases with the increasing the concentration of KOA in solution. On the other hand, the apparent relaxation time τ_app (=1/w_c) increases with increasing the concentration of KOA in solution. Our experimental results suggest that for surfactant such as KOA which has a stronger tendency to form micelles in solution, the cooperative hydrophobic interaction of polymer bound to surfactants is less necessary to the formation of aggregates in solution, especially at the high concentration of surfactants. In fact, with the increase of the concentration of KOA, the number of the aggregates which associate polymer together decreases whereas the intensity of these aggregates increases. The effect of temperature upon the aggregation is also significant. With the increase of temperature, the number of the aggregates increases whereas the intensity of these aggregates decreases, probably because the ionization of KOA increases at high temperature.     

非离子表面活性剂液晶的线性粘弹性研究

用偏光显微镜测定了十二/十四烷基聚氧乙烯醚(C12～14EO7)/水二元体系相图的液晶区,用RS-75控制应力流变仪,在固定频率(f=0.0316Hz)时,对不同样品进行应力扫描。利用线性粘弹性区内流变参数G"与G'的比值thδ对相转变敏感的特点来确定相结构的转变,并将结果与2^HNMR结果相比较,两者吻合,这表明宏观测量手段能够反映微观相结构的变化规律。对于液晶实验结果采用弹簧-粘壶模型进行解释和讨论。     

溶剂化团簇银的制备及表征

报导了在O/W,W/O,W/O/W以及LC这些有序分子集合体中制备Ag胶体的研究成果.利用W/O/W和LC可实现用高浓度AgNO3与N2H4·H2O反应制备出10nm以下的稳定Ag粒及Ag胶体.采用紫外可见、X射线衍射、电子显微技术对胶体及银粒进行了表征.发现团簇Ag外有层状结构.通过分析指出,层状结构体现了表面活性剂、助表面活性剂的有序双分子包复.     

细菌聚γ-谷氨酸溶液流变性能的研究

用分散聚合法制备了苯乙烯 甲基丙烯酸甲酯微米级单分散共聚物微球 ,粒径为 5 4 μm .将分散聚合体系与乳液聚合体系进行了比较 ,并对共聚物微球的形貌、粒径分布及共聚情况进行了表征研究     

Spontaneous formation of Ag nanoparticles in dimethylacetamide solution of poly(ethylene glycol)

The spontaneous formation of Ag nanoparticles in a dimethylacetamide (DMAC) solution of poly(ethylene glycol) (PEG) was studied. FTIR analysis showed the formation of carbonyl groups, revealing that PEG acted as not only a protective agent but also a reducing agent in the formation of Ag nanoparticles. Since no significant reactions were observed when poly(tetramethylene glycol) (PTMG) was used to replace PEG or acetonitrile was used to replace DMAC, it was suggested that PEG molecules might be coiled to form pseudo-crown ether cavities, in which Ag complexes were bound to the oxyethylene groups and reduced, and that the use of a solvent which might appropriately solvate the Ag salt was important for the formation of Ag nanoparticles. In addition, the mean diameters of the resultant Ag nanoparticles were 3.8-9.0 nm, increasing with increasing AgNO(3) concentration. A sufficiently high PEG concentration relative to AgNO(3) was necessary for the formation of smaller Ag nanoparticles. This work provided a simple route for the in situ synthesis of Ag nanoparticles.