Photochemistry of 5-aminoquinoline in protic and aprotic solvents

Photophysical properties of 5-aminoquinoline (5AQ) have been investigated in various non-polar and polar (protic and aprotic) solvents using steady state and time resolved fluorescence. In aprotic solvents, the spectral maxima depend on the polarity. However, in protic solvents both the fluorescence intensity as well decay time show decrease depending on the hydrogen bonding ability of the solvent. The results suggest that photochemistry 5AQ is quite sensitive towards the polarity as well as protic character of the solvent.     

The styrylpyridine dye for the silane sol-gel transition studies by time-dependent fluorescence

A trans-4-(p-N,N-dimethylaminostyryl)-N-vinylbenzylpyridinium chloride (vbDMASP) fluorescence probe was optimized in ground and excited state as a function of change in the microenvironment polarity, using the Amsol HyperChem program package. In the calculations, protic and aprotic solvents were used. On this basis a change in the molecule geometry after excitation, depending on the surrounding solvent, was determined. Absorption and steady-state fluorescence spectra of vbDMASP in the solvent of different polarity and in the model water-glycerol solutions were also recorded. On the basis of Stokes' shift change with the Onsager polarity scale a change in the dipole moment of the probe during transition from ground to excited state, in protic and aprotic solvents was determined. Since during the sol-gel transition of tetraethylorthosilane in the acidic environment both polarity and viscosity of the microenvironment change the vbDMASP probe was applied and fluorescence time-resolved measurements were done. On this basis the correlations between the results of time-resolved measurements for the multichromophoric probe applied in the gelation process and molecular optimization data are discussed.     

Spectroscopic characterization of phenazinium dye aggregates in water and acetonitrile media: effect of methyl substitution on the aggregation phenomenon

Absorption, fluorescence, and fluorescence excitation spectral studies of two planar, cationic phenazinium dyes, namely, phenosafranin (PSF) and safranin-T (ST), have been performed in protic and aprotic polar solvents. The studies reveal the formation of both J- and H-aggregates in concentrated solutions. The planarity of the phenazinium skeleton and the presence of a positive charge are attributed to be the driving force for this aggregation behavior. The aggregates are established to be dimers only. The positive inductive effect of the methyl substituents in safranin-T augments the aggregation process. The experiments reveal that for both dyes, the polar protic solvent favors the aggregation process more than the aprotic solvent.     

Solvent effect on the photophysical properties of the anticancer agent ellipticine

This paper investigates how solution conditions, especially solvent polarity and hydrogen bonding, affect the fluorescence of ellipticine, a natural plant alkaloid with anticancer activity. A total of 16 solvents that cover a wide range of polarities were tested. The ultraviolet (UV) absorption and fluorescence emission of ellipticine were found to be solvent dependent. The absorption and emission maximum shifted to higher wavelengths (red shift) with increased solvent polarity. The difference in absorption and emission maximum (Stokes' shift) was large, approximately 10,000-11,000 cm-1, in polar solvents (with orientation polarizability Deltaf>0.2) but unusually small, approximately 8900 cm-1, in nonpolar solvents (hexane and cyclohexane). Large Stokes' shifts were due to an intramolecular charge transfer (ICT), which was enabled by large solvent polarity and hydrogen bonding of ellipticine with the solvents. Two transitions were found in the Lippert-Mataga plot between (1) nonpolar and semipolar solvents and between (2) semipolar and polar solvents. The first transition reflected the formation of hydrogen bonds between ellipticine and the solvents whereas the second transition indicated that ellipticine underwent an ICT. In addition, the larger extinction coefficients and the longer lifetime of ellipticine obtained in protic solvents were attributed to the formation of stronger hydrogen bonds. The photophysical response of ellipticine to changes in solvent polarity and hydrogen bond formation could be used to infer the location of ellipticine in a heterogeneous medium, namely liposomes in aqueous solution. A relatively large red shift of emission in liposomes indicated that ellipticine may be in a more polar environment with respect to the lipid bilayer, possibly close to the hydrophilic interface.     

The styrylpyridine dye for the silane sol–gel transition studies by time-dependent fluorescence

A trans-4-(p-N,N-dimethylaminostyryl)-N-vinylbenzylpyridinium chloride (vbDMASP) fluorescence probe was optimized in ground and excited state as a function of change in the microenvironment polarity, using the Amsol HyperChem program package. In the calculations, protic and aprotic solvents were used. On this basis a change in the molecule geometry after excitation, depending on the surrounding solvent, was determined.Absorption and steady-state fluorescence spectra of vbDMASP in the solvent of different polarity and in the model water–glycerol solutions were also recorded. On the basis of Stokes’ shift change with the Onsager polarity scale a change in the dipole moment of the probe during transition from ground to excited state, in protic and aprotic solvents was determined.Since during the sol–gel transition of tetraethylorthosilane in the acidic environment both polarity and viscosity of the microenvironment change the vbDMASP probe was applied and fluorescence time-resolved measurements were done. On this basis the correlations between the results of time-resolved measurements for the multichromophoric probe applied in the gelation process and molecular optimization data are discussed.     

Solute–Solvent Interactions of Methyl Violet in Different Solvents on Spectral Data

Spectroscopic studies of Methyl violet in protic (water, methanol, ethanol, isopropanol and n-butanol) and aprotic solvents (acetone, DMF) were carried out. UV-Visible absorption spectra of Methyl violet in protic solvents showed a hypsochromic shift, as the solvent polarity was changed from less polar to more polar, while a bathochromic shift was observed for aprotic solvents. Transition energy of Methyl violet in different solvents was correlated with solvatochromic parameters to study solute–solvents interactions. The Kamlet–Taft, Catalan and unified scale models were applied to investigate interactions between Methyl violet and solvents. The best agreement is found for the Catalan model.     

Photophysical properties of the 8-phenyl analogue of PM567: A theoretical rationalization

The absorption and emission spectroscopic investigations of the C-8-phenyl substituted analogue of the pyrromethene dye PM567 in various polar, non-polar as well as protic and aprotic solvents are reported. The solvatochromic shifts of the spectral bands were studied in a multitude of polar, non-polar and protic, aprotic solvents followed by a multilinear regression in which several solvent parameters were simultaneously analysed. Comparison of the experimental results with those obtained by gas phase ab initio computation with CIS, TD-HF and TD-DFT theories using 6-31G* basis set reveal an overestimation of the experimentally measured excitation parameters by all these theoretical models. However, the trends in the experimental results agree with those calculated theoretically.     

Effects of Hydrogen-bonding Interaction and Polarity on Emission Spectrum of Naphthalene-Triethylamine in Mixed Solvent

The effects of the protic and aprotic polar solvents on the emission spectrum of the naphthalene-triethyl-amine system in THF were studied under conditions of steady-state illumination. The fluorescence spectrum of the naphthalene-triethylamine system consists of two emission bands, the fluorescence band of naphthalene (band A, 329 nm) and the emission band of the exciplex(band B, 468 nm). The intensities of both the emission bands decrease with increasing the solvent polarity. The intensity of band B also decreases due to the hy-drogen-bonding interaction between triethylamine and protic solvent, while that of band A increases. It is thus suggested that the quenching of naphthalene fluorescence by triethylamine in THF occurs through the charge transfer and electron transfer reactions. The spectral changes upon the increase of solvent polarity can be explained by the dependences of the equilibrium constant between exciplex and ion-pair and the rate constant for the electron transfer reaction from triethyl.amine to the excited naphthalene on the rel.ative permittivity of solvent. It is shown that the formation of intermolecular hydrogen-bonding between triethylamine and protic solvent suppresses the quenching reaction by the decrease in free amine. Acetonitrile has only a polar effect and trichloroacetic acid only a hydrogen-bonding(or protonation) effect, while alcohols have both the effects. The effects of alcohols could be separated into the effects of solvent polarity and intermolecular hy-drogen-bonding interaction quantitatively.     

A kinetic investigation of the addition of diazomethane to styrenes. Role of dipolar aprotic solvents in predicting direction of dipole orientation

The addition of diazomethane to a series of substituted styrenes has been kinetically investigated with emphasis on polar, solvent, and solvation effects. Although the reaction is generally insensitive to solvent polarity, a sizeable substituent effect (ρ = +0.90) has been observed. Also, a sizeable increase in rate was generally observed in protic solvents such as water, and a considerable rate enhancement occurred in the case of nitrostyrene in the dipolar aprotic solvent, dimethylformamide. The results are discussed in terms of a concerted mechanism involving a partially-charged transition state II, with negative charge formation on the α-carbon of the styrene. The methoxystyrene offers an exception to the Hammett equation and the unexpectedly high rate constant for this compound could be discussed in terms of a possible participation of the highly nucleophilic resonance form of p-methoxystyrene and an α-addition via the transition state III. However, solvation effects in dimethylformamide (failure to obtain the anticipated rate increase) and the formation of a 3-substituted pyrazoline adduct from the cycloaddition reaction indicate steric control to predominate over electronic factors and β-addition to prevail unequivocally. It is proposed that solvation effects in protic solvents can be utilized to advantage in cycloaddition reactions leading to 1-pyrazolines, for which no other routes are available at the present time.     

Fluorometric study of solvation characteristics of ketocyanine dyes in mixed binary solvents

The fluorescence characteristics of two ketocyanine dyes have been studied in six mixed binary solvents. Several parameters such as the maximum energy E₁₂(F) of fluorescence, the quantum yield Φ₁₂ of fluorescence and the normalized intensity of the fluorescence have been investigated as functions of solvent composition. In protic+aprotic binary mixtures a dramatic change at the aprotic end has been observed. The results point to a preferential solvation of the solute by the protic component.     

Dynamic stokes shift and excitation wavelength dependent fluorescence of dipolar molecules in room temperature ionic liquids

Room temperature ionic liquids (RTILs) are viscous media consisting entirely of ions. Because of the complex nature of various interactions in these media, the solvent properties of the RTILs are very little understood. Since the fluorescence response of molecules comprising conjugated electron donor and acceptor groups, referred to as dipolar molecules, is one of the most frequently exploited sources of information on complex media, whose properties are largely unknown, it is possible to obtain insight into the structure and dynamics of the RTILs by studying the fluorescence behavior of dipolar solutes in these complex media. The most commonly exploited utility of a fluorescent dipolar system is in the estimation of the polarity of the media from its steady state fluorescence response. While several dipolar systems do provide estimates of the polarity of various RTILs, there can be circumstances when the steady state emission frequency of a dipolar system may not truly reflect the equilibrium solvation energy and, hence, the polarity of the medium. The fluorescence response of a dipolar system can be dependent on the excitation wavelength, an observation not commonly encountered in conventional solvents of similar polarities. On the other hand, the time-resolved fluorescence behavior of a dipolar solute in polar medium is one of the primary sources of information on the time-scale of reorganization of the solvent molecules around the photoexcited species. As the RTILs are sufficiently polar media, the time-dependent fluorescence data of the dipolar systems provide insight into the dynamics and mechanism of solvation in these media, which differ considerably from the conventional solvents. These aspects have been discussed taking into consideration the inherent absorption and fluorescence behavior of the imidazolium ionic liquids.     

Study of preferential solvation of 2,6-diaminoanthraquinone in binary mixtures by absorption and fluorescence studies

The role of solute-solvent and solvent-solvent interaction on the preferential solvation characteristics of 2,6-diaminoanthraquinone (DAAQ) has been analysed by monitoring the optical absorption and fluorescence emission spectra. Binary mixtures consist of dimethylformamide (DMF)-ethanol (EtOH), DMF-dimelthylsulfoxide (DMSO), benzene (BZ)-DMF and acetonitrile (ACN)-DMF. The optical absorption spectra maximum and emission spectra maximum of DAAQ show the changes with varying the solvents and change in the composition in the case of binary mixtures. Non-ideal solvation characteristics are observed in all binary mixtures. It is found that at certain concentrations two mixed solvents interact to form a common structure with a nu(12) (wave number in cm(-1)) value not always intermediate (nu(1) and nu(2)) between the values of the solvents mixed. Synergistic effect is observed in the case of DMF-EtOH mixtures. The preferential solvation parameters local mole fraction X(2)(L), solvation index delta(S2), exchange constant K(12) are calculated in all binary mixtures expect in the case of DMF-BZ mixture and DMF-EtOH mixture in the ground state. We have also monitored excitation wavelength effect on the probe molecule in aprotic polar and protic polar solvents.     

Kinetics and Mechanism of Monomolecular Heterolysis of Commercial Organohalogen Compounds: XXXI. Solvent Effect on the Rate of 1-Methyl-1-chlorocyclopentane Heterolysis. Correlation Analysis of Solvation Effects

Heterolysis of 1-methyl-1-chlorocyclopentane in protic and aprotic solvents occurs by the E1 mechanism. The reaction rate in aprotic solvents or in a set of protic and aprotic solvents is satisfactorily described by the parameters of the polarity and electrophilicity or ionizing power of the solvents. In protic solvents, the reaction rate grows with increasing polarity or ionizing power of the solvent and decreases with increasing nucleophilicity.     

Solvent effects in the GIAO‐DFT calculations of the 15N NMR chemical shifts of azoles and azines

The calculation of ¹⁵N NMR chemical shifts of 27 azoles and azines in 10 different solvents each has been carried out at the gauge including atomic orbitals density functional theory level in gas phase and applying the integral equation formalism polarizable continuum model (IEF‐PCM) and supermolecule solvation models to account for solvent effects. In the calculation of ¹⁵N NMR, chemical shifts of the nitrogen‐containing heterocycles dissolved in nonpolar and polar aprotic solvents, taking into account solvent effect is sufficient within the IEF‐PCM scheme, whereas for polar protic solvents with large dielectric constants, the use of supermolecule solvation model is recommended. A good agreement between calculated 460 values of ¹⁵N NMR chemical shifts and experiment is found with the IEF‐PCM scheme characterized by MAE of 7.1 ppm in the range of more than 300 ppm (about 2%). The best result is achieved with the supermolecule solvation model performing slightly better (MAE 6.5 ppm). Copyright © 2014 John Wiley & Sons, Ltd.     

Solvent polarity induced structural changes in 2,6-diamino-9,10-anthraquinone dye

Photophysical properties of 2,6-diamino-9,10-anthraquinone (2,6-DAAQ) dye have been investigated in different solvents and solvent mixtures. The fluorescence quantum yields, fluorescence lifetimes, radiative rate constants, nonradiative rate constants and absorption and fluorescence spectral characteristics show unusual deviations in the lower polarity aprotic solvents in comparison to those in other aprotic solvents of medium to higher polarities. The results indicate that the dye exists in different structural forms in the lower and in the medium to higher polarity solvents. Drawing an analogy with the results reported for other amino-substituted dyes, it is inferred that 2,6-DAAQ dye adopts a planar intramolecular charge transfer (ICT) structure in medium to higher polarity solvents, where the amino lone pairs are in good resonance with the anthraquinone pi-cloud. In the lower polarity solvents, however, the dye is inferred to exist in a nonplanar structure where the amino lone pairs are not in good resonance with the anthraquinone pi-cloud. Due to these structural differences, the dye displays significantly different photophysical behavior in the lower polarity solvents than in the other solvents of medium to higher polarities. Supportive evidence for the above structural changes has been obtained from ab initio quantum chemical calculations on the structures of the dye under different conditions. Unusual deviations in the photophysical properties of 2,6-DAAQ dye in protic solvents in comparison to those in aprotic solvents of similar polarities are attributed to the intermolecular hydrogen bonding effect involving the OH groups of the protic solvents and the quinonoid oxygens of the dye.     

Photophysical Properties of 4′-(p-aminophenyl)-2,2′:6′,2′′-terpyridine

Spectral and photophysical investigations of 4′-(p-aminophenyl)-2,2′:6′,2′′-terpyridine (APT) have been performed in various solvents with different polarity and hydrogen-bonding ability.The emission spectra of APT are found to exhibit dual fluorescence in polar solvents, which attributes to the local excited and intramolecular charge transfer states, respectively. The two-state model is proven out for APT in polar solvent by the time-correlated single photon counting emission decay measurement. Interestingly, the linear relationships of different emission maxima and solvent polarity parameter are found for APT in protic and aprotic solvents, because of the hydrogen bond formation between APT and alcohols at the amino nitrogen N25. Furthermore, the effects of the complexation of the metal ion with tpy group of APT and the hydrogen bond formation between APT with methanol at the terpyridinenitrogen N4—N8—N14 are also presented. The appearance of new long-wave absorption and fluorescence bands indicates that a new ground state of the complexes is formed.     

Photophysics of representative ketocyanine dyes: dependence on molecular structure

Spectral properties of a new fluorescent ketocyanine dye have been discussed. The energy of maximum absorption/fluorescence of the dye exhibits bathochromic shift with increasing polarity of the medium. Both dipolarity-polarisability and hydrogen bond donation interaction contribute to solvation of the dye. Study of fluorescence parameters points to existence of different emitting states of the dye for aprotic and protic solvents. While the emitting state is the (1)(π, π*) state for aprotic solvents, fluorescence supposedly take place from a different emitting state involving H-bond formation in the excited state in protic solvents. Fluorescence parameters of the dye have been compared with those for a structurally similar symmetric ketocyanine dye. The faster decay of the dye relative to its symmetric counterpart has been explained as due to an increase of nonradiative decay.     

Studies of solvation of ketocyanine dyes in homogeneous and heterogeneous media by UV/Vis spectroscopic method

Solvation characteristics of ketocyanine dyes (I-VI) have been investigated in pure solvents and heterogeneous media by absorption and fluorescence studies. The dyes are good reporters of solvent polarity. In protic solvents they exist as equilibrium mixtures of bare and hydrogen-bonded form in the ground state (S0), the latter being the emitting species. In aprotic solvents of low polarity association of the S1 state of the dye takes place. In aqueous micellar media the dye resides at the micelle water interface. The binding constant for dye-micelle interaction has been determined. Fluorescence data in beta-cyclodextrine solution resemble that for that neutral micellar solution indicating that the interaction between the -OH group of the heterogeneous part (micelle/cyclodextrine cavity) and the carbonyl oxygen of the dye is important in both the cases.     

Solvent interactions in the allylation of piperidine

The reaction between allylbromide and piperidine has been studied in different protic and aprotic solvents. The reaction is first order with respect to [allylbromide] and [piperidine]. A correlation analysis of the rate data with solvent properties shows that polarity (Y), polarizability (P), and electrophilicity (E) of the solvent simultaneously influence the rate of reaction. From the regression analysis, information regarding the relative solvation of the reactants and the activated complex is obtained and a solvation model is proposed. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 421–425, 2009