碳纳米管中点缺陷对热导率影响的正交试验模拟分析

在碳纳米管的制备过程中, 各种点缺陷不可避免地存在于其晶格结构中, 对于碳管的热输运性质造成不可忽视的影响. 使用非平衡分子动力学方法, 选用反应经验键序势能, 模拟计算含有缺陷的碳纳米管的热导率. 尝试采用正交试验方法设计算例, 不但减少了计算量, 并且利于分析缺陷类型、 管长和管径三种结构因素对缺陷造成的热导率下降影响的主次和趋势. 重点研究了掺杂、 吸附和空位三类点缺陷的影响, 与无缺陷完整碳纳米管进行比较, 开展缺陷效应分析, 并进一步考察了环境温度等因素的影响. 模拟结果表明, 相对完整无缺陷碳管, 含有点缺陷的碳管热导率显着下降; 在有缺陷存在的情况下, 缺陷的类型对碳管热导率的影响最大, 管径次之, 管长影响相对最小; 缺陷类型对热导率影响力从大到小依次为: 空位 > 掺杂 > 吸附; 不同环境温度下, 点缺陷对碳管热导率的影响不尽相同.     

缺陷对单壁碳纳米管熔化与预熔化的影响

利用分子动力学模拟研究了具有几种常见缺陷的单壁碳纳米管的熔化与预熔化性质. 研究结果表明, 类似于纳米颗粒和聚合物, 碳纳米管发生熔化时的Lindemann指数为003, 远低于晶体熔化的判据01—015 使用Lindemann指数, 得出标准碳纳米管的熔化温度为4800K左右, 而带缺陷的碳纳米管的熔化总是从缺陷处开始, 并且缺陷会影响碳纳米管局部的熔化温度, 导致局部预熔化. Stone-Wales缺陷在2600K引起碳纳米管的局部熔化,空位缺陷导致的局部熔化温度在3200K, 而具有硅替位缺陷的碳纳米管在3800K以下具有很好的热稳定性. 关键词： 熔化 预熔化 缺陷 碳纳米管     

Stone-Wales defects can cause a metal-semiconductor transition in carbon nanotubes depending on their orientation

It has been shown that the two different orientations of Stone-Wales (SW) defects, i.e. longitudinal and circumferential SW defects, on carbon nanotubes (CNTs) result in two different electronic structures. Based on density functional theory we have shown that the longitudinal SW defects do not open a bandgap near the Fermi energy, while a relatively small bandgap emerges in tubes with circumferential defects. We argue that the bandgap opening in the presence of circumferential SW defects is a consequence of long-range symmetry breaking which can spread all the way along the tube. Specifically, the distribution of contracted and stretched bond lengths due to the presence of defects, and hopping energies for low-energy electrons, i.e. the 2p(z) electrons, show two different patterns for the two types of defects. Interplay between the geometric features and the electronic properties of the tubes have also been studied for different defect concentrations. Considering π-orbital charge density, it has also been shown that the deviations of bond lengths from their relaxed length result in different doping for two defect orientations around the defects-electron-rich for a circumferential defect and hole-rich for a longitudinal one. We have also shown that, in the tubes having both types of defects, circumferential defects would dominate and impose their electronic properties.     

Thermal conductivity for single-walled carbon nanotubes from Einstein relation in molecular dynamics

Equilibrium molecular dynamics based Einstein relation with an appropriate definition for integrated heat current (i.e., with modified energy moment) are combined to quantify the thermal conductivity of individual single-walled carbon nanotubes, armchair, zigzag and chiral tubes. The thermal conductivity has been investigated as a function of three parameters, tube radius, length and chirality at and near room temperature with Brenner potential model. Thermal conductivity is found to have unusually high value and varies with radius, length and chirality of tubes. Also the thermal conductivity at temperature range from 50 to 100 K is found to have a maximum value. For 12.1 nm tube length, the thermal conductivity has converging trend which its value dependents on the tube radius and chirality. Tubes with large radius have lower values of thermal conductivity. Furthermore, the results show that armchair tubes have large values of the thermal conductivity comparing with zigzag and chiral tubes. It seems possible to uncover carbon nanotubes thermal properties based on measurements having heat dependence by adding another methods for calculations.     

Studies on structural defects in carbon nanotubes

Structural defects in carbon nanotubes (CNTs) have been paid much attention, because they influence the properties of the CNTs to some extent. Among various defects in CNTs, both single vacancies and Stone-Wales (SW) defects are the simple and common ones. In this paper, we review the progress of research in these two kinds of defects in CNTs. For single vacancies, we first address their different structural features in both zigzag and armchair CNTs, and their stabilities in CNTs with different sizes and different symmetries systematically. The presence of the single vacancies in CNTs not only influences the electronic structures of the systems, but also affects the vibrational properties of the tubes. Nevertheless, being active chemically, the single vacancies in the tubes prefer to interact with adsorbates nearby, of which the interaction of the defects with hydrogen atom, hydrogen molecule and some small hydrocarbon radicals (-CH, -CH₂ and -CH₃) are discussed. The former is associated with H storage and the latter is of merit to improve the local structure of the defect in a CNT. For the Stone-Wales defect, we mainly focus on its stability in various CNTs. The influence of the SW defects on the conductance of CNTs and the identification of such a defect in CNT is described in brief.      

Effects of vacancy defects and axial strain on thermal conductivity of silicon nanowires: A reverse nonequilibrium molecular dynamics simulation

Thermal conductivity of silicon nanowires (SiNWs) is evaluated using the reverse nonequilibrium molecular dynamics simulation. The Stillinger–Weber (SW) and Tersoff interatomic potentials are employed to simulate thermal conductivity of SiNWs. In this work, the influence of random vacancy defects, axial strain, temperature and length on thermal conductivity and effective mean free path of SiNWs is investigated. It is found that by raising the percent of random vacancy defects, thermal conductivity of SiNWs decreases linearly for the results obtained form SW potential and nonlinearly for those obtained from Tersoff interatomic potential. Dependence of the thermal conductivity on axial strain is also studied. Results show that thermal conductivity increases as compressive strain increases and decreases as tensile strain increases. Influence of temperature is also predicted. It is found that the thermal conductivity of SiNWs decreases with increasing the mean temperature. Most of the simulations are performed for 4 UC×4 UC×40 UC silicon nanowires using ssp boundary condition.     

拓扑缺陷对单壁碳纳米管电子结构及其光学光谱的影响

应用密度泛函理论计算了半导体型单壁碳纳米管(7,0)和(8,0)以及其发生镜像对称和非镜像对称Stone-Wales形变、形成异质结(7,0)—(8,0)情况下的能带结构、吸收光谱、反射光谱,并对计算结果进行了比较。研究发现： 引入拓扑缺陷态后,碳纳米管的能带结构发生了明显的变化,费米能级在不同缺陷情况下移动方向不一致;碳管的吸收和反射明显减弱且吸收峰和反射峰在低能区发生红移现象;在光子能量约为E=13 eV处各碳管的吸收谱和反射谱中均出现一特征峰,并且在引入缺陷以后该特征峰向高能区移动。文章对计算结果进行了分析和探讨,可望利用这种拓扑缺陷的引入而产生的光电特性来设计碳管光电器件。     

Carbon ad-dimer defects in carbon nanotubes

The adsorption of carbon dimers on carbon nanotubes leads to a rich spectrum of structures and electronic structure modifications. Barriers for the formation of carbon dimer induced defects are calculated and found to be considerably lower than those for the Stone-Wales defect. The electronic states introduced by the ad-dimers depend on defect structure and tube type and size. Multiple carbon ad-dimers provide a route to structural engineering of patterned tubes that may be of interest for nanoelectronics.     

Theoretical explorations on the armchair BN nanotube with defects

A systematic study of armchair boron nitride nanotubes (BNNTs) with defects has been carried out within density functional theory. The effect brought by the defects is localized. The defect sites have major contribution to the frontier molecular orbital and change the conductivity of the BNNTs. The defect sites are reactive centers. The substitution of boron with carbon enhances the field emission of the tubes. Doping or vacancy defect creates active center on nanotubes, thus broadening the applications of nanotubes in chemistry and material sciences through functionalization.     

Nonequilibrium Green's function approach to phonon transport in defective carbon nanotubes

We have developed a new theoretical formalism for phonon transport in nanostructures using the nonequilibrium phonon Green's function technique and have applied it to thermal conduction in defective carbon nanotubes. The universal quantization of low-temperature thermal conductance in carbon nanotubes can be observed even in the presence of local structural defects such as vacancies and Stone-Wales defects, since the long wavelength acoustic phonons are not scattered by local defects. At room temperature, however, thermal conductance is critically affected by defect scattering since incident phonons are scattered by localized phonons around the defects. We find a remarkable change from quantum to classical features for the thermal transport through defective carbon nanotubes with increasing temperature.     

Effects of various defects on the electronic properties of single-walled carbon nanotubes: A first principle study

The geometries,formationenergies and electronic band structures of （8, 0） and （14, 0） singlewailed carbon nanotubes （SWCNTs） with various defects, inehlding vaeaney, Stone-Wales defect, and octagon pentagon pair defect, have been investigated within the framework of the density- huictional theory （DFT）, and the influence of the concentration within the same style of deflect on the physical and chenfical properties of SWCNTs is also studied. The results suggest that the existeilcc of vacancy and octagon-pentagon pair deflect both reduce the band gap, whereas the SW- defect induces a band gap opening in CNTs. More int, erestingly, the band gaps of （8, 0） and （14, 0） SWCNTs eonfigurations with two octagon pentagon pair defect presents 0.517 eV and 0.163/eV, which arc a little smaller than the perfectt CNTs. Furthermore, with the concentration of defects increasing, there is a decreasing of band ga.p making the two types of SWCNTs change from a semiconductor to a metallic conductor.     

单、双原子空位缺陷对扶手椅型单层碳纳米管屈曲性能的不同影响

采用分子动力学方法,对完善和含缺陷扶手椅型单层碳纳米管进行轴向压缩的数值模拟,对比研究三种不同的温度环境下单、双原子空位缺陷对碳纳米管轴压变形性能的特殊影响.研究结果表明管壁缺陷显著降低了纳米管低温时的承载能力,由于单原子空位缺陷造成的特殊应力集中效应会引发纳米管过早发生局部屈曲,单原子缺陷管的屈曲强度反而小于双原子管的屈曲强度. 关键词： 分子动力学 碳纳米管 屈曲 缺陷     

碳纳米管负载矾的第一性原理研究

本文基于密度泛函第一性原理研究了原始和带有缺陷的(Stone-Wales缺陷和单空位缺陷)碳纳米管负载金属V的稳定构型.对于V吸附在原始碳纳米管(CNT)上时,V在内表面的吸附比外表面的吸附有更强的相互作用力,且六元环内表面结构最稳定.当V与Stone-Wales缺陷碳纳米管相互作用时,V原子易吸附在管外七元环C-C键的外表面和内表面处,这说明缺陷位置的有效结合使之局域化加强.而以单空位缺陷碳纳米管为载体时V最易吸附在外缺陷处,相当于碳纳米管的一个C被金属V原子取代,形成了3个V-C_(sur)键,这进一步表明SV管外吸附比管内吸附更容易.我们从上述三种构型载体中发现,金属V吸附在缺陷碳纳米管时的稳定性要优于原始碳纳米管,且SV缺陷对金属V的固定效果最好.     

The effects of vacancy defects and nitrogen doping on the thermal conductivity of armchair (10, 10) single-wall carbon nanotubes

The influence of vacancy defects and nitrogen doping on the thermal conductivity of typical armchair (10, 10) single-walled carbon nanotubes is investigated using molecular dynamics (MD) simulation. The second-generation reactive empirical bond order potential and Tersoff potential are used to describe the interatomic interactions and the thermal conductivities are calculated using the Müller-Plathe approach (also called non-equilibrium MD simulation). Vacancy defects decrease the thermal conductivity whereas the substitution of nitrogen at vacancy sites improves the thermal conductivity. Quantum correction of the calculated results produces a thermal conductance temperature dependence that is in qualitative agreement with experimental data.     

Study of titanium adsorption on perfect and defected BC3 nanotubes using density functional theory

Density functional theory calculations were used to study the titanium (Ti) adsorption on perfect and defected (4, 0) BC₃ nanotubes, considering Stone–Wales and vacancy defects. The binding energy values for these nanotubes were larger than the corresponding values for carbon nanotubes. The charge transfer from the Ti atom to nanotube was observed for all systems studied. The most exothermic binding process occurred for the Ti adsorption on a native V_B defect, which showed minimum structural deformation with respect to a perfect BC₃ tube. In the case of a nanotube with a reconstructed carbon vacancy, the adsorption of Ti generated a half-metallic anti-ferromagnet. The results obtained in this paper are relevant for spintronics and hydrogen adsorption applications.     

含氮SW缺陷对单壁碳纳米管电子结构和光学性质的影响

应用第一性原理密度泛函理论研究了单壁碳纳米管中Stone-Wales(SW)缺陷和氮掺杂情况下的电子结构和光学性质.研究发现,含氮SW缺陷单壁碳纳米管体系的总能降低,结合更稳定,且在费米能级附近出现一条半满的杂质带,并且随着氮掺杂位置的不同,掺杂能态出现显著差异.碳管的吸收和反射明显减弱且吸收峰和反射峰在低能区发生红移现象,在能量小于11eV附近均出现杂质特征峰.本文对计算结果进行了分析研究,可望为含氮SW缺陷碳管在光电材料中的应用提供理论依据. 关键词： 单壁碳纳米管 Stone-Wales缺陷 氮掺杂 光学性质     

Metastable Frenkel pair defect in graphite: source of Wigner energy?

The atomic processes associated with energy storage and release in irradiated graphite have long been subject to untested speculation. We examine structures and recombination routes for interstitial-vacancy (I-V) pairs in graphite. Interaction results in the formation of a new metastable defect (an intimate I-V pair) or a Stone-Wales defect. The intimate I-V pair, although 2.9 eV more stable than its isolated constituents, still has a formation energy of 10.8 eV. The barrier to recombination to perfect graphite is calculated to be 1.3 eV, consistent with the experimental first Wigner energy release peak at 1.38 eV. We expect similar defects to form in carbon nanostructures such as nanotubes, nested fullerenes, and onions under irradiation.     

Matlab编程的Hückel分子轨道法计算研究掺杂纳米碳管的化学反应性

使用Matlab自编简单Hückel分子轨道法（SHMO）计算程序,分析空位、Stone-Wales缺陷位、N和B原子掺杂的CNT（5,5）碳纳米管,计算π电子密度和前线分子轨道（HOMO和LUMO）为研究掺杂相对碳纳米管的化学反应性提供依据.具有不同电特性的掺杂相打破了碳纳米管的π电子、HOMO和LUMO的均衡分布.掺杂相和/或邻近的碳原子为HOMO或LUMO贡献了较其它原子更大的轨道系数,在不同的化学反应中表现出良好的亲核性或亲电性.此外,HOMO-LUMO能量差很好地反映了掺杂纳米碳管的导电性.计算结果与已报道的实验和理论结果吻合良好.     

基于分子动力学的石墨炔纳米带空位缺陷的导热特性

空位缺陷石墨炔比完整石墨炔更贴近实际材料,而空位缺陷的多样性可导致更丰富的导热特性,因此模拟各种空位缺陷对热导率的影响显得尤为重要.采用非平衡分子动力学方法,通过在纳米带长度方向上施加周期性边界条件,基于AIREBO(adaptive intermolecular reactive empirical bond order)势函数描述碳-碳原子间的相互作用,模拟了300 K时单层石墨炔纳米带乙炔链上单空位缺陷和双空位缺陷以及苯环上单空位缺陷对其热导率的影响,利用Fourier定律计算热导率.模拟结果表明,对于几十纳米尺度范围内的石墨炔纳米带热导率,1)由于声子的散射集中和声子倒逆过程增强,与完美无缺陷的石墨炔纳米带相比,空位缺陷会导致石墨炔纳米带热导率的下降;2)由于声子态密度匹配程度高低的不同,相比于乙炔链上的空位缺陷,苯环的空位缺陷对石墨炔纳米带热导率影响更大,乙炔链上空位缺陷数量对石墨炔纳米带热导率的影响明显;3)由于尺寸效应问题,随着长度增加,石墨炔纳米带热导率会相应增大.本文的研究可为在一定尺度下进行石墨炔纳米带热导率的调控问题提供参考.     

碳纳米管电缆式复合材料的热导率

通过非平衡分子动力学方法, 对单壁碳管填充金纳米线的碳纳米管电缆式复合材料开展热导率的模拟分析. 采用Tersoff势函数描述碳-碳原子间的相互作用, Lennard-Jones长程作用势描述碳-金原子间的相互作用, 嵌入原子势函数描述金-金原子间相互作用. 研究结果表明: 相同尺寸下, 金纳米线的电子热导率相较于空碳管以及电缆式复合材料的声子热导率小很多, 对复合材料总热导率的贡献可以忽略; 由于管内金纳米线的存在, 其与碳管的相互作用使得碳管碳原子倾向于沿着轴向振动, 声子间U散射随之减少, 声子平均自由程增加, 导致复合材料热导率明显大于空碳管, 在100–500 K温度范围内高出约20%–45%, 但增大幅度随温升呈降低趋势; 复合材料热导率随着管长增加而增大, 变化趋势和空碳管相似, 但其增长幅度更大; 复合材料和空碳管的热导率随管径增大而减小, 且变化幅度基本一致. 关键词： 碳纳米管 纳米线 电缆式复合材料 导热