Influence of nanomechanical force on the electronic structure of InAs/GaAs quantum dots

We show nanomechanical force is useful to dynamically control the optical response of self-assembled quantum dots, giving a method to shift electron and heavy hole levels, interval of electron and heavy hole energy levels, and the emission wavelength of quantum dots (QDs). The strain, the electron energy levels, and heavy hole energy levels of InAs/GaAs(001) quantum dots with vertical nanomechanical force are investigated. Both the lattice mismatch and nanomechanical force are considered at the same time. The results show that the hydrostatic and the biaxial strains inside the QDs subjected to nanomechanical force vary with nanomechanical force. That gives the control for tailoring band gaps and optical response. Moreover, due to strain-modified energy, the band edge is also influenced by nanomechanical force. The nanomechanical force is shown to influence the band edge. As is well known, the band offset affects the electronic structure, which shows that the nanomechanical force is proven to be useful to tailor the emission wavelength of QDs. Our research helps to better understand how the nanomechanical force can be used to dynamically control the optics of quantum dots.     

Finite element analysis of stress and strain distributions in InAs/GaAs quantum dots

In this paper, we perform systematic calculations of the stress and strain distributions in InAs/GaAs truncated pyramidal quantum dots (QDs) with different wetting layer (WL) thickness, using the finite element method (FEM). The stresses and strains are concentrated at the boundaries of the WL and QDs, are reduced gradually from the boundaries to the interior, and tend to a uniform state for the positions away from the boundaries. The maximal strain energy density occurs at the vicinity of the interface between the WL and the substrate. The stresses, strains and released strain energy are reduced gradually with increasing WL thickness. The above results show that a critical WL thickness may exist, and the stress and strain distributions can make the growth of QDs a growth of strained three-dimensional island when the WL thickness is above the critical value, and FEM can be applied to investigate such nanosystems, QDs, and the relevant results are supported by the experiments.     

Strain distributions and electronic structure of three-dimensional InAs/GaAs quantum rings

This paper presents a finite element calculation for the electronic structure and strain distribution of self-organized InAs/GaAs quantum rings. The strain distribution calculations are based on the continuum elastic theory. An ideal three-dimensional circular quantum ring model is adopted in this work. The electron and heavy-hole energy levels of the InAs/GaAs quantum rings are calculated by solving the three-dimensional effective mass Schr?dinger equation including the deformation potential and piezoelectric potential up to the second order induced by the strain. The calculated results show the importance of strain and piezoelectric effects, and these effects should be taken into consideration in analysis of the optoelectronic characteristics of strain quantum rings.     

The influences of thickness of spacing layer and the elastic anisotropy on the strain fields and band edges of InAs/GaAs conical shaped quantum dots

Based on the continuum elastic theory, this paper presents a finite element analysis to investigate the influences of elastic anisotropy and thickness of spacing layer on the strain field distribution and band edges (both conduction band and valence band) of the InAs/GaAs conical shaped quantum dots. To illustrate these effects, we give detailed comparisons with the circumstances of isolated and stacking quantum dot for both anisotropic and isotropic elastic characteristics. The results show that, in realistic materials design and theoretical predication performances of the optoelectronic devices, both the elastic anisotropy and thickness of the spacing layer of stacked quantum dot should be taken into consideration.     

应变补偿层对量子点生长影响的理论研究

量子点的光学特性与量子点的大小均匀性、密度、内部应变以及隔离层的厚度等有密切关系.文中从理论角度定量研究了GaNXAs1-X应变补偿层对InAs/GaAs量子点生长质量的改善作用,分析了应变补偿层对隔离层厚度减小的作用.讨论了应变补偿层的补偿位置和补偿层N组分X对量子点生长时局部应变和体系应变的补偿作用.分析了应变补偿层对体系应变的减少作用,并计算了相邻层量子点的垂直对准概率.研究结果对实验中应变补偿的优化和高质量量子点阵列的生长实现提供了理论依据.     

GaSb/GaAs复合应力缓冲层上自组装InAs量子点的生长

研究了GaSb/GaAs复合应力缓冲层上自组装生长的InAs量子点.在2ML GaSb/1ML GaAs复合应力缓冲层上获得了高密度的、沿［100］方向择优分布量子点.随着复合应力缓冲层中GaAs层厚度的不同,量子点的密度可以在1.2×10¹⁰cm^-2和8×10¹⁰cm^-2进行调控.适当增加GaAs层的厚度至5ML,量子点的发光波长红移了约25nm,室温下PL光谱波长接近1300nm. 关键词： 自组装量子点 分子束外延 Ⅲ-Ⅴ族化合物半导体     

Long wavelength InAs self-assembled quantum dots embedded in GaNAs strain-compensating layers

We investigated the effect of GaNAs strain-compensating layers (SCLs) on the properties of InAs self-assembled quantum dots (QDs) grown on GaAs (0 0 1) substrates. The GaNAs material can be used as SCL thereby minimizing the net strain, and thus is advantageous for multi-stacking of InAs QDs structures and achieving long wavelength emission. The emission wavelength of InAs QDs can be tuned by changing the nitrogen (N) composition in GaNAs SCLs due to both effects of strain compensation and lowering of potential barrier height. A photoluminescence emission at 77 K was clearly observed for sample with GaN_0.024As_0.976 SCL. Further, we observed an improvement of optical properties of InAs QDs by replacing the more popular GaAs embedding layers with GaNAs SCLs, which is a result of decreasing non-radiative defects owing to minimizing the total net strain.     

隔离层厚度和盖层厚度对InAs/GaAs量子点应变分布和发射波长的影响

分析了量子点盖层生长过程中隔层厚度对应变分布的影响,指出隔层材料的纵向晶格常数与量子点材料的纵向晶格常数对应变分布具有重要意义.定性说明了应变因素在隔离层生长过程中对量子点高度塌陷产生的影响.讨论了当隔离层顶面与量子点高度持平后,增加盖层厚度对应变分布的影响.基于变形势理论,讨论了上述几何参数的变化对发光波长的影响,并与实验结果进行了对比.结果表明,在量子点加盖过程中,应变因素对其形貌和发光特性具有重要作用,以应变工程为基础的发射波长调控是拓展量子点波长发射范围的有效途径. 关键词： 应变工程 半导体量子点 隔离层 盖层     

Effects of Si-doped GaAs layer on optical properties of InAs quantum dots

We have investigated the optical properties of InAs self-assembled quantum dots (SAQDs) with the Si-doped GaAs barrier layer. Two types of samples are fabricated according to the position of the Si-doped GaAs layer. For type A samples the Si-doped GaAs layer is grown below the QDs, whereas for type B samples the Si-doped GaAs layer is grown above the QDs. For both types of samples the excited-state emissions caused by state filling are observed in photoluminescence (PL) spectra at high excitation power densities. The bandgap renormalization of QDs can be found from the shift of the PL peak energy. Particularly, for type A samples the Si atoms act as nucleation centers during the growth of InAs QDs on the Si-doped GaAs layer and affect the density and the size of the QDs. The Si-doped GaAs layer in type A samples has more effects on the properties of QDs, such as state filling and bandgap renormalization than those of type B samples.     

Broadband light emitting from multilayer-stacked InAs/GaAs quantum dots

We report the effect of the GaAs spacer layer thickness on the photoluminescence(PL) spectral bandwidth of InAs/GaAs self-assembled quantum dots(QDs).A PL spectral bandwidth of 158 nm is achieved with a five-layer stack of InAs QDs which has a 11-nm thick GaAs spacer layer.We investigate the optical and the structural properties of the multilayer-stacked InAs/GaAs QDs with different GaAs spacer layer thicknesses.The results show that the spacer thickness is a key parameter affecting the multi-stacked InAs/GaAs QDs for wide-spectrum emission.     

Theoretical study of quantum confined Stark shift in InAs／GaAs quantum dots

The quantum confined Stark effect (QCSE) of the self-assembled InAs/GaAs quantum dots has been investigated theoretically. The ground-state transition energies for quantum dots in the shape of a cube, pyramid or “truncated pyramid” are calculated and analysed. We use a method based on the Green function technique for calculating thestrain in quantum dots and an efficient plane-wave envelope-function technique to determine the ground-state electronic structure of them with different shapes. The symmetry of quantum dots is broken by the effect of strain. So the properties of carriers show different behaviours from the traditional quantum device. Based on these results, we also calculate permanent built-in dipole moments and compare them with recent experimental data. Our results demonstrate that the measured Stark effect in self-assembled InAs/GaAs quantum dot structures can be explained by including linear grading.     

Frequency-dependent C(V) spectroscopy of the hole system in InAs quantum dots

The hole system in InAs quantum dots was investigated by frequency-dependent capacitance–voltage spectroscopy. Up to eight distinct charging peaks could be observed and the energy difference between the individual peaks could be estimated. All charging peaks decrease with increasing measurement frequency; however, the lower the energy of the hole level the stronger the decrease. A comparison with the results of the electron system in similar quantum dots yields that for all hole levels the effective mass in the barrier is much larger than in the electron system.     

Size dependence of biexciton binding energy in single InAs/GaAs quantum dots

This paper studies the size dependence of biexciton binding energy in single quantum dots (QDs) by using atomic force microscopy and micro-photoluminescence measurements. It finds that the biexciton binding energies in the QDs show ``binding' and ``antibinding' properties which correspond to the large and small sizes of QDs, respectively. The experimental results can be well interpreted by the biexciton potential curve, calculated from the exciton molecular model and the Heitler--London method.     

Raman study of InAs quantum dots on GaAs/InP grown by low pressure metal-organic chemical vapor deposition

Raman spectra of InAs quantum dots (QDs) on InP substrate were investigated. Both longitudinal-optic (LO) and transverse-optic (TO) frequency of InAs QDs showed a large blue-shift comparing to its bulk due to the compressive strain in InAs QDs. Raman scattering of InAs QDs with a thin GaAs interlayer was studied. We obtained that the peak position of LO and TO mode of InAs QDs became larger blue-shifted when we inserted the GaAs layer. At the same time, we found a red-shift of the frequency of GaAs LO mode because of tensile strain. Theoretical calculation was performed and its prediction coincided with our experiment results well. They both showed that strain played an important role in formation of InAs QDs.     

Studying the mechanism of ordered growth of InAs quantum dots on GaAs/InP

We study the mechanism of ordered growth of InAs quantum dots (islands) on a GaAs/InP substrate in theory and point out that the tensile strain can be used to control InAs/InP self-assembled quantum dots arrangement. Photoluminescence spectrum, and atomic force microscopy images have been investigated. In the experiment, ordered InAs islands have been obtained and the maximum density of quantum dots is 1.6×10¹⁰ cm⁻² at 4 monolayers InAs layer.     

Resonant photoluminescence from modulation-doped InAs –GaAs quantum dots

Resonant luminescence studies of InAs quantum dots (QDs) embedded in a GaAs matrix grown by molecular beam epitaxy are presented, showing marked differences for modulation-doped and undoped QDs and indicating that the doping leads to different exciton formation and carrier relaxation mechanisms. The LO-phonon assisted relaxatioin of excitons between sub-levels is identified for the modulation-doped QDs.     

参杂GaAs量子点的电子结构

用有效质量近似和少体物理方法计算了在抛物势中,参杂（一个带正电荷）GaAs量子点中有7个极化电子时的本征能量和本征波函数,并从本征波函数中提取的一体、二体密度函数方法得到了电子结构的直观图像,用对称性对量子点中库仑相互作用能和电子结构进行了分析。     

不同盖层对InAs/GaAs量子点结构和光学性质的影响

利用金属有机化合物气相沉积设备生长了不同盖层结构的InAs/GaAs量子点,采用原子力显微镜和光致发光光谱仪对量子点的结构和光学性质进行了研究.量子点层之间的盖层由一个低温层和一个高温层组成.对不同材料结构的低温盖层的对比研究表明,In组分渐变的InGaAs低温盖层有利于改善量子点均匀性、减少结合岛数目、提高光致发光强度;当组分渐变InGaAs低温盖层厚度由6.8 nm增加到12 nm,发光波长从1256.0 nm红移到1314.4 nm.另外,还对不同材料结构的高温盖层进行了对比分析,发现高温盖层采用In组分渐变的InGaAs材料有利于光致发光谱强度的提高. 关键词： 半导体量子点 盖层 组分渐变     

InAs/GaAs量子点的静压光谱压力系数研究

采用有效质量模型和非线性弹性理论计算了不同尺寸InAs/GaAs量子点的静压光谱发光峰的 压力系数(PC).量子点峰位随压力的变化主要来自禁带宽度和电子束缚能随压力变化两方面 的贡献.由于InAs/GaAs量子点是一个应变体系，体系的晶格常数，失配应变和弹性系数均随 外加压力变化，使得加压后量子点的禁带宽度相对于非应变体系略有减小，同时势垒高度增 加，电子束缚程度增加.两者共同作用引起的InAs应变层的禁带宽度压力系数减小是导致量 子点的压力系数小于InAs体材料的主要原因.同时计算结果表明，电子束缚能随压力变化对 不同尺寸量子点的压力系数的影响不同，量子点尺寸越小，受其影响越大，压力系数也越大 . 关键词： 量子点 压力系数 应变     

Piezoelectric effects and electronic structures of InAs/GaAs quantum dots grown along (111) and (011) directions

Piezoelectric effects and electronic structures of InAs/GaAs quantum dots grown along (111) and (011) directions are investigated in this paper. The finite element method is used. Electronic energy levels are calculated by solving the three-dimensional effective mass Schr?dinger equation including a strain modified confinement potential and piezoelectric effects. The difference in electronic structure between quantum dots grown along the (111) direction and the (011) direction are compared. The cubic and truncated pyramidal shaped quantum dots are adopted.