Extractive spectrophotometric determination of tungsten(VI) in alloy steels using ethopropazine hydrochloride.

Ethopropazine hydrochloride (EPH) has been proposed as a sensitive reagent for the spectrophotometric determination of tungsten(VI). The method is based on the formation of a chloroform-soluble yellow-colored ternary complex by the interaction of EPH and thiocyanate with tungsten(V). The complex exhibits the absorption maximum at 404 nm with Sandell's sensitivity value of 20.03 ng cm-2. The complex obeyed Beer's law in the concentration range of 1-15 micrograms ml-1 with an optimum concentration range of 2.3-12.9 micrograms ml-1. The effects of foreign ions in the determination of tungsten(VI) were investigated. The method has also been successfully applied to the analysis of alloy steels.     

溴酸钾氧化酸性铬深蓝催化动力学极谱法测定痕量钒

在0.15mol·L~(-1)H_2SO_4介质中,以酒石酸作活化剂,Ⅴ(Ⅴ)对溴酸钾氧化酸性铬深蓝的反应具有强烈的催化作用,以极谱法监测催化反应过程中酸性铬深蓝浓度的变化,建立了测定痕量钒的催化动力学新方法。钒的线性范围为0.10～7.0ng·ml~(-1),检出限为0.05ng·ml~(-1),应用于人发中痕量钒的测定,结果满意。并对酸性铬深蓝的极谱特性进行了初步的探讨。     

Spectrophotometric determination of certain cephalosporins using molybdophosphoric acid. Part II. Determination of cefadroxil, cefapirin, ceforanide and cefuroxime

The use of molybdophosphoric acid as an oxidising agent for the spectrophotometric determination of four cephalosporin derivatives, viz., cefadroxil monohydrate (I), cefapirin sodium (II), ceforanide L-lysine (III) and cefuroxime sodium (IV), either in the pure form or in pharmaceutical formulations is described. Beer's law is obeyed up to 100 micrograms ml-1 for I, up to 60 micrograms ml-1 for II and IV and up to 80 micrograms ml-1 for III. The molar absorptivities were 4.58 X 10(3), 11.3 X 10(3), 9.8 X 10(3) and 10.9 X 10(3) l mol-1 cm-1 and the Sandell sensitivities were 83.3, 39.3, 53.0 and 41.0 ng cm-2 for I, II, III and IV, respectively. The slopes and intercepts of the equations of the regression line were calculated for each of these drugs with the following correlation coefficients: I, 0.9993; II, 0.9999; III, 1.000; and IV, 0.9999. These antibiotics were determined successfully both in the pure form and in pharmaceutical preparations. The results demonstrated that the proposed procedure is at least as accurate, precise and reproducible as the official methods, while being simpler and less time consuming. A statistical analysis indicated that there was no significant difference between the results obtained by the proposed procedure and those of the official methods.     

Fluorimetric determination of aluminium in serum

A convenient fluorimetric method for the routine determination of aluminium in serum has been developed using lumogallion [4-chloro-3-(2,4-dihydroxyphenylazo)-2-hydroxybenzene-1-sulphonic acid]. Losses of aluminium during deproteinisation of the serum were prevented by treatment with a combination of 20 or 30% m/V trichloroacetic acid (TCA) and 5% m/VTCA. Iron(III) was removed by extraction into chloroform with capriquat (methyltrioctylammonium chloride) as an Fe3+-lumogallion-capriquat ternary complex. The interference from Cu2+ was eliminated by using thiosulphate as a masking agent. The detection limit was 3.6 ng ml-1 and the calibration graph was linear up to 1.4 micrograms ml-1 of aluminium. Using the proposed method, the average concentration of aluminium in the serum of healthy subjects was found to be 6.8 ng ml-1, in agreement with values reported in the literature.     

N,N-diethyl-N'-benzoylthiourea--a new spectrophotometric reagent for rhenium determination

The reagent N,N-diethyl-N'-benzoylthiourea produces a green complex with rhenium in hydrochloric acid medium in the presence of tin(II) chloride. The complex extracted into toluene shows an absorption maximum at 383 nm, obeys Beer's law from 1.5 to 22 micrograms ml-1 of rhenium while its molar absorptivity and Sandell sensitivity are 6.66 x 10(3) L mol-1 cm-1 and 0.028 microgram cm-2, respectively. It tolerates the presence of a large number of ions, including Mo(VI), W(VI) and some platinum metals. Job's and the mole ratio methods indicate that the rhenium metal and the chelating agent ratio of 1:2 in solution. The system has been applied to the determination of rhenium on synthetic samples and alumina based catalysts.     

Catalytic spectrophotometric determination of vanadium in seawaters based on the bromate oxidative coupling reaction of metol and 2,3,4-trihydroxybenzoic acid.

A new, simple, sensitive and selective catalytic method is developed for the determination of vanadium in natural and sea waters. The method is based on the catalytic effect of V(V) and/or V(IV) on the bromate oxidative-coupling reaction of metol with 2,3,4-trihydroxybenzoic acid (THBA). The reaction is followed spectrophotometrically by tracing the oxidation product at 380 and/or 570 nm after 5 min of mixing the reagents. The optimum reaction conditions are 6.4 x 10(-3) mol l-1 of metol, 2.0 x 10(-3) mol l-1 of THBA and 0.16 mol l-1 of bromate at 35 degrees C and in the presence of an activator-buffer solution of 1 x 10(-2) mol l-1 of tartrate (pH = 3.10). Following the recommended procedure, V(V) and/or V(IV) can be determined with linear calibration graphs up to 0.75 ng ml-1 and detection limits, based on the 3Sb criterion, of 0.008 and 0.018 ng ml-1 at 380 and 570 nm, respectively. The developed method was successfully applied, without any separation or preconcentration processes, to the determination of vanadium in natural and seawaters following the direct calibration and standard addition techniques, respectively.     

Kinetic-spectrophotometric determination of trace amounts of vanadium

A simple and sensitive kinetic-spectrophotometric method is described for the determination of vanadium and the possible mechanism of catalytic reaction is proposed. The method is based on the vanadium(V)-catalyzed oxidation of 1,8-diaminonaphthalene (DNA) by potassium bromate (Tiron as activator) at pH 3.8 and 40 degrees C. The reaction was monitored spectrophotometrically by measuring the increase in absorbance of oxidation products at 505 nm after a fixed time (6 min). The proposed method allowed the determination of vanadium in the range 0.025-15 ng ml(-1) with good precision and accuracy and the detection limit was down to 0.01 ng ml(-1). The method was found to be relatively selective and was applied successfully to the determination of vanadium in food and hair samples without previous separations. Recovery experiments have also been performed; excellent results were obtained.     

Spectrophotometric method for the determination of sorbic acid in various food samples with iron(III) and 2-thiobarbituric acid as reagents

A simple, rapid and accurate spectrophotometric method has been developed for the determination of sorbic acid in various food samples based on the oxidation of sorbic acid by iron(III) at 100 degrees C to malonaldehyde, which then reacts with 2-thiobarbituric acid to form a reddish brown product. The optimum experimental conditions for colour development have been assessed. Absorbance measurements were made at 529 nm in the presence of 0.4% m/V citric acid. The calibration graph was linear for 0-6 micrograms ml-1 of sorbic acid with a slope of 0.131 A micrograms-1 ml. The recoveries of sorbic acid at concentrations of 164-557 micrograms ml-1 ranged from 96 to 103%. The relative standard deviations of ten replicate determinations of sorbic acid in a synthetic cream soda sample spiked with 573 micrograms ml-1 of sorbic acid and in an onion juice sample containing 82 micrograms ml-1 of sorbic acid were 1.6 and 1.9%, respectively. Interferences from several common food additives can be minimised by extracting sorbic acid with diethyl ether and then back-extracting the acid with sodium hydrogen carbonate. The method has been applied successfully to the determination of sorbic acid in a wide range of food samples including beverages, cake, cake mate, garlic bread sprinkle, onion juice, oyster flavoured sauce and grenadine syrup.     

A highly sensitive spectrophotometric method for the determination of some phenothiazine antipsychotics using chloramine-T and indigocarmine.

A new simple, accurate and precise spectrophotometric method for the determination of six phenothiazine drugs in pure form and in dosage forms is described. The method is based on the oxidation of the studied drugs by a known excess of Chloramine-T in hydrochloric acid medium and subsequent determination of the unreacted oxidant by reacting it with indigocarmine in the same acid medium. The reacted oxidant corresponds to the drug content. The colored species exhibits maximum absorption at 610 nm. The apparent molar absorptivity values and Sandell sensitivity values are in the range 1.53 x 10(4)-2.96 x 10(4) l mol-1 cm-1 and 13.75-37.15 ng cm-2, respectively. The method is highly sensitive and suitable for 1-15 micrograms ml-1 concentrations with the detection limits being in the range, 0.0651-0.1724 microgram ml-1. The method was successfully applied to the studied drugs in their dosage forms. The results are reproducible within +/- 1% and compare favorably with those obtained by the procedures of the British Pharmacopeia.     

Determination of nucleic acids with crystal violet by a resonance light-scattering technique

For the first time, Crystal Violet (CV) was used to determine nucleic acid concentrations using the resonance light-scattering (RLS) technique. Based on the enhancement of the RLS of CV by nucleic acids, a new quantitative determination method for nucleic acids in aqueous solutions has been developed. At pH 5.03 and ionic strength 0.005 mol kg-1, the interaction of CV with nucleic acids results in three characteristic RLS peaks at 344.0, 483.0 and 666.0 nm. With 4.0 x 10(-5) mol l-1 of CV, linear relationships were found between the enhanced intensity of RLS at 666.0 nm and the concentration of nucleic acids in the range 0-2.5 micrograms ml-1 for herring sperm DNA, 0-4.0 micrograms ml-1 for calf thymus DNA and 0-4.5 micrograms ml-1 for yeast RNA. The limits of determination were 13.8 ng ml-1 for herring sperm DNA, 36.8 ng ml-1 for calf thymus DNA and 69.0 ng ml-1 for yeast RNA. The assay is convenient, rapid, inexpensive and simple.     

Speciation and preconcentration of vanadium(V) and vanadium(IV) in water samples by flow injection-inductively coupled plasma optical emission spectrometry and ultrasonic nebulization

An on-line separation, preconcentration and determination system for vanadium(IV) and vanadium(V) comprising inductively coupled plasma optical emission spectrometry (ICP-OES) coupled to a flow injection (FI) method with an ultrasonic nebulization (USN) system was studied. The vanadium species were retained on an Amberlite XAD-7 resin as a vanadium-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (V-5-Br-PADAP) complex at pH 3.7. Enhanced selectivity was obtained with the combined use of the formation on-line of the complexes and 1,2-cyclohexanediaminetetraacetic acid (CDTA) as masking agent. The vanadium complexes were removed from the microcolumn with 25% v/v nitric acid. A sensitivity enhancement factor of 225 was obtained with respect to ICP-OES using pneumatic nebulization (15-fold for USN and 15-fold for the microcolumn). The detection limit for the preconcentration of 10 mL of aqueous solution was 19 ng L-1. The precision for 10 replicate determinations at the 5 micrograms L-1 V level was 2.3% relative standard deviation (RSD), calculated from the peak heights obtained. The calibration graph using the separation and preconcentration system for vanadium species was linear with a correlation coefficient of 0.9992 at levels from near the detection limits up to at least 100 micrograms L-1. The method was successfully applied to the speciation of vanadium in river water samples.     

Flow-injection spectrophotometry of vanadium by catalysis of the bromate oxidation of N,N'-bis(2-hydroxyl-3-sulfopropyl)-tolidine

A highly sensitive flow-injection method is proposed for the catalytic determination of vanadium(V) at sub-nanogram per milliliter levels using a new indicator reaction. The method is based on the catalytic effect of vanadium(V) on the bromate oxidation of N,N′-bis(2-hydroxyl-3-sulfopropyl)-tolidine. 1,2-Dihydroxybenzene-3,5-disulfonate was used as an activator in the vanadium(V)-catalyzed reaction and significantly enhanced the sensitivity of the method. Vanadium(V) in the range 0.01-3.0 ng ml⁻¹ was easily determined with sampling rate of about 30 h⁻¹. Vanadium(IV) could be also determined. The limit of detection (S/N=3) was 0.008 ng ml⁻¹ and the relative standard deviations were 1.4 and 1.6% for ten determinations of 0.2 ng ml⁻¹ vanadium(IV) and vanadium(V), respectively. Interferences from metal ions could be suppressed by the addition of ethylenediamine-N,N,N′,N′-tetrakis(methylenephosphonic acid) as a masking agent. The proposed method was successfully applied to the determination of vanadium in water samples.     

Water-soluble metal naphthalocyanines--near-IR photosensitizers: cellular uptake, toxicity and photosensitizing properties in NHIK 3025 human cancer cells

Metal naphthalocyanine complexes (MNCSs) absorb light in the near-IR spectral region (760 nm) where tissue penetration is optimal and they have been proposed as agents for photodynamic therapy (PDT). Sulphonated derivatives of tris-(2,3-naphthalocyanato) bis-chloroaluminium(III) and zinc(II) with various degrees of sulphonation were prepared. Cellular uptake, aggregation in cellular environments, cytotoxicity and photosensitizing properties were studied. Three of the four dyes studied were taken up by cells to a satisfactory degree and were not cytotoxic at the concentration used (10 micrograms ml-1). The least sulphonated sample of zinc naphthalocyanine produced some phototoxic effects (LD50 = 1.12 J cm-2). All the other samples of sulphonated naphthalocyanine were found to be aggregated inside the NHIK 3025 cells, preventing any significant PDT effect.     

Indirect atomic absorption spectrometric determination of sulfate in human blood serum.

An indirect method for the determination of sulfate by atomic absorption spectrometry (AAS) is described. Sulfate forms a stable ion-association complex, [Cu(neocuproine)2]2+(SO4(2-)), in neutral medium, which can be extracted into isobutyl methyl ketone in the presence of a polar medium (methanol) with an efficiency higher than 98.0% and the extract can be analysed directly for copper (and hence indirectly for sulfate) by AAS. Measurement of the copper atomic absorption signal from the organic phase allows the indirect determination of 0.14-1.12 micrograms ml-1 of sulfate, giving a 450-fold increase in sensitivity over the conventional method of precipitation with barium. The limit of detection (3 sigma) is 3.2 ng ml-1 which is better than that of ion chromatography (0.15 micrograms ml-1). Indirect AAS allows the accurate assay of inorganic sulfate anion in biological fluids and tissues. The sulfate concentration determined by the proposed method in human blood serum (n = 6 in each instance) was 35.4-43.3 micrograms ml-1 in normal persons, 50.3-62.5 micrograms ml-1 in jaundice patients and 83.3-155.6 micrograms ml-1 in diabetic patients. A good correlation between measured sulfate and the sulfate added to blood serum was obtained.     

Extraction--spectrophotometric determination of oxalate in urine and blood serum

An extraction--spectrophotometric method is described for the determination of oxalate, based on the formation of a mixed ligand vanadium (V)--mandelohydroxamic acid--oxalate complex. The complex was extracted into a solution of trioctylmethylammonium chloride (Adogen 446) in toluene and the absorbance measured at 535 nm. The experimental variables and interferences in this determination were studied. The detection limit is 0.5 microgram ml-1 and the range of application is between 2 and 8 micrograms ml-1. The method was applied to the determination of oxalate in urine and blood serum.     

Catalytic flow injection determination of vanadium by oxidation of N-(3-sulfopropyl)-3,3',5,5'-tetramethylbenzidine using bromate

A catalytic flow-injection (FI) method was developed for the determination of 10⁻⁹ mol l⁻¹ levels of vanadium(IV, V). The method is based on the catalytic effect of vanadium(V) on oxidation of N-(3-sulfopropyl)-3,3′,5,5′-tetramethylbenzidine (TMBZ·PS) using bromate as oxidant to form a yellow dye (λ_max=460 nm). The use of 5-sulfosalicylic acid (SSA) as an activator enhanced the sensitivity of the method. The calibration graphs with a working range 0.05–8.0 ng ml⁻¹ were obtained for vanadium(V). Vanadium(IV) was also determined, being oxidized by bromate. The detection limit (signal/noise, S/N=3) was 0.01 ng ml⁻¹ (ca. 2×10⁻¹⁰ mol l⁻¹) vanadium. The relative standard deviations (R.S.D.) for 15 determinations of 0.5 ng ml⁻¹ vanadium, and for ten determinations of 0.1 and 1.0 ng ml⁻¹ vanadium were 0.41, 2.6 and 0.25%, respectively, with a sampling rate of 15 samples h⁻¹. The proposed method was successfully applied to the determination of vanadium in natural waters.     

Flow-injection chemiluminescent determination of vanadium(IV) and total vanadium by means of catalysis on the periodate oxidation of purpurogallin

A flow-injection chemiluminescent (CL) method is proposed for the successive determination of nanogram levels of vanadium(IV) and total vanadium. The method is based on the catalytic effect of vanadium(IV) on the oxidation of purpurogallin by periodate to produce light emission at 4 °C. The presence of hydrogen carbonate enhanced the light emission arising from the vanadium(IV)-catalyzed reaction. Since vanadium(V) did not catalyze the CL reaction of purpurogallin, vanadium(V) was determined after being reduced to vanadium(IV) by using an on-line silver-reducing column. Calibration curves for vanadium(IV) and (V) were linear in the range 0.1–10 ng ml⁻¹ with sampling rate of about 50 h⁻¹. The limit of detection for signal-to-noise ratio of 2 was 0.05 ng ml⁻¹ and the relative standard deviations were 1.4 and 1.6% for ten determinations of 2.0 ng ml⁻¹ vanadium(IV) and (V), respectively. Interferences from metal ions could be eliminated by the use of O,O′-bis(2-aminoethyl)ethyleneglycol- N,N,N′,N′-tetraacetic acid and diphosphate as masking agents. The proposed method was successfully applied to the determination of vanadium(IV) and total vanadium in fresh water samples.     

Interactions of Janus Green B with double stranded DNA and the determination of DNA based on the measurement of enhanced resonance light scattering

A novel assay of DNA with a sensitivity at the nanogram level is proposed based on the measurement of enhanced resonance light scattering (RLS) signals resulting from the interaction of Janus Green B (JGB) with DNA. At pH 6.37 and ionic strength < 0.20, the RLS signals of JGB were greatly enhanced by DNA in the region of 300-650 nm characterized by three peaks at 416.0, 452.0 and 469.2 nm. The binding properties were examined using a Scatchard plot based on the measurement of the enhanced RLS data at 416.0 nm at a high JGB: DNA molar ratio (R > 2.22), and an aggregation mechanism of JGB in the presence of DNA at the nanogram level is proposed. Linear relationships can be established between the enhanced RLS intensity and DNA concentration in the range 0-3.5 micrograms ml-1 for both calf thymus DNA (ctDNA) and fish sperm DNA (fsDNA) if 2.0 x 10(-5) M JGB is employed. The limits of determination were 8.7 ng ml-1 for ctDNA and 9.9 ng ml-1 for fsDNA, respectively. Synthetic samples were analysed satisfactorily.     

Synthesis of meso-tetra-(3,5-dibromo-4-hydroxylphenyl)-porphyrin and its application to second-derivative spectrophotometric determination of lead in clinical samples

A new very sensitive and selective chromogenic reagent, meso-tetra-(3,5-dibromo-4-hydroxylphenyl)porphyrin [T(DBHP)P], was synthesized and studied for the determination of trace lead in detail. In 0.10 mol l-1 NaOH medium, lead reacts with T(DBHP)P to form a 1:2 yellow complex, which gives a maximum absorption at 479 nm; 0-0.48 microgram ml-1 Pb(II) obeyed Beer's law. The molar absorptivity of the complex and Sandell's sensitivity are 2.5 x 10(5) 1 mol-1 cm-1 and 0.000812 microgram cm-2, respectively. Second-derivative spectrophotometry is better than conventional spectrophotometry in sensitivity and selectivity, and its limit of quantification, limit of detection and relative standard deviation are 0.70 ng ml-1, 0.21 ng ml-1 and 1.0%, respectively. Ca (3250-fold), Mg (2000-fold), Sr (1000-fold), Ba (750-fold), Al (1000-fold), Bi (500-fold), Fe (2000-fold), Co (750-fold), Ni (1000-fold), Cu (750-fold), Zn (1250-fold), Cd (2500-fold) and Ag (550-fold) do not interfere with the determination of lead. The chromogenic system is remarkably superior to other reagents, especially porphyrin compounds. The influence caused by oxygen in air or in solution can be easily eliminated by adding Na2SO3. The reaction is very stable, the stability constant of the complex being 1.2 x 10(45). The chromogenic reaction is completed within 1 min at room temperature when 8-hydroxylquinoline is used as catalyst. The proposed method has been applied to the direct determination of trace lead in clinical samples. The accuracy and precision are both very satisfactory.     

Supervanadophile: Complexation, preconcentration and transport studies of vanadium by octa functionalized calix[4]resorcinarene-hydroxamic acid

A new octa functionalized calix[4]resorcinarene bearing eight hydroxamic acid groups (OFCHA) has been synthesized and its analytical properties have been investigated. To elucidate the structure of the compound, elemental analysis, FT-IR and ¹H NMR spectral data have been used. The compound showed high affinity and selectivity for vanadium(V) in presence of large quantities of associated metal ions. The complexation of vanadium(V) with OFCHA has a 4:1 metal: ligand stoichiometry as evaluated by Job’s plot. A spectrophotometric method is proposed for the extractive determination of vanadium(V) in an acidic medium in the presence of diversified matrix, and verified by ICP-AES. Under the optimum condition of acidity, solvent, interfering ions and OFCHA concentration, the molar absorptivity of the complex is 5630 l mol^-1 cm^-1 at 495 nm. The system obeys Beer’s law over the range 0.125–8.75 μg ml^-1 of vanadium(V) with Sandell sensitivity 0.009 μg cm^-2. The preconcentration factor and overall stability constant evaluated at 25 °C were 142 and 14.18, respectively. The complexation is characterized by favorable enthalpy and entropy changes. Liquid membrane transport studies of vanadium(V) were carried out from source to the receiving phase under controlled conditions and a mechanism for transport is suggested. To check the validity of the proposed method, vanadium is determined in environmental, biological samples and some standard reference materials from NIST and BCS.