Studies on some novel Schiff-base complexes in solution and solid state

In solution Schiff-base complexes of stoichiometry MAB, MAB₂ or MA₂B₂ have been detected in the Co(II), Ni(II), Cu(II) and Zn(II)-o-vanillin (o-van) [A]-L-valine (val), L-glutamine (gln) and L-histidine (his)(B) systems. The results suggest that in the M-o-van-val/gln systems, the Schiff-base ligand (AB) is tridentate in M(AB) complexes, while (AB) is tetradentate in his systems. MAB₂ species can be represented as M(AB)(B), where the mode of coordination of (AB) would be similar to that in the M(AB) species. The MA₂B₂ complex can be represented as M(AB)₂, where (AB) is tridentate in all the systems. The stabilities of complexes follow the Irwin–Williams order of stability. MAB complexes were isolated and conformed by characterization data. Conductance studies indicate that all complexes are non-ionic. Magnetic susceptibility and electronic spectral data suggest a tetrahedral structure in Co(II) and Ni(II)-o-van-val/gln and Ni(II)-o-van-his systems and square-planar structure in Co(II)-o-van-his and Cu(II)-o-van-val/gln/his systems for the MAB species. The IR spectral data indicate the tri and tetradentate binding of (AB) in the M(AB) complexes, respectively, in M(II)-o-van-val/gln and M(II)-o-van-his systems. Antimicrobial activity of the ligand and its Cu(II) complexes has been studied; Cu(II) complexes have higher activity than that of the ligand and control.     

Polymer-nanoparticle complexes: from dilute solution to solid state

We report on the formation and the structural properties of "supermicellar" aggregates made from mineral nanoparticles and polyelectrolyte-neutral block copolymers in aqueous solutions. The mineral particles put under scrutiny are ultrafine and positively charged yttrium hydroxyacetate nanoparticles. Combining light, neutron, and X-ray scattering experiments, we have characterized the sizes and the aggregation numbers of the organic-inorganic complexes. We have found that the hybrid aggregates have typical sizes in the range of 100 nm and exhibit a remarkable colloidal stability with respect to ionic strength and concentration variations. Solid films with thicknesses up to several hundreds of micrometers were cast from solutions, resulting in a bulk polymer matrix in which nanoparticle clusters are dispersed and immobilized. It was found in addition that the structure of the complexes remains practically unchanged during film casting.     

Cyclodextrin solubilization of celecoxib: solid and solution state characterization

The low aqueous solubility of celecoxib (CCB) hampers its oral bioavailability and permeation from aqueous environment through biological membranes. The aim of this study was to enhance the aqueous solubility of CCB by complexation with cyclodextrin (CD) in the presence of water-soluble polymer. The effects of different CDs (αCD, βCD, γCD, 2-hydroxypropyl-β-cyclodextrin and randomly methylated β-cyclodextrin (RMβCD)) and mucoadhesive, water-soluble polymers (hydroxypropyl methylcellulose (HPMC), chitosan and hyaluronic acid) were investigated. The phase solubility profiles and CCB/CD complex characteristics were determined. RMβCD exhibited the greatest solubilizing effect of the two CDs tested. However, γCD was also selected for further investigations due to its safety profile. Addition of polymer to the aqueous CD solutions enhanced the CD solubilization. Formation of CCB/RMβCD/HPMC and CCB/γCD/HPMC ternary complexes resulted in 11 and 19-fold enhancement in the apparent complexation efficiency in comparison to their CCB/CD binary complex, respectively. The size of ternary complex aggregates in solution were determined to be from about 250 to about 350 nm. The data obtained from Fourier transform infra-red, differential scanning calorimetry and powder X-ray diffraction indicated presence of CCB/CD inclusion complexes in the solid state. Proton nuclear magnetic resonance data demonstrated that CCB was partially and totally inserted into the hydrophobic central cavities of RMβCD and γCD.     

Synthesis and structural characterization of lanthanide(III) nitrate complexes of a tetraiminodiphenol macrocycle in the solid state and in solution

The lanthanide(III) complexes [Ln(LH2)(NO3)3] 1-11(La-Er), 15(Y) and [Ln(LH2)(NO3)2(H2O)](NO3) 12-14 (Tm-Lu) of the tetraiminodiphenolate macrocycle L2- have been prepared by the transmetallation reaction between [Pb(LH2)(NO3)2] and Ln(NO3)3.nH2O. In these compounds, the uncoordinated imino nitrogens are protonated and are hydrogen bonded to the phenolate oxygens. The X-ray crystal structures of the La (1), Ho (10) and Lu (14) compounds have been determined. Compounds 1 and 10, in which all the three nitrates are bound in bidentate fashion, are isostructural with distorted bicapped square antiprism geometry for the metal centre. In [Lu(LH2)(NO3)2(H2O)](NO3) 14, of the two metal bound nitrates one is bidentate and the other is unidentate, while the metal centre obtains a distorted square antiprism coordination environment. Proton NMR spectra of the paramagnetic lanthanide complexes have been studied in detail. Contributions of contact and pseudo-contact shifts to the lanthanide induced isotropic shifts (LIS) of the macrocycle protons have been separated and good agreement has been obtained between the calculated LIS values and the experimentally observed values. Analysis of the NMR data has led us to conclude that all the complexes in dimethyl sulfoxide solution attain similar configurations. The absorption and emission spectral characteristic of several compounds have been investigated. The complexes of samarium (5) and europium (6) on photoexcitation at 400 nm exhibit well-resolved luminescence spectra at 77 K both in the solid state and a methanol-ethanol (1 : 4) glassy matrix. For the terbium (8) and dysprosium (9) complexes, however, the observed luminescence peaks are less resolved and weak in intensity.     

Spectral and photophysical characterization of donor-pi-acceptor arylthienyl- and bithienyl-benzothiazole derivatives in solution and solid state

A comprehensive study has been made in solution at room temperature (293 K), low temperature (77 K), and in thin films (Zeonex matrixes) of the spectral and photophysical properties of six arylthienyl- and bithienyl-benzothiazole derivatives functionalized with different donor groups. Similar experiments have been carried out with two related precursors (containing the arylthienyl and aryl-bithienyl conjugated systems), and results are compared. Singlet-singlet and triplet-triplet absorption spectra, emission spectra together with lifetimes and quantum yields have been obtained, and from these data the rates for all the radiative and nonradiative processes determined, providing information on the dominant decay processes. The arylthienyl-benzothiazole derivatives show high fluorescence quantum yields (phi(F)) with negligible internal conversion (phi(IC)), whereas the bithienyl-benzothiazoles display lower but still significant phi(F) values, but now radiationless processes (phi(IC) and phi(ISC)) are competitive. A comparison with the analogous oligothiophenes is made. Singlet oxygen yields were also determined and the triplet energy transfer to (3)O2 to produce (1)O2 was found to be highly efficient with values of S(Delta)(= phi(Delta)/phi(T)) varying from 0.4 to 1.     

Ruthenium(II) complexes containing tetrazolate group: electrochemiluminescence in solution and solid state

In this work, we report the results about the solution and solid-state phosphorescence emission properties of six Ru(II) complexes containing various 5-substituted tetrazolate ligands. The photo- and electrochemiluminescence spectra of all compounds revealed a red shifted emission with respect to the Ru(bpy)(3)(2+). Significant changes to the light emission energy and to the efficiency and sensitivity to oxygen were also determined by varying the nature of the substituent ring of the tetrazolate ligand. Light-emitting solid devices with active layers containing solid films of the same complexes were prepared, and preliminary studies of their electroinduced emission properties were performed. The electrochemiluminescence (ECL) emission intensity of two of the six complexes was of the same order of magnitude as the reference Ru(bpy)(3)(2+).     

Synthesis and characterization of zinc benzoate complexes through combined solid and solution phase reactions

A combined solid and solution phase methodology for the synthesis of a series of mononuclear and polynuclear zinc benzoate complexes is described. The substituent on the aromatic ring and the effect of solvent on deciding the composition of the complexes is presented. From the 4-substituted benzoic acids 4-methylbenzoic acid (ptolH), 4-nitrobenzoic acid (pnitrobenH) and 4-chlorobenzoic acid (pchlorbenH), the mononuclear complexes [Zn(ptol)₂(H₂O)₂], [Zn(pnitroben)₂(H₂O)(DMSO)₂] and [Zn(pchlorben)₂py)₂] (where DMSO = dimethylsulfoxide, py = pyridine) have been synthesized and structurally characterised. Zinc complexes from the reaction of zinc sulfate heptahydrate with 3-methylbenzoic acid (mtolH) and 2-methylbenzoic acid (otolH), the dinuclear complexes [Zn₂(μ²-mtol)₄(py)₂], [Zn₂(μ²-otol)₄(py)₂], pentanuclear complex [Zn₅(μ²-mtol)₆(mtol)₂(μ³-OH)₂ (py)₂] and tetranuclear complex [Zn₄(μ²-otol)₆(μ⁴-O) (DMSO)₂], have been prepared by varying the reaction conditions and the complexes have been structurally characterized.     

Diels-Alder reaction volumes in the solid state and solution

The densities of anthracene, tetracyanoethylene, maleic anhydride, N-phenylmaleineimide, trans, trans-1,4-diphenylbuta-1,3-diene, and their Diels-Alder adducts were measured in the solid state and in solution at 25 °C. The reaction volumes in the solid state were calculated from the difference in molar volumes. They turned out to be low, close to each other (–4 to –11 cm³ mol^–1), and slightly different from the reaction volumes (–8±1 cm³ mol^–1) calculated from the van der Waals radii. The reaction volumes in solutions (–15 to –32 cm³ mol^–1) were found from the difference in partial molar volumes of the reactants in dioxane, acetonitrile, and 1,2-dichloroethane, The experimental Diels-Alder reaction volumes in solution are determined not only by the formation of new bonds in an adduct: a considerably higher contribution (to 75%) is made by a change in the volume of intermolecular empty spaces in solution on going from reactants to adducts.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2386–2390, November, 2004.     

Protonation of leucoemeraldine in the solid state and in solution

The protonation of leucoemeraldine in power form and in N-methylpyrrolidinone (NMP) solution by HCIO₄ and HBF₄ has been studied by x-ray photoelectron spectroscopy (XPS), infrared (IR), and ultraviolet (UV)-visible absorption spectroscopy. In powder form, less than 25% of the amine nitrogens can be protonated in the absence of oxygen. The effects of oxygen on the degree of protonation and the distribution of amine and imine units upon deprotonation of the salt are investigated. The degree of protonation in leuccemeraldine can be increased to about 50% with 3 M HCIO₄, similar to that achievable with emeraldine base in powder form. In NMP solution, leucoemeraldine is easily oxidized by dissolved oxygen. Protonation of both leucoemeraldine and emeraldine base in NMP solutions results in metastable species which gradually undergo deprotonation. The resulting products are affected by the O₂ content of the solutions. © 1993 John Wiley & Sons, Inc.     

Rebek imides and their adenine complexes: preferences for Hoogsteen binding in the solid state and in solution

Rebek imides (3), formed from Kemp's triacid, were developed in the mid-1980's as model receptors for adenine derivatives. We report here the first account of their hydrogen-bonding preferences upon binding 9-ethyladenine (1a) in the solid state. Structural analysis begins with simple imides 3a-e that form discrete dimers, while bis-imide 4 forms ribbon-like structures in the crystalline phase. The hydrogen-bonding interface within each of the representative assemblies features short intermolecular N(3)imide...O(8*)imide* distances (ca. 2.95 A), indicative of two-point hydrogen bonding. Imides 3f-h could be co-crystallized with 1a; single-crystal X-ray analysis of the resulting complexes reveals hydrogen-bonding geometries nearly identical to those observed in nucleobase complexes of adenine and pyrimidine derivatives. Imides 3f and 3g form 2:1 ternary assemblies with 1a; the complex of the former, (3f)2 x 1a, displays both Watson-Crick- and Hoogsteen-type hydrogen bonding, whereas the complex of the latter, (3g)2 x 1a, shows the Hoogsteen motif and imide hydrogen bonding to N(3) of the purine base (N(3)adenine...N(3')imide = 3.07(1) A). Imide 3h forms a 1:1 complex with 1a (3h x 1a x CHCl3) and displays Hoogsteen binding exclusively. All of the 3 x 1a assemblies show C(adenine)...O(imide) distances (3.38-3.75 A) that are consistent with C-H...O hydrogen bonding. Base-pairing preferences for the Rebek imides are further explored in solution by 1H NMR one-dimensional NOE experiments and by computational means; in all cases the Hoogsteen motif is modestly favored relative to its Watson-Crick counterpart.     

Physicochemical characterization of cholesterol-beta cyclodextrin inclusion complexes

Study and characterization of molecular complexes between cholesterol and beta cyclodextrin has been done using X-ray diffraction, thermogravimetric analysis (TG), differential scanning calorimetry (DSC) and nuclear magnetic resonance spectroscopy (¹³C NMR). Whatever the value of the molar ratio cholesterol/βCD used during the preparation, the same compound is always obtained. Corresponding to a molar ratio 1/3 (cholesterol/βCD), this compound is a stable hydrate which, contrary toβCD, contains at room temperature a large amount of molecules of water. It can be dehydrated under low pressure but the thermal degradation occurs at 200°C (250°C forβCD). This implies that cholesterol is strongly bounded toβCD.     

Spectroscopic studies of iron(III) complexes of D-saccharose and D-glucose in the solid state and in solution

Iron(III) complexes of D-saccharose and D-glucose were prepared. The compositions of the complexes were determined by standard analytical methods. The Mössbauer spectra reflected the presence of high-spin iron(III) in the polynuclear species. EPR spectroscopy demonstrated antiferromagnetically coupled iron(III) centers within the solid complexes. The¹³C NMR spectra indicated the presence of a mixture of coordination isomers of iron(III) complexes containing the sugar ligand in differently bound forms.This work is dedicated to the memory of Dr. L. Korecz.     

Isomerization of cyclobutane ligands in the solid state and solution

Cyclobutane compounds are a class of compounds that can be conveniently synthesized in the solid state by employing crystal engineering principles. The rctt-isomer (or the syn-dimer) is the most common form of any cyclobutene compound that is obtained in the solid state by the photochemical [2 + 2] cycloaddition reactions. However, these rctt-isomers can be converted to other less accessible forms, under some special conditions. Isomerization of cyclobutane compounds thus plays an important role in synthetic chemistry. Such isomerization of cyclobutane compounds have been reported in organic salts, metal complexes, coordination polymers and metal-organic frameworks. In this review, these fascinating examples of isomerization that occur both in the solid state and solution phase have been discussed.     

Physicochemical investigation of the silver iodide-silver polymolybdate systems in the solid state

The systems AgIAg₂Mo₂O₇ and AgIAg₂Mo₄O₁₃ have been investigated by differential scanning calorimetry, X-ray analysis, and conductivity to characterize intermediate compounds with fast ion transport in the solid state. The results indicate that in the first system there is a new phase, at about 75 mole% AgI, which initially contains a small amount of an Ag₂MoO₄, 4AgI phase in a metastable condition. In the AgIAg₂Mo₄O₁₃ system no formation of highly conductive intermediate compounds was detected but rather a decomposition in Ag₂Mo₂O₇, 75 m/o AgI, and MoO₃ was observed. The results have been qualitatively discussed in terms of the role of the minority substituting polymolybdate anions leading to the formation of open-structured compounds of the AgI-modified type.     

Physicochemical characterization of nicergoline and cabergoline in its amorphous state

Formulation of poorly water-soluble crystalline drugs into their more soluble amorphous form is a common approach for improving their bioavailability. In this study, the amorphous forms of nicergoline (NIC) and cabergoline (CAB) were obtained by different methods (melting and precipitation under solvent evaporation). The physicochemical characteristics of the samples were determined by HPLC, differential scanning calorimetry (DSC), thermogravimetry, and X-ray powder diffractometry. The physical stability of the amorphous forms was investigated by DSC by considering how the onset temperature and the enthalpy content at the glass transition vary with aging time and temperature. Using the Kohlrausch–Williams–Watts equation on the data obtained from the experiments, the “mean molecular relaxation time constant” (τ) was estimated. This parameter was used to understand the stability of NIC and CAB in their glassy state at different temperatures, and results showed that their stability is adequate to enable the formulation of these drugs into solid dosage forms.     

Physicochemical characterization of nanotemplate engineered solid lipid nanoparticles

As the physicochemical characteristics of solid lipid nanoparticles (SLNs) play a critical role in their success, it is important to understand how the materials and process used in their preparation affect these properties. In this study, two stearyl alcohol-based formulations were prepared using nanotemplate engineering technology and characterized. Both formulations were of a small particle size (<100 nm), ellipsoidal shape, and low polydispersity. (1)H NMR spectroscopy confirmed that the SLNs have the expected solid core structure and PEGylated surface. Analysis of the bulk materials indicated that a number of complex interactions are present among the SLN components, including a eutectic between stearyl alcohol and Brij 78. The decreased crystallinity resulting from these interactions may allow for enhanced drug loading. Physiological stability was identified and confirmed as a potential problem due to the low melting point of the eutectic. However, it is expected that with appropriate formulation modifications nanotemplate engineered SLNs will possess the properties necessary for a successful drug delivery system.     

The structure of hydantoins in solution and in the solid state

The results of NMR spectroscopic and X-ray crystallographic studies are critically discussed with respect to the structure of hydantoins, their tautomerism, and their acidity. The imide NH proton of the preferred, nearly planar 2,4-imidazolidine-dione tautomer proved to be more acidic than the corresponding amide NH proton. Phenyl substituents at the ring nitrogen atoms and at C-5 are twisted from the plane of the hydantoin ring; in case ofortho substituents restricted rotation about the N-aryl bond was found and the barrier to rotation determined by dynamic NMR spectroscopy. For 5-benzyl substituents, afolded conformation of the two rings, due to intramolecular interactions, was found and for 5-exo-methylene substituted hydantoins the relevant E/Z isomerism at theexo-cyclic C, C double bond was studied. In addition, the¹H and¹³C chemical shifts of the hydantoins proved to excellently indicate the electronic distribution along the hydantoin ring moiety. Finally, the mass spectrometric fragmentation of the hydantoins is critically discussed.Dedicated to Prof. Rolf Borsdorf on the occasion of his 65th birthday.     

金属Xchiff碱配合物的研究 II: 三价铁自旋变异晶态配合物的磁学和谱学表征

本文对五种组成为[Fe(3-EtO-SalAPA)2]ClO4.S的Fe(III)自旋变异晶态配合物进行了磁学和谱学表征, 所有溶剂合物的变温磁化率和EPR数据证示它们的自旋态转变性质均属渐变型, 在110-300K范围内的Mossbauer谱都只显示单一的四极分裂双峰. 实验结果还表明, 在所有晶态配合物中, Fe(III)自旋态的转变速率小于EPR谱学的时间标度(~10^1^0s^-^1), 而大于Mossbauer谱学的时间标度(~10^7s^-^1). 随着溶剂分子体积由C6H5F至o-C5H4Cl2的依次增大, 相应溶剂合物的μeff-T曲线的Tc值向低温方向位移.特别在单卤代苯系列中, 溶剂的分子体积与Tc值呈线性关系, 但氯苯溶剂合物是例外:后者的反常现象主要是由晶格内部的Tc≈185K时伴随发生了与自旋变异协同的一级相变所造成, 这个相变过程已为示差扫描量热测定和Mossbauer中心位移对温度的曲线呈现的不连续性所证实.     

Study of tolbutamide-hydroxypropyl-gamma-cyclodextrin interaction in solution and solid state

Tolbutamide-hydroxypropyl-gamma-cyclodextrin (TBM-HPGCD) interaction has been investigated in an aqueous environment and in the solid state. The solubility of TBM was increased in accord with the amount of HPGCD added to the aqueous medium forming a soluble inclusion compound. The phase solubility diagram obtained was of A(L) type. Physical mixtures and kneaded systems of the drug and cyclodextrin derivative were prepared in 1:1 and 1:2 drug/cyclodextrin mol/mol ratio. All solid binary systems were characterised by hot-stage microscopy (HSM), differential scanning calorimetry (DSC), thermogravimetry (TG) and X-ray powder diffractometry (XRD). An inclusion complex was formed in both of the kneaded systems. In the 1:2 kneaded system, the entire drug was included in the cyclodextrin cavity, while, in the 1:1 kneaded system only a part of the drug formed an inclusion complex with the cyclodextrin. A significant improvement in the dissolution of the drug was obtained from the kneaded systems in comparison with that of the pure TBM and physical mixtures. However, there was no significant difference between the dissolution profiles of the two kneaded systems. The study suggests that an inclusion complex was obtained both in aqueous solution and in solid state.