Effect of Cl−, Br− and I− ions on the adsorption and association of cytosine at a mercury electrode

The pit, on alternating current polarograms of bases, indicating the region of potentials where the association of the adsorbed molecules takes place and a compact surface film is formed usually appears near the potential of the electrocapillary maximum. An exception in this respect is cytosine, which forms the pit at more negative potentials.The negative pit corresponds to the surface film formed by molecules of cytosine adsorbed electro- statically at the negatively charged mercury surface via their positive charge or the electropositive site. In the presence of Br⁻ or I⁻ ions the association of cytosine occurs also near the potential of the electrocapillary maximum. The I⁻ ions allow association at the electrically neutral electrode surface to occur more easily than do the Br⁻ ions. The surface film at the neutral electrode surface is formed by molecules of a complex of Br-cytosine, and/or I-cytosine. This complex has a higher surface activity than cytosine alone, due to the high polarizability of the bromine or iodine atoms, and the maximum adsorption is thus observed near the potential of the electrocapillary maximum, in a similar way as with 5-Br-cytosine or 5-I-cytosine.     

Concentration determination of I2 and I− formed by thermal and radiolytic decomposition of NaIO3

Journal of Radioanalytical and Nuclear Chemistry - As a part of the evaluation of radioactive iodine behavior under the severe accident condition of nuclear power plant, we measured the...     

Electrochemical sensor based on a carbon nanotube-modified imprinted sol–gel for selective and sensitive determination of ß2-agonists

We describe a molecularly imprinted electrochemical sensor for selective and sensitive determination of β₂-agonists. It is making use of a combination of single-wall carbon nanotubes (SWNTs) with a molecularly imprinted sol–gel. The SWNTs were introduced in order to enhance electron transport and sensitivity. The imprinted sol–gel film with its specific binding sites acts as a selective recognition element and as a preconcentrator for β₂-agonists. The morphology of the imprinted film was characterized by scanning electron microscopy. The optimized sensor displays high sensitivity and excellent selectivity for the β₂-agonists as shown for their determination in human serum samples.

Bithiophene triarylborane dyad: An efficient material for the selective detection of CN− and F− ions

A new fluorescent chemosensor based on bithiophene coupled dimesitylborane (BMB-1) was synthesized and characterized. BMB-1 was used for colorimetric and turn-on fluorescent sensing of cyanide (CN⁻) and fluoride (F⁻) ions, in the presence of other competitive anions in an aqueous (CH₃CN–H₂O) medium. BMB-1 showed a hypsochromic shift (blue shift) with addition of CN⁻ and F⁻ ions in absorption studies. The lower detection level of CN⁻ and F⁻ ions is 1.37 × 10⁻⁹ and 1.75 × 10⁻⁹ M, respectively. The BMB-1 binding mechanism is based on the nucleophilic addition of CN⁻ and F⁻ ions in the internal charge transfer transition of bithio moiety to the boranylmesitylene unit, and the color changes were observed under UV light. This result is further confirmed by Fourier transform infrared spectroscopy, mass spectrometry and density functional theory calculations. Also, the BMB-1 probe is found to be a good adsorbent for the removal of F⁻ ions in real water samples using the adsorption technique.     

Electrocatalytic determination of propranolol hydrochloride at carbon paste electrode based on multiwalled carbon-nanotubes and γ-cyclodextrin

A carbon paste electrode based on γ-cyclodextrin–carbon nanotube composite (γ-CD–CNT–CME) was developed for the determination of propranolol hydrochloride (PRO). The electrochemical behaviour of PRO was investigated employing cyclic voltammetry, electrochemical impedance spectroscopy and differential pulse adsorptive stripping voltammetry (DPAdSV). Surface morphology of the electrode has been studied by means of scanning electron microscopy. The results revealed that the oxidation of PRO is facilitated at γ-CD–CNT–CME. Under the optimized conditions in Britton–Robinson buffer pH 1.5, the peak currents were found to vary linearly with their concentrations in the range of 1.42 × 10^?7 to 4.76 × 10^?5 M. A detection limit (S/N = 3) of 4.01 × 10^?8 M was obtained for PRO by means of DPAdSV. The proposed method was employed for the determination of PRO in pharmaceutical formulations, urine and blood serum samples.     

Comparison between 2-hydroxypropyl-��-cyclodextrin and 2-hydroxypropyl-��-cyclodextrin for inclusion complex formation with danazol

Complexation in solution between danazol and two different cyclodextrins [2-hydroxypropyl-??-cyclodextrin (HP-??-CD) and 2-hydroxypropyl-??-cyclodextrin (HP-??-CD)] was studied using phase solubility analysis, and one- and two-dimensional ¹H-NMR. The increase of danazol solubility in the aqueous cyclodextrin solutions showed a linear relationship (A_L profile). The apparent stability constant, K _1:1, of each complex was calculated and found to be 51.7 × 10³ and 7.3 × 10³ M^?1 for danazol?CHP-??-CD and danazol?CHP-??-CD, respectively. ¹H-NMR spectroscopic analysis of varying ratios of danazol and the different cyclodextrins in a mixture of EtOD?CD₂O confirmed the 1:1 stoichiometry. Cross-peaks, from 2D ROESY ¹H-NMR spectra, between protons of danazol and H3?? and H5??of cyclodextrins, which stay inside the cyclodextrin cavity, proved the formation of an inclusion complex between danazol and the cyclodextrins. For HP-??-CD, the inclusion complex is formed by entrance of the isooxazole and the A rings of danazol in the cyclodextrin cavity. For HP-??-CD, two different inclusion structures may exist simultaneously in solution: one with the isooxazole and A ring in the cavity and the other with the C and D ring inside the cavity. DLS showed that self-aggregation of the CD??s was absent in the danazol HP-??-CD system up to a CD concentration of 10% and in the danazol HP-??-CD system up to a CD concentration of 5%.     

Thiocyanate: selective membrane electrode based on macrotricyclic binuclear Cu(II)–Schiff base complex

A highly selective PVC membrane electrode was prepared for thiocyanate (SCN^?) determination, based on macrotricyclic binuclear Cu(II)–Schiff base complex as an ionophore. The novel macrotricyclic compound (cryptand) was synthesized by condensation of 4,4′-diamino-dibenzo-18-crown-6 with bis(4-formyl phenyl)terephthalate under high-dilution condition and the structure was confirmed by FT-IR, ¹H NMR,¹³C NMR and MS studies. The Cu(II) complex of the compound was prepared and was examined for use as anion-selective electrode as a carrier which displays an anti-Hofmeister selectivity sequence in following order: SCN^? > ClO₄ ^? > NO₃ ^? > CN^? > I^? > CO₃ ^2? > NO₂ ^? > Br^? > Cl^? > SO₄ ^2? with a preference for thiocyanate ion over many common anions. The electrode has a linear dynamic range between 1.0 × 10^?7 and 1.0 × 10^?1 M, with a Nernstian slope of ?58.9 mV decade^?1 and detection limit of 3.1 × 10^?8 M. The working pH range of the sensor was found be in the range of 3.0–8.0. It exhibits a fast response time of 20 s and has a lifetime of about 2 months. Application of the electrode for determination of thiocyanate in waste water samples and in human urine samples have also been demonstrated.     

Efficient electrocatalytic oxidation and selective determination of isoniazid by Fe(tmphen) 3 2+ -exchanged Nafion?-modified electrode

Cyclic voltammetry and electrochemical impedance studies of Fe(tmphen) ₃ ²⁺ (where tmphen?=?3,4,7,8-tetramethyl-1,10-phenanthroline)-immobilized Nafion?-modified glassy carbon electrode (GC/Nf/Fe(tmphen) ₃ ²⁺ ) are carried out in 0.1?M Na₂SO₄ solution. Nafion–Fe(tmphen) ₃ ²⁺ complex exhibits efficient electrocatalytic oxidation of isoniazid. The linear double reciprocal plot of current and concentration of isoniazid shows a Michaelis–Menten-type catalytic process. The catalytic oxidation currents are proportional to the concentration of isoniazid and show a wide linear calibration range for the quantitative determination of isoniazid. Detection limit and sensitivity are found to be 13?μM and 2.5?μA?mM^?1, respectively.     

A novel sensor based on electropolymerization of β-cyclodextrin and l-arginine on carbon paste electrode for determination of fluoroquinolones

An electrochemical sensor for fluoroquinolones (FQs) based on polymerization of β-cyclodextrin (β-CD) and l-arginine (l-arg) modified carbon paste electrode (CPE) (P-β-CD-l-arg/CPE) was built for the first time. Synergistic effect of l-arg and β-CD was used to construct this sensor for quantification of these important antibiotics. Scanning electron microscope (SEM) image shows that polymer of β-CD and l-arg has been successfully modified on electrode. Electrochemical impedance spectroscopy (EIS) and cyclic voltammograms (CV) further indicate that polymer of β-CD and l-arg efficiently decreased the charge transfer resistance value of electrode and improved the electron transfer kinetic between analyte and electrode. Under the optimized conditions, this modified electrode was utilized to determine the concentrations of ciprofloxacin, ofloxacin, norfloxacin and gatifloxacin. The differential pulse voltammogram (DPV) exhibits the oxidation peak currents were linearly proportional to their concentration in the range of 0.05–100 μM for ciprofloxacin, 0.1–100 μM for ofloxacin, 0.1–40 μM for norfloxacin and 0.06–100 μM for gatifloxacin, respectively. This method was also successfully used to detect the concentrations of each drug in pharmaceutical formulations and human serum samples. In addition, this proposed fluoroquinolones sensor exhibited good reproducibility, long-term stability and fast current response.     

EPR Study on the complex formed by charge-transfer process between ground-state acceptor chloranil and nine donors

EPR study showed that the semi-quinone radical anion of chloranil (TCQ) was formed in a charge-transfer process between ground state chloranil as acceptor and each one of the following ground state donors,i.e.,N,N'-diethyl aniline (DEA),phenothiazine (PTZ),carbazole (CBZ),pyrene (PY),ferrocene (FRO),triphenylphosphine (TPP),triethylamine (TEA),anthracene (AN) and N,N-diethyl-3-aminophenyl ester of palmitic acid (DPP).Our results indicate that there is a tunneling effect for the ground-state charge-transfer process between chloranil and the donor.     

Scintillating polymer inclusion membrane for preconcentration and determination of α-emitting actinides

The scintillating polymer inclusion membrane (S-PIM) was developed for preconcentration and determination of α-emitting actinides from aqueous solution. The preparation of S-PIM involved physical immobilization of an extractant bis(2-ethylhexyl)phosphoric acid, primary scintillator 2,5-diphenyloxazole, and secondary scintillator 1,4-bis(2-methylstyryl)benzene in the plasticized cellulose triacetate matrix. The S-PIM was found to be effective for the quantitative sorption (94-98%) of trivalent lanthanides/actinides (, and ), tetravalent actinides (Pu(IV)) and hexavalent actinides (U(VI)) from the aqueous solutions whose acidity had been adjusted to pH 2.5, 1.0 and 0.25 mol/L, respectively with dilute HNO₃. The interference of β-emitting lanthanides, in preconcentration and determination of α-emitting actinides using S-PIM, were also studied. The α-scintillation counting efficiency in the S-PIM was found to be 92-95% after discriminating the background noise. However, β-scintillation counting efficiency was found to be in the range of 12-25% depending upon the energy of β-particles. It was observed that β-scintillation pulses from and could be discriminated based on pulse height analysis. Thus, α-activities of the actinides sorbed in the sample of S-PIM could be directly measured in the presence of β-emitters by scintillation counting. However, the α-scintillation counting efficiency was reduced to 38% after discriminating β-scintillation pulses in the S-PIM. The preconcentration ability of S-PIM was examined in tap water and seawater spiked with . The total α-activity of 46 Bq (present in 100 mL) could be preconcentrated and measured from tap water using S-PIM.     

A reversible fluorescent INHIBIT logic gate for determination of silver and iodide based on the use of graphene oxide and a silver–selective probe DNA

We describe a reversible fluorescent DNA–based INHIBIT logic gate for the determination of silver(I) and iodide ions using graphene oxide (GO) as a signal transducer and Ag(I) and iodide as mechanical activators. The basic performance, optimized conditions, sensitivity and selectivity of the logic gate were investigated and revealed that the method is highly sensitive and selective over potentially interfering ions. The limits of detection for Ag(I) and iodide are 10 nM and 50 nM, respectively. This logic gate was successfully applied to the determination of Ag(I) and iodide in (spiked) tap water and river water. It was also used for the determination of iodide in human urine samples with satisfactory results. Compared to other methods, this INHIBIT logic gate is simple in design and has small background interference.

A simple and reversible fluorescent DNA-based INHIBIT logic gate is designed by using graphene oxide as a signal transducer and silver ions and iodide as mechanical activators.

     

Study on preparation and inclusion behavior of inclusion complexes between β-cyclodextrin derivatives with benzophenone

In the paper, the two chemically modified β-cyclodextrin derivatives of 4,4´-diaminodiphenyl ether-bridged-bis-β-cyclodextrins (ODA-bis-β-CD) and p-aminobenzenesulfonic acid-β-cyclodextrin (ABS-β-CD) were synthesized, and then these two β-cyclodextrin derivatives were respectively formed into inclusion complexes with benzophenone (BP) by co-precipitation method. The structure of the inclusion complexes were characterized by UV/vis spectroscopy, FT-IR spectroscopy, elemental analysis, ¹H NMR spectroscopy and XRD. Spectral titration was performed to study the inclusion behavior of the inclusion complexes. These experiments indicated that two inclusion complexes were formed at a stoichiometric ratio of 1:1 and the inclusion stability constants at different temperatures were calculated using the Benesi–Hildebrand (B–H) equation. The thermodynamic parameters (ΔG°, ΔH°, ΔS°) were obtained. As a result, it was found that the two chemically modified β-cyclodextrins containing BP were exothermic and spontaneous process (ΔG°?<?0), and the processes of inclusion complexation were mainly enthalpy driven with negative or minor negative entropic contribution.     

“On–off–on” pyrene-based fluorescent chemosensor for the selective recognition of Cu2+ and S2− ions and its utilization in live cell imaging

A new “on–off–on” fluorescence chemosensor (DPD) was designed, synthesized, and characterized based on pyrene and benzothiozole hydrazide. The probe DPD shows high affinity towards Cu²⁺ ions and the DPD-Cu²⁺ ensemble shows high sensitivity towards S²⁻ ions through the displacement method in the presence of other interfering ions. The detection limits of DPD for Cu²⁺ and S²⁻ ions were found to be 0.73 and 0.87 nM, respectively. Furthermore, the receptor was effectively applied to recognize Cu²⁺ and S²⁻ ions in real samples and live A549 cells through imaging studies.     

Thick-film electrodes for measurement of superoxide and hydrogen peroxide based on direct protein–electrode contacts

Cytochrome c was immobilized on screen-printed thick-film gold electrodes by a self-assembly approach using mixed monolayers of mercaptoundecanoic acid and mercaptoundecanol. Cyclic voltammetry revealed quasi-reversible electrochemical behavior of the covalently fixed protein with a formal potential of +10 mV vs. Ag/AgCl. Polarized at +150 mV vs. Ag/AgCl the electrode was found to be sensitive to superoxide radicals in the range 300–1200 nmol L^–1. Compared with metal needle electrodes sensitivity and reproducibility could be improved and combined with the easiness of preparation. This allows the fabrication of disposable sensors for nanomolar superoxide concentrations. By changing the electrode potential the sensor can be switched from response to superoxide radicals to hydrogen peroxide—another reactive oxygen species. H₂O₂ sensitivity can be provided in the range 10–1000 mol L^–1 which makes the electrode suitable for oxidative stress studies.     

A highly selective colorimetric and “Off-On” fluorescence sensor for CN~- based on Zn(salphenazine) complex

The development of sensors for selective detection of cyanide ion(CN~-) is an important mission to accomplish because of the versatility and toxicity of CN~-. In the present work, an "ensemble"-based colorimetric and fluorescent sensor(L2-Zn~(2+)) for CN~-ion has been developed. The addition of cyanide ions removed Zn~(2+) from the ensemble(L2-Zn~(2+)) in aqueous medium, resulting in a color change of the solution from red to buff and a "turn-on" fluorescent response. Also, the sensitivity of both the fluorescenceand colorimetric-based assay is below the maximum allowable level of cyanide ions in drinking water set by the World Health Organization. In addition, test strips, which served as convenient and efficient CN~- test kits, were fabricated based on the sensor.Notably, the selective detection of cyanide with L2-Zn~(2+) for practical application was also performed in sprouting potatoes.     

Study on the variation of intraionic distance between Fe3+ and F− in methanol-water system based on its stability constant

The stability constants, ₁, of the monofluoride complex of Fe(III) have been determined in mixed methanol + water solvent system with 0.3 mol·dm^–3 HClO₄ using a solvent extraction technique. The values, in less than 0.31 mole fraction of CH₃OH (X _s) in the mixed CH₃OH+H₂O solvent solution, increase asX _s increases. The variation of in ₁ againstX _s was analyzed to elucidate the variation of intraionic distance between Fe³⁺ and F^–. The intraionic distance maintains constant inX _s<0.05 and lengthens with an increase ofX _s in 0.05<X _s<0.31.     

Self-assembled sulfonated β-Cyclodextrin layer on gold electrode for the selective electroanalysis of dopamine

Gold electrode with self-assembled D,L-cysteine grafted β-cyclodextrin sulfonic acid (Cys-β-CD∼SO₃) layer was fabricated and used to investigate the electrochemical behavior of dopamine. The experimental results indicated that the self-assembled Cys-β-CD∼SO₃ layer modified gold electrode has selective electrochemical response to dopamine with high sensitivity and excellent tolerance of ascorbic acid, which is the most common accompanying component in biological samples. Dopamine could be accurately determined in the concentration range of 1–200 μM in the presence of ascorbic acid of 5 mM. The relative standard deviation of 1.9% (n = 5) was achieved at a dopamine concentration of 5 × 10⁻⁵ M. The proposed sensor was successfully applied to the determination of dopamine in human blood serum samples.     

Phenanthrene-imidazole-based fluorescent sensor for selective detection of Ag+ and F− ions: real sample application and live cell imaging

Research on Chemical Intermediates - 4-Methyl-2,6-bis(1H-phenanthro[9,10-d]imidazol-2-yl)phenol (probe-MPIP) conjugate has been designed as a selective fluorescent probe for silver (Ag+) ions. The...