Spectrophotometric study of complexation of dibenzopyridino-18-crown-6 with some transition and post-transition metal ions in DMSO solution using murexide as a metallochromic ligand

The complexation reaction of dibenzopyridino-18-crown-6 (DBPY 18C6) with Co²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Hg²⁺, and Ag⁺ have been studied in DMSO at 25°C by the spectrophotometric method. Murexide was used as a competitive colored ligand. The stoichiometry of metal ion-murexide and metal ions with DBPY18C6 complexes were estimated by mole ratio and continuous variation methods and emphasized by the KINFIT program. The stoichiometry of all the complexes was found to be 1: 1 (metal ion/ligand). The order of stability constants for the obtained metal ion-murexide complexes (1: 1) varies in the order Cu²⁺ > Cd²⁺ > Co²⁺ ∼ Pb²⁺ > Zn²⁺ > Ag⁺ > Hg²⁺. This trend shows that the transition metal ions clearly obey the Irving-Williams role. For the post-transition metal ions, the ionic radius and soft-hard behavior was the major affects in varying of this order. The dibenzopyridino-18-crown-6 complexes with the used metal ions vary as Ag⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺ > Hg²⁺ > Zn²⁺ > Co²⁺. The article is published in the original.     

Chromogenic azole diazothiacrown ethers

Azocrown ethers with sulphur atoms and pyrrole or imidazole residue as a part of macrocycle have been synthesised. Their metal complexation abilities in acetonitrile were studied using UV–vis spectrophotometry. The largest spectral changes were observed for both pyrrole- and imidazole-azothiacrown ethers on complexation with Pb^2 + , Cu^2 + , Zn^2 + , Ni^2 + , Co^2 +  and Ag⁺ ions. In the case of alkali and alkaline earth metal ions no spectral changes were found. Preliminary studies of ion-selective membrane electrodes with synthesised ionophores are presented. In the measurement for transition/heavy metal cations, only copper and lead give high responses. X-ray structure of 18-membered pyrrole azothiacrown ether is described.     

Spectrophotometric and conductometric studies of the thermodynamics complexation of Zn2+, Ni2+, Co2+, Pb2+ and Cu2+ ions with 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane ligand in acetonitrile solution

The complexation reaction between 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane ligand (Kryptofix5) and Zn²⁺, Ni²⁺, Co²⁺, Pb²⁺ and Cu²⁺ ions were studied conductometrically in acetonitrile solution. The formation constants of the resulting 1:1 complexes were calculated from the computer fitting of the molar conductance and absorbance measurements in various mole ratios. The enthalpy and entropy changes of the complexation reactions were derived from titration conductometry in acetonitrile at various temperatures. At 25 °C, the stability of the resulting complexes varied in the order Pb²⁺ > Zn²⁺ > Cu²⁺> Co²⁺> Ni²⁺.     

Synthesis and Applications of a New Polysiloxane-Immobilized Macrocyclic Ligand System

Abstract

Insoluble porous solid, macrocyclic 22-membered ring, 1-oxa-6,9,12,15,18-pentaaza-2,22-disilacyclododocosane polysiloxane ligand system has been prepared by the reaction of a macro-silane agent with tetraethylorthosilicate. The macro-silane agent was prepared by the reaction of imino-bis(N-2-aminoethylacetamide) ligand with 3-iodopropyltrimethoxysilane in 1:3 molar ratio. The new prepared polysiloxane system exhibits variable potentials for the extraction of metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Hg²⁺, and Pb²⁺) from aqueous solutions. The ligand system shows high capacity to extract silver, lead, and mercury. Chemisorption of the metal ions by the ligand system at the optimum conditions was found in the order Ag ⁺ > Pb²⁺ > Hg²⁺ > Cu²⁺ > Ni²⁺ > Fe³⁺ > Co²⁺ > Cd²⁺ > Zn²⁺.     

Synthesis and metal ion complexation of acyclic Schiff base podands with lipophilic amide and ester end groups

A series of acyclic Schiff base podands 14?C19 with lipophilic amide and ester end groups were synthesized in good yield and in a simple way. Their transition metal ions complexation was studied using conductometric method in acetonitrile (AN) at 25 °C. Schiff base podands 14?C16 showed a continuous decrease in the molar conductances in their complexation with Hg²⁺, Pb²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ which begins to level off at a mole ratio of 1:1 crown-to-metal indicating the formation of a stable 1:1 complexes. The order of the stability constants of the metal ions studied with the Schiff base podands 14, 15 and 16 is: Hg²⁺ > Pb²⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺ > Ag⁺. Metal ion complexation by acyclic diamide or diester podands involves presumably the oxygen atoms of the carbonyl groups in addition to the nitrogen atoms of the imino groups.     

Binding of metal ions by polyethylenimine and its derivatives

Measurements have been made of the binding of divalent metal ions, Cu²⁺, Ni²⁺, Co²⁺, and Zn²⁺ ions, by polyethylenimine (PEI) and its acetyl or alkyl derivatives by the equilibriumdialysis technique. These metal ions, in particular the Cu²⁺ ion, exhibited tremendously remarkable binding affinity toward PEI. The extent of complexation of the polymer with the metal ions was decreased markedly by acetylation or alkylation of the polymer. PEI with no primary amine showed an appreciable decrease in its affinity for the metal ion. These results indicate the participation of the primary amine of the polymer in the formation of the complex. A cooperative binding isotherm was observed in PEI–metal ion complex formation, suggesting swelling or conformational change of the polymer induced by this coordination process. Binding of the Cu²⁺ ion by PEI was found to be essentially independent of temperature over the range 5–35°C.     

Preparation of hydrazinodeoxycellulose and carboxyalkyl hydrazinodeoxycelluloses and their adsorption behavior toward heavy metal ions

Nitrogen-containing cellulose derivatives hydrazinodeoxycellulose (HDC) and carboxyalkyl hydrazinodeoxycelluloses (α- and β-CAHDCs) were prepared from 6-chlorodeoxycellulose (CDC). Their adsorption of divalent transition metal ions was determined from dilute aqueous solutions and compared with that of aminoalkyl celluloses (AmACs) reported previously. HDC scarcely adsorbs metal ions in the pH range of 1–2, whereas α- and β-CAHDCs adsorb metal ions in this pH range. However, the adsorption of metal ions on HDC increases rapidly with increasing pH and HDC more effectively adsorbs metal ions than α- and β-CAHDCs in weakly acidic conditions. The ability to adsorb Cu²⁺ ions was in the order of AmAC (carbon number in the diamine moiety m = 2) > HDC > α-CAHDC > β-CAHDC in the weakly acidic region. These adsorbents selectively adsorb Cu²⁺ ions from the solutions containing other metal ions such as Mn²⁺, Co²⁺, and Ni²⁺, and the Irving–Williams series is obeyed in these adsorbent/metal ion systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3359–3363, 1997     

Synthesis,spectroscopic and spectrophotometric study of BODIPY appended crown ether sensor for ion detection

A novel fluoroionophore compound was synthesized from a boron dipyrromethene (BODIPY) fluorophore and 4′-formylbenzo-15-crown-5 ionophore groups. Photophysical properties of the BODIPY-crown compound were studied with UV–Vis and fluorescence spectroscopy. The effect of metalic cations (Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Al³⁺, Fe³⁺, Cu²⁺, Co²⁺, Zn²⁺, Ag⁺, Hg²⁺, Pb²⁺) on the absorption and fluorescence spectra of compound 2 was investigated. Blue shifts were detected in UV–Vis spectra upon addition of some metal ions (Al³⁺ > Fe³⁺ > Na⁺). At the same time, the emission intensity of this complex increased due to binding of Na⁺ ion to the benzo crown cavity. Additionally, a decrease in the intensity of the 630 nm emission peak and an increase in the intensity of the 570 nm emission peak was observed in the fluorescence emission spectra following addition of Al³⁺ and Fe³⁺ ions.     

Synthesis,characterization, speciation and biological studies on metal chelates of 1-benzoyl(1,2,4-triazol-3-yl)thiourea

Proton-ligand association constants of 1-benzoyl(1,2,4-triazol-3-yl)thiourea (BTTU) and its complex formation constants with some bivalent metal ions Ni(II), Co(II), Mn(II), Zn(II), and Cu(II), have been determined potentiometrically in 50% EtOH–H₂O and 0.1 M NaNO₃. The complexes formed in solution have a stoichiometry of 1:1 and 1:2 [M:L], where M represents the metal ion and L the BTTU ligand. The corresponding thermodynamic parameters are derived and discussed. The complexes are stabilized by enthalpy changes and the results suggest that complexation is an enthalpy-driven process. The effects of metal ion, ionic radius, electronegativity, and nature of ligand on the formation constants are discussed. The formation constants of the complexes with 3d transition metals follow the order Mn²⁺ < Co²⁺ < Ni²⁺ < Cu²⁺ > Zn²⁺. The metal complexes were synthesized and characterized by elemental analyses, conductance, IR, ¹H NMR, and magnetic measurements. The low magnetic moment of 0.11 BM for the Cu(II) complex is suggestive of dimerization through Cu–Cu interaction. The concentration distribution diagrams of the complexes were evaluated. The ligands and their metal complexes have been screened in vitro against some bacteria and fungi.     

Assessing effects of pH,metal ion and natural organic matter on identification and determination of reduced glutathione by cathodic stripping voltammetry

The effects of pH, metal ions (i.e. Cu²⁺, Cd²⁺, Pb²⁺ and Zn²⁺) and natural organic matter (i.e. Suwannee River natural organic matter standard [SRNOM]) on determination of thiol (i.e. reduced glutathione [GSH]) by cathodic stripping voltammetry were evaluated. pH was the most critical parameter to influence GSH voltammogram (i.e. peak shape, position and height). In presence of Cu and Cd, secondary peaks were found at [metal]/GSH > 1 due to formation of GSH complexes at pH = 8.0 (Cu and Cd) and 2.5 (Cu only). On the other hand, Pb showed negligible influence on GSH voltammogram at pH 8.0 and 2.5 within [Pb]/[GSH] = 0.01–2.0. Zn significantly reduced GSH peak height at pH 2.5 at [Zn]/[GSH] = 0.01–2.0. SRNOM peak significantly overlapped with GSH peak at pH 8.0 and [SRNOM] > 1 mg L^?1 but was clearly separated from the GSH peak at pH 2.5. However, at pH 2.5, the presence of metal ions and/or SRNOM significantly underestimated GSH concentration (recovery = 21–69%), likely due to metal complexation with GSH and/or SRNOM adsorption onto Hg electrode. The effects of metal ions were minimised by the addition of EDTA. The interference induced by SRNOM adsorption was reduced as the [SRNOM] was reduced to 1 mg L^?1 and the recovery was improved to 98%.     

Influence of different divalent metal ions on the properties of alginate microcapsules and microencapsulated cells

Different divalent metal ions (Ba²⁺, Sr²⁺, Ca²⁺, Zn²⁺) were selected as crosslinkers. The mechanical properties, cytocompatibility, histocompatibility, cell proliferation and long-term cultivation were investigated. The resulting microcapsules had good sphericity, smooth surface and particle size distribution of 300–400 μm. Sr²⁺ microcapsules exhibited a better mechanical strength. The molecular weights cut-off of all membranes were between 24 and 67 kDa. All microcapsules had no cytotoxicity. After intraperitoneal transplantation, the recovered microcapsules still maintained good mechanical strength and morphology with no fibrosis or macrophage aggregation phenomena. The microencapsulated PC12 cells showed no significant variation after recultivation following microcapsule breaking. The cell activity sequence of different microcapsules after 72 h was as follows: bare control cell >Sr²⁺ > Ca²⁺ > Ba²⁺ > Zn²⁺. After 9 weeks’ in vitro culture, the cell survival rate was higher than 80 %. This paper will be of scientific interests for the basic research and clinical application of alginate/chitosan microcapsules embedded with drugs or cells.     

Extraction and preconcentration capacity of bifunctionalized diamine-thiol polysiloxane immobilized ligand system towards some divalent cations

Porous solid bi-organofunctionalized diamine-thiol polysiloxane immobilized ligand system of the general formula P-(CH₂)₃- X, (where P represents [Si-O]_n siloxane network and X represents a mixture of diamine; -NH(CH)₂NH₂ and thiol; -SH functional groups) has been prepared by hydrolytic polycondensation of TEOS with a mixture of 3-mercaptopropyltrimethoxysilane and 3- (2-aminoethylimino)propyltrimethoxysilane agents. The ligand system was evaluated for extraction and preconcentartion of a series of divalent metal ions from aqueous solutions including: Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺. Both batch and dynamic methods were used to examine maximum sorption capacity. The maximum binding capacity followed the sequence; Cu²⁺ > Pb²⁺ > Cd²⁺ > Ni²⁺ > Zn²⁺ > Co²⁺ at pH 5.5. Measurement of variation of sorption of metal ions with temperature yielded negative values of ΔG° and positive values of ΔS° and ΔH° indicating a spontaneous and endothermic process of binding metal ions to the ligand system.     

Efficient synthesis and metal cations complexation of some novel dinaphthosulfide-substituted macrocyclic diamides

Some dinaphthosulfide aza macrocycles (3–9) were synthesized based on the conventional route from the reaction of corresponding dinaphthosulfide diester and aliphathic diamines in refluxing methanol in good yields. Dinaphthosulfide diester were synthesized from the reaction of 1,1′-thiobis (2-hydroxy naphthalene) and methyl chloroacetate. The structures of these compounds were confirmed using IR, ¹H NMR, ¹³C NMR, MASS spectroscopy and elemental analysis. Conductometric studies of the complexation of some metal ions with aza derivative 8 (TDN) in methanol as solvent implied the formation of 1:1 complexes. The stability of the 1:1 complexes of TDN decreases in the order Hg²⁺ >> Pb²⁺ > Cu²⁺ > Zn²⁺ > Ca²⁺ > Mg²⁺ > Cd²⁺ > Sr²⁺ > Ag⁺ > Ba²⁺.     

Competitive 7Li NMR Study on the Mn2+, Zn2+ and Cd2+ Complexes of Two New Branched Hexadentate (N6) Amines Containing the Pyridine Moiety in Nitromethane and Acetonitrile Solutions

Lithium-7 NMR spectroscopy was used to investigate the stoichiometry and stability of a Li⁺ complex with two new branched amines, 4,7-bis(2-pyridylmethyl)-4,7-diazadecane-1,10-diamine (L¹) and 4,8-bis(2-pyridylmethyl)-4,8-diazaundecane-1,11-diamine (L²), in acetonitrile and nitromethane. A competitive ⁷Li NMR method was also employed to probe the complexation of Mn²⁺, Zn²⁺ and Cd²⁺ ions with L¹ and L² in the same solvent systems. The formation constants of the resulting complexes were evaluated from computer fitting of the mole ratio data with an equation that relates the observed chemical shifts to the formation constant. In both solvents, the stability of the resulting 1:1 complexes was found to vary in the order Cd²⁺ > Zn²⁺ > Mn²⁺ > Li⁺.     

Effect of Solvent on Competitive Bulk Membrane Transport of Transition and Post Transition Metal Cations Using Decyl-18-crown-6

A series of competitive metal ion transport experiments have been performed. Each involved transport from an aqueous source phase across an organic membrane phase into an aqueous receiving phase. The source phase contained equimolar concentrations of cobalt(II), nickel(II), cupper(II), zinc(II), cadmium(II), silver(I) and lead(II) metal cations. The membrane phase incorporated ionophore, decyl-18-crown-6. The membrane solvents include: chloroform, dichloromethane, 1,2-dichloroethane, nitrobenzene and chloroform–nitrobenzene binary solvents. A good transport efficiency and selectivity of Pb²⁺ transport from aqueous solutions are observed in this investigation. The selectivity order for competitive bulk liquid membrane transport of the studied transition and post transition metal cations through chloroform is: Pb²⁺>Co²⁺>Ni²⁺>Ag⁺>Cd²⁺, but in the case of dichloromethane, 1,2-dichloroethane and nitrobenzene as liquid membranes, the selectivity sequences were found to be: Pb²⁺>Co²⁺>Cd²⁺>Cu²⁺>Ag⁺>Ni²⁺>Zn²⁺, Pb²⁺>Co²⁺>Ag⁺>Ni²⁺>Zn²⁺ and Pb²⁺>Co²⁺>Ni²⁺>Zn²⁺>Cd²⁺>Ag⁺, respectively. The transport rate of the metal cations in chloroform–nitrobenzene binary solvents is sensitive to the solvent composition. The transport processes were studied in absence and presence of the stearic acid and the results show that the sequence of selectivities and ion transport rates change in the presence of stearic acid.     

Synthesis of nucleobase-calix[4]arenes via click chemistry and evaluation of their complexation with alkali metal ions and molecular assembly

In this study, calix[4]arene derivatives (11–14) bearing a single nucleobase (adenine, thymine, cytosine or guanine) were synthesised via click chemistry. The complexation ability of the synthesised derivatives with alkali metal ions was measured using MALDI-TOF mass spectrometry, and their molecular assembly in CDCl₃ was determined using ¹H NMR. Calix[4]arene derivatives (11–14) formed 1:1 complexes with all alkali metal ions and the rank order for the complexation selectivity was Rb⁺ > Cs⁺ > K⁺ ? Na⁺ > Li⁺. The attachment of nucleobase at the upper rim of calix[4]arene had little effect on its complexation selectivity for alkali metal ions. Thymine-, adenine- and guanine-calix[4]arenes formed self-assembled structures in CDCl₃ via base–base interactions. In addition, adenine-calix[4]arene (11) bound to thymine-calix[4]arene (12) to form a discrete species via Hoogsteen hydrogen bonding.     

Sorption of metal ions to untreated,alkali-treated and peroxide-bleached TMP

Knowledge about how different metal ions are bound to pulp fibers is very important for optimal metal management in pulping processes. A column chromatographic method was used to assess the differences in affinity of 14 metal ions to untreated, alkali-treated and peroxide-bleached thermomechanical pulp (TMP). A method of competition between cations in the column chromatographic experiments was used in the sorption experiments, with an excess of each metal ion compared to the total capacity of the pulp studied. The method is very sensitive and even small differences in affinities can be detected. By combining the results from sorption experiments with four different metal ion mixtures the following order of affinity was obtained: Pb²⁺ ≫ Cu²⁺ ≫ Cd²⁺ > Zn²⁺ > Ni²⁺ > Ba²⁺ > Ca²⁺ > Mn²⁺ > Sr²⁺ > Mg²⁺ ≫ Rb⁺ ≈ K⁺ > Na⁺ > Li⁺. All three types of pulps showed the same affinity order. Lead and copper ions were clearly most strongly bound to the pulp fibers. Within the alkali and alkaline earth metal groups the differences in affinity were quite small. The sorption of metal ions to pulp fibers takes place mainly by complexation, where the divalent metal ions are coordinated to functional groups (acid groups) in the fiber phase. Protonation constants and concentrations of acid groups were determined by potentiometric titration. A model with two carboxyl groups and two phenolic hydroxyl groups satisfied best the experimental data. By treatment with alkali and peroxide new acid groups were created and the total binding capacity of hydrogen ions increased from 137 μeq/g for untreated pulp to 187 and 228 μeq/g for alkali-treated and peroxide-treated pulp, respectively.     

Divalent metal ion-sensitive holographic sensors

A holographic sensor for real-time detection of divalent metal ions (Ca²⁺, Mg²⁺, Ni²⁺, Co²⁺ and Zn²⁺) has been fabricated by incorporating a chelating monomer into a hydrogel matrix. A methacrylated analogue of iminodiacetic acid (IDA) was prepared and co-polymerised with hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethacrylate (EDMA) as a cross-linker to form polymer films. A silver-based reflection hologram was incorporated into the hydrogel by diffusion followed by holographic recording using a frequency-doubled Nd/YAG laser. Changes in the replay wavelength of the hologram were used to characterise the swelling behaviour of the matrix as a function of its chemical composition and concentration of analyte in the media. The effects of active monomer, cross-linker, pH and ionic strength on the swelling of the matrix and on metal detection sensitivity have been studied. Polymers containing >10 mol% of chelating monomer and 6 mol% of cross-linker showed significant responses (46.3 nm) within 30 s at an ion concentration of 0-40 nm. The selectivity of the holograms towards the different ions tested was Ni²⁺>Zn²⁺>Co²⁺>Ca²⁺>Mg²⁺. The sensor showed fully reversible responses, permitting real-time monitoring of calcium ion efflux during the germination of Bacillus megaterium spores.     

Conductometric studies of thermodynamics of complexation of Li+, Na+ and K+ ions with 4′,4″(5″)-di-tert-butyldibenzo-18-crown-6 in binary acetonitrile–nitromethane mixtures

The complexation reactions between 4′,4″(5″)-di-tert-butyldibenzo-18-crown-6 (DTBDB18C6) and Li⁺, Na⁺ and K⁺ ions were studied conductometrically in different acetonitrile–nitromethane mixtures at various temperatures. The formation constants of the resulting 1:1 complexes were calculated from the computer fitting of the molar conductance-mole ratio data at different temperatures. At 20 °C and in nitromethane solvent, the stability of the resulting complexes varied in the order K⁺ > Na⁺ > Li⁺. The enthalpy and entropy changes of the complexation reactions were evaluated from the temperature dependence of formation constants. It was found that the stability of the resulting complexes increased with increasing nitromethane in the solvent mixture. The TΔS° versus ΔH° plot of thermodynamic data obtained shows a fairly good linear correlation indicating the existence of enthalpy–entropy compensation in the complexation reactions. The ab initio studies calculated at B3LYP/6-31G level of theory, indicate the binding energy of complexes decreases with increasing cation size in the gas phase. In the solution phase, DTBDB18C6 preferentially forms complexes with the larger ions rather than the smaller ions because the solvation energies of the smaller ions are large enough to overcome and reverse the trends in gas phase complexation. The findings of this study suggest that the current understanding of the factors influencing the selectivity of metal ion complexation by crown ethers may be in need of revision.     

Synthesis and extraction studies of polymeric phthalimido functionalized calix[4]arene

The article comprises synthesis and extraction studies of polymeric calix[4]arene having phthalimide groups at the lower rim. The polymeric phthalimido functionalized calix[4]arene was synthesized via radical initiated reactions involving a vinylic monomer 5,11,17,23-tetra-tert-butyl-25-[4-(acrylamido)benzyloxy]-26,28-bis-(2-phthalimido-ethoxy)-27-hydroxycalix[4]arene (5) with styrene. A five atom spacer group was incorporated between the bulky calixarene core and the acrylate moiety in order to minimize steric interactions which proved to impede the polymerization. From the liquid–liquid and solid–liquid extraction studies it has been concluded that the precursor 3 (5,11,17,23-tetra-tert-butyl-25-(4-nitro benzyloxy)-26,28-bis-(3-phthalimidoethoxy)-27-hydroxy-calix[4]arene) is selective for metal cations. The order of extractability of metal cations by the ligand 3 decreases in the sequence: Hg²⁺ > Cd²⁺ > Cu²⁺ > K⁺ > Co²⁺ whereas its polymeric derivative is selective in the sequence: Hg²⁺ > Cd²⁺ > K⁺ > Co²⁺ > Cu²⁺ for the metal cations used in the experiments.