Denitrohydrogenation of aliphatic nitro compounds and a new use of aliphatic nitro compounds as radical precursors

Aliphatic nitro groups are replaced by hydrogen on treatment with tributyltin hydride which proceeds via free radical chain processes. As the nitro group is selectively denitrated and other reducible groups are not affected with tributyltin hydride, this reaction can be used as a method for removing the nitro group from polyfunctional compounds. The radical intermediates generated via denitration can be also used for the carbon-carbon bond forming reactions.     

Radical cyclisation studies of β-nitroamines from the nitro-Mannich reaction

A range of novel β-nitroacetamides with an alkenyl- or alkynyl tether were synthesized using the deprotonative or conjugate addition nitro-Mannich reaction. They were subjected to radical denitration-cyclisation with a 10 equivalent excess of tributyltin hydride, catalytic AIBN in refluxing benzene to explore the structural and electronic requirements for efficient cyclisation. Cyclisations of the β-nitroacetamides were successful in most cases, undergoing 5-exo-trig cyclisation to give the desired cyclopentyl or indanyl structures. Radical 1,4-translocation of a phenyl group was observed in several cases. Diastereoselectivity was low, with 2 or 3 of 4 possible diastereoisomers observed in most cases. Further purification by crystallisation allowed the isolation of some as single diastereoisomers. It was found that higher yields were obtained by increasing the substitution or reducing the degrees of freedom of the tether between the nitro group and the radical acceptor.     

Environmental aspects of tributyltin

The tributyltin species, the active ingredient in some antifouling paint formulations, is perhaps the most acutely toxic chemical to aquatic organisms ever deliberately introduced to water. It has been demonstrated to have an adverse effect on shellfish in France and England, and as a consequence the use of tributyltin-containing antifouling paints has been restricted in these countries. Other countries have banned the use of tributyltin-containing antifouling paints or are contemplating restrictions. This article reviews such environmental aspects of tributyltin as methods of analysis, toxicity, environmental occurrence, persistence and fate. Tributyltin concentrations in many locations may be high enough to cause chronic toxicity or harmful effects in some aquatic organisms, and in some locations the tributyltin concentrations may be high enough to be acutely toxic to some organisms. Biological degradation of tributyltin in water and sediment appears to be the most important factor limiting the persistence of tributyltin in aquatic environments. To some degree, then, the persistence of tributyltin in aquatic environments depends upon the nature of the ecosystem. Tributyltin exhibits low-to-medium persistence in water and moderate persistence in sediment. A summary is given of the regulatory status of tributyltin in some countries, and recommendations are made for further research.     

Fungicidal activity of tributyltin alkylsulfate esters

Tributyltin alkyl sulfate esters, e.g. tributyltin dodecyl sulfate, tributyltin hexadecyl sulfate and tributyltin octadecyl sulfate, were synthesized from the reaction of bis(tributyltin) oxide and appropriate alkyl hydrogen sulfates. The resulting tributyltin alkyl sulfate esters were found to exhibit fungicidal activity on Penicillium, Aspergillus and Syncephalustrum species.     

Preparations of some tributyltin phosphates

Different complex tributyltin organophosphates have been prepared; in some cases the organotin cation is directly linked to the phosphate group, in other cases it is linked to a carboxylate or to a thioate function in a RO-P substituent. The direct phosphorylation of a tributyltin hydroxy salt is only possible for a marked covalent salt. Intramolecular rearrangements were observed.     

The fate of triorganotin biocides on incorporation into hypalon paint-based marine antifouling systems:119mSn Mössbauer and 119Sn NMR studies

Incorporation of bis(tributyltin) oxide into a Hypalon paint system results in the formation of tributyltin chloride and a second organotin species, the identity of which remains uncertain. Both compounds are appreciably retained by the dried paint matrix, thereby resulting in marked reduction in the release rate of the tributyltin moiety into aqueous systems. In contrast, tributyltin acetate, tributyltin carbonate and bis(triphenyltin) oxide appear to be incorporated into the paint film in a largely unchanged state. In the case of triphenyltin chloride and triphenyltin acetate, evidence of dephenylation to form diphenyl- and monophenyl-tin compounds has been obtained.     

Bis(tributyltin) oxide as a wood preservative: Its chemical nature in timber

Tributyltin compounds have been used for many years as wood preservatives. This study has provided, for the first time, an explanation for the previously reported dealkylation and/or volatilization of the tributyltin species in, and from, timber. Thus ¹¹⁹Sn NMR studies have shown that, on impregnation into timber, bis(tributyltin) oxide, (Bu₃Sn)₂O, is rapidly converted to other tributyltin species, Bu₃SnOX, and that these subsequently undergo disproportionation to Bu₄Sn and Bu₂Sn(OX)₂ compounds. We have additionally demonstrated that Bu₄Sn, so produced, is not persistent in timber and is lost by volatilization. Since the rate of disproportionation of the Bu₃SnOX species should be dependent upon the nature of the X group, it should be possible to affect significantly, if not to stop, this process by the use of alternative tributyltin fungicides, e.g. tributyltin methanesulphonate. However, tributyltin fungicides have been used successfully in wood preservation for at least 25 years. Therefore, it must be concluded that, even after disproportionation in timber, in service, sufficient preservative action is retained to prevent decay of wood under the conditions of natural exposure.     

Determination of butyltin compounds in sediments using an improved aqueous ethylation method

We have determined tributyltin and dibutyltin species in various environmental sediment samples (marine, harbour and river sediment) using the in situ aqueous ethylation-gas chromatography-atomic absorption spectrometry method subsequent to extraction by methanol containing O.5M HCl. The present technique provides a significantly lower detection limit than previous methods, so that tributyltin can for the first time be measured in some of the samples. Thus, the method described is well suited for the determination of tributyltin and dibutyltin compounds in sediments with low levels of butyltin species (e.g., Main River, 1.7 ng of tributyltin as Sn/g dry sediment).     

A novel method for the synthesis of 2,2-diaryl-1,1-difluoroethenes

β,β-Difluoro-α-phenylvinylstannane 3 was prepared in 60% yield from the reaction of β,β-difluoro-α-phenylvinylsulfone 2 with tributyltin hydride in refluxing benzene for 5 h. The cross-coupling reaction of 3 with aryl iodides bearing substituents such as proton, fluoro, chloro, bromo, methoxy, methyl, trifluoromethyl, and nitro on ortho, meta, para positions of the benzene ring in the presence of 10 mol % Pd(PPh₃)₄/10 mol % CuI afforded the corresponding 2,2-diaryl-1,1-difluoroethenes 4 in 22-82% yields.     

Stability and microtox response of butenyltin compounds

Tributenyltin bromides containing double bonds at carbon atoms C-1, C-2 or C-3 were synthesized from symmetrical tetrabutenyltins. Although all three tetrabutenyltin compounds were stable, only the tributenyltin bromides with double bonds at C-1 and C-3 were sufficiently stable for further studies. In aqueous sodium bromide (NaBr) solution containing 1% acetone, tri-1-butenyltin bromide was more stable in sunlight than tri-3-butenyltin bromide, yet neither compound was as stable as tributyltin bromide. Stability in seawater, in the absence of ultraviolet (UV) light, was less for both tri-1-butenyltin bromide and tri-3-butenyltin bromide than for tributyltin bromide. The relative toxicities of the tributenyltin bromides were determined using a bioluminescent bacteria assay. The concentrations of tributenyltin bromides necessary to produce a toxic response were three to six times greater than for tributyltin bromide.     

Determination of organotins in natural waters by toluene extraction and graphite furnace AAS

The determination of tributyltin in natural waters by extraction into toluene and graphite-furnace AAS measurement of tin has been investigated. The effect of pH on the extraction of mono-, di- and tributyltin and triphenyltin has been examined and the optimum conditions for the estimation of tributyltin assessed. The AAS performance is greatly improved by using furnace tubes pretreated by soaking in sodium tungstate solution. Such pretreatment is essential if low detection limits are to be attained. Extraction of the tributyltin from aqueous media resulted in a marked signal enhancement (irrespective of the type of furnace tube), which varied according to the nature of the aqueous solution. The enhancement is believed to result from water in the toluene extract activating the tube surface. Methods for the estimation of tributyltin in waters, appropriate for screening samples as part of routine monitoring programmes, are described. With a 1-litre sample, a limit of detection of approximately 4 ng/l. was attained for tin. The relative standard deviation of six replicate analyses of sea-water containing 170 ng/l. tin (present as tributyltin) was 1.5%.     

Preparation of Acyclic Nitro Olefins from β-Trimethylsiloxy Nitro Compounds

An efficient process for the preparation of acyclic nitro olefins is described, which consisted of improved nitro aldol reaction to give β-trialkylsiloxy nitro compounds and the direct or indirect elimination of water.     

Regiospecifically controlled formation of tetrasubstituted tributyltin ketone enolates catalyzed by a palladium complex

The palladium-catalyzed hydrostannolysis of α-disubstituted allyl β-keto esters yields the corresponding tributyltin β-keto carboxylates which loose carbon dioxide at very moderate temperature, thus leading to the regiospecific formation of tributyltin tetrasubstituted enolates.     

Determination of Tributyltin in Oysters by Electrothermal Atomic Absorption Spectrometry

Abstract

Graphite-furnace atomic absorption spectrometry for tributyltin in oysters is described. Tributyltin is extracted by n-hexane after digestion with hydrochloric acid. The 3[sgrave] detection limit for tributyltin is better than 0.01 mg Sn/kg. Typical absorbance values are about 0.10 for tributyltin contents as low as 0.03 mg Sn/kg. Tributyltin contents of 29 oyster samples are given.     

三丁基锡二硫代氨基甲酸酯的合成及表征

通过三丁基氯化锡与二硫代氨基甲酸盐反应,合成了１０个 三丁基锡二硫代氨基甲酸酯,利用元素分析,ＩＲ、ＨＮＭＲ、ＵＶ和ＴＧ－ＤＴＡ表征了这些化合物结构,测定了部分化合物的生物活性。     

Synthesis of isotactic,syndiotactic, and heterotactic poly(tributyltin methacrylate) and poly(tributyltin methacrylate-co-styrene)

Pure isotactic and enriched syndiotactic poly(tributyltin methacrylate) were synthesized by the reaction of the respective poly(methacrylic acid) with tributyltin oxide. The heterotactic polymer was prepared in a similar manner and from free radical initiated (AIBN or BPO) polymerization of tributyltin methacrylate. In each case, polymer configuration was confirmed by ¹H-NMR of the hydrolyzed/esterfied product. The relatively large ¹¹⁹Sn-NMR linewidth of the isotactic tributyltin containing polymer suggests an intra-molecular exchange of the pendant tin groups. T_g, T_d, and M _v data are also reported. Poly(tributyltinmethacrylate-co-styrene) was prepared by free radical polymerization and reactivity ratios [r(styrene) = 0.51, r(TBTM) = 0.49] and Q-e values for TBTM (0.78, 0.38) were determined.     

Radical reduction of cyclic xanthates: Formation of alkenes and/or 1,3-oxathiolanes from 1,3-oxathiolane-2-thiones

AIBN-initiated radical reactions of 5-membered cyclic xanthates, 1,3-oxathiolane-2-thiones, with tributyltin hydride are described. Alkenes are formed at 0.025 M concentration of tributyltin hydride, whereas a higher concentration (0.25 M) gives 1,3-oxathiolanes. A mixture of alkene and 1,3-oxathiolane is obtained by use of intermediate concentrations. Reactions of cis-and trans-4,5-dialkyl-1,3-oxathiolane-2-thiones with tributyltin hydride afford E-alkenes stereoselectively. For an application of this alkene formation reaction, geraniol has been converted to linalool silyl ether in good yield.     

The Chemoselective Cleavage of Acylthioaryltioacetals with Tributyltin Hydride

Acylthioarylthioacetals are cleaved selectively by tributyltin hydride/AIBN affording thioacyls radicals, which can react with tethered carbon-carbon double or triple bond to form functionalized cyclopentanes.     

New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Stoichiometric Reactions of Enamines Derived from Diphenylprolinol Silyl Ethers with Nitro Olefins and Lessons for the Corresponding Organocatalytic Conversions – a Survey

The stoichiometric reactions of enamines prepared from aldehydes and diphenyl‐prolinol silyl ethers (intermediates of numerous organocatalytic processes) with nitro olefins have been investigated. As reported in the last century for simple achiral and chiral enamines, the products are cyclobutanes ( 4 with monosubstituted nitro‐ethenes), dihydro‐oxazine N‐oxide derivatives ( 5 with disubstituted nitro‐ethenes), and nitro enamines derived from γ‐nitro aldehydes ( 6 , often formed after longer reaction times). The same types of products were shown to be formed, when the reactions were carried out with peptides H‐Pro‐Pro‐Xaa‐OMe that lack an acidic H‐atom. Functionalized components such as alkoxy enamines, nitro‐acrylates, acetamido‐nitro‐ethylene, or hydroxylated nitro olefins also form products carrying the diphenyl‐prolinol silyl ether as a substituent. All of these products must be considered intermediates in the corresponding catalytic reactions; the investigation of their chemical properties provided useful hints about the rates, the conditions, the catalyst resting states or irreversible traps, and/or the limitations of the corresponding organocatalytic processes. High‐level DFT and MP2 computations of the structures of alkoxy enamines and thermodynamic data of a cyclobutane dissociation are also described. Some results obtained with the stoichiometrically prepared intermediates are not compatible with previous mechanistic proposals and assumptions.