The study of ion transport parameters associated with dissociated cation using EIS model in solid polymer electrolytes (SPEs) based on PVA host polymer: XRD,FTIR, and dielectric properties

Electrical impedance spectroscopy (EIS) model is used to determine ion transport parameters. The transport parameters such as mobility, carrier density and diffusion coefficient of ions are the subject of great interest. The solution cast method is used to fabricate SPEs using polyvinyl alcohol (PVA) loaded with different amounts of sodium iodide (NaI). XRD deconvolution is used to separate the crystalline phase from amorphous phase. The degree of crystallinity is reduced with an increased amount of NaI. FTIR is used to investigate the polymer/salt interactions. To find out the circuit element, the Nyquist plots of impedance results are fitted with EEC modeling. The bulk resistance obtained from the EEC modeling is used to determine DC conductivity. At room temperature the maximum conductivity of $2.41\times {10}^{-4}\mathrm{S}/\mathrm{c}\mathrm{m}$ is measured. The regions belong to the electrode polarization (EP) effect are distinguished form the spectra of dielectric constant and dielectric loss. Due to the buildup of charge carriers, the dielectric constant and loss are observed to be high at the low-frequency region. Obvious peaks are appeared in the tanδ and M“ spectra at high salt concentrations. Shifting of the tanδ peaks to the high frequency region are detected. The incomplete circular arc of the argand plot is shown the non-Debye relaxation. It is found that with increasing frequency, AC conductivity increased. The regions belong to the EP and DC contributions are differentiated in the AC spectra.     

A statistical measure of association and a series expansion of chain conformations

A simple, easily calculated, nonparametric statistic is described that can detect the presence of a functional relationship in bivariate data. Given a sample of data points (x,y), the statistic's value is nearly 1 if y is a linear function of x with little noise; it is greater than 1 if y is a nonlinear function of x; and it is close to 2 if x and y are uniformly and independently distributed. The statistic can be used to rapidly screen through large data sets to identify the most functionally related variable pairs. As an illustration, the statistic is used to detect relations between polypeptide conformational energy and functions of a series expansion for chain conformations.     

High temperature dielectric loss of h-BN at X band and its dependence on the electron structure,defects and impurities

The dielectric loss of hexagonal boron nitride (h-BN) at high temperature ranging from 291 K to 2023 K at X band is investigated by experimental and theoretical analyses. The dielectric loss is relatively low below 1273 K, nevertheless, above this temperature, much rapid increase in the dielectric loss is observed with the increase of temperature. At 2023 K, the dielectric loss is found to be 40 times more than that at room temperature. Our calculation reveals that the rapid increase in the dielectric loss from 1273 K to 1800 K is mainly contributed by the boron vacancy (V_B) defects but from that 1800 K to 2023 K is mostly caused by the hopping phenomenon of the electrons. It is also found that the reason that V_B has the smallest energy among the defect is that its electronegativiities are smaller and its bonding ability is weaker compared to other defects. And the co-existence of defects and impurities is found to enhance the conduction loss by first principle calculations, which is due to that the bond of B1 atom and N1 atom becomes weak and the jumping distance of the impurity ions is increased when V_B and Na co-doped in the structure.     

The role of surface oxides in formic acid oxidation on Au

Compared to Pt or Pd electrodes, Au is a poor catalyst for the direct anodic oxidation of HCOOH, but the formation of Au surface oxides in acidic solutions is accompanied by a fast oxidation of HCOOH. This fast reaction is not simply a secondary reaction of Au surface oxides since those oxides are kinetically stable in HCOOH solutions. They do oxidize HCOOH only via a slow and purely electrochemical process which occurs on free Au sites and is “driven” by oxide reduction. The fast HCOOH oxidation is due to a highly reactive intermediate which is able either to form stable Au oxides Au_nO_m or to react with HCOOH. Our results are consistent with the model that by the charge transfer step a reactive non-equilibrium {Au…O> species is formed which converts to stable equilibrium oxides Au_nO_m after migration and rearrangement steps. Pre-equilibrium <Au…O> oxidizes HCOOH and this oxidation is of lower order with respect to <Au…O> compared with the formation of Au_nO_m.     

用X-射线衍射法测定聚对苯二甲酸乙二醇酯/聚对苯二甲酸丁二醇酯共混体系的结晶度

Based on Hermans and Weidinger postulate that the crystalline fraction is proportional to crystalline intensity Ic and that the amorphous fraction is proportional to amorphous intensity Ia, it is. Suggseteet that for PBT/PET blends we assume that the intensity at 18. 2° is completely originated from amorphous scattering. The separation between the peaks at 17. 2° and 20. 8° is 3. 6°m, which is regarded as large enough to justify this assumption. Thus , it is possible to draw an acceptable demaraction line between the crystalline and amorphous scattering. The degree of crystallinity Xc is given by X_c-I_c/(I_c+KI_a),coefficient K is available by the values of Ic plotted against the values of Ia.For PBT/PET blends,we obtain that K is 0.95 and that correlation coefficient is 0.92 According to the method revieved above,we investi-gated the crystallinity of PBT/PET blends prepared by different ways.     

Determination of Iron in Calf Serum Using Bathophenanthroline and Thermal Lens Spectrometry

ABSTRACT

Thermal lens spectrometry has been used for the determination of iron in calf serum. The method is based on dissociation of Fe³⁺ from proteins, reduction of Fe³⁺ to Fe²⁺ and formation of a coloured complex between Fe²⁺ and bathophenanthroline. Contrary to the spectrophotometric method, it is shown that thermal lens spectrometry is less sensitive to scattering caused by the presence of small particles remaining in the test solution after the deproteinization step. The background signal is very small and the response is only slightly dependent on the amount of scattering particles. The method is reliable, sensitive and reproducible. The limit of detection for iron is 4 ppb and the relative standard deviation is around 2%. It is expected that the volume of serum sample necessary for an analysis can be reduced to less than 100 μl.     

Amino acid sequence prerequisites for the formation of cn ions

Ammo acid sequence prerequisites are described for the formation of c, ions observed in high-energy collision-induced decomposition spectra of peptides. It is shown that the formation of c_n ions is promoted by the nature of the amino acid C-terminal to the cleavage site. A propensity for c_n cleavage preceding threonine, and to a lesser extent tryptophan, lysine, and serine, is demonstrated where fragmentation is directed N-terminally at these residues. In addition, the nature of the residue N-terminal to the cleavage site is shown to have little effect on c_n ion formation. A mechanism for c_n ion formation is proposed and its applicability to the results observed is discussed.     

Elastic moduli and structure of low density polyethylene

Summary Low density polyethylene film is drawn at room temperature four times the original length and subjected to thermal annealing at 60, 80, and 100 °C keeping the film length constant. Long spacing measured by SAXS increased with increasing temperature of annealing; the increase of the long spacing is presumed to be due to the decrease of the number of micelles through relaxation during the annealing. Simultaneous measurement of the changes of the long spacing and the film length by stretching is carried out and stress-extension curves are obtained. The values of the initial moduli of the long spacingE ₁ and the film lengthY are very near to each other. Elastic modulus of the crystal latticeE _c is known to be 235 GN/m² and that of the amorphous regionE _a is found to be 0.15 GN/m². When higher stress is applied than in the case of the initial modulus, the percentage of extension of film is much greater than that of the long spacing. The discrepancy is explained by the increase of the number of micelles through stress crystallization.Dedicated to Professor Dr. K. Ueberreiter on the occasion of his 70th birthday.     

Alternating-current ionic conduction and dielectric relaxation of poly(vinylidene fluoride) at high temperatures

Dielectric properties of poly(vinylidene fluoride) have been studied in the frequency range 20 Hz to 1 MHz and between 100 and 220°C, during heating and cooling. The dielectric constant and loss change abruptly at the temperature T_m corresponding to the melting point. At lower frequencies, two types of ionic conductin are observed. One appears below T_m and is attributed to interfacial polarization. The other occurs above T_m and is related to electrode polarization. These results suggest that a crystalline polymer is a heterogeneous medium for ionic transport, while the melt is a homogeneous medium. From these results, the nature of ac ionic conduction in crystalline polymers is discussed. At high frequency, the α relaxation is observed below T_m. It is due to the molecular motion in the crystalline region and disappears at T_m.     

Dynamics of a polymer attached to a surface: Bead and spring model

The Smoluchowski formalism is used to solve the problem of a bead of frictional resistance β attached to a surface with a spring of force constant _k over which a linear shear field of strenght α flows. The power dissipation is given by βα²kT/_k. k and T have their usual meanings. The result is generalized to an n-bead polymer. It is found that the power dissipation of a Rouse model polymer attached to a surface at one end is twice that of an identical polymer flowing freely in solution. If the force constant _k arises from an entropy force, then, because of the effect of the surface on the number of polymer configurations, there is an additional factor of two. The same relationship is expected to also hold for the frequency-dependent power dissipation. It is argued that a net circulation exists in the beads above the surface and that the magnitude of the circulation is roughly comparable to that which exists in a polymer freely rotating in solution under a shear field of the same magnitude.     

A study of the mechanical anisotropy of high-draw,low-draw,and voided PVDF

The mechanical anisotropy of oriented PVDF sheet is examined using a variety of experimental techniques. The mechanical behavior is similar to that observed previously for low-density polyethylene and nylon and consistent with a parallel lamellar crystalline structure. The s₃₁ compliance is reduced in magnitude by drawing to higher draw ratio, but the reduction in the piezoelectric coefficient d₃₁ is less marked, suggesting that the piezoelectric response cannot be related solely to dimensional changes under stress. Drawing to high draw ratio increases the s₃₃ compliance, and this is further increased by introducing voids. The corresponding d₃₃ piezoelectric coefficient is not changed significantly by drawing to high draw ratio, or by the introduction of voids, again indicating that the piezoelectric behavior relates to factors other than dimensional changes.     

A new method of radioactivation analysis based on the quantitative isotope dilution principle

The simple quantitative isotope dilution method proposed, allows the errors due to flux fluctuation and self-shielding, normal to ordinary radioactivation analysis, to be avoided. Three different methods are discussed. The most satisfactory method from a theoretical viewpoint involves division of the irradiated sample into two parts; in one part, an amount m is extracted and the radioactivity a is measured. An amount of carrier M is added to the other part, an amount m is again extracted and its radioactivity a' is measured. The unknown amount M_x is then calculated from (a/a') I = M/Mx. A method for the determination of traces of copper and silver in metallic tin and zinc based on this principle is described.     

Physico-chemical aspects of polyethylene processing in an open mixer. Part 26: Formal kinetics of aldehyde and carboxylic acid formation at a constant rate

Formation of carboxylic acids at a constant rate can be easily explained. It seems to result from the formation and decomposition of α,γ-keto-hydroperoxides. Formal kinetics based on formation and decomposition of these structural units is in agreement with the experimental findings. The activation energy deduced from the calculations is negligible, in agreement with the experimental data showing the constant rate to be practically temperature independent. Comparison of the acids with the hydroperoxides and ketones formed initially shows that the rate of oxygen addition to alkyl radicals is significantly smaller than in low molecular mass liquids. The same conclusion is reached on comparing directly the acids formed on decomposition of α,γ-keto-hydroperoxides in polyethylene melt and in hexadecane. The rate of oxygen addition in polyethylene melt is closer to 2 × 10⁵ than to 6 × 10⁵ (s⁻¹) that is valid in hexadecane.It is possible to attribute the relatively small amount of aldehydes that might be formed at a constant rate to different reactions of alkoxy radicals that are not in a cage with other radicals. These alkoxy radicals result from the addition of peroxy radicals to unsaturated bonds. This addition is followed mainly by epoxide formation and simultaneous release of an alkoxy radical.     

Photoreduction d'arylcetones par les amides et les lactames: applications synthetiques

Benzophenone is photoreduced by lactams and amides. In this reaction the hydrogen atom α to the lactam nitrogen is abstracted regioselectively, and radical coupling leads to adducts. The reaction is general and comparable to an hydroxyalkylation α to the nitrogen atom. Its quantum yield is 0.13 in the case of N-methyl 2-pyrrolidone in CH₃CN or in C₆H₆. Adducts obtained with acetophenone and p,p'-dimethoxy benzophenone are described. The reduction of adduct 12yields the diphenylethanolamine 22 and 12 is dehydrated to give the enamide 21.     

Vibronic intensities in centrosymmetric lanthanide complex ions. I

Summary A theoretical model to calculate the vibronic intensities induced by the odd vibrational modes in centrosymmetric lanthanide complexes is developed and applied to octahedral complex ions, LnX ₆ ^3– , such as occur in the hexachloroelpasolites Cs₂NaLnCl₆. Both the crystal field and the ligand polarisation contributions are evaluated using a standard set of symmetry coordinates. For the crystal field term a truncated expansion of the intermediates states is employed rather than the more conventional closure approximation. Special care is necessary to ensure that the phases of the contributions are correctly determined since the cross-term between the ligand polarisation and crystal field contributions is signed. General equations applicable to anyf ⁿ complex ion are derived and an example of their application to the PrCl ₆ ^3– ion is given The agreement with experiment is satisfactory.     

Metal exchange kinetics: uncatalyzed replacement of Ni(II) from tetramethylenediaminetetraacetatonickel(II) complex by Cu(II)

The kinetics of metal exchange between copper(II) and tetramethylenediaminetetraacetatonickel(II), [Ni(TMDTA)] has been studied between pH 3.4 and 4.8 at an ionic strength of 1.25 M (NaClO₄) and a temperature of 25.0 ± 0.1 °C. The reaction is first order in [Ni(TMDTA)]. The reaction order in [Cu²⁺] varies from first to zero and then back to first as [Cu²⁺] is increased. At low copper concentration, the first-order rate constant is pH independent and represents the attack of copper on the nickel complex through a pathway in which TMDTA is partially uncoordinated before reaction with copper. Evidence is presented for a stepwise dechelation mechanism followed by attack of copper to give a dinuclear intermediate. The zero-order rate is pH dependent. At higher [Cu²⁺], the swing back to first order is due to the formation of a weak copper-tetramethylenediaminetetraacetatonickelate complex which then converts to products through a dinuclear intermediate. A plausible mechanism, consistent with all the kinetic data, is presented.     

Gibbs energy based procedure for the correlation of type 3 ternary systems including a three-liquid phase region

Equilibrium data for type 3 ternary systems comprising a liquid–liquid–liquid equilibrium region (LLLE tie-triangle) are not frequently correlated, as is evidenced by a lack of studies in the literature. In the present paper, a robust algorithm to calculate or correlate equilibrium data for this type of system is proposed. This algorithm is based on geometric aspects related to the Gibbs energy of mixing (g^M) and possesses some interesting advantages that are discussed in the text. The methodology put forward is applied to correlate the equilibrium data of three type 3 ternary systems. The NRTL model is used to define g^M, and the common tangent plane criterion to define the equilibrium condition for the calculations. The lack in flexibility of the NRTL equation to model these systems is discussed.