应用多接收器电感耦合等离子体质谱法测定海洋碳酸盐中稳定铅同位素组成

研究了多接收器电感耦合等离子体质谱仪(MC-ICP MS)测定铅同位素比值时,影响测试结果准确度和精密度的主要因素及其优化过程。在优化条件下,10 h内连续30次测定4 ng/mL NIST SRM 981同位素标准溶液铅同位素比值,获得208Pb/206Pb、207Pb/206Pb和206Pb/204Pb相对标准偏差(RSDs)分别为0.005%、0.004%和0.054%。长期监测208Pb/206Pb、207Pb/206Pb和206Pb/204Pb,标准偏差(2SDs)分别为0.000 06、0.000 05和0.006 7。采用NEPTUNE MC-ICP MS法测定了低铅海洋碳酸盐样品中稳定铅的同位素比值,并对南海橙黄滨珊瑚(Porites lutea)和库氏砗磲(Tridacna gigas)进行了分析,得到全流程空白为8～10 pg,重复样误差优于0.1%。经0.50 mol/L HNO3洗脱之后,得到海南珊瑚样品中208Pb/206Pb、207Pb/206Pb的比值分别为2.086 2±0.001 5、0.849 90±0.001 47(n=16);海南砗磲样品中208Pb/206Pb、207Pb/206Pb的比值分别为2.116 9±0.004 2、0.864 81±0.001 62(n=9)。进一步考察了南海海洋碳酸盐中204Pb的同位素比值。分析结果表明,南海海洋碳酸盐中稳定铅同位素比值与中国气溶胶、珠江三角洲大气沉降、黄土及南海海底玄武岩等具有很好的相关性。方法适用于复杂基体高钙低铅的海洋碳酸盐样品中铅同位素比值的分析。     

激光剥蚀电感耦合等离子体质谱法测定地质玻璃中铅同位素组成

将193nm准分子纳秒激光与四级杆电感耦合等离子体质谱联用,测量了国际参照物玻璃中Pb同位素丰度比。通过剥蚀NIST612,USGS和MPI-DING玻璃,探讨了利用激光剥蚀电感耦合等离子体质谱直接测定固体样品铅同位素比值的精密度及其适用范围。通过扣除Ar载气中204Hg对204Pb的同量异位素干扰,采用内标法和外标法校正LA-ICP-MS仪器的质量歧视效应,获得的206Pb/204Pb、207Pb/204Pb、208Pb/204Pb同位素比值测量的相对误差小于±1.2%,207Pb/206Pb、208Pb/206Pb同位素比值测定的相对误差小于±0.8%。对比结果表明,采用内标法校正的结果更接近真实值。测定的Pb同位素比值的精密度与样品中Pb含量密切相关,对Pb含量大于40μg/g的样品,同位素比值206Pb/204Pb、207Pb/204Pb、208Pb/204Pb的RSD在1.0%以内,207Pb/206Pb、208Pb/206Pb的RSD在0.5%以内。大气颗粒物样品中Pb含量很高,采用LA-ICP-MS测定Pb同位素比值,能够鉴别污染来源,满足示踪的要求。     

ICP-MS测定土壤中铅同位素比值及地域差异性比较

建立用HNO_3-H_2O_2-HF体系微波消解前处理样品,利用电感耦合等离子体质谱测定土壤中铅同住素比值的方法,探讨并优化了影响测试结果的两种干扰因素.该方法中~(207)Pb/~(206)Pb和~(208)Pb/~(206)Pb的短期测量稳定性RSD分别达到0.12%和0.13%,长期测量的偏差分别在0.002和0.01以内,样品测量的最佳范围是10～40μg/L.采用标样-样品交叉法测定了湖南、湖北、云南、贵州、河南、福建、辽宁7个省的48个地区土壤中的铅同位素比值,结合聚类分析和主成分分析比较了各省土壤中同位素分布的差异,初步探讨了利用~(207)Pb/~(206)Pb和~(208)Pb/~(206)Pb比较烟叶产区的可能性.     

激光烧蚀-多接收电感耦合等离子体质谱法测定铀颗粒物中铅杂质的同位素比值

为有效获取铀颗粒物中具有取证价值的铅杂质同位素信息,建立了激光烧蚀-多接收电感耦合等离子体质谱(LA-MC-ICP-MS)测定铀颗粒物中铅杂质同位素比值的方法.探究了诸多同位素分馏效应校正方法下铅本底对同位素测量的影响,选用的LA-MC-ICP-MS系统的本底对比值测量结果的影响小于0.001(208Pb的信号强度大于2.2× 103 cps),确定采用NIST SRM612为外标校正质量分馏,固定激光束斑直径30μm、脉冲重复率20 Hz、调节能量密度使LA-MC-ICP-MS分析NIST SRM612和铀颗粒物样品所得208Pb分别小于1.5×105 cps和3×104 cps,标准物质CRM124-4样品中206Pb/208Pb、206Pb/207Pb和207Pb/208Pb比值测量结果的相对实验标准不确定度小于0.48％、0.68％和0.40％.实际样品分析结果表明,本方法可有效区分铀颗粒物中的铅同位素比值差异,有助于鉴别其来源.     

电感耦合等离子体质谱法测定水泥样品中的铅同位素比值

研究和讨论了用电感耦合等离子体质谱仪(ICP—MS)测定铅的同位素比值测定时，影响测试结果的准确度和精密度的主要因素及其优化过程。在优化后的仪器分析条件下，测定5μg/L的NIST SRM981自然丰度铅同位素标准溶液的各对铅同位素比值，获得的^207Pb／^206Pb分析精度可优于0．1％。在该条件下测定了14个不同的水泥粉样品中的铅同位素比值，结果显示：铅的同位素比值分析技术可以用来示踪环境监测样品的铅污染源。     

电感耦合等离子体质谱法测定动物组织中的铅同位素比值

动物组织样品1.000 0g用高氯酸1mL和硝酸10mL经加热消解处理,采用电感耦合等离子体质谱法测定样品溶液中的铅同位素比值。连续6次测定一个动物组织样品,204 Pb/206Pb、207Pb/206Pb和208Pb/206 Pb比值的相对标准偏差分别为0.23%,0.090%,0.14%。测定了20个鸡样品和20个猪样品,结果表明:鸡样品的上述3个比值依次在0.052 1~0.060 2,0.829 4~0.920 4,1.990 3~2.203 7之间;猪样品的上述3个比值依次在0.050 1~0.059 6,0.820 9~0.918 0,1.999 4~2.242 3之间。     

阴离子交换树脂分离富集/电感耦合等离子体质谱测定珊瑚中铅的同位素组成

在自制微型离子交换柱的基础上,建立了阴离子交换树脂AG1-X8分离富集珊瑚中痕量元素Pb的前处理方法,并使用高分辨电感耦合等离子体质谱(HR-ICP-MS)测定了海南橙黄滨珊瑚(porites lutea)样品中的Pb同位素比值。从全程空白值、洗脱曲线、回收率和基体分离情况等方面考察了不同洗脱剂的洗脱效果,结果表明,采用0.50 mol/L HNO3时的洗脱效果最好,方法的全程空白值为18 pg,Pb的回收率为99.6%,在洗脱过程中无拖尾现象,且能与Ca、Sr、Mg、Fe、Mn、Zn、Ba和U等珊瑚中的基体元素成功分离,对上述基体元素的去除率均能达到99.8%以上。使用该方法测得海南珊瑚样品中的207Pb/206Pb、208Pb/206Pb比值分别为0.850 5、2.087 0,相对标准偏差(RSDs,n=21)分别为0.12%和0.11%。该法质量控制良好,表明建立的AG1-X8阴离子交换树脂分离富集/HR-ICP-MS测定珊瑚中Pb的同位素组成的方法可靠,可推广应用于其它复杂样品中铅同位素组成的测定。     

基于铅同位素的有机猪肉溯源研究

采用不同的饲养方式,利用ICP-MS分别对有机猪肉和普通猪肉中的铅同位素比值进行测定。方差分析结果表明,铅同位素比值~(204)Pb/~(206)Pb,~(207)Pb/~(204)Pb,~(208)Pb/~(204)Pb,(~(207)Pb/~(208)Pb)/~(204)Pb,~(208)Pb/~(207)Pb/~(204)Pb具有显著性差异(P0.05),利用主成分分析和聚类分析等,得到相应的判别模型,该模型的初始分组正确率为100.0%,交叉验证正确率为85.0%。方法对有机猪肉能够有效溯源识别。     

四极杆电感耦合等离子体质谱法测定沉积物中Pb稳定同位素比率研究

本文采用四极杆电感耦合等离子体质谱法测定了玄武湖和莫愁湖,及其相连的河道表层沉积物中Pb稳定同位素的比率.沉积物中208Pb/206Pb和206Pb/207Pb的比率范围分别为2.0931～2.1239和1.1558～1.1845.玄武湖、莫愁湖、护城河等采样点Pb稳定同位素比率,与文献中长江江苏段沉积物相近.其它河道采样点Pb稳定同位素组成与文献中南京市大气、土壤Pb稳定同位素比率相近.     

汽油中痕量铅的电感耦合等离子体质谱法同位素比值分析

为建立汽油中痕量铅的等离子体质谱的同位素比值分析方法,考察使用了不同的样品处理手段处理汽油样品。结果表明,V(HNO3) V(H2O)=1 10体系萃取汽油,为汽油中同位素比值分析的最佳方法,其操作安全简单,方便快速,且灵敏度高,从而有效保证同位素比值分析的精确度。利用等离子体质谱仪对汽油中痕量铅的实际含量进行了分析,为配合城市大气铅污染来源调查工作提供了一种极为快速简捷、安全有效的手段。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.