New layered materials: syntheses, structures, and optical and magnetic properties of CsGdZnSe3, CsZrCuSe3, CsUCuSe3, and BaGdCuSe3

Four new quaternary selenides CsGdZnSe3, CsZrCuSe3, CsUCuSe3, and BaGdCuSe3 have been synthesized with the use of traditional high-temperature solid-state experimental methods. These compounds are isostructural with KZrCuS3, crystallizing with four formula units in the orthorhombic space group Cmcm. Cell constants (A) at 153 K are CsGdZnSe3 4.1684(7), 15.765(3), 11.0089(18); CsZrCuSe3 3.903(2), 15.841(10), 10.215(6); CsUCuSe3 4.1443(7), 15.786(3), 10.7188(18); and BaGdCuSe3 4.1839(6), 13.8935(19), 10.6692(15). The structure of these ALnMSe3 compounds (A = Cs, Ba; Ln = Zr, Gd, U; M = Cu, Zn) is composed of 2 to infinity [LnMSe3(n-)] (n = 1, 2) layers separated by A atoms. The Ln atom is octahedrally coordinated to six Se atoms, the M atom is tetrahedrally coordinated to four Se atoms, and the A atom is coordinated to a bicapped trigonal prism of eight Se atoms. Because there are no Se-Se bonds in the structure, the oxidation state of A is 1+ (Cs) or 2+ (Ba), that of Ln is 3+ (Gd) or 4+ (Zr, U), and that of M is 1+ (Cu) or 2+ (Zn). CsGdZnSe3 and BaGdCuSe3, which are paramagnetic, obey the Curie-Weiss law and have effective magnetic moments of 7.87(6) and 7.85(5) muB for Gd(3+), in good agreement with the theoretical value of 7.94 muB. Optical transitions at 1.88 and 2.92 eV for CsGdZnSe3 and 1.96 eV for BaGdCuSe3 were deduced from diffuse reflectance spectra.     

Analysis of the intermolecular interactions between CH3OCH3, CF3OCH3, CF3OCF3, and CH2F2, CHF3

The intermolecular interaction energy curves of CH(3)OCH(3)-CH(2)F(2), CF(3)OCH(3)-CH(2)F(2), CF(3)OCF(3)-CH(2)F(2), CH(3)OCH(3)-CHF(3), CF(3)OCH(3)-CHF(3), and CF(3)OCF(3)-CHF(3) complexes were calculated by the MP2 level ab initio molecular orbital method using the 6-311G** basis set augmented with diffuse polarization functions. We investigate the fluorine substitution effects of both methane and dimethyl ether on intermolecular interactions. In addition, orientation dependence of intermolecular interaction energies is also studied with utilizing eight types of orientations. Our analyses demonstrate that partial fluorinations of methane make electrostatic interaction dominant, and consequently enhance attractive interaction at several specific orientations. On the contrary, fluorine substitutions of dimethyl ether substantially decrease the electrostatic interaction between ether and CH(2)F(2) or CHF(3); thus, there is no such characteristic interaction between the C-H of fluorinated methane and ether oxygen of CF(3)OCF(3) as conventional hydrogen bonding, due to reduced polarity of fluorinated ether. The combination of different pairs of the electrostatic interaction is therefore responsible for the intermolecular interaction differences among the complexes investigated herein and also their orientations.     

Intermolecular vibrational spectra of C3v CXY3 Molecular Liquids, CHCl3, CHBr3, CFBr3, and CBrCl3

We report the quality anisotropic intermolecular vibrational spectra within the frequency range 0.5-800 cm(-1) of four C(3v) CXY(3) molecular liquids, CHCl(3), CHBr(3), CFBr(3), and CBrCl(3), by means of femtosecond optical-heterodyne-detected Raman-induced Kerr effect spectroscopy. The results show that the first moment of the intermolecular vibrational spectrum is proportional to the square root of the value of the surface tension divided by the liquid density. This implies that the intermolecular vibrational spectrum reflects the bulk properties of the liquids. To understand the molecular-level aspects of the intermolecular vibrational spectra of the liquids, the spectra are compared with the molecular properties such as molecular weight, rotational constants, and bimolecular interaction energy. Overall, the first moment of the spectrum moderately correlates to the inverse square roots of both the molecular weight and the fast rotational constant. Therefore, the molecular properties are responsible for the intermolecular vibrational spectrum. Plots of the first moment of the intermolecular vibrational spectrum vs the square root of the value of the simple bimolecular interaction energy divided by the molecular surface area and the molecular weight show a linear correlation in the case of the oblate symmetric top molecular liquids, CHCl(3), CHBr(3), and CFBr(3). However, CBrCl(3), which is a prolate symmetric top molecular liquid, does not show the same correlation for the oblate molecular liquids.     

An improved synthesis of 3-deazaeytosine, 3-deazauracil, 3-deazacytidine,and 3-deazauridine

3-Dcazacytosine (4-amino-2-pyridone, 3 ), 3-doazauracil (4-hydroxy-2-pyridone, 5 ), 3-deaza-cytidine (4-amino-1-β-D-ribofuranosyl-2-pyridonc, 9 ), and 3-deazauridine (4-hydroxy-1-β-D-ribo-furanosyl-2-pyridone, 11 ) were prepared in high overall yields from 1-methoxy-1-buten-3-yne ( 1 ). Ethyl 3,5,5-triethoxy-3-pentenoate ( 2 ), obtained from acylatioti of 1 with diethyl carbonate and subsequent in situ conjugate addition of ethoxide, was cyelized with ammonia to provide 3 . Diazotization of 3 and subsequent in situ hydroxydediazotization afforded 5 . Nucleoside 9 was obtained from the stannic chloride-catalyzed condensation of bis-trimethylsilylated 3 and 1-O-acetyl-2,3,5-tri-O-benzoyl-β-D-ribofuranose ( 7 ), followed by ammonolysis of the blocking groups. Diazotization of 9 and subsequent in situ hydroxydediazotization afforded nucleosidc 11 .     

Structure,Chemical Bonding and Properties of CoIn3, RhIn3, and IrIn3

CoIn₃, RhIn₃, and IrIn₃ were synthesized by reacting the elements in sealed tantalum tubes at 1170 K and subsequent annealing at 770 K. The structures of the three compounds (FeGa₃ type, space group P4₂/mnm) were refined from single crystal X-ray data: a = 682.82(6), c = 709.08(7) pm, wR2 = 0.0407, 397 F² values for CoIn₃, a = 698.28(8), c = 711.11(9) pm, wR2 = 0.0592, 418 F² values for RhIn₃, and a = 699.33(5), c = 719.08(5) pm, wR2 = 0.0625, 482 F² values for IrIn₃ with 16 parameters for each refinement. The structures may be considered as an intergrowth of tungsten-like building blocks of indium atoms and AlB₂-like slabs of compositions In&Co, In&Rh, and In&Ir, respectively. These are compared with the related intergrowth variants found for compounds with ordered U₃Si₂ and Zr₃Al₂ type structure. Semi-empirical band structure calculations for RhIn₃ reveal low density-of-states (DOS) at the Fermi level and negative Rh–Rh crystal orbital overlap populations (COOP) indicating antibonding Rh–Rh interactions. The bonding characteristics of CoIn₃, RuIn₃, and IrIn₃ are similar to RhIn₃. Magnetic susceptibility measurements of compact polycrystalline samples of CoIn₃, RhIn₃, and IrIn₃ indicate weak Pauli paramagnetism.     

Syntheses and Crystal Structures of the Novel Ternary Thioborates Na3BS3, K3BS3, and Rb3BS3

The orthothioborates Na₃BS₃, K₃BS₃ and Rb₃BS₃ were prepared from the metal sulfides, amorphous boron and sulfur in solid state reactions at temperatures between 923 and 973 K. In a systematic study on the structural cation influence on this type of ternary compounds, the crystal structures were determined by single crystal X‐ray diffraction experiments. Na₃BS₃ crystallizes in the monoclinic space group C2/c (No. 15) with a = 11.853(14) Å, b = 6.664(10) Å, c = 8.406(10) Å, β = 118.18(2)° and Z = 4. K₃BS₃ and Rb₃BS₃ are monoclinic, space group P2₁/c (No. 14) with a = 10.061(3) Å, b = 6.210(2) Å, c = 12.538(3) Å, β = 112.97(2) and a = 10.215(3) Å, b = 6.407(1) Å, c = 13.069(6) Å, β = 103.64(5)°, Z = 4. The potassium and rubidium compounds are not isotypic. All three compounds contain isolated [BS₃]^3– anions with boron in a trigonal‐planar coordination. The sodium cations in Na₃BS₃ are located between layers of orthothioborate anions, in the case of K₃BS₃ and Rb₃BS₃ stacks of [BS₃]^3– entities are connected via the corresponding cations. X‐ray powder patterns were measured and compared to calculated ones obtained from single crystal X‐ray structure determinations.     

Structure, stability, and spectra of C9H3, C11H3, and C13H3 radicals

Density functional theory has been used to investigate the geometries, vibrational frequencies, rotational constants, and dipole moments of the C(9)H(3), C(11)H(3), and C(13)H(3) radicals. Vertical electronic transition energies of C(9)H(3), C(11)H(3), and C(13)H(3) are calculated by the time-dependent density functional theory. Present results show that the most stable arrangements of C(9)H(3), C(11)H(3), and C(13)H(3) are H(2)C(9)H, H(2)C(11)H, and H(2)C(13)H with a C(2v) symmetry, respectively. Such lowest-energy isomers have an obvious single and triple bond alternation carbon chain. Their isomers HC(4)(HC)C(4)H, HC(4)[C(C(2)H)]C(4)H, and C(C(4)H)(3) are predicted to have vibrational frequencies and vertical excitation energies in good agreement with experimental observations. HC(4)(HC)C(4)H, HC(4)[C(C(2)H)]C(4)H, and C(C(4)H)(3) have similar trigonal structure, which gives rise to the remarkably similar spectroscopic features as obtained experimentally. On the basis of present calculations, the isomers HC(4)(HC)C(4)H, HC(4)[C(C(2)H)]C(4)H, and C(C(4)H)(3) of C(9)H(3), C(11)H(3), and C(13)H(3) radicals are most likely the carriers of the observed spectra.     

Structural, energetic, electronic, bonding, and vibrational properties of Ga3O, Ga3O2, Ga3O3, Ga2O3, and GaO3 clusters

The results of density functional theory based calculations on Ga3O, Ga3O2, Ga3O3, Ga2O3, and GaO3 clusters are reported here. A preference for planar arrangement of the constituent atoms maximizing the ionic interactions is found in the ground state of the clusters considered. The sequential oxidation of the metal-excess clusters increases the binding energy, but the sequential removal of a metal atom from the oxygen-excess clusters decreases the binding energy. The increase in the oxygen to metal ratio in these clusters is accompanied by increase in both electron affinity and ionization potential. The ionization induced structural distortions in the neutral clusters are relatively small, except those for Ga3O2. In anionic (cationic) clusters, the added (ionized) electron is shared by the Ga atoms, except in the case of GaO3. The vibrational frequencies and charge density analysis reveal the importance of the ionic Ga-O bond in stabilizing the gallium oxide clusters considered in this study.     

Synthesis of 3-hexahelicenol and its transformation to 3-hexahelicenylamines,diphenylphosphine, methyl carboxylate,and dimethylthiocarbamate

A nonphotochemical synthetic route to 3-hexahelicenol is reported. It involves a key [2+2+2] cycloisomerization of CH(3)O-substituted triyne that is readily available from 1-methoxy-3-methylbenzene and 1-bromo-2-(bromomethyl)naphthalene. Further functional group transformations led to 3-CO(2)CH(3), 3-NH(2), 3-PPh(2), and 3-SC(O)N(CH(3))(2) substituted hexahelicenes.     

Structural, electronic, and magnetic properties of UFeS3 and UFeSe3

Black prisms of UFeS(3) and UFeSe(3) have been synthesized by solid-state reactions of U, Fe, and S or Se with CsCl as a flux at 1173 K. The structure of these isostructural compounds consists of layers of edge- and corner-sharing FeS(6) or FeSe(6) octahedra that are separated by layers of face- and edge-sharing US(8) or USe(8) bicapped trigonal prisms. The isomer shifts in the iron-57 M?ssbauer spectra of both UFeS(3) and UFeSe(3) are consistent with the presence of high-spin iron(II) ions octahedrally coordinated to S or Se. The XANES spectra of UFeS(3) and UFeSe(3) are consistent with uranium(IV). Single-crystal magnetic susceptibility measurements along the three crystallographic axes of UFeSe(3) reveal a substantial magnetic anisotropy with a change of easy axis from the a-axis above 40 K to the b-axis below 40 K, a change that results from competition between the iron(II) and uranium(IV) anisotropies. The temperature dependence of the magnetic susceptibility along the three axes is characteristic of two-dimensional magnetism. A small shoulder-like anomaly is observed in the magnetic susceptibilities along the a- and b-axes at 96 and 107 K, respectively. Below 107 K, the iron-57 M?ssbauer spectra of UFeS(3) and UFeSe(3) show that the iron nuclei experience a magnetic hyperfine field that results from long-range magnetic ordering of at least the iron(II) magnetic moments because the field exhibits Brillouin-like behavior. Below 40 K there is no significant change in the M?ssbauer spectra as a result of change in magnetic anisotropy. The complexity of the iron-57 M?ssbauer spectra and the temperature and field dependencies of the magnetic properties point toward a complex long-range magnetic structure of two independent iron(II) and uranium(IV) two-dimensional sublattices. The temperature dependence of the single-crystal resistivity of UFeSe(3) measured along the a-axis reveals semiconducting behavior between 30 and 300 K with an energy gap of about 0.03 eV below the 53 K maximum in susceptibility, of about 0.05 eV between 50 and 107 K, and of 0.03 eV above 107 K; a negative magnetoresistance was observed below 60 K.     

Syntheses and Crystal Structures of BaAgTbS3, BaCuGdTe3, BaCuTbTe3, BaAgTbTe3, and CsAgUTe3

Five new quaternary chalcogenides of the 1113 family, namely BaAgTbS₃, BaCuGdTe₃, BaCuTbTe₃, BaAgTbTe₃, and CsAgUTe₃, were synthesized by the reactions of the elements at 1173–1273 K. For CsAgUTe₃ CsCl flux was used. Their crystal structures were determined by single‐crystal X‐ray diffraction studies. The sulfide BaAgTbS₃ crystallizes in the BaAgErS₃ structure type in the monoclinic space group C³,_2h‐C2/m, whereas the tellurides BaCuGdTe₃, BaCuTbTe₃, BaAgTbTe₃, and CsAgUTe₃ crystallize in the KCuZrS₃ structure type in the orthorhombic space group D¹_,2⁷_,h‐Cmcm. The BaAgTbS₃ structure consists of edge‐sharing [TbS₆^9–] octahedra and [AgS₅^9–] trigonal pyramids. The connectivity of these polyhedra creates channels that are occupied by Ba atoms. The telluride structure features ²_∞[MLnTe₃^2–] layers for BaCuGdTe₃, BaCuTbTe₃, BaAgTbTe₃, and ²_∞[AgUTe₃^1–] layers for CsAgUTe₃. These layers comprise [MTe₄] tetrahedra and [LnTe₆] or [UTe₆] octahedra. Ba or Cs atoms separate these layers. As there are no short Q ··· Q (Q = S or Te) interactions these compounds achieve charge balance as Ba²⁺M⁺Ln³⁺(Q^2–)₃ (Q = S and Te) and Cs⁺Ag⁺U⁴⁺(Te^2–)₃.     

The heats of formation of diazene, hydrazine, N2H3+, N2H5+, N2H, and N2H3 and the Methyl Derivatives CH3NNH, CH3NNCH3, and CH3HNNHCH3

The heats of formation of N(2)H, diazene (cis- and trans-N(2)H(2)), N(2)H(3), and hydrazine (N(2)H(4)), as well as their protonated species (diazenium, N(2)H(3)(+), and hydrazinium, N(2)H(5)(+)), have been calculated by using high level electronic structure theory. Energies were calculated by using coupled cluster theory with a perturbative treatment of the triple excitations (CCSD(T)) and employing augmented correlation consistent basis sets (aug-cc-pVnZ) up to quintuple-zeta, to perform a complete basis set extrapolation for the energy. Geometries were optimized at the CCSD(T) level with the aug-cc-pVDZ and aug-cc-pVTZ basis sets. Core-valence and scalar relativistic corrections were included, as well as scaled zero point energies. We find the following heats of formation (kcal/mol) at 0 (298) K: DeltaH(f)(N(2)H) = 60.8 (60.1); DeltaH(f)(cis-N(2)H(2)) = 54.9 (53.2); DeltaH(f)(trans-N(2)H(2)) = 49.9 (48.1) versus >/=48.8 +/- 0.5 (exptl, 0 K); DeltaH(f)(N(2)H(4)) = 26.6 (23.1) versus 22.8 +/- 0.2 (exptl, 298 K); DeltaH(f)(N(2)H(3)) = 56.2 (53.6); DeltaH(f)(N(2)H(3)(+)) = 231.6 (228.9); and DeltaH(f)(N(2)H(5)(+)) = 187.1 (182.7). In addition, we calculated the heats of formation of CH(3)NH(2), CH(3)NNH, and CH(3)HNNHCH(3) by using isodesmic reactions and at the G3(MP2) level. The calculated results for the hydrogenation reaction RNNR + H(2) --> RHNNHR show that substitution of an organic substituent for H improved the energetics, suggesting that these types of compounds may be possible to use in a chemical hydrogen storage system.     

HeI photoelectron spectroscopy and theoretical study of trichloromethanesulfenyl acetate, CCl3SOC(O)CH3, and trichloromethanesulfenyl trifluoroacetate, CCl3SOC(O)CF3

Two novel species, trichloromethanesulfenyl acetate, CCl(3)SOC(O)CH(3), and trichloromethanesulfenyl trifluoroacetate, CCl(3)SOC(O)CF(3), have been generated in situ by the heterogeneous reactions between trichloromethanesulfenyl chloride, CCl(3)SCl, and corresponding silver salts, silver acetate (AgOC(O)CH(3)) and silver trifluoroacetate (AgOC(O)CF(3)), respectively. Photoelectron spectroscopy and quantum chemical calculations are performed to investigate these two molecules, together with their precursor, CCl(3)SCl. Both of these two compounds may exist in the gas phase as a mixture of gauche and trans conformations. As for the dihedral angles delta(RSOR') of the gauche conformers, 107.0 degrees and 108.5 degrees are derived by theoretical calculations (at the B3LYP/6-311+G(3df) level) for CCl(3)SOC(O)CH(3) and CCl(3)SOC(O)CF(3), respectively. The first vertical ionization energies of CCl(3)SOC(O)CH(3) and CCl(3)SOC(O)CF(3), which have been determined by photoelectron spectroscopy, are 9.67 and 10.34 eV, respectively. According to the experimental results and theoretical analysis, the first ionization energy of these two molecules both come from the ionization of the lone pair electron of S atom.     

Synthesis, structure, and spectroscopic properties of Am(IO3)3 and the photoluminescence behavior of Cm(IO3)3

We have prepared Am(IO(3))(3) as a part of our continuing investigations into the chemistry of the 4f- and 5f-elements' iodates. Single crystals were obtained from the reaction of Am(3+) and H(5)IO(6) under mild hydrothermal conditions. Crystallographic data on an eight-day-old crystal are (21 degrees C, Mo Kalpha, lambda = 0.71073 Angstroms): monoclinic, space group P2(1)/c, a = 7.2300(5) Angstroms, b = 8.5511(6) Angstroms, c = 13.5361(10) Angstroms, beta = 100.035(1) degrees, V = 824.06(18), Z = 4. The structure consists of Am(3+) cations bound by iodate anions to form [Am(IO(3))(8)] units, where the local coordination environment around the americium centers is a distorted dodecahedron. There are three crystallographically unique iodate anions within the structure that bridge in both bidentate and tridentate fashions to form the overall three-dimensional structure. Repeated collection of X-ray diffraction data with time for a crystal of (243)Am(IO(3))(3) revealed an anisotropic expansion of the unit cell, presumably from self-irradiation damage, to generate values of a = 7.2159(7) Angstroms, b = 8.5847(8) Angstroms, c = 13.5715(13) Angstroms, beta = 99.492(4) degrees, V = 829.18(23) after approximately five months. The Am(IO(3))(3) crystals have also been characterized by Raman spectroscopy and the spectral results compared to those for Cm(IO(3))(3). Three strong Raman bands were observed for both compounds and correspond to the I-O symmetric stretching of the three crystallographically distinct iodate anions. The Raman profile suggests a lack of interionic vibrational coupling of the I-O stretching, while intraionic coupling provides symmetric and asymmetric components that correspond to each iodate site. Photoluminescence data for both Am(IO(3))(3) and Cm(IO(3))(3) are reported here for the first time. Assignments for the electronic levels of the actinide cations were based on these photoluminescence measurements and indicate the presence of vibronic coupling between electronic transitions and IO(3)(-) vibrational modes in both compounds.     

Synthesis of (2S,3R)-[3',3',3'-2H3]-valine and (2S,3S)-4-fluorovaline

A new synthesis of (2S,3R)-[3',3',3'-2H3]-valine has been completed and (2S,3S)-4-fluorovaline has been synthesised for the first time. Both compounds have been prepared by routes involving stereoselective addition to the (S)-pyroglutamate derivative and are available for studies in several areas of bio-organic chemistry.     

Novel synthesis, reactivity, and stereochemistry of substituted 3-trifluoromethyl- and 3-perfluoroalkyl-3-phenoxyprop-2-enal

Substituted 3-phenoxy-3-perfluoroalkylprop-2-enals 3a-s are synthesized in high yields starting from a gem-iodoacetoxy derivative 1 and phenoxides 2. Then efficient syntheses of push-pull derivatives 4, 5,8a,b, and nonconjugated analogues 6 and 7 illustrate the synthetic potentialities of 3. Stereochemical studies of these perfluoroalkyl-containing trisubstituted olefinic derivatives 3-8b revealed that the (4)J(CF) coupling constant observed in the (13)C NMR spectra was crucial in the determination of their configurations and conformations in solution. The solvent polarity effect on the stereochemistry of push-pull compounds 3-5 and 8a,b was studied. Unusual significant medium polarity effect on the stereochemistry of imino enol ether derivative 4 was observed.     

Syntheses and characterization of oxygen/sulfur-bridged incomplete cubane-type clusters, [Mo3S4Tp3]+ and [Mo3OS3Tp3]+, and a mixed-metal cubane-type cluster, [Mo3FeS4ClTp3]. X-ray structures of [Mo3S4Tp3]Cl, [Mo3OS3Tp3]PF6, and [Mo3FeS4ClTp3

The reaction of [Mo3S4(H2O)9]4+ (1) with hydrotris(pyrazolyl)borate (Tp) ligands produced [Mo3S4Tp3]Cl x 4 H2O ([3]Cl x 4 H2O) in an excellent yield. An X-ray structure analysis of [3]Cl x 4 H2O revealed that each molybdenum atom bonded to the Tp ligand. We report four salts of 3, [3]Cl x 4 H2O, [3]tof x 2 H2O, [3]PF6 x H2O, and [3]BF4 x 2 H2O in this paper. The solubility and stability of the chloride salt in organic solvents differ completely from those of the other salts. We have also prepared a new compound, [Mo3OS3Tp3]PF6 x H2O ([4]PF6 x H2O), via the reaction of [Mo3OS3(H2O)9]4+ (2) with KTp in the presence of NH4PF6. All the molybdenum atoms bonded to Tp ligand. 1H NMR signals corresponding to nine protons bonded to three pyrazole rings in one Tp were observed in a spectrum (at 253 K) of [3]BF4 x 2 H2O. It shows that cluster 3 has a 3-fold rotation axis in CD2Cl2 solution. Twenty-one 1H NMR signals corresponding to twenty-seven protons bonded to nine pyrazole rings in three Tp ligands were observed in a spectrum (at 233 K) of [4]PF6 x H2O; obviously, 4 has no 3-fold rotation axis, in contrast to 3. The short CH...mu3S distance caused large upfield chemical shifts in the 1H NMR spectra of 3 and 4. The reaction of 3 with metallic iron in CH2Cl2 produced [Mo3FeS4XTp3] (X = Cl (5), Br (6)). X-ray structure analysis of 5 has revealed the existence of a cubane-type core Mo3FeS4. Complex 3 functions as a metal-complex ligand for preparing a novel mixed-metal complex even in nonaqueous solvents. The cyclic voltammogram of 5 shows two reversible one-electron couples (E(1/2) = -1.40 and 0.52 V vs SCE) and two irreversible one-electron oxidation processes (E(pc) = 1.54 and 1.66 V vs SCE).     

Rhodium-103 NMR of [Rh(X)(PPh3)3] [X = Cl, N3, NCO, NCS, N(CN)2, NCBPh3, CNBPh3, CN] and derivatives containing CO, isocyanide, pyridine, H2 and O2. Ligand, solvent and temperature effects

Rhodium-103 chemical shifts are reported for 62 compounds, namely [Rh(X)(PPh3)3] [X = Cl, N3, NCO, NCS, N(CN)2, NCBPh3, CNBPh3, CN] and derivatives formed by replacement of a phosphine by CO, xylyl isocyanide (XNC) and pyridine and/or by oxidative addition of H2 or O2 to give trans-[Rh(X)(PPh3)2(CO)] (delta in the range -816 to -368 ppm) trans-[Rh(X)(PPh3)2(XNC)] (delta -817 to -250 ppm), cis-[Rh(X)(PPh3)2(py)] (the trans isomer is formed with X = CN, CNBPh3) (delta -233 to 170 ppm), [Rh(X)(H)2(PPh3)3] (delta -611 to 119), trans-[Rh(X)(H)2(PPh3)2(py)] (delta -30 to 566 ppm), [Rh(X)(O2)(PPh3)3] (delta 1393 to 3273 ppm) and cis-[Rh(X)(O2)(PPh3)2(py)] (delta 1949 to 3374 ppm). For the majority of these compounds data were obtained from solutions in chloroform and in toluene at temperatures of 247 and 300 K; for [Rh(X)(PPh3)3] (delta -562 to -4 ppm) data are reported at a number of temperatures in the range 195-300 K for solutions in chloroform, toluene and dichloromethane and at 300 K for solutions in DMSO. The expected trend to lower delta(103Rh) with decreasing temperature (vibrational shielding) is observed for the dichloromethane data, but data from solutions {of [Rh(X)(PPh3)3]} in chloroform and toluene show a number of features which diverge from this pattern, i.e. shifts to higher delta are found to accompany a decrease in temperature, most noticeably where X = CN and Cl [on changing the solvent from dichloromethane to chloroform changes in delta(103Rh) of up to 172 ppm are observed]. These results are interpreted in terms of a hydrogen-bonded interaction with the solvent that is enhanced by the presence of a polarizable ligand (CN, Cl). With a ligand (O2CCF3) that is only weakly polarizable the solvent dependence of delta(103Rh) is minimal.     

Facile Syntheses of pure Uranium(III) Halides: UF3, UCl3, UBr3, and UI3

Herein we describe a convenient lab scale synthesis for pure and solvent‐free binary uranium(III) halides UCl₃, UBr₃, and UI₃. This is achieved by the reduction of the respective uranium(IV) halides with elemental silicon in borosilicate ampoules at moderate temperature. The silicon tetrahalides SiX₄ formed as a side product are utilized for the removal of excess starting material via a chemical vapor transport reaction. The syntheses introduced herein avoid the need for pure metallic uranium and are based on uranium(IV) halides synthesized from UO₂ and the respective aluminum halides and purified by chemical vapor transport. These uranium(III) halides are obtained in single crystalline form. A similar reaction yields UF₃ as a microcrystalline powder. However, no beneficial transport reaction occurs with this halide. Also, a higher temperature has to be applied and steel ampoules have to be used. The identities and purity of the products were checked by powder X‐ray diffraction as well as IR spectroscopy. The synthesis of UI₃ enabled its crystal structure determination on single crystals for the first time. UI₃ crystallizes in the PuBr₃ structure type with space group type Cmcm and a = 4.3208(9), b = 13.923(3), c = 9.923(2) Å, V = 596.9(2) ų, and Z = 4 at T = 100 K.