Studies on pyrrolidinones. Synthesis of 1-[(N-acetylarylamino)methyl]pyroglutamic acid derivatives

Pyroglutamic acid was transformed into 1-[(N-Acetylarylamino)methyl]pyroglutamic acid derivatives by using trimethylsilyl variations of the Mannich reaction.     

Studies on pyrrolidinones. Synthesis of new α‐pyridones derivatives

Dimethyl 7‐methoxycarbonylmethyl‐5‐oxo‐1,2,3,5‐tetrahydro‐indolizine‐3,8‐dicarboxylate was synthesized starting from methyl pyroglutamate. A study was made of the reactions of this highly functionalized pyridone with ethyl iodide, selenium oxide, isoamyl nitrite and formaldehyde. Literature reports that reaction of 4‐(1‐carbomethoxypropyl)‐5‐carbomethoxy‐1,6‐cyclopentano‐2‐pyridone with formaldehyde lead to a 95% yield of a monolactone (26) precursor of camptothecin. Our experiments resulted in 15 % of this monolactone and 40% of a new dilactone (27) .     

Syntheses of N‐[3‐(1‐methyl‐1H‐2‐imidazolyl)propyl]benzamides and N‐[3‐(1‐methyl‐1H‐2‐imidazolyl)propyl]benzenesulfonamides

A series of substituted N‐(4‐substituted‐benzoyl)‐N‐[3‐(1‐methyl‐1H‐imidazol‐2‐yl)propyl]amines ( 13 ) and N‐arylsulfonyl‐N‐[3‐(1‐methyl‐1H‐imidazol‐2‐yl)propyl]amines ( 14 ) were prepared from the reaction of 3‐(1‐methyl‐1H‐imidazol‐2‐yl)propan‐1‐amine ( 7 ) with substituted benzoyl chloride or substituted‐benzene sulfonyl chloride respectively. Compound 7 was prepared by two independent methods.     

(E)‐3‐(Benzo[b]thiophen‐2‐yl)‐2‐(3,4,5‐trimethoxyphenyl)acrylonitrile and (Z)‐3‐(benzo[b]thiophen‐2‐yl)‐2‐(3,4‐dimethoxyphenyl)acrylonitrile

The title compounds, C₂₀H₁₇NO₃S, (I), and C₁₉H₁₅NO₂S, (II), were prepared by the reaction of benzo[b]thiophene‐2‐carbaldehyde with (3,4,5‐trimethoxyphenyl)acetonitrile and (3,4‐dimethoxyphenyl)acetonitrile, respectively, in the presence of methanolic potassium hydroxide. In (I), the C=C bond linking the benzo[b]thiophene and the 3,4,5‐trimethoxyphenyl units has E geometry, with dihedral angles between the plane of the bridging unit and the planes of the two adjacent ring systems of 5.2 (3) and 13.1 (2)°, respectively. However, in (II), the C=C bond has Z geometry, with dihedral angles between the plane of the bridging unit and the planes of the adjacent benzo[b]thiophene and 3,4‐dimethoxyphenyl units of 4.84 (17) and 76.09 (7)°, respectively. There are no significant intermolecular hydrogen‐bonding interactions in the packing of (I) and (II). The packing is essentially stabilized via van der Waals forces.     

Synthesis and biological activity of novel 1‐(2,3,4‐trimethoxyphenyl)‐2‐{[5‐(3,4,5‐trimethoxyphenyl)‐1,3,4‐thiadiazol‐2‐yl]thio}ethanone oxime ester derivatives

In a search for new fungicide and anticancer agent with improved biological properties and different bioactivity spectrum, we designed and synthesized a series of novel oxime esters containing 1,3,4‐thiadiazole group in moderate yield starting from gallic acid. The title compounds were identified by IR, ¹H NMR, ¹³C NMR and elemental analysis. The bioassay tests showed that these title compounds exhibit weak to moderate anticancer activity in vitro by MTT method.     

Biologically active 1‐arylpiperazines. Synthesis of N‐[3‐(4‐aryl‐1‐piperazinyl)propyl] derivatives of benzoxazinone and benzoxazolinone

The synthesis of new N‐[3‐(4‐aryl‐1‐piperazinyl)propyl] derivatives of 1H‐2,4‐benzoxazin‐3(4H)‐one ( 1a‐b ), 2H‐1,4‐benzoxazin‐3(4H)‐one ( 2a‐b, 3a‐b and 4b ), and benzoxazolin‐2‐one ( 5a‐b ), as biologically active agents, is described.     

Poly[[diaqua­cadmium(II)]‐μ4‐[N‐(phosphonato­methyl)ammonio]acetato]

The title compound, [Cd(C₃H₆NO₅P)(H₂O)₂]_n, is a three‐dimensional polymeric complex. The asymmetric unit contains one Cd atom, one N‐(phosphono­methyl)glycine zwitterion [(O⁻)₂OPCH₂NH₂⁺CH₂COO⁻] and two water mol­ecules. The coordination geometry is a distorted CdO₆ octa­hedron. Each N‐(phosphono­methyl)glycine ligand bridges four adjacent water‐coordinated Cd cations through three phospho­nate O atoms and one carboxyl­ate O atom, like a regular PO₄³⁻ group in zeolite‐type frameworks. One‐dimensional zigzag (–O—P—C—N—C—C—O—Cd–)_n chains along the [101] direction are linked to one another via Cd—O—P bridges and form a three‐dimensional network motif with three types of channel systems. The variety of O—H⋯O and N—H⋯O hydrogen bonds is likely to be responsible for stabilizing the three‐dimensional network structure and preventing guest mol­ecules from entering into the channels.     

4‐[2‐(3‐Methoxyphenyl)ethenyl]‐N‐methylpyridinium tetraphenylborate

In the title compound, C₁₅H₁₆NO⁺·C₂₄H₂₀B⁻, the pyridinium ring of the cation makes a dihedral angle of 4.3 (2)° with the benzene ring. Each is rotated in the same direction with respect to the central C—CH=CH—C linkage, by 10.0 (2) and 7.8 (2)°, respectively. The anions have a slightly distorted tetrahedral geometry. The most interesting feature of the structure is that the anions form a honeycomb‐like hexagonal structure down the b axis through C—H...π interactions. The hexagon is constructed from six BPh₄⁻ anions. The cations interact in a head‐to‐tail fashion along [010], forming chains, and pack antiparallel inside the above honeycomb‐like structure through C—H...π interactions.     

Structural comparison of three N‐(4‐halogenophenyl)‐N′‐[1‐(2‐pyridyl)ethylidene]hydrazine hydrochlorides

2‐{1‐[(4‐Chloroanilino)methylidene]ethyl}pyridinium chloride methanol solvate, C₁₃H₁₃ClN₃⁺·Cl⁻·CH₃OH, (I), crystallizes as discrete cations and anions, with one molecule of methanol as solvent in the asymmetric unit. The N—C—C—N torsion angle in the cation indicates a cis conformation. The cations are located parallel to the (02) plane and are connected through hydrogen bonds by a methanol solvent molecule and a chloride anion, forming zigzag chains in the direction of the b axis. The crystal structure of 2‐{1‐[(4‐fluoroanilino)methylidene]ethyl}pyridinium chloride, C₁₃H₁₃FN₃⁺·Cl⁻, (II), contains just one anion and one cation in the asymmetric unit but no solvent. In contrast with (I), the N—C—C—N torsion angle in the cation corresponds with a trans conformation. The cations are located parallel to the (100) plane and are connected by hydrogen bonds to the chloride anions, forming zigzag chains in the direction of the b axis. In addition, the crystal packing is stabilized by weak π–π interactions between the pyridinium and benzene rings. The crystal of (II) is a nonmerohedral monoclinic twin which emulates an orthorhombic diffraction pattern. Twinning occurs via a twofold rotation about the c axis and the fractional contribution of the minor twin component refined to 0.324 (3). 2‐{1‐[(4‐Fluoroanilino)methylidene]ethyl}pyridinium chloride methanol disolvate, C₁₃H₁₃FN₃⁺·Cl⁻·2CH₃OH, (III), is a pseudopolymorph of (II). It crystallizes with two anions, two cations and four molecules of methanol in the asymmetric unit. Two symmetry‐equivalent cations are connected by hydrogen bonds to a chloride anion and a methanol solvent molecule, forming a centrosymmetric dimer. A further methanol molecule is hydrogen bonded to each chloride anion. These aggregates are connected by C—H...O contacts to form infinite chains. It is remarkable that the geometric structures of two compounds having two different formula units in their asymmetric units are essentially the same.     

Synthesis of 6‐(5‐Methylisoxazol‐3yl)‐3‐alkyl Sulfanyl‐[1,2,4]triazolo‐[3,4‐b][1,3,4]thiadiazoles

A new series of isoxazole substituted fused triazolo‐thiadiazoles have been synthesized by the cyclocondensation of 5‐methylisoxazole‐3‐craboxylic acid and 4‐amino 1,2‐4‐triazole‐ 3,5‐dithiol using phosphorous oxychloride. The cyclised intermediate 6‐(5‐methylisoxazol‐3‐yl)‐[1,2,4]triazolo[3,4‐b][1,3,4]thiadiazole‐3‐thiol later on S‐alkylated with different alkyl halides in ethanol to give the title products in good to excellent yields.     

3‐[5‐(4‐Chlorophenyl)‐1‐(4‐methoxyphenyl)‐1H‐pyrazol‐3‐yl]propionic acid and the corresponding methyl ester

The synthesis of 3‐[5‐(4‐chlorophenyl)‐1‐(4‐methoxyphenyl)‐1H‐pyrazol‐3‐yl]propionic acid, C₁₉H₁₇ClN₂O₃, (I), and its corresponding methyl ester, methyl 3‐[5‐(4‐chlorophenyl)‐1‐(4‐methoxyphenyl)‐1H‐pyrazol‐3‐yl]propionate, C₂₀H₁₉ClN₂O₃, (II), is regiospecific. However, correct identification of the regioisomer formed by spectroscopic techniques is not trivial and single‐crystal X‐ray analysis provided the only means of unambiguous structure determination. Compound (I) crystallizes with Z′ = 2. The propionic acid groups of the two crystallographically unique molecules form a hydrogen‐bonded dimer, as is typical of carboxylic acid groups in the solid state. Conformational differences between the methoxybenzene and pyrazole rings give rise to two unique molecules. The structure of (II) features just one molecule in the asymmetric unit and the crystal packing makes greater use than (I) of weak C—H...A interactions, despite the lack of any functional groups for classical hydrogen bonding.     

Syntheses of 2‐alkylthio‐1‐[4‐(N‐α‐ethoxycarbonylbenzyl)‐aminobenzyl]‐5‐hydroxymethylimidazoles

Starting from the readily available p‐nitrobenzylamine a series of 2‐Alkylthio‐1‐[4‐(N‐α‐ethoxycarbonylbenzyl)aminobenzyl]‐5‐hydroxymethylirnidazoles were prepared.     

Synthesis of 4‐Imino‐2H,3H,5H‐[1,2,5]thiadiazolidin‐1‐oxide through Cycloaddition Reaction of N‐Sulphinylanilines and N‐(α‐Cyano‐α‐aryl)‐methylanilines

Through the normal mode of cycloaddition reaction of N‐(α‐cyano‐α‐aryl)‐methylanilines ( II ) onto N‐sulphinylanilines ( III ) has provided 2,3,5‐triaryl‐4‐imino‐2H,3H,5H‐[1,2,5]thiadiazolidin‐1‐oxides ( IV ). The present protocol has advantage of convenient operation to synthesize heterocyclics in good yield.     

Reaction of γ‐Hydroxy‐N‐[1‐(dimethylcarbamoyl)ethyl]butanamides under the ‘Direct Amide Cyclization’ Conditions

The preparation of the title compounds was achieved via the ‘azirine/oxazolone method’ starting from the corresponding γ‐hydroxy acids. Upon subjecting the γ‐hydroxy‐N‐[1‐(dimethylcarbamoyl)ethyl]butanamides 4 to the so‐called ‘direct amide cyclization’ (DAC) conditions, chlorinated acids 11 or imino lactones 12 were obtained as the sole products instead of the expected cyclodepsipeptides A or their cyclodimers (Scheme 4). Variation of the substituents in 4 did not affect the outcome of the reaction and a mechanism for the formation of both products from the intermediate oxazolone 13 has been proposed. Under the acidic conditions of the DAC, the imino lactones are formed as their HCl salts 12 , which, in polar solvents or on silica gel, reacted further to give the chlorinated acids 11 . Stabilization of the imino lactones was achieved by increasing the substitution in the five‐membered ring, and their structure, in the form of the hydrochlorides, was established independently by X‐ray crystallography (Fig. 4). A derivative 15 of the imino lactone 12a was prepared by the reaction with the 2H‐azirin‐3‐amine 10a ; its structure was also established by an X‐ray crystal‐structure determination (Fig. 3). Furthermore, the structures of the ω‐chloro acids 11a and 11b were determined by X‐ray crystallography (Fig. 2).     

Transformation of schiff bases derived from alpha‐naphthaldehyde. Synthesis,spectral data and biological activity of new‐3‐aryl‐2‐(α‐naphtyl)‐4‐thiazolidinones and N‐aryl‐N‐[1‐(α‐naphthyl)but‐3‐enyl]amines

New N‐aryl substituted 2‐(α‐naphthyl)‐4‐thiazolidinones were prepared by the cyclocondensation of α‐mercaptoacetic acid and corresponding N‐(α‐naphthyliden)anilines. The same starting materials were utilized to obtain a new series of N‐aryl‐N‐[1‐(α‐naphthyl)but‐3‐enyl]amines, which was synthesized through an addition of the Grignard reagent (allylmagnesium bromide) to the double bond C?N of the aldimines. The antichagasic and trichomonacidal in vitro activity, as well as, the antifungal and cytotoxic properties of some of these compounds were evaluated.     

N‐[1‐(Penta­fluoro­phenyl)­ethyl]­acetamide

The title compound, C₁₀H₈F₅NO, crystallizes as a racemate with four symmetry‐independent mol­ecules in the asymmetric unit. The four mol­ecules form two hydrogen‐bonded pairs. Each pair is a building unit of an independent C(4) chain propagating parallel to the ab plane.     

N,N′‐Dicyclohexyl‐N‐[4‐(1H‐indol‐3‐yl)butanoyl]urea

The title compound, C₂₅H₃₅N₃O₂, is a novel urea derivative. Pairs of intermolecular N—H...O hydrogen bonds join the molecules into centrosymmetric R₂²(12) and R₂²(18) dimeric rings, which are alternately linked into one‐dimensional polymeric chains along the [010] direction. The parallel chains are connected via C—H...O hydrogen bonds to generate a two‐dimensional framework structure parallel to the (001) plane. The title compound was also modelled by solid‐state density functional theory (DFT) calculations. A comparison of the molecular conformation and hydrogen‐bond geometry obtained from the X‐ray structure analysis and the theoretical study clearly indicates that the DFT calculation agrees closely with the X‐ray structure.