用固载强酸TiO2/SO42-催化甲基紫罗兰酮合成中的环化反应

研究了以固载强酸TiO2/SO4^2-作催化剂，用假性异甲基紫罗兰酮环化合成甲基紫罗兰酮的新方法，提高了α－异甲基紫罗兰酮的收率，获得了最佳反应条件;投料比n(假性异甲基紫罗兰酮）：n（甲苯）：n(硫酸）＝1：3．5：0．04，控制反应温度15－25℃，反应时间1．5h，该优化条件下，合成收率为93％－94％，产物中α－异甲基紫罗兰酮占78（wt)%左右。     

N-羟基邻苯二甲酰亚胺/Co(acac)_2催化的α-紫罗兰酮的氧化反应

以分子氧(O_2)为氧化剂,在无溶剂条件下,研究了N-羟基邻苯二甲酰亚胺/乙酰丙酮亚钴(Ⅱ)体系对α-紫罗兰酮的催化氧化反应,分析了氧化产物,主要得到α-紫罗兰酮的烯丙位氧化产物5-氧代-α-紫罗兰酮,同时生成少量环氧α-紫罗兰酮及重排产物4-氧代-β-紫罗兰酮和环氧β-紫罗兰酮,提出了可能的反应机理,化合物的结构经IR、~1H NMR、MS和EA等测试技术得以表征;为了提高5-氧代-α-紫罗兰酮的选择性和催化氧化反应的转化率,优化了催化氧化反应的工艺条件:当反应温度为70 ℃,氧气压力为1.0 Mpa,N-羟基邻苯二甲酰亚胺和乙酰丙酮亚钴(Ⅱ)用量分别为α-紫罗兰酮的25%和1.0%,反应10 h,5-氧代-α-紫罗兰酮的产率达53.4%,反应转化率达95.0%以上,平行实验表明,实验重复性良好.     

氮羟基邻苯二甲酰亚胺催化的α-紫罗兰酮的氧化反应

以分子氧（O₂）为氧化剂,在无溶剂条件下,研究了N-羟基邻苯二甲酰亚胺/乙酰丙酮亚钴(Ⅱ)体系对α-紫罗兰酮的催化氧化反应,分析了氧化产物,主要得到α-紫罗兰酮的烯丙位氧化产物5-氧代-α-紫罗兰酮,同时生成少量环氧α-紫罗兰酮及重排产物4-氧代-β-紫罗兰酮和环氧β-紫罗兰酮,提出了可能的反应机理,化合物的结构经IR, ¹H NMR, MS和EA等手段得以表征;为了提高5-氧代-α-紫罗兰酮的选择性和催化氧化反应的转化率,优化了催化氧化反应的工艺条件：当反应温度为70 ℃,氧气压力为1.0 MPa,N-羟基邻苯二甲酰亚胺和乙酰丙酮亚钴(Ⅱ)用量分别为α-紫罗兰酮的25%和1.0%,反应10 h,5-氧代-α-紫罗兰酮的产率达53.4%,反应转化率达95.0%以上,平行实验表明,实验重复性良好。     

4-氧代-β-紫罗兰酮合成方法的改进

对Kaiser报道的以α-紫罗兰酮为原料合成4-氧代-β-紫罗兰酮的方法进行了改进,研究了影响环氧化、开环和氧化的主要因素,探讨了分离纯化方法,其结构经MS、IR、1H-NMR、13C-NMR和元素分析进行了表征。磷钨酸可有效的催化过氧化氢氧化α-紫罗兰酮合成4,5-环氧-α-紫罗兰酮,当磷钨酸/过氧化氢摩尔比为5:100时,收率为85%;4,5-环氧-α-紫罗兰酮在甲醇钠催化下反应生成羟基紫罗兰酮,收率94％,纯度85％;经琥珀酸酐纯化,收率83％,纯度96％;再经异丙醇铝氧化、柱层析分离,4-氧代-β-紫罗兰酮的收率为93%,反应总收率从47.2%提高至61.7％。     

4，5-环氧-α-紫罗兰酮的合成研究

研究以H2O2为氧化剂,钨酸钠／磷酸／十六烷基氯化毗啶原位合成的过氧钨配合物催化α-紫罗兰酮合成4,5-环氧-α-紫罗兰酮的反应,考察了催化剂用量、反应温度、反应时间、pH值、溶剂及季铵盐等因素对反应的影响。结果表明,以1,2-二氯乙烷作溶剂,nα-紫罗兰酮：n钨酸钠：n磷酸：n十六烷基氯化吡啶：n过氧化氢=100：0.3：0．1：0．2：120,pH值为4．0,65℃的条件下反应6h,收率可达85％,其结构通过MS、^1H-NMR、IR、EA等检测技术进行表征。     

新型含紫罗兰酮基查尔酮的合成与表征

在碳酸钠和氢氧化钠催化下,β-紫罗兰酮和5,6-环氧-β-紫罗兰酮与芳香醛于室温下研磨1～15 min,制备了8种新型含紫罗兰酮基查尔酮,其结构经1H NMR、MS、IR和元素分析表征。 结果表明,β-紫罗兰酮、苯甲醛、Na2CO3与NaOH的物质的量比为20∶20∶5∶15时,收率可达87.1%～94.8%,苯甲醛环上吸电子基团可促进反应进行。     

基于联萘酚的有机Brφnsted酸高选择性催化合成α-紫罗兰酮

本文报道了由联萘酚衍生的有机磷酸小分子高选择性催化合成α-紫罗兰酮的一种新方法.考察了假紫罗兰酮环化生成目标产物紫罗兰酮的一系列影响因素,优化了反应条件,并提出了较为合理的机理解释.     

甲基葡萄糖苷硬脂酸酯及其聚氧丙烯醚的合成

以α-甲基葡萄糖苷和硬脂酸甲酯为原料,在碱性催化剂K2CO3和相转移催化剂四丁基氯化铵(TBAC)共同作用下,无溶剂法合成了甲基葡萄糖苷硬脂酸酯(SS),再与环氧丙烷反应,合成了甲基葡萄糖苷硬脂酸酯聚氧丙烯醚(SSP),并对产品进行了IR表征.探讨了相转移催化酯交换反应机理.研究了原料配比、催化剂种类及用量、反应温度、反应时间等因素对SS收率的影响,得到了合成SS的适宜工艺条件:n(甲基葡萄糖苷)∶ n(硬脂酸甲酯)=0.71∶ 1,w(K2CO3)∶ w(硬脂酸酸甲酯)=0.04∶ 1,w(TBAC)∶ w(硬脂酸甲酯)=0.05∶ 1,反应温度145℃,时间4.5h,压力6kPa.上述条件下,SS收率可达92%,产品质量较好.     

CeCl_3·7H_2O-NaI-SiO_2催化氨基苯硫酚与高位阻α,β-不饱和酮的迈克尔加成-缩合串联反应的研究

研究了复合型催化剂CeCl3·7H2O-NaI-SiO2催化氨基苯硫酚与高位阻α,β-不饱和酮(1a-1n)的迈克尔加成-缩合串联反应。结果表明,该催化剂能有效地催化高位阻α,β-不饱和酮与2-氨基苯硫酚和2-氨基-4-氯苯硫酚的迈克尔加成-缩合串联反应。其最优条件是:n(CeCl3·7H2O)∶n(NaI)∶n(SiO2)∶n(α,β-不饱和酮)=1∶2∶10∶2;溶剂为CHCl3,加热回流反应4h,反应收率较高(60%左右)。催化剂重复使用4次催化效果稳定。     

La(OTf)_3催化合成1,3-二噁烷-4,6-二酮化合物的研究

研究了在La(OTf)3的催化条件下,以丙二酸和酮为原料,缩合反应合成了3种1,3-二噁烷-4,6-二酮化合物.考察了酸酮物质的量之比、反应温度、反应时间、催化剂用量及催化剂的稳定性等因素对反应的影响.确定了其最佳反应条件为:取0.1mol丙二酸,n(丙二酸)∶n(酮)=1.0∶1.1,催化剂用量为0.3mol%,反应温度30℃,反应时间为3.0h,在上述反应条件下,产品收率可达62.3%～77.5%.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.