SiO2 溶胶及其静电自组装薄膜的制备

Silica sols were prepared by hydrolysis of Si（OC2H5）4（TEOS）using HCl,NH3·H2O,HCl/NH3·H2O as catalyzers,and the different granularities of SiO2 sols which catalyzed by HCl first and then NH3·H2O have the same terminal pH value were prepared. The silica colloidal particles were investigated with Transmission Electron Microscope（TEM）. The results showed sol catalyzed by HCl possesses very little particle,catalyzed by NH3·H2O has particle configuration,catalyzed by HCl/NH3·H2O possesses consecutive configuration. Poly（diallyldimethylammonium chloride）（PDDA）and SiO2 nanoparticulate complex thin films were prepared by electrostatic self-assembly multiplayer（ESAM）method. After assembling films,thin films surface conformation was observed with Electron Microscope and their transmittance was tested with 721 Spectrophotometer. The results showed that the silica sol catalyzed with HCl is not good for the fabrication of ESAM films and the silica sol catalyzed with HCl first and then NH3·H2O or by NH3·H2O only are very suitable for ESAM film fabrication. TEM data indicate that the microstructure of PDDA/ SiO2 prepared from silica sol catalyzed with HCl first and then NH3·H2O is consecutive and that the microstructure of PDDA/ SiO2 prepared from silica sol catalyzed by NH3·H2O only is particulate-parking like. The dependence of the transmittance of assembled films on the bilayer number of the films and the anti-scratching properties of the films were investigated. The results show that PDDA/ SiO2 films prepared from silica sol catalyzed by NH3·H2O only possess higher transmittance but lower anti-scratching properties. The effect of granularity of sols on optical performances of the thin films was studied,results showed the less the granularity of sol,the better the optical performances. For the sake of improving the light transmittance of films,we can reduce the granularity of sol,but it may play down its mechanical damage resist intensity.     

嵌段共聚物薄膜快速自组装方法

嵌段共聚物 (BCP) 薄膜可通过不同的退火方法诱导其微相分离,从而获得大面积圆柱状、层状和球状等纳米图案。这些长程有序的纳米结构形态,已经广泛应用在纳米光刻和电子器件等多个领域中。目前,有效且快速的退火方法仍然是BCP薄膜自组装技术中的研究热点。本文首先介绍了制备BCP薄膜纳米结构图案常用的退火技术,然后综述了三种新型快速退火技术,最后分析总结了这些退火技术的优缺点。     

树枝状大分子的自组装超薄膜

树枝状化合物因具有三维立体结构、均一的分布和多而密且可修饰性强的外官能团,使之作为结构单元进行自组装形成具有特色的超薄膜。Regen等利用整代聚酰胺－胺型（PAMAM）树状分子的胺端基,将其沉积到用Pt^2 离子活化的表面,重复这一过程即得到多层膜。Crook等首先报道了以共价键结合的树状分子膜,这种膜是将PAMAM树状分子的胺端基与巯基十一烷酸组成的单层膜作用生成酰胺键而形成的。Tsukruk等将表面分别带正负电荷的PAMAM树状分子在硅表面进行层状沉积形成超薄膜。研究显示,以树状分子为结构单元经自组装形成的膜具有潜在的用途前景,如作为化学探感器、多相催化剂、滤光片或光学器件基材等。     

自组装成膜技术制备TiO2薄膜的XPS研究

采用自组装成膜技术制备里TiO2薄膜,应用X射线光电子能谱研究自组装膜及其氧化膜和淀积的TiO2薄膜，结果表明，硅烷偶联剂成功地组装在玻璃基片上，足够长时间的氧化对使端基（-SH）完全氧化为磺酸基，淀积在基片上的TiO2膜牢固性好，平均膜厚在10nm．淀积膜中的钛可能有几种不同的氧化态，不同的酸度影响TiO2的淀积效果     

有序介孔氧化硅薄膜制备及其组装化学

本文综述了近年来利用有机模板法合成有序介孔二氧化硅薄膜的研究进展，重点阐述了两相界面外延生长和蒸发诱导自组装两种制备方法及其合成机理。此外，讨论了有序介孔二氧化硅薄膜的组装化学，包括金属元素掺杂，纳米粒子在介孔薄膜中的组装，以及有机物/二氧化硅纳米复合薄膜的制备，并对介孔二氧化硅薄膜未来的发展趋势做了展望。     

用自组装法制备聚合物纳米复合膜

文章比较了自组装法（ｓｅｌｆ－ａｓｓｅｍｂｌｙ,ＳＡ）与Ｌａｎｇｍｕｉｒ－Ｂｌｏｄｇｅｔｔ技术（ＬＢ）及其它方法在制备聚合物纳米复合膜时的优劣。ＳＡ法由于操作简单、膜的结构稳定性较高,因此较ＬＢ技术等具有更大的实用价值。利用ＳＡ法,可以制备各种有机聚电解质与其带相反电荷的有机聚电解质、粘土化合物及无机纳米颗粒等组成的聚合纳米复合膜。     

静电自组装铁电超薄膜及其性能研究

利用静电自组装方法在石英玻璃表面交替沉积聚二烯丙基二甲基氯化铵(PDDA)和聚偏氟乙烯(PVDF)超薄膜,制得PDDA/PVDF铁电复合超薄膜.通过石英晶体微天平实时监测超薄膜的沉积,研究了超薄膜的表面形貌、结构及电性能.结果表明,自组装每层PVDF超薄膜的厚度为7.5 nm;PDDA/PVDF铁电复合超薄膜的表面平整、均匀,其中C1s的光电子能谱与极化处理后充负电荷的PVDF铁电聚合物一致,但F1s由于溶解再组装过程而降低了0.3 eV;静电自组装材料纳米级的薄膜厚度和聚合物的络合作用导致了铁电复合超薄膜的非晶结构和高的表面电阻率.     

简单对流自组装制备层数可控有序阵列

利用简单的方法和较少的胶体乳液,在没有任何特殊设备的情况下制备出了二维和三维的有序阵列.通过控制胶体乳液浓度获得了层数可控的胶体晶体有序阵列.通过使用现有成膜模型模拟沉积行为揭示胶体晶体阵列在生长过程中控制冷凝蒸发过程的机理,对自组装过程中颗粒转移和溶剂蒸发之间的平衡细节进行了详细的讨论.利用阵列横截面的SEM显微照片来观测样品的厚度和均匀性,通过反射光谱来观察样品的光学性质.     

自组装超薄膜及其应用

自组装膜是指以价键或非价键相互作用在一定表面形成的具有某种特定结构、性能的单层或多层超薄膜。在自然界中 ,人们可以看到许多不同的组分通过自组装形成具有层状超分子结构的复杂体系 ,但直到 1 946年 ,人类才在清洁表面制备了单分子层膜[1] 。与分子束外延和化学气相沉积等制备膜的方法相比 ,以自组装方式形成的超薄膜具有有序性高、平整度好、膜的厚度分子水平可控以及不受基底形状限制等优点[2 ] 。近 1 0多年来 ,随着人们对界面化学研究的深入以及对具有特定功能的薄膜材料的需求 ,使自组装超薄膜的研究成为一个热点。本文从分类、…     

层层静电自组装构筑壳聚糖/磷钨酸复合膜的研究

将正电荷的壳聚糖与负电荷的磷钨酸溶液通过静电作用交替沉积在基底上组装复合多层膜。使用紫外可见光谱(UV-Vis)、红外光谱(FTIR)、X-射线光电子能谱(XPS)、原子力显微镜(AFM)和循环伏安法(CV)等手段对复合膜进行了表征。UV-Vis结果显示多层膜在特征吸收峰处的吸光度数值随膜双层数增加逐渐增大，呈良好的线性关系，表明多层膜是均匀组装的；XPS和FTIR结果证实了壳聚糖和磷钨酸被组装到膜上，AFM图形显示膜表面有一定的粗糙度，CV结果说明多层膜保留了磷钨酸的电化学性质。     

二氧化硅纳米粒子薄膜的制备及光学性能

以二氧化硅胶体和聚二烯丙基二甲基氯化铵(PDDA)为原料,利用静电自组装技术制备了PDDA/SiO2复合薄膜. TEM图象显示,薄膜中的SiO2纳米粒子为密堆积,薄膜均匀、致密;电子衍射实验结果显示,所组装的薄膜为非晶态膜.载玻片表面组装SiO2纳米粒子薄膜后,透射率随薄膜双层数增加呈现周期变化.薄膜具有增透作用,载玻片双面组装薄膜后在一定波长范围内的透射率可提高5％以上. PDDA/SiO2复合薄膜的光学性质主要由SiO2纳米粒子决定,每一双层的平均物理厚度小于SiO2纳米粒子的粒径,薄膜中存在层间穿插现象,逐层组装的复合薄膜具有单层光学薄膜的特性.     

聚苯乙烯-嵌段-聚丁二烯有序多孔膜在可收缩膜上的形变研究和光学性质

利用溶剂散逸自组装法在潮湿的条件下,制备了聚苯乙烯-聚丁二烯嵌段聚合物（PS-b-PB）有序多孔膜。 利用聚乙烯可收缩膜将PS-b-PB多孔膜进行两次收缩,形成小孔径的有序多孔膜。 通过收缩,膜上的孔由圆形变为长方形或者梭形,孔的尺寸从微米级收缩至亚微米级。 利用扫描电子显微镜对膜收缩过程中2种形状产生的机理进行了研究。 结果表明,PS-b-PB结合了聚苯乙烯（PS）和聚丁二烯（PB）两个均聚物的优点,收缩后仍然保持膜结构的平整性,从而将不可见的热场变化转变为可见的光学变化。     

Functional Polyoxometalate Thin Films via Electrostatic Layer-by-Layer Self-Assembly

Polyoxometalates (POMs) comprise a structurally diverse class of inorganic transition metal oxygen clusters which—owing to their unique electronic properties—hold promise for a host of technological applications such as electrochromic windows, sensors, or heterogeneous catalysts, prototypic examples of which will be briefly exemplified. The integration of POMs into functional architectures and devices, however, necessitates the development of general methods that allow positioning these clusters in well-defined supramolecular architectures, thin films, or mesophases. This short review highlights recent advances in the preparation of composite multilayers fabricated by electrostatic layer-by-layer self-assembly (ELSA) of POMs and a variety of water-soluble cationic species, including transition metal complexes, cationic surfactants, polycations and bipolar pyridine.     

苯胺四聚体-聚乙二醇-苯胺四聚体嵌段共聚物薄膜的自组装

以氨基封端的苯胺四聚体为基础,以甲苯2,4-二异氰酸酯(TDI)为中间体制备了苯胺四聚体-聚乙二醇-苯胺四聚体(ANI₄-PEG-ANI₄,PEG600,M_n＝600)嵌段共聚物,并溶于乙醇/N,N-二甲基甲酰胺(DMF)混合溶剂后,涂覆于导电玻璃(ITO)表面制备成薄膜,利用原子力显微镜(AFM)、紫外-可见光谱(UV-Vis)和循环伏安(CV)等研究了薄膜的自组装及电化学行为等,讨论了诱导溶剂对嵌段共聚物薄膜形态和性能的影响. 研究发现,通过改变混合溶剂比和诱导溶剂种类,ANI₄-PEG-ANI₄嵌段共聚物薄膜可以实现多种形态的转变.     

Pattern Formation in Thin Polymer Films Containing Conducting Polyaniline

Summary: In the present work knowledge the authors tried to direct the phase separation process in a thin polymer composite film to manufacture a polymer pattern via self organisation of the blend components. The Au substrate was modified by applying with a PDMS stamp a pattern of alternating stripes of a self-assembled monolayer. This in turn influenced the microstructure of the blend, allowing for the production of elongated domains repeating the pattern of the substrate. The blends studied in this work contained conducting polyaniline doped with camphorsulfonic acid or diphenyl phosphate and polystyrene. The role of the dopant was to induce electrical conductivity in polyaniline as well as to improve its solubility in common organic solvents. The microstructure of thin films was analysed using atomic force microscopy (AFM), dynamic secondary ion mass spectroscopy (dSIMS) and optical microscopy.